It is not fully understood why some solar filaments erupt while others do not. Those that do typically undergo a slow rise followed by an acceleration phase, though this transition requires further investigation. Erupting prominences have been observed to heat up during the acceleration phase, but the origin of this heating remains unclear. Moreover, some coronal mass ejections possess additional fine structure in white-light observations beyond the classical three-part morphology. We aim to elaborate on the dynamics of erupting prominences, investigate the heating during the acceleration phase, and correlate our findings with observations. We employ the open-source MPI-AMRVAC code to solve the 2.5D MHD equations on a coronal domain extending to 300 Mm, using adaptive mesh refinement to attain high resolution. Controlled combinations of footpoint shearing and converging motions applied to an initial magnetic arcade produce erupting flux ropes with self-consistent prominence and coronal rain formation due to thermal instability. We find both non-erupting and erupting cases related to the system energization. Comparison with observations from the AIA Filament Eruption Catalog shows that the slow-rise and impulsive phases are modulated by magnetic reconnection. The transition to acceleration corresponds to an increase in the inflow Alfvén Mach number. Thermal conduction and compressional heating can lead to prominence evaporation. We obtain nested circular fine structure in EUV images of the ejected flux ropes, partly resulting from plasmoid interactions. We conclude that internal heating processes and magnetic reconnection play key roles in the early evolution of CMEs.
Erupting filaments are sometimes observed to undergo a rotation about the vertical direction as they rise. This rotation of the filament axis is generally interpreted as a conversion of twist into writhe in a kink-unstable magnetic flux rope. Consistent with this interpretation, the rotation is usually found to be clockwise (as viewed from above) if the post-eruption arcade has right-handed helicity, but counterclockwise if it has left-handed helicity. Here, we describe two non--active-region filament events recorded with the Extreme-Ultraviolet Imaging Telescope (EIT) on the {\it Solar and He…
A filament eruption, accompanied by a B9.5 flare, coronal dimming and an EUV wave, was observed by the Solar TERrestrial Relations Observatory (STEREO) on 19 May 2007, beginning at about 13:00 UT. Here, we use observations from the SECCHI/EUVI telescopes and other solar observations to analyze the behavior and geometry of the filament before and during the eruption. At this time, STEREO A and B were separated by about 8.5 degrees, sufficient to determine the three-dimensional structure of the filament using stereoscopy. The filament could be followed in SECCHI/EUVI 304 A stereoscopic data from…
The full 3-D vector magnetic field of a solar filament prior to eruption is presented. The filament was observed with the Facility Infrared Spectropolarimeter at the Dunn Solar Telescope in the chromospheric He i line at 10830 Å on May 29 and 30, 2017. We inverted the spectropolarimetric observations with the HAnle and ZEeman Light (HAZEL) code to obtain the chromospheric magnetic field. A bimodal distribution of field strength was found in or near the filament. The average field strength was 24 Gauss, but prior to the eruption we find the 90th percentile of field strength was 435 Gauss for th…
Coronal cavities have previously been observed associated with long-lived quiescent filaments and are thought to correspond to the associated magnetic flux rope. Although the standard flare model predicts a coronal cavity corresponding to the erupting flux rope, these have only been observed using broadband imaging data, restricting analysis to the plane-of-sky. We present a unique set of spectroscopic observations of an active region filament seen erupting at the solar limb in the extreme ultraviolet (EUV). The cavity erupted and expanded rapidly, with the change in rise phase contemporaneous…
Using high spatial and temporal data from the New Vacuum Solar Telescope (NVST) and the Solar Dynamics Observatory (SDO), we present unambiguous observations of recurrent two-sided loop jets caused by magnetic reconnection between erupting minifilaments and nearby large filament. The observations demonstrate that three two-sided loop jets, which ejected along the large filament in opposite directions, had similar appearance and originated from the same region. We find that a minifilament erupted and drove the first jet. It reformed at the same neutral line later, and then underwent partial and…
