AIM: To investigate several partially-erupting prominences to study their relationship with other CME-associated phenomena and to compare these observations with observables predicted by a model of partially-expelled flux ropes (Gibson & Fan, 2006a, b).
METHODS: We have studied 6 selected events with partially-erupting prominences using multi wavelength observations recorded by the Extreme-ultraviolet Imaging Telescope (EIT), Transition Region and Coronal Explorer (TRACE), Mauna Loa Solar Observatory (MLSO), Big Bear Solar Observatory (BBSO) and soft X-ray telescope (SXT). The observational features associated with partially-erupting prominences were then compared with the predicted observables from the model.
RESULTS: The partially-expelled-flux-rope (PEFR) model of Gibson & Fan (2006a, b) can explain the partial eruption of these prominences, and in addition predicts a variety of other CME-related observables that provide evidence for internal reconnection during eruption. We find that all of the partially-erupting prominences studied in this paper exhibit indirect evidence for internal reconnection. Moreover, all cases showed evidence of at least one observable unique to the PEFR model, e.g., dimmings external to the source region, and/or a soft X-ray cusp overlying a reformed sigmoid.
CONCLUSIONS: The PEFR model provides a plausible mechanism to explain the observed evolution of partially-erupting-prominence-associated CMEs in our study.
We investigate the heating of an erupting prominence and loops associated with a coronal mass ejection and X-class flare. The prominence is seen in absorption in EUV at the beginning of its eruption. Later the prominence changes to emission, which indicates heating of the erupting plasma. We find the densities of the erupting prominence using the absorption properties of hydrogen and helium in different passbands. We estimate the temperatures and densities of the erupting prominence and loops seen as emission features using the differential emission measure method, which uses both EUV and X-ra…
We report an observation of a partially erupting prominence and associated dynamical plasma processes based on observations recorded by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). The prominence first goes through a slow rise (SR) phase followed by a fast rise (FR). The slow rise phase started after a couple of small brightenings seen toward the footpoints. At the turning point from SR to FR, the prominence had already become kinked. The prominence shows strong brightening at the central kink location during the start of FR. We interpret this as intern…
We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by SDO/AIA (end-on view) and displays a quasi vertical-thread structure. Bright U-shape/horn-like structure is observed surrounding the upper portion of the prominence at 171 angstrom before the eruption and becomes more prominent during the eruption. The disk view of STEREO-B shows that this long prominence is composed of a series of vertical threads and displays a half loop-like structure during the eruption. We focus on the magnetic support of the promin…
We examine a small prominence eruption that occurred on 2014 May 1 at 01:35 UT and was observed by the Interface Region Imaging Spectrometer (IRIS) and the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO). Pre- and post-eruption images were taken by the X-Ray Telescope (XRT) on Hinode. Pre-eruption, a dome-like structure exists above the prominence, as demarcated by coronal rain. As the eruption progresses, we find evidence for reconnection between the prominence magnetic field and the overlying field. Fast flows are seen in AIA and IRIS, indicating reconnection outfl…
A large polar-crown prominence composed of different segments spanning nearly the entire solar disk erupted on 2010 December 6. Prior to the eruption, the filament in the active region part splits into two layers: a lower layer and an elevated layer. The eruption occurs in several episodes. Around 14:12 UT, the lower layer of the active region filament breaks apart, one part ejects towards the west, while the other part ejects towards the east, which leads to the explosive eruption of the eastern quiescent filament. During the early rise phase, part of the quiescent filament sheet displays str…
A bright prominence associated with a coronal mass ejection (CME) was seen erupting from the Sun on 9 April 2008. This prominence was tracked by both the Solar Terrestrial Relations Observatory (STEREO) EUVI and COR1 telescopes, and was seen to rotate about the line of sight as it erupted; therefore, the event has been nicknamed the "Cartwheel CME." The threads of the prominence in the core of the CME quite clearly indicate the structure of a weakly to moderately twisted flux rope throughout the field of view, up to heliocentric heights of 4 solar radii. Although the STEREO separation was 48 d…
