On-chip optical resonators have proven to be a promising platform for generating Kerr frequency combs. Whispering gallery mode resonators are particularly attractive because of their small footprint as well as low threshold and power consumption. This performance can be attributed to two characteristics: the cavity quality factor (Q) and the cavity dispersion. The input optical field into the cavity is amplified by the cavity Q, enabling nonlinear processes to occur with low input powers. In addition, the total span of the optical comb is governed by the dispersion. In an optical cavity-based comb, the dispersion is governed by the geometric dispersion of the cavity and the material dispersion. While many different materials have been explored, the realization of ultra-high Q (UHQ) on-chip frequency combs sources is still challenging for most materials. One exception is the family of integrated silica devices. However, because the silica attracts water molecules from the ambient environment, the lifetime of the device performance is fundamentally limited, unless packaged in a controlled atmosphere. Here, we demonstrate the generation of environmentally-stable frequency combs fabricated from SiO1.7N0.13 microtoroidal resonators. Due to the UHQ factors of the cavities, parametric oscillations with sub-microwatt thresholds are demonstrated. Based on their geometry and material properties, the cavities have normal dispersion. However, due to avoided mode crossing, frequency combs are generated. Finally, unlike SiO2, the SiO1.7N0.13 inhibits the formation of a water monolayer, allowing sub-microwatt performance to be maintained for over a week in devices stored with minimal environmental controls.
We present a novel approach to realize microresonator-comb-based high resolution spectroscopy that combines a fiber-laser cavity with a microresonator. Although the spectral resolution of a chip-based comb source is typically limited by the free spectral range (FSR) of the microresonator, we overcome this limit by tuning the 200-GHz repetition-rate comb over one FSR via control of an integrated heater. Our dual-cavity scheme allows for self-starting comb generation without the need for conventional pump-cavity detuning while achieving a spectral resolution equal to the comb linewidth. We measu…
Nonlinear optical effects including stimulated Brillouin scattering (SBS) and four-wave mixing (FWM) play an important role in microwave photonics, optical frequency combs, and quantum photonics. Harnessing SBS and FWM in a low-loss and versatile integrated platform would open the path to building large-scale Brillouin/Kerr-based photonic integrated circuits. In this letter, we investigate the Brillouin and Kerr properties of a low-index (n=1.513 @ 1550 nm) silicon oxynitride (SiON) platform. We observed, for the first time, backward SBS in SiON waveguides with a Brillouin gain coefficient of …
Dissipative Kerr-microresonator soliton combs (hereafter called soliton combs) are promising to realize chip scale integration of full soliton comb systems providing high precision, broad spectral coverage and a coherent link to the micro/mm/THz domain with diverse applications coming on line all the time. However, the large soliton comb spacing hampers some applications. For example, for spectroscopic applications, there are simply not enough comb lines available to sufficiently cover almost any relevant absorption features. Here, we overcome this limitation by scanning the comb mode spacing …
Microresonator frequency combs, or microcombs, have gained wide appeal for their rich nonlinear physics and wide range of applications. Stoichiometric silicon nitride films grown via low-pressure chemical vapor deposition (LPCVD), in particular, are widely used in chip-integrated Kerr microcombs. Critical to such devices is the ability to control the microresonator dispersion, which has contributions from both material refractive index dispersion and geometric confinement. Here, we show that modifications to the LPCVD growth conditions, specifically the ratio of the gaseous precursors, has a s…
We report the thermal control of a dissipative Kerr microresonator soliton comb via an optical sideband generated from an electro-optic modulator. Same as the previous reports using an independent auxiliary laser, our sideband-based (S-B) auxiliary light also enables to access a stable soliton comb and to reduce the phase noise of the soliton comb, greatly simplifying the setup with an auxiliary laser. More importantly, because of the intrinsically high frequency/phase correlation between the pump and S-B auxiliary light, the detuning between the pump and resonance frequency is automatically a…
Rapid and large scanning of a dissipative Kerr-microresonator soliton comb with the characterization of all comb modes along with the separation of the comb modes is imperative for the emerging applications of the frequency-scanned soliton combs. However, the scan speed is limited by the gain of feedback systems and the measurement of the frequency shift of all comb modes has not been demonstrated. To overcome the limitation of the feedback, we incorporate the feedback with the feedforward. With the additional gain of > 40 dB by a feedforward signal, a dissipative Kerr-microresonator soliton c…
Microresonator-based optical frequency combs emitted from high-quality-factor microresonators, also known as microcombs, have opened up new horizons to areas of optical frequency comb technology including frequency metrology, precision sensing, and optical communication. To extend the capability of microcombs for such applications, large and reliable tunability is of critical importance. Here, we show broad spectral tuning of Kerr soliton microcombs in a thermally controlled crystalline microresonator with pump-detuning stabilization. The fundamental elements composing frequency combs, namely …
We investigate the effects of Raman and Kerr gain in crystalline microresonators and determine the conditions required to generate modelocked frequency combs. We show theoretically that strong, narrowband Raman gain determines a maximum microresonator size allowable to achieve comb formation. We verify this condition experimentally in diamond and silicon microresonators and show that there exists a competition between Raman and Kerr effects that leads to the existence of two different comb states.