Magnetic flux ropes are the centerpiece of solar eruptions. Direct measurements for the magnetic field of flux ropes are crucial for understanding the triggering and energy release processes, yet they remain heretofore elusive. Here we report microwave imaging spectroscopy observations of an M1.4-class solar flare that occurred on 2017 September 6, using data obtained by the Expanded Owens Valley Solar Array. This flare event is associated with a partial eruption of a twisted filament observed in Hα by the Goode Solar Telescope at the Big Bear Solar Observatory. The extreme ultraviolet (EUV) a…
Solar filaments exist as stable structures for extended periods of time before many of them form the core of a CME. We examine the properties of an erupting filament on 2017 May 29--30 with high-resolution He I 10830 A and Halpha spectra from the Dunn Solar Telescope, full-disk Dopplergrams of He I 10830 A from the Chromospheric Telescope, and EUV and coronograph data from SDO and STEREO. Pre-eruption line-of-sight velocities from an inversion of He I with the HAZEL code exhibit coherent patches of 5 Mm extent that indicate counter-streaming and/or buoyant behavior. During the eruption, indivi…
A filament eruption was observed with the Siberian Solar Radio Telescope (SSRT) on June 23 2012, starting around 06:40 UT, beyond the West limb. The filament could be followed in SSRT images to heights above 1 Rs, and coincided with the core of the CME, seen in LASCO C2 images. We discuss briefly the dynamics of the eruption: the top of the filament showed a smooth acceleration up to an apparent velocity of 1100 km/s. Images behind the limb from STEREO-A show a two ribbon flare and the interaction of the main filament, located along the primary neutral line, with an arch-like structure, orient…
A large polar-crown prominence composed of different segments spanning nearly the entire solar disk erupted on 2010 December 6. Prior to the eruption, the filament in the active region part splits into two layers: a lower layer and an elevated layer. The eruption occurs in several episodes. Around 14:12 UT, the lower layer of the active region filament breaks apart, one part ejects towards the west, while the other part ejects towards the east, which leads to the explosive eruption of the eastern quiescent filament. During the early rise phase, part of the quiescent filament sheet displays str…
On 2010 August 1, a global solar event was launched involving almost the entire Earth-facing side of the Sun. This event mainly consisted of a C3.2 flare, a polar crown filament eruption and two Earth-directed coronal mass ejections (CMEs). The observations from the Solar Dynamics Observatory (SDO) and the Solar Terrestrial Relations Observatory (STEREO) showed that all the activities were coupled together, suggesting a global character of the magnetic eruption. We reconstruct the three-dimensional geometry of the polar crown filament using observations from three different viewpoints (STEREO …
The ubiquitous solar jets or jet-like activities are generally regarded as an important source of energy and mass input to the upper solar atmosphere and the solar wind. However, questions about their triggering and driving mechanisms are not completely understood. By taking advantage of high temporal and high spatial resolution stereoscopic observations taken by the Solar Dynamic Observatory (SDO) and the Solar Terrestrial Relations Observatory (STEREO), we report an intriguing two-sided-loop jet occurred on 2013 June 02, which was dynamically associated with the eruption of a mini-filament b…
The helical kink instability of a twisted magnetic flux tube has been suggested as a trigger mechanism for solar filament eruptions and coronal mass ejections (CMEs). In order to investigate if estimations of the pre-eruptive twist can be obtained from observations of writhe in such events, we quantitatively analyze the conversion of twist into writhe in the course of the instability, using numerical simulations. We consider the line tied, cylindrically symmetric Gold-Hoyle flux rope model and measure the writhe using the formulae by Berger and Prior which express the quantity as a single inte…
We studied the dynamics of the solar atmosphere in the region of a large quiet-Sun filament, which erupted on 21 October 2010. The filament eruption started at its northern end and disappeared from the H$α$ line-core filtergrams line within a few hours. The very fast motions of the northern leg were recorded in ultraviolet light by AIA. We aim to study a wide range of available datasets describing the dynamics of the solar atmosphere for five days around the filament eruption. This interval covers three days of the filament evolution, one day before the filament growth and one day after the er…
We present the Solar Dynamics Observatory observations of two flux ropes respectively tracked out by material from a surge and a failed filament eruption on 2012 July 29 and August 04. For the first event, the interaction between the erupting surge and a loop-shaped filament in the east seems to "peel off" the filament and add bright mass into the flux rope body. The second event is associated with a C-class flare that occurs several minutes before the filament activation. The two flux ropes are respectively composed of 85$\pm$12 and 102$\pm$15 fine-scale structures, with an average width of a…