We present a detailed three-dimensional (3D) view of a prominence eruption, coronal loop expansion, and coronal mass ejections (CMEs) associated with an M4.4 flare that occurred on 2011 March 8 in the active region NOAA 11165. Full-disk H$α$ images of the flare and filament ejection were successfully obtained by the Flare Monitoring Telescope (FMT) following its relocation to Ica University, Peru. Multiwavelength observation around the H$α$ line enabled us to derive the 3D velocity field of the H$α$ prominence eruption. Features in extreme ultraviolet were also obtained by the Atmospheric Imag…
Detection of Doppler velocity differences between ions and neutrals in an erupting prominence
Astronomical Observatory, Kyoto University（京都大学天文台）；College of Science and Engineering, Ritsumeikan University（立命馆大学理工学部）；National Solar Observatory（国家太阳观测台）
In this paper, we report the multiwavelength observations of an erupting prominence and the associated CME on 13 May 2013. The event occurs behind the western limb in the field of view of SDO/AIA. The prominence is supported by a highly twisted magnetic flux rope and shows rapid rotation in the counterclockwise direction during the rising motion. The rotation of the prominence lasts for $\sim$47 minutes. The average period, angular speed, and linear speed are $\sim$806 s, $\sim$0.46 rad min$^{-1}$, and $\sim$355 km s$^{-1}$, respectively. The total twist angle reaches $\sim$7$π$, which is cons…
We report observations of a unique, large prominence eruption that was observed in the He II 304 Å passband of the the Extreme Ultraviolet Imager/Full Sun Imager telescope aboard Solar Orbiter on 15-16 February 2022. Observations from several vantage points (Solar Orbiter, the Solar-Terrestrial Relations Observatory, the Solar and Heliospheric Observatory, and Earth-orbiting satellites) were used to measure the kinematics of the erupting prominence and the associated coronal mass ejection. Three-dimensional reconstruction was used to calculate the deprojected positions and speeds of different …
Spectroscopic observations of prominence eruptions associated with coronal mass ejections (CMEs), although relatively rare, can provide valuable plasma and 3D geometry diagnostics. We report the first observations by the Interface Region Imaging Spectrograph (IRIS) mission of a spectacular fast CME/prominence eruption associated with an equivalent X1.6 flare on 2014 May 9. The maximum plane-of-sky and Doppler velocities of the eruption are 1200 and 460 km/s, respectively. There are two eruption components separated by ~200 km/s in Doppler velocity: a primary, bright component and a secondary, …
The background field is assumed to play prime role in the erupting structures like prominences. In the flux rope models, the critical decay index ($n_c$) is a measure of the rate at which background field intensity decreases with height over the flux rope or erupting structure. In the real observations, the critical height of the background field is unknown, so a typical value of $n_{c}=1.5$ is adopted from the numerical studies. In this study, we determined the $n_c$ of 10 prominence eruptions (PEs). The prominence height in 3D is derived from two-perspective observations of \textit{Solar Dyn…
Context. Prominence eruptions provide key observations to understand the launch of coronal mass ejections as their cold plasma traces a part of the unstable magnetic configuration. Aims. We select a well observed case to derive observational constraints for eruption models. Methods. We analyze the prominence eruption and loop expansion and contraction observed on 02 March 2015 associated with a GOES M3.7 class flare (SOL2015-03-02T15:27) using the data from Atmospheric Imaging Assembly (AIA) and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). We study the prominence eruption…
We investigate triggering, activation, and ejection of a solar eruptive prominence that occurred in a multi-polar flux system of active region NOAA 11548 on 2012 August 18 by analyzing data from AIA on board SDO, RHESSI, and EUVI/SECCHI on board STEREO. Prior to the prominence activation, we observed striking coronal activities in the form of a blowout jet which is associated with rapid eruption of a cool flux rope. Further, the jet-associated flux rope eruption underwent splitting and rotation during its outward expansion. These coronal activities are followed by the prominence activation dur…
We present a new method for determining the column density of erupting filament material using state-of-the-art multi-wavelength imaging data. Much of the prior work on filament/prominence structure can be divided between studies that use a polychromatic approach with targeted campaign observations, and those that use synoptic observations, frequently in only one or two wavelengths. The superior time resolution, sensitivity and near-synchronicity of data from the Solar Dynamics Observatory's Advanced Imaging Assembly allow us to combine these two techniques using photo-ionisation continuum opa…
