We analyze the imaging observations of an M-class eruptive flare of 2015 November, 4. The pre-eruptive H alpha filament was modelled by the non-linear force free field model, which showed that it consisted of two helical systems. Tether-cutting reconnection involving these two systems led to the formation of a hot sigmoidal loop structure rooted in a small hook that formed at the end of the flare ribbon. Subsequently, the hot loops started to slip away form the small hook until it disappeared. The loops continued slipping and the ribbon elongated itself by several tens of arc seconds. A new and larger hook then appeared at the end of elongated ribbon with hot and twisted loops rooted there. After the eruption of these hot loops, the ribbon hook expanded and later contracted. We interpret these observations in the framework of the recent three dimensional (3D) extensions to the standard solar flare model, which predict the drift of the flux rope footpoints. The hot sigmoidal loop is interpreted as the flux rope, whose footpoints drift during the eruption. While the deformation and drift of the new hook can be described by the model, the displacement of the flux rope footpoint from the filament to that of the erupting flux rope indicate that the hook evolution can be more complex than those captured by the model.
Formed through magnetic field shearing and reconnection in the solar corona, magnetic flux ropes are structures of twisted magnetic field, threaded along an axis. Their evolution and potential eruption are of great importance for space weather. Here we describe a new methodology for the automated detection of flux ropes in simulated magnetic fields, based on fieldline helicity. More robust than previous methods, it also allows the full volume extent of each flux rope structure to be determined. Our Flux Rope Detection and Organization (FRoDO) code is publicly available, and measures the magnet…
Coronal cavities have previously been observed associated with long-lived quiescent filaments and are thought to correspond to the associated magnetic flux rope. Although the standard flare model predicts a coronal cavity corresponding to the erupting flux rope, these have only been observed using broadband imaging data, restricting analysis to the plane-of-sky. We present a unique set of spectroscopic observations of an active region filament seen erupting at the solar limb in the extreme ultraviolet (EUV). The cavity erupted and expanded rapidly, with the change in rise phase contemporaneous…
We report microwave spectral imaging observations of an erupting magnetic flux rope during the early impulsive phase of the X8.2-class limb flare on 2017 September 10, obtained by the Expanded Owens Valley Solar Array. A few days prior to the eruption, when viewed against the disk, the flux rope appeared as a reverse S-shaped dark filament along the magnetic polarity inversion line. During the eruption, the rope exhibited a "hot channel" structure in extreme ultraviolet and soft X-ray passbands sensitive to ~10 MK plasma. The central portion of the flux rope was nearly aligned with the line of…
We carry out a three-dimensional magneto-hydrodynamic (MHD) simulation to model the initiation of the coronal mass ejection (CME) on 13 December 2006 in the emerging δ-sunspot active region NOAA 10930. The setup of the simulation is similar to a previous simulation by Fan (2011), but with a significantly widened simulation domain to accommodate the wide CME. The simulation shows that the CME can result from the emergence of a east-west oriented twisted flux rope whose positive, following emerging pole corresponds to the observed positive rotating sunspot emerging against the southern edge of t…
We present the Solar Dynamics Observatory observations of two flux ropes respectively tracked out by material from a surge and a failed filament eruption on 2012 July 29 and August 04. For the first event, the interaction between the erupting surge and a loop-shaped filament in the east seems to "peel off" the filament and add bright mass into the flux rope body. The second event is associated with a C-class flare that occurs several minutes before the filament activation. The two flux ropes are respectively composed of 85$\pm$12 and 102$\pm$15 fine-scale structures, with an average width of a…
Magnetic flux ropes (MFRs), sets of coherently twisted magnetic field lines, are believed as core structures of various solar eruptions. Their evolution plays an important role to understand the physical mechanisms of solar eruptions, and can shed light on adverse space weather near the Earth. However, the erupting MFRs are occasionally prevented by strong overlying magnetic fields, and the MFR evolution during the descending phase in the confined cases is lack of attention. Here, we present the deformation of an erupting MFR accompanied by a confined double-peaked solar flare. The first peak …