It has been revealed that the magnetic topology in the solar atmosphere displays hemispheric preference, i.e., negative/positive helicity in the northern/southern hemisphere, respectively. However, the strength of the hemispheric rule and its cyclic variation are controversial. In this paper, we apply a new method based on filament drainage to 571 erupting filaments from 2010 May to 2015 December in order to determine the filament chirality and its hemispheric preference. It is found that $91.6\%$ of our sample of erupting filaments follow the hemispheric rule of helicity sign. It is found tha…
We report on observations of conversion of bright filament strands into flare loops during 2012 August 31 filament eruption. Prior to the eruption, individual bright strands composing one of the legs of the filament were observed in the 171 A filter channel data of the Atmospheric Imaging Assembly. After the onset of the eruption, one of the hooked ribbons started to propagate and contract, sweeping footpoints of the bright filament strands as well as coronal loops located close by. Later on, hot flare loops appeared in regions swept by the hook, where the filament strands were rooted. Timing …
Flares and CMEs are very powerful events in which energetic radiation and particles are ejected within a short time. These events thus can strongly affect planets that orbit these stars. This is particularly relevant for planets of M-stars, because these stars stay active for a long time during their evolution and yet potentially habitable planets orbit at short distance. Unfortunately, not much is known about the relation between flares and CMEs in M-stars as only very few CMEs have so far been observed in M-stars. In order to learn more about flares and CMEs on M-stars we monitored the activ…
We analyze the observations of EUV loop evolution associated with the filament eruption located at the border of an active region. The event SOL2013-03-16T14:00 was observed with a large difference of view point by the Solar Dynamics Observatory and Solar Terrestrial Relations Observatory --A spacecraft. The filament height is fitted with the sum of a linear and exponential function. These two phases point to different physical mechanisms such as: tether-cutting reconnection and a magnetic instability. While no X-ray emission is reported, this event presents the classical eruption features lik…
We report on interaction of the legs of the erupting filament of 2012 August 31 and associated prominent supra-arcade downflows (P-SADs) as observed by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory. We employ a number of image processing techniques to enhance weak interacting features. As the filament erupts, both legs stretch outwards. The positive-polarity leg also untwists and splits into two parts. The first part runs into the conjugate (negative-polarity) leg, tearing it apart. The second part then converges into the remnant of the conjugate leg, after which both…
Radio, X-ray, and EUV signatures of internal and external reconnection of an erupting flux rope
Astronomical Institute of the Czech Academy of Sciences（捷克科学院天文研究所）；University of Applied Sciences and Arts Northwestern Switzerland（瑞士西北应用科学与艺术大学）；Space Sciences Laboratory, University of California Berkeley（加州大学伯克利分校空间科学实验室）；Leibniz-Institut für Astrophysik Potsdam (AIP)（波茨坦莱布尼茨天体物理研究所）；Astronomical Institute, Slovak Academy of Sciences（斯洛伐克科学院天文研究所）
The 2015 March 15 coronal mass ejection as one of the two that together drove the largest geomagnetic storm of solar cycle 24 so far was associated with sympathetic filament eruptions. We investigate the relations between the different filaments involved in the eruption. A surge-like small-scale filament motion is confirmed as the trigger that initiated the erupting filament with multi-wavelength observations and using a forced magnetic field extrapolation method. When the erupting filament moved to an open magnetic field region, it experienced an obvious acceleration process and was accompani…
Magnetic reconnection, the rearrangement of magnetic field topology, is a fundamental physical process in magnetized plasma systems all over the universe1,2. Its process is difficult to be directly observed. Coronal structures, such as coronal loops and filament spines, often sketch the magnetic field geometry and its changes in the solar corona3. Here we show a highly suggestive observation of magnetic reconnection between an erupting solar filament and its nearby coronal loops, resulting in changes in connection of the filament. X-type structures form when the erupting filament encounters th…