This work deals with the study of an erupting prominence embedded in the core of a CME and focuses on the derivation of the prominence plasma filling factor. We explore two methods to measure the prominence plasma filling factor that are based on the combination of visible-light and ultraviolet spectroscopic observations. Theoretical relationships for resonant scattering and collisional excitation are used to evaluate the intensity of the H I Lyman-α and Lyman-β lines, in two prominence points where simultaneous and cospatial LASCO-C2 and UVCS data were available. Thermodynamic and geometrical…
The eruption of a large quiescent prominence on 17 August 2013 and associated coronal mass ejection (CME) were observed from different vantage points by Solar Dynamics Observatory (SDO), Solar-Terrestrial Relations Observatory (STEREO), and Solar and Heliospheric Observatory (SOHO). Screening of the quiet Sun by the prominence produced an isolated negative microwave burst. We estimated parameters of the erupting prominence from a model of radio absorption and measured from 304 Å images. Their variations obtained by both methods are similar and agree within a factor of two. The CME development …
Prominences or filaments are cool clouds of partially ionized plasma living in the solar corona. Ground- and space-based observations have confirmed the presence of oscillatory motions in prominences and they have been interpreted in terms of magnetohydrodynamic (MHD) waves. Existing observational evidence points out that these oscillatory motions are damped in short spatial and temporal scales by some still not well known physical mechanism(s). Since prominences are partially ionized plasmas, a potential mechanism able to damp these oscillations could be ion-neutral collisions. Here, we will …
Solar prominences are partially ionised plasmas displaying flows and oscillations. These oscillations show time and spatial damping and, commonly, have been explained in terms of magnetohydrodynamic (MHD) waves. We study the spatial damping of linear non-adiabatic MHD waves in a flowing partially ionised plasma, having prominence-like physical properties. We consider single fluid equations for a partially ionised hydrogen plasma including in the energy equation optically thin radiation, thermal conduction by electrons and neutrals, and heating. Keeping the frequency real and fixed, we have sol…
Magnetic flux ropes are the centerpiece of solar eruptions. Direct measurements for the magnetic field of flux ropes are crucial for understanding the triggering and energy release processes, yet they remain heretofore elusive. Here we report microwave imaging spectroscopy observations of an M1.4-class solar flare that occurred on 2017 September 6, using data obtained by the Expanded Owens Valley Solar Array. This flare event is associated with a partial eruption of a twisted filament observed in Hα by the Goode Solar Telescope at the Big Bear Solar Observatory. The extreme ultraviolet (EUV) a…
Prominences are partially ionized, magnetized plasmas embedded in the solar corona. Damped oscillations and propagating waves are commonly observed. These oscillations have been interpreted in terms of magnetohydrodynamic (MHD) waves. Ion-neutral collisions and non-adiabatic effects (radiation losses and thermal conduction) have been proposed as damping mechanisms. We study the effect of the presence of helium on the time damping of non-adiabatic MHD waves in a plasma composed by electrons, protons, neutral hydrogen, neutral helium (He I), and singly ionized helium (He II) in the single-fluid …
We demonstrate that major asymmetries in erupting filaments and CMEs, namely major twists and non-radial motions are typically related to the larger-scale ambient environment around eruptive events. Our analysis of prominence eruptions observed by the STEREO, SDO and SOHO spacecraft shows that prominence spines retain, during the initial phases, the thin ribbon-like topology they had prior to the eruption. This topology allows bending, rolling, and twisting during the early phase of the eruption, but not before. The combined ascent and initial bending of the filament ribbon is non-radial in th…
Although the real shapes and trajectories of erupting solar prominences in three dimensions have been intensively studied, the three-dimensional (3D) shapes of stable prominences before eruptions have not been measured accurately so far. We intend to make such a measurement to constrain 3D prominence models and to extend our knowledge of prominences. Using multiperspective observations from the Atmospheric Imaging Assembly on board SDO and the Extreme Ultraviolet Imager on board STEREO, we reconstructed 3D coordinates of three stable prominences: a quiescent, an intermediate, and a mixed type.…