We study the early evolution of a hot-channel-like magnetic flux rope (MFR) toward eruption. Combining with imaging observation and magnetic field extrapolation, we find that the hot channel possibly originated from a pre-existing seed MFR with a hyperbolic flux tube (HFT). In the precursor phase, three-dimensional tether-cutting reconnection at the HFT is most likely resulting in the heating and buildup of the hot channel. In this process, the forming hot channel was rapidly enlarged at its spatial size and slipped its feet to two remote positions. Afterward, it instantly erupted outwards wit…
It is well known that solar flares have broad impacts on the low atmosphere, but it is largely unknown how they affect sunspot waves and oscillations. It is also under debate as to whether the flare-induced photospheric changes are due to the momentum conservation with coronal mass ejections or due to magnetic reconnection. To shed light on the so-called "back reaction" of solar eruptions, we investigated how running penumbral waves (RPWs) at one foot of an erupting magnetic flux rope (MFR) responds to the rope buildup and subsequent erosion. During the rope-buildup stage, the western foot of …
Existing 3D extensions to the standard model show that flux-rope footpoints are surrounded by curved-shaped QSL-footprints that can be related with hook-shaped flare-ribbons. We build upon this finding and further address the joint questions of their time-evolution, and of the formation of flare loops at the ends of flaring PILs of the erupting bipole, which are both relevant for flare understanding in general and for ICME studies in particular. We calculate QSLs and relevant field lines in an MHD simulation of a torus-unstable flux-rope. The evolving QSL footprints are used to define the oute…
The rotation of erupting filaments in the solar corona is addressed through a parametric simulation study of unstable, rotating flux ropes in bipolar force-free initial equilibrium. The Lorentz force due to the external shear field component and the relaxation of tension in the twisted field are the major contributors to the rotation in this model, while reconnection with the ambient field is of minor importance. Both major mechanisms writhe the flux rope axis, converting part of the initial twist helicity, and produce rotation profiles which, to a large part, are very similar in a range of sh…
It is well established that solar eruptions are powered by free magnetic energy stored in current-carrying magnetic field in the corona. It has also been generally accepted that magnetic flux ropes (MFRs) are a critical component of many coronal mass ejections (CMEs). What remains controversial is whether MFRs are present well before the eruption. Our aim is to identify progenitors of MFRs, and investigate pre-eruptive magnetic properties associated with these progenitors. Here we analyze 28 MFRs erupting within 45 deg from the disk center from 2010 to 2015. All MFRs'feet are well identified b…
The helical kink instability of a twisted magnetic flux tube has been suggested as a trigger mechanism for solar filament eruptions and coronal mass ejections (CMEs). In order to investigate if estimations of the pre-eruptive twist can be obtained from observations of writhe in such events, we quantitatively analyze the conversion of twist into writhe in the course of the instability, using numerical simulations. We consider the line tied, cylindrically symmetric Gold-Hoyle flux rope model and measure the writhe using the formulae by Berger and Prior which express the quantity as a single inte…
Radio, X-ray, and EUV signatures of internal and external reconnection of an erupting flux rope
Astronomical Institute of the Czech Academy of Sciences（捷克科学院天文研究所）；University of Applied Sciences and Arts Northwestern Switzerland（瑞士西北应用科学与艺术大学）；Space Sciences Laboratory, University of California Berkeley（加州大学伯克利分校空间科学实验室）；Leibniz-Institut für Astrophysik Potsdam (AIP)（波茨坦莱布尼茨天体物理研究所）；Astronomical Institute, Slovak Academy of Sciences（斯洛伐克科学院天文研究所）
We investigate the formation times of eruptive magnetic flux ropes relative to the onset of solar eruptions, which is important for constraining models of coronal mass ejection (CME) initiation. We inspected uninterrupted sequences of 131 Å images that spanned more than eight hours and were obtained by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) to identify the formation times of hot flux ropes that erupted in CMEs from locations close to the limb. The appearance of the flux ropes as well as their evolution toward eruptions were determined using morphol…