We study the formation and evolution of a failed filament eruption observed in NOAA active region 11121 near the southeast limb on November 6, 2010. We use a time series of SDO/AIA 304, 171, 131, 193, 335, 94 Å images, SDO/HMI magnetograms, plus ROSA and ISOON Hαimages, to study the erupting active region. We identify coronal loop arcades associated with a quadrupolar magnetic configuration, and show that the expansion and cancelation of the central loop arcade system over the filament is followed by the eruption of the filament. The erupting filament reveals a clear helical twist and develops…
We report on observations of the two newly-identified reconnection geometries involving erupting flux ropes. In 3D, a flux rope can reconnect either with a surrounding coronal arcade (recently named "ar-rf" reconnection) or with itself ("rr-rf" reconnection), and both kinds of reconnection create a new flux rope field line and a flare loop. For the first time, we identify all four constituents of both reconnections in a solar eruptive event, the filament eruption of 2011 June 07 observed by SDO/AIA. The ar-rf reconnection manifests itself as shift of one leg of the filament by more than 25" no…
We study the evolution of a mini-filament eruption in a quiet region at the center of the solar disk and its impact on the ambient atmosphere. We used high-spectral resolution imaging spectroscopy in H$α$ acquired by the echelle spectrograph of the Vacuum Tower Telescope (VTT), Tenerife, Spain, photospheric magnetic field observations from the Helioseismic and Magnetic Imager (HMI), and UV/EUV imaging from the Atmospheric Imaging Assembly (AIA) of the Solar Dynamics Observatory (SDO). The H$α$ line profiles were noise-stripped using Principal Component Analysis (PCA) and then inverted to produ…
We demonstrate that major asymmetries in erupting filaments and CMEs, namely major twists and non-radial motions are typically related to the larger-scale ambient environment around eruptive events. Our analysis of prominence eruptions observed by the STEREO, SDO and SOHO spacecraft shows that prominence spines retain, during the initial phases, the thin ribbon-like topology they had prior to the eruption. This topology allows bending, rolling, and twisting during the early phase of the eruption, but not before. The combined ascent and initial bending of the filament ribbon is non-radial in th…
Employing Solar Dynamic Observatory/Atmosphertic Imaging Assembly (AIA) multi-wavelength images, we study an eruption of two crossing filaments, and firstly report the current sheets (CSs) connecting the lower flare ribbons and the upper erupting filaments. On July 8, 2014, two crossing filaments are observed in the NOAA active region (AR) 12113. The lower-lying filament rises first, and then meets the higher-lying one. Thereafter, both of them erupt together. The filament eruption draws the overlying magnetic field lines upward, leading to the approach of two legs, with opposite magnetic pola…
We analyze the imaging observations of an M-class eruptive flare of 2015 November, 4. The pre-eruptive H alpha filament was modelled by the non-linear force free field model, which showed that it consisted of two helical systems. Tether-cutting reconnection involving these two systems led to the formation of a hot sigmoidal loop structure rooted in a small hook that formed at the end of the flare ribbon. Subsequently, the hot loops started to slip away form the small hook until it disappeared. The loops continued slipping and the ribbon elongated itself by several tens of arc seconds. A new an…
We present a detailed three-dimensional (3D) view of a prominence eruption, coronal loop expansion, and coronal mass ejections (CMEs) associated with an M4.4 flare that occurred on 2011 March 8 in the active region NOAA 11165. Full-disk H$α$ images of the flare and filament ejection were successfully obtained by the Flare Monitoring Telescope (FMT) following its relocation to Ica University, Peru. Multiwavelength observation around the H$α$ line enabled us to derive the 3D velocity field of the H$α$ prominence eruption. Features in extreme ultraviolet were also obtained by the Atmospheric Imag…
Magnetic flux ropes (MFRs), sets of coherently twisted magnetic field lines, are believed as core structures of various solar eruptions. Their evolution plays an important role to understand the physical mechanisms of solar eruptions, and can shed light on adverse space weather near the Earth. However, the erupting MFRs are occasionally prevented by strong overlying magnetic fields, and the MFR evolution during the descending phase in the confined cases is lack of attention. Here, we present the deformation of an erupting MFR accompanied by a confined double-peaked solar flare. The first peak …