Multi-wavelength observations of prominence eruptions provide an opportunity to uncover the physical mechanism of the triggering and the evolution process of the eruption. In this paper, we investigated an erupting prominence on October 14, 2012, recorded in Hα, EUV, and X-ray wavelengths. The process of the eruption gives evidences on the existence of a helical magnetic structure and showing the twist being converting to writhe. The estimated twist is ~6π (3 turns), exceeding the threshold of the kink instability. The rising plasma then reached a high speed, estimated at 228 km s-1, followed …
At which height will a prominence inclined to be unstable, or where is the most probable critical height for the prominence destabilization? This question is statistically studied based on 362 solar limb prominences well-recognized by SLIPCAT from 2007 April to the end of 2009. We found that there are about 71% disrupted prominences (DPs), among which about 42% of them did not erupt successfully and about 89% of them experienced a sudden destabilization (SD) process. After a comprehensive analysis of the DPs, the following findings are discovered. (1) Most DPs become unstable at the height of …
There is observational evidence of the presence of small-amplitude transverse magnetohydrodynamic (MHD) waves with a wide range of frequencies in the threads of solar prominences. It is believed that the waves are driven at the photosphere and propagate along the magnetic field lines up to prominences suspended in the corona. The dissipation of MHD wave energy in the partially ionized prominence plasma is a heating mechanism whose relevance needs to be explored. Here we consider a simple 1D model for a non-uniform thin thread and investigate the heating associated with dissipation of Alfven wa…
We study Rayleigh-Taylor instability (RTI) at the coronal-prominence boundary by means of 2.5D numerical simulations in a single-fluid MHD approach including a generalized Ohm's law. The initial configuration includes a homogeneous magnetic field forming an angle with the direction in which the plasma is perturbed. For each field inclination we compare two simulations, one for the pure MHD case, and one including the ambipolar diffusion in the Ohm's law, otherwise identical. We find that the configuration containing neutral atoms is always unstable. The growth rate of the small-scale modes in …
We investigate the nature of dissipative instability at the boundary (seen here as tangential discontinuity) between the viscous corona and the partially ionised prominence plasma in the incompressible limit. The importance of the partial ionisation is investigated in terms of the ionisation fraction. Matching the solutions for the transversal component of the velocity and total pressure at the interface between the prominence and coronal plasmas, we derive a dispersion relation whose imaginary part describes the evolution of the instability. Results are obtained in the limit of weak dissipati…
The rotation of erupting filaments in the solar corona is addressed through a parametric simulation study of unstable, rotating flux ropes in bipolar force-free initial equilibrium. The Lorentz force due to the external shear field component and the relaxation of tension in the twisted field are the major contributors to the rotation in this model, while reconnection with the ambient field is of minor importance. Both major mechanisms writhe the flux rope axis, converting part of the initial twist helicity, and produce rotation profiles which, to a large part, are very similar in a range of sh…
Multi-Viewpoint Observation of a Failed Prominence Eruption on the Sun
NASA Goddard Space Flight Center（美国国家航空航天局戈达德太空飞行中心）；Northumbria University（诺森比亚大学）；University of Graz（格拉茨大学）；New Jersey Institute of Technology（新泽西理工学院）；University of New Hampshire（新罕布什尔大学）
Coronal rain clumps and prominence knots are dense condensations with chromospheric to transition region temperatures that fall down in the much hotter corona. Their typical speeds are in the range 30--150~km~s$^{-1}$ and of the order of 10--30~km~s$^{-1}$, respectively, i.e., they are considerably smaller than free fall velocities. These cold blobs contain a mixture of ionized and neutral material that must be dynamically coupled in order to fall together, as observed. We investigate this coupling by means of hydrodynamic simulations in which the coupling arises from the friction between ions…
This present study deals with the dissipative instability that appears in a compressible partially ionised plasma slab embedded in a uniform magnetic field, modelling the state of the plasma in solar prominences. In the partially ionised plasma, the dominant dissipative effect is the Cowling resistivity. The regions outside the slab (modelling the solar corona) are fully ionised, and the dominant mechanism of dissipation is viscosity. Analytical solutions to the extended magnetohydrodynamic (MHD) equations are found inside and outside of the slab and solutions are matched at the boundaries of …