We report on observations of conversion of bright filament strands into flare loops during 2012 August 31 filament eruption. Prior to the eruption, individual bright strands composing one of the legs of the filament were observed in the 171 A filter channel data of the Atmospheric Imaging Assembly. After the onset of the eruption, one of the hooked ribbons started to propagate and contract, sweeping footpoints of the bright filament strands as well as coronal loops located close by. Later on, hot flare loops appeared in regions swept by the hook, where the filament strands were rooted. Timing …
Tracing magnetic flux rope footpoints in AR 12975 with coronal dimmings and data-driven magnetofrictional simulations
University of Helsinki（赫尔辛基大学）；University of Graz, Institute of Physics（格拉茨大学物理研究所）；University of Graz, Kanzelhöhe Observatory for Solar and Environmental Research（格拉茨大学坎泽勒霍厄太阳与环境研究天文台）；NorthWest Research Associates（西北研究协会）
Reconnection Jets Detected during the Footpoint Drift of a CME Flux Rope: New Signatures of Ongoing 3D Arcade-Flux Rope Reconnection
School of Physics and Astronomy, Yunnan University（云南大学物理与天文学院）；Department of Astronomy, Key Laboratory of Astroparticle Physics of Yunnan Province, Yunnan University（云南大学天文学系、云南省天体粒子物理重点实验室）；Shanghai Astronomical Observatory, Chinese Academy of Sciences（中国科学院上海天文台）
Electron acceleration in the solar corona is often associated with flares and the eruption of twisted magnetic structures known as flux ropes. However, the locations and mechanisms of such particle acceleration during the flare and eruption are still subject to much investigation. Observing the exact sites of particle acceleration can help confirm how the flare and eruption are initiated and how they evolve. Here we use the Atmospheric Imaging Assembly to analyse a flare and erupting flux rope on 2014-April-18, while observations from the Nancay Radio Astronomy Facility allows us to diagnose t…
AIM: To investigate several partially-erupting prominences to study their relationship with other CME-associated phenomena and to compare these observations with observables predicted by a model of partially-expelled flux ropes (Gibson & Fan, 2006a, b). METHODS: We have studied 6 selected events with partially-erupting prominences using multi wavelength observations recorded by the Extreme-ultraviolet Imaging Telescope (EIT), Transition Region and Coronal Explorer (TRACE), Mauna Loa Solar Observatory (MLSO), Big Bear Solar Observatory (BBSO) and soft X-ray telescope (SXT). The observational fe…
We present an analysis of the 15 February 2011 X-class solar flare, previously reported to produce the first sunquake in solar cycle 24 (Kosovichev 2011). Using acoustic holography, we confirm the first, and report a second, weaker, seismic source associated with this flare. We find that the two sources are located at either end of a sigmoid which indicates the presence of a flux rope. Contrary to the majority of previously reported sunquakes, the acoustic emission precedes the peak of major hard X-ray (HXR) sources by several minutes. Furthermore, the strongest hard X-ray footpoints derived f…
During eruptive solar flares and coronal mass ejections, a non-pot{\-}ential magnetic arcade with much excess magnetic energy goes unstable and reconnects. It produces a twisted erupting flux rope and leaves behind a sheared arcade of hot coronal loops. We suggest that: the twist of the erupting flux rope can be determined from conservation of magnetic flux and magnetic helicity and equipartition of magnetic helicity. It depends on the geometry of the initial pre-eruptive structure. Two cases are considered, in the first of which a flux rope is not present initially but is created during the e…
Magnetic flux ropes are the centerpiece of solar eruptions. Direct measurements for the magnetic field of flux ropes are crucial for understanding the triggering and energy release processes, yet they remain heretofore elusive. Here we report microwave imaging spectroscopy observations of an M1.4-class solar flare that occurred on 2017 September 6, using data obtained by the Expanded Owens Valley Solar Array. This flare event is associated with a partial eruption of a twisted filament observed in Hα by the Goode Solar Telescope at the Big Bear Solar Observatory. The extreme ultraviolet (EUV) a…
We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by SDO/AIA (end-on view) and displays a quasi vertical-thread structure. Bright U-shape/horn-like structure is observed surrounding the upper portion of the prominence at 171 angstrom before the eruption and becomes more prominent during the eruption. The disk view of STEREO-B shows that this long prominence is composed of a series of vertical threads and displays a half loop-like structure during the eruption. We focus on the magnetic support of the promin…