We present a new method for determining the column density of erupting filament material using state-of-the-art multi-wavelength imaging data. Much of the prior work on filament/prominence structure can be divided between studies that use a polychromatic approach with targeted campaign observations, and those that use synoptic observations, frequently in only one or two wavelengths. The superior time resolution, sensitivity and near-synchronicity of data from the Solar Dynamics Observatory's Advanced Imaging Assembly allow us to combine these two techniques using photo-ionisation continuum opa…
We report on an eruption involving a relatively rare filament-filament interaction on 2013 June 21, observed by SDO and STEREO-B. The two filaments were separated in height with a 'double-decker' configuration. The eruption of the lower filament began simultaneously with a descent of the upper filament resulting in a convergence and direct interaction of the two filaments. The interaction was accompanied by the heating of surrounding plasma and an apparent crossing of a loop-like structure through the upper filament. The subsequent coalescence of the filaments drove a bright front ahead of the…
We report an observation of a partially erupting prominence and associated dynamical plasma processes based on observations recorded by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). The prominence first goes through a slow rise (SR) phase followed by a fast rise (FR). The slow rise phase started after a couple of small brightenings seen toward the footpoints. At the turning point from SR to FR, the prominence had already become kinked. The prominence shows strong brightening at the central kink location during the start of FR. We interpret this as intern…
How filaments form and erupt are topics about which solar researchers have wondered since more than a century and that are still open to debate. We present observations of a filament formation, its failed eruption, and the associated flare (SOL2019-05-09T05:51) that occurred in active region (AR) 12740 using data from SDO, STEREO-A, IRIS, and NSO/GONG. AR 12740 was a decaying region formed by a very disperse following polarity and a strong leading spot, surrounded by a highly dynamic zone where moving magnetic features (MMFs) were seen constantly diverging from the spot. Our analysis indicates…
Can We Distinguish the Source Region Location of Filament/Prominence Eruptions from the Sun-as-a-star H$α$ Spectrum?
National Astronomical Observatories, Chinese Academy of Science（中国科学院国家天文台）；School of Astronomy and Space Science, University of Chinese Academy of Sciences（中国科学院大学天文与空间科学学院）；Key Laboratory of Dark Matter and Space Astronomy, Purple Mountain Observatory, Chinese Academy of Sciences（中国科学院紫金山天文台暗物质与空间天文重点实验室）；School of Astronomy and Space Science, University of Science and Technology of China（中国科学技术大学天文与空间科学学院）；National Space Science Center, Chinese Academy of Sciences（中国科学院国家空间科学中心）
Observations of the full lifetime of CBPs in data taken with the AIA on board SDO in four passbands, He II 304 A, Fe IX/X 171 A, Fe XII 193 A, and Fe XVIII 94 A are investigated for the occurrence of plasma ejections, micro-flaring, mini-filament eruptions and mini coronal mass ejections (mini-CMEs). First and foremost, our study shows that the majority (76%) of quiet Sun CBPs (31 out of 42 CBPs) produce at least one eruption during their lifetime. From 21 eruptions in 11 CBPs, 18 occur in average ~17 hrs after the CBP formation for an average lifetime of the CBPs in AIA 193 A of ~21 hrs. This…
Solar X-ray jets are evidently made by a burst of reconnection of closed magnetic field in a jet's base with ambient "open" field (1,2). In the widely-accepted version of the "emerging-flux" model, that reconnection occurs at a current sheet between the open field and emerging closed field and also makes a compact hot brightening that is usually observed at the edge of the jet's base (1,3). Here we report on high-resolution X-ray and EUV observations of 20 randomly-selected X-ray jets in polar coronal holes. In each jet, contrary to the emerging-flux model, a miniature version of the filament …
We report a study of a compound solar eruption that was associated with two consecutively erupting magnetic structures and correspondingly two distinct peaks, during impulsive phase, of an M-class flare (M8.5). Simultaneous multi-viewpoint observations from $\textit{SDO}$, $\textit{GOES}$ and $\textit{STEREO-A}$ show that this compound eruption originated from two pre-existing sigmoidal magnetic structures lying along the same polarity inversion line. Observations of the associated pre-existing filaments further show that these magnetic structures are lying one on top of the other, separated b…
We report microwave spectral imaging observations of an erupting magnetic flux rope during the early impulsive phase of the X8.2-class limb flare on 2017 September 10, obtained by the Expanded Owens Valley Solar Array. A few days prior to the eruption, when viewed against the disk, the flux rope appeared as a reverse S-shaped dark filament along the magnetic polarity inversion line. During the eruption, the rope exhibited a "hot channel" structure in extreme ultraviolet and soft X-ray passbands sensitive to ~10 MK plasma. The central portion of the flux rope was nearly aligned with the line of…