We investigate the nature of dissipative instability appearing in a prominence planar thread filled with partially ionised plasma in the incompressible limit. The importance of partial ionisation is investigated in terms of the ionisation factor and wavelength of waves propagating in the slab. To highlight the role of partial ionisation, we have constructed models describing various situations we can meet in solar prominence fine structure. Matching the solutions for the transversal component of the velocity and total pressure at the interfaces between the prominence slab and surrounding plasm…
Oscillations and propagating waves are commonly seen in high-resolution observations of filament threads, i.e., the fine-structures of solar filaments/prominences. Since the temperature of prominences is typically of the order of 10^4 K, the prominence plasma is only partially ionized. In this paper, we study the effect of neutrals on the wave propagation in a filament thread modeled as a partially ionized homogeneous magnetic flux tube embedded in an homogeneous and fully ionized coronal plasma. Ohmic and ambipolar magnetic diffusion are considered in the basic resistive MHD equations. We num…
In this paper, we present multiwavelength observations of helical kink instability as a trigger of a CME which occurred in AR NOAA 11163 on 24 February 2011. The CME was associated with a M3.5 limb flare. High resolution observations from SDO/AIA suggest the development of helical kink instability in the erupting prominence, which implies a flux rope structure of the magnetic field. A brightening starts below the apex of the prominence with its slow rising motion (~100 km/s) during the activation phase. A bright structure, indicative of a helix with ~3-4 turns, was transiently formed at this p…
Context. Recent observations of solar prominences show the presence of turbulent flows that may be caused by Kelvin-Helmholtz instabilites (KHI). However, the observed flow velocities are below the classical threshold for the onset of KHI in fully ionized plasmas. Aims. We investigate the effect of partial ionization on the onset of KHI in dense and cool cylindrical magnetic flux tubes surrounded by a hotter and lighter environment. Methods. The linearized governing equations of a partially ionized two-fluid plasma are used to describe the behavior of small-amplitude perturbations superimposed…
Polar crown prominences are made of chromospheric plasma partially circling the Suns poles between 60 and 70 degree latitude. We aim to diagnose the 3D dynamics of a polar crown prominence using high cadence EUV images from the Solar Dynamics Observatory (SDO)/AIA at 304 and 171A and the Ahead spacecraft of the Solar Terrestrial Relations Observatory (STEREO-A)/EUVI at 195A. Using time series across specific structures we compare flows across the disk in 195A with the prominence dynamics seen on the limb. The densest prominence material forms vertical columns which are separated by many tens o…
Motivated by the need to improve the ability to forecast whether a certain coronal mass ejection (CME) is to impact Earth, and by the insufficiency of statistical studies that analyze the whole erupting system with the focus on the governing conditions under CME deflections, we performed a careful analysis of 13 events along a one-year time interval showing large deflections from their source region. We used telescopes imaging the solar corona at different heights and wavelengths on board the Project for Onboard Autonomy 2 (PROBA2), Solar Dynamics Observatory (SDO), Solar TErrestrial RElations…
We intend to provide a comprehensive answer to the question on whether all Coronal Mass Ejections (CMEs) have flux rope structure. To achieve this, we present a synthesis of the LASCO CME observations over the last sixteen years, assisted by 3D MHD simulations of the breakout model, EUV and coronagraphic observations from STEREO and SDO, and statistics from a revised LASCO CME database. We argue that the bright loop often seen as the CME leading edge is the result of pileup at the boundary of the erupting flux rope irrespective of whether a cavity or, more generally, a 3-part CME can be identi…
Cool and dense prominences found in the solar atmosphere are known to be partially ionized because of their relative low temperature. In this Letter, we address the long-standing problem of how the neutral component of the plasma in prominences is supported against gravity. Using the multiple fluid approach we solve the time-dependent equations in two dimensions considering the frictional coupling between the neutral and ionized components of the magnetized plasma representative of a solar prominence embedded in a hot coronal environment. We demonstrate that given an initial density enhancemen…
We present a detailed multi-wavelength study of the M6.2 flare which was associated with a confined eruption of a prominence using TRACE, RHESSI, and NoRH observations. The pre-flare phase of this event is characterized by spectacular large-scale contraction of overlying extreme ultraviolet (EUV) coronal loops during which the loop system was subjected to an altitude decrease of ~20 Mm for an extended span of ~30 min. This contraction phase is accompanied by sequential EUV brightenings associated with hard X-ray (HXR) (up to 25 keV) and microwave (MW) sources from low-lying loops in the core o…