We firstly report the simultaneous activities of a slipping motion of flare loops and a slipping eruption of a flux rope in 131 Å and 94 Å channels on 2014 February 02. The east hook-like flare ribbon propagated slippingly at a speed of about 50 km s$^{-1}$, which lasted about 40 min and extended by more than 100 Mm, but the west flare ribbon moved in the opposite direction with a speed of 30 km s$^{-1}$. At the later phase of the flare activity, a "bi-fan" system of flare loops was well developed. The east footpoints of the flux rope showed an apparent slipping motion along the hook of the ri…
We report an observation of a partially erupting prominence and associated dynamical plasma processes based on observations recorded by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). The prominence first goes through a slow rise (SR) phase followed by a fast rise (FR). The slow rise phase started after a couple of small brightenings seen toward the footpoints. At the turning point from SR to FR, the prominence had already become kinked. The prominence shows strong brightening at the central kink location during the start of FR. We interpret this as intern…
A magnetic flux rope (FR), hosting hot plasma, is thought to be central to the physics of coronal mass ejection. Such FRs are widely observed with passbands of the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO), that are sensitive to emission from the hot plasma around 10 MK. In contrast, observations of warmer (around 1 MK) counterparts of FRs are sparse. In this study, we report the failed eruption of a multi-thermal FR, hosting both hot and warm plasma. On 2015 May 1, a hot channel appeared in the AIA high temperature passbands out of the southeastern solar …
We present the first IRIS Mg II slit-raster spectra that fully capture the genesis and coronal-jet-generating eruption of a central-disk solar minifilament. The minifilament arose in a negative-magnetic-polarity coronal hole. The Mg II spectroheliograms verify that the minifilament plasma temperature is chromospheric. The Mg II spectra show that the erupting minifilament's plasma has blueshifted upflow in the jet spire's onset and simultaneous redshifted downflow at the location of the compact jet bright point (JBP). From the Mg II spectra together with AIA EUV images and HMI magnetograms, we …
We investigate the footpoints of four erupted magnetic flux ropes (MFRs) that appear as sigmoidal hot channels prior to the eruptions in the Atmospheric Imaging Assembly high temperaure passbands. The simultaneous Helioseismic and Magnetic Imager observations disclose that one footpoint of the MFRs originates in the penumbra or penumbra edge with a stronger magnetic field, while the other in the moss region with a weaker magnetic field. The significant deviation of the axis of the MFRs from the main polarity inversion lines and associated filaments suggests that the MFRs have ascended to a hig…
The nature of three-dimensional reconnection when a twisted flux tube erupts during an eruptive flare or coronal mass ejection is considered. The reconnection has two phases: first of all, 3D "zipper reconnection" propagates along the initial coronal arcade, parallel to the polarity inversion line (PIL), then subsequent quasi-2D "main phase reconnection" in the low corona around a flux rope during its eruption produces coronal loops and chromospheric ribbons that propagate away from the PIL in a direction normal to it. One scenario starts with a sheared arcade: the zipper reconnection creates …
We report on three-dimensional (3D) Magnetohydrodynamic (MHD) simulations of recurrent eruptions in emerging flux regions. We find that reconnection of sheared fieldlines, along the polarity inversion line of an emerging bipolar region, leads to the formation of a new magnetic structure, which adopts the shape of a magnetic flux rope during its rising motion. Initially, the flux rope undergoes a slow-rise phase and, eventually, it experiences a fast-rise phase and ejective eruption towards the outer solar atmosphere. In total, four eruptions occur during the evolution of the system. For the fi…
We investigate the heating of an erupting prominence and loops associated with a coronal mass ejection and X-class flare. The prominence is seen in absorption in EUV at the beginning of its eruption. Later the prominence changes to emission, which indicates heating of the erupting plasma. We find the densities of the erupting prominence using the absorption properties of hydrogen and helium in different passbands. We estimate the temperatures and densities of the erupting prominence and loops seen as emission features using the differential emission measure method, which uses both EUV and X-ra…