We present the dynamics of two filaments and a C-class flare observed in NOAA 11589 on 2012 October 16. We used the multi-wavelength high-resolution data from SDO, as well as THEMIS and ARIES ground-based observations. The observations show that the filaments are progressively converging towards each other without merging. We find that the filaments have opposite chirality which may have prevented them from merging. On October 16, a C3.3 class flare occurred without the eruption of the filaments. According to the standard solar flare model, after the reconnection, post-flare loops form {\it be…
We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by SDO/AIA (end-on view) and displays a quasi vertical-thread structure. Bright U-shape/horn-like structure is observed surrounding the upper portion of the prominence at 171 angstrom before the eruption and becomes more prominent during the eruption. The disk view of STEREO-B shows that this long prominence is composed of a series of vertical threads and displays a half loop-like structure during the eruption. We focus on the magnetic support of the promin…
Failed filament eruptions are solar eruptions that are not associated with coronal mass ejections. In a failed filament eruption, the filament materials usually show some ascending and falling motions as well as generate bright EUV emissions. Here we report a failed filament eruption that occurred in a quiet-Sun region observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory. In this event, the filament spreads out but gets confined by the surrounding magnetic field. When interacting with the ambient magnetic field, the filament material brightens up and flows along…
A new instrument with a dual-beam H-alpha Doppler system is being developed at the Udaipur Solar Observatory (USO) in order to improve the quality and quantity of data on quiet, activated and erupting filaments and prominences on the Sun, especially those associated with geo-effective coronal mass ejections. These data can be potentially used to construct three-dimensional topology of erupting filaments as they leave the surface of the Sun and can be compared with multi-wavelength data obtained from space missions such as STEREO, SOHO, and Hinode. The characterization of various optical compon…
A magnetic flux rope structure is believed to exist in most coronal mass ejections (CMEs). However, it has been long debated whether the flux rope exists before eruption or is formed during eruption via magnetic reconnection. The controversy has been continuing because of our lack of routine measurements of the magnetic field in the pre-eruption structure, such as solar filaments. However, recently an indirect method was proposed to infer the magnetic field configuration based on the sign of helicity and the bearing direction of the filament barbs. In this paper, we apply this method to two er…
We present observations and modeling of the magnetic field configuration, morphology, and dynamics of a large-scale, high-latitude filament eruption observed by the Solar Dynamics Observatory. We analyze the 2015 July 9-10 filament eruption and the evolution of the resulting coronal mass ejection (CME) through the solar corona. The slow streamer-blowout CME leaves behind an elongated post-eruption arcade above the extended polarity inversion line that is only poorly visible in extreme ultraviolet (EUV) disk observations and does not resemble a typical bright flare-loop system. Magnetohydrodyna…
Using the observations from the Optical and Near-infrared Solar Eruption Tracer and the Solar Dynamics Observatory, we study an M5.7 flare in AR 11476 on 2012 May 10 and a micro-flare in the quiet Sun on 2017 March 23. Before the onset of each flare, there is a reverse S-shaped filament above the polarity inversion line. Then the filaments become unstable and begin to rise. The rising filaments gain the upper hand over the tension force of the dome-like overlying loops and thus successfully erupt outward. The footpoints of the reconnecting overlying loops successively brighten and are observed…
We observed an H$α$ surge occurred in the active region NOAA 12401 on 2015 August 17, and discuss its trigger mechanism, kinematic and thermal properties. It is suggested that this surge is caused by a chromospheric reconnection which ejects cool and dense material with the transverse velocity about 21-28 km s$^{-1}$ and the initial doppler velocity of 12 km s$^{-1}$. This surge is similar to the injection of newly formed filament materials from their footpoints, except that the surge here occurred in a relatively weak magnetic environment of ~100 G. Thus we discuss the possibility of filament…