High resolution observations have permitted to resolve the solar prominences/filaments as sets of threads/fibrils. However, the values of the physical parameters of these threads and their structuring remain poorly constrained. We use prominence seismology techniques to analyse transverse oscillations in threads through the comparison between magnetohydrodynamic (MHD) models and observations. We apply Bayesian methods to obtain two different types of information. We first infer the marginal posterior distribution of physical parameters, such as the magnetic field strength or the length of the …
We present the results of the observations of a coronal mass ejection (CME), which occurred on May 13, 2009. The most important feature of these observations is that the CME was observed from the very early stage (the solar surface) up to a distance of 15 solar radii ($R_\odot$). Below 2 $R_\odot$, we used the data from the TESIS EUV telescopes obtained in the Fe 171 A and He 304 A lines, and above 2 $R_\odot$, we used the observations of the LASCO C2 and C3 coronagraphs. The CME was formed at a distance of 0.2-0.5 $R_\odot$from the Sun's surface as a U-shaped structure, which was observed bot…
In astrophysical systems with partially ionized plasma the motion of ions is governed by the magnetic field while the neutral particles can only feel the magnetic field's Lorentz force indirectly through collisions with ions. The drift in the velocity between ionized and neutral species plays a key role in modifying important physical processes like magnetic reconnection, damping of magnetohydrodynamic waves, transport of angular momentum in plasma through the magnetic field, and heating. This paper investigates the differences between Doppler velocities of calcium ions and neutral hydrogen in…
A three-dimensional (3D) reconstruction of the 2007, May 20 partial-halo Coronal Mass Ejection (CME) has been made using STEREO/EUVI and STEREO/COR1 coronagraphic images. The trajectory and kinematics of the erupting filament have been derived from EUVI image pairs with the "tie-pointing" triangulation technique, while the polarization ratio technique has been applied to COR1 data to determine the average position and depth of the CME front along the line of sight. These 3D geometrical information have been combined for the first time with spectroscopic measurements of the OVI $λλ$1031.91, 103…
We present RHESSI and TRACE observations of multiple flare activity that occurred in the active region NOAA 10656 over the period of two hours on 2004 August 18. Out of four successive flares, there were three events of class C while the final event was a major X1.8 solar eruptive flare. The events during the pre-eruption phase, i.e., before the X1.8 flare, are characterized by localized episodes of energy release occurring in the vicinity of an active region filament which produced intense heating along with non-thermal emission. A few minutes before the eruption, the filament undergoes an ac…
We present observations and modeling of the magnetic field configuration, morphology, and dynamics of a large-scale, high-latitude filament eruption observed by the Solar Dynamics Observatory. We analyze the 2015 July 9-10 filament eruption and the evolution of the resulting coronal mass ejection (CME) through the solar corona. The slow streamer-blowout CME leaves behind an elongated post-eruption arcade above the extended polarity inversion line that is only poorly visible in extreme ultraviolet (EUV) disk observations and does not resemble a typical bright flare-loop system. Magnetohydrodyna…
A Possible Stellar CME Event Associated with a Long-duration Optical Flare on the RS CVn-type Star UX Arietis
International Centre of Supernovae (ICESUN), Yunnan Key Laboratory of Supernova Research, Yunnan Observatories, Chinese Academy of Sciences（中国科学院云南天文台）；Key Laboratory for the Structure and Evolution of Celestial Objects, Chinese Academy of Sciences（中国科学院天体结构与演化重点实验室）；Yunnan Observatories, Chinese Academy of Sciences（中国科学院云南天文台）；School of Astronomy and Space Science, University of Chinese Academy of Sciences（中国科学院大学天文与空间科学学院）
We present a detailed analysis of a confined filament eruption and jet associated with a C1.5 class solar flare. Multi-wavelength observations from GONG and SDO reveal the filament forming over several days following the emergence and then partial cancellation of a minority polarity spot within a decaying bipolar active region. The emergence is also associated with the formation of a 3D null point separatrix that surrounds the minority polarity. The filament eruption occurs concurrent with brightenings adjacent to and below the filament, suggestive of breakout and flare reconnection, respectiv…