A model for strongly writhing confined solar eruptions suggests an origin in the helical kink instability of a coronal flux rope which remains stable against the torus instability. This model is tested against the well observed filament eruption on 2002 May 27 in a parametric MHD simulation study which comprises all phases of the event. Good agreement with the essential observed properties is obtained. These include the confinement, terminal height, writhing, distortion, and dissolution of the filament, and the flare loops. The agreement is robust against variations in a representative range o…
We study the magnetic field structures of hard X-ray sources and flare ribbons of the M1.1 flare in active region NOAA 10767 on 2005 May 27. We have found in a nonlinear force-free field extrapolation, over the same polarity inversion line, a small pre-eruptive magnetic flux rope located next to sheared magnetic arcades. Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and Transition Region and Coronal Explorer (TRACE) observed this confined flare in the X-ray bands and ultraviolet (UV) 1600 Å\ bands, respectively. In this event magnetic reconnection occurred at several locations. It fir…
Context. Some of the most dynamic active regions are associated with complex photospheric magnetic configurations such as quadrupolar regions, and especially ones with a $δ$-spot configuration and a strong Polarity Inversion Line (PIL). Aims. We study the formation and eruption of magnetic flux ropes in quadrupolar regions. Methods. 3D MHD simulations of the partial emergence of a highly twisted flux tube from the solar interior into a non-magnetized stratified atmosphere. Results. We emerge two $Ω$-shaped loops forming a quadrupolar region. The emerging flux forms two initially separated bipo…
A bright prominence associated with a coronal mass ejection (CME) was seen erupting from the Sun on 9 April 2008. This prominence was tracked by both the Solar Terrestrial Relations Observatory (STEREO) EUVI and COR1 telescopes, and was seen to rotate about the line of sight as it erupted; therefore, the event has been nicknamed the "Cartwheel CME." The threads of the prominence in the core of the CME quite clearly indicate the structure of a weakly to moderately twisted flux rope throughout the field of view, up to heliocentric heights of 4 solar radii. Although the STEREO separation was 48 d…
We report on observations of the two newly-identified reconnection geometries involving erupting flux ropes. In 3D, a flux rope can reconnect either with a surrounding coronal arcade (recently named "ar-rf" reconnection) or with itself ("rr-rf" reconnection), and both kinds of reconnection create a new flux rope field line and a flare loop. For the first time, we identify all four constituents of both reconnections in a solar eruptive event, the filament eruption of 2011 June 07 observed by SDO/AIA. The ar-rf reconnection manifests itself as shift of one leg of the filament by more than 25" no…
This paper studies the magnetic topology of successively erupting active regions (ARs) 11429 and 12371. Employing vector magnetic field observations from Helioseismic and Magnetic Imager, the pre-eruptive magnetic structure is reconstructed by a model of non-linear force-free field (NLFFF). For all the five CMEs from these ARs, the pre-eruptive magnetic structure identifies an inverse-S sigmoid consistent with the coronal plasma tracers in EUV observations. In all the eruption cases, the quasi-separatrix layers (QSLs) of Large Q values are continuously enclosing core field bipolar regions in w…
Compound eruptions represent that multiple closely spaced magnetic structures erupt consecutively within a short interval, and then lead to a single flare and a single CME. However, it is still subtle for the links between multiple eruptions and the associated single flare or/and single CME. In this Letter, we report the compound eruptions of twin close flux ropes (FR1 and FR2) within a few minutes that resulted in a flare with a single soft X-ray peak and a CME with two cores. The successive groups of expanding loops and double peaks of intensity flux in AIA cool wavelengths indicate two epis…
We perform a numerical study of the evolution of a Coronal Mass Ejection (CME) and its interaction with the coronal magnetic field based on the May 12, 1997, CME event using a global MagnetoHydroDynamic (MHD) model for the solar corona. The ambient solar wind steady-state solution is driven by photospheric magnetic field data, while the solar eruption is obtained by superimposing an unstable flux rope onto the steady-state solution. During the initial stage of CME expansion, the core flux rope reconnects with the neighboring field, which facilitates lateral expansion of the CME footprint in th…
We present a multi-wavelength analysis of the eruption of a hot coronal channel associated with an X1.0 flare (SOL2013-10-28T02:03) from the active region NOAA 11875 by combining observations from AIA/SDO, HMI/SDO, RHESSI, and HiRAS. EUV images at high coronal temperatures indicated the presence of a hot channel at the core of the active region from the early pre-flare phase evidencing the pre-existence of a quasi-stable magnetic flux rope. The hot channel underwent an activation phase after a localized and prolonged pre-flare event occurring adjacent to one of its footpoints. Subsequently, th…
Electric currents play a critical role in the triggering of solar flares and their evolution. The aim of the present paper is to test whether the surface electric current has a surface or subsurface fixed source as predicts the circuit approach of flare physics, or is the response of the surface magnetic field to the evolution of the coronal magnetic field as the MHD approach proposes. Out of all 19 X-class flares as observed by SDO from 2011 to 2016 near the disk center, we analyzed the only 9 eruptive flares for which clear ribbon-hooks were identifiable. Flare ribbons with hooks are conside…
Multi-point study of the energy release and transport in the 28 March 2022, M4-flare using STIX, EUI, and AIA during the first Solar Orbiter nominal mission perihelion
With the global view and high-cadence observations from SDO/AIA and STEREO, many spatially separated solar eruptive events appear to be coupled. However, the mechanisms for "sympathetic" events are still largely unknown. In this study, we investigate the impact of an erupting flux rope on surrounding solar structures through large-scale magnetic coupling. We build a realistic environment of the solar corona on 2011 February 15 using a global magnetohydrodynamics (MHD) model and initiate coronal mass ejections (CMEs) in active region (AR) 11158 by inserting Gibson-Low analytical flux ropes. We …
We propose a new ``helicity-pumping'' method for energizing coronal equilibria that contain a magnetic flux rope (MFR) toward an eruption. We achieve this in a sequence of magnetohydrodynamics relaxations of small line-tied pulses of magnetic helicity, each of which is simulated by a suitable rescaling of the current-carrying part of the field. The whole procedure is ``magnetogram-matching'' because it involves no changes to the normal component of the field at the photospheric boundary. The method is illustrated by applying it to an observed force-free configuration whose MFR is modeled with …
In this Letter, we study the kinematic properties of ascending hot blobs associated with confined flares. Taking advantage of high-cadence extreme-ultraviolet images provided by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory, we find that for the 26 events selected here, the hot blobs are first impulsively accelerated outward, but then quickly slow down to motionlessness. Their velocity evolution is basically synchronous with the temporal variation of the Geostationary Operational Environmental Satellite soft X-ray flux of the associated flares, except that the veloci…
Context. Prominence eruptions provide key observations to understand the launch of coronal mass ejections as their cold plasma traces a part of the unstable magnetic configuration. Aims. We select a well observed case to derive observational constraints for eruption models. Methods. We analyze the prominence eruption and loop expansion and contraction observed on 02 March 2015 associated with a GOES M3.7 class flare (SOL2015-03-02T15:27) using the data from Atmospheric Imaging Assembly (AIA) and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). We study the prominence eruption…
It is widely believed that magnetic flux ropes are the key structure of solar eruptions; however, their observable counterparts are not clear yet. We study a flare associated with flux rope eruption in a comprehensive radiative magnetohydrodynamic simulation of flare-productive active regions, especially focusing on the thermodynamic properties of the plasma involved in the eruption and their relation to the magnetic flux rope. The pre-existing flux rope, which carries cold and dense plasma, rises quasi-statically before the eruption onsets. During this stage, the flux rope does not show obvio…
A magnetic flux rope structure is believed to exist in most coronal mass ejections (CMEs). However, it has been long debated whether the flux rope exists before eruption or is formed during eruption via magnetic reconnection. The controversy has been continuing because of our lack of routine measurements of the magnetic field in the pre-eruption structure, such as solar filaments. However, recently an indirect method was proposed to infer the magnetic field configuration based on the sign of helicity and the bearing direction of the filament barbs. In this paper, we apply this method to two er…