Fast-responding detector arrays are commonly used for imaging rapidly-changing scenes. Besides array detectors, a single-pixel detector combined with a broadband optical spectrum can also be used for rapid imaging by mapping the spectrum into a spatial coordinate grid and then rapidly measuring the spectrum. Here, optical frequency combs generated from high-$Q$ silica microresonators are used to implement this method. The microcomb is dispersed in two spatial dimensions to measure a test target. The target-encoded spectrum is then measured by multi-heterodyne beating with another microcomb hav…
With demonstrated applications ranging from metrology to telecommunications, soliton microresonator frequency combs have emerged over the past decade as a remarkable new technology. However, standard implementations only allow for the generation of combs whose repetition rate is tied close to the fundamental resonator free-spectral range (FSR), offering little or no dynamic control over the comb line spacing. Here we propose and experimentally demonstrate harmonic and rational harmonic driving as novel techniques that allow for the robust generation of soliton frequency combs with discretely a…
THz oscillators generated via frequency-multiplication of microwaves are facing difficulty in achieving low phase noise. Photonics-based techniques, in which optical two tones are translated to a THz wave through opto-electronic conversion, are promising if the relative phase noise between the two tones is well suppressed. Here, a THz ($\approx$ 560 GHz) wave with a low phase noise is provided by a frequency-stabilized, dissipative Kerr microresonator soliton comb. The repetition frequency of the comb is stabilized to a long fiber in a two-wavelength delayed self-heterodyne interferometer, sig…
We observe a transition to a coherent-comb state in a SiN-microresonator with anomalous dispersion. Although ~300 fs pulse trains are generated after line-by-line shaping, the intensity within the microring does not appear to be pulse-like.
Mid-infrared (mid-IR) frequency combs have broad applications in molecular spectroscopy and chemical/biological sensing. Recently developed microresonator-based combs in this wavelength regime could enable portable and robust devices using a single-frequency pump field. Here, we report the first demonstration of a modelocked microresonator-based frequency comb in the mid-IR spanning 2.4 μm to 4.3 μm. We observe high pump-to-comb conversion efficiency, in which 40% of the pump power is converted to the output comb power. Utilizing an integrated PIN structure allows for tuning the silicon micror…
We report the first demonstration of thermally controlled soliton modelocked frequency comb generation in microresonators. By controlling the electric current through heaters integrated with silicon nitride microresonators, we demonstrate a systematic and repeatable pathway to single- and multi-soliton modelocked states without adjusting the pump laser wavelength. Such an approach could greatly simplify the generation of modelocked frequency combs and facilitate applications such as chip-based dual-comb spectroscopy.
We demonstrate that flat-topped dissipative solitonic pulses, platicons, and corresponding frequency combs can be excited in optical microresonators with normal group velocity dispersion using either amplitude modulation of the pump or bichromatic pump. Soft excitation may occur in particular frequency range if modulation depth is large enough and modulation frequency is close to the free spectral range of the microresonator.
Microresonator frequency combs (microcombs) are enabling new applications in frequency synthesis and metrology from high-speed laser ranging to coherent optical communications. One critical parameter that dictates the performance of the microcomb is the optical quality factor (Q) of the microresonator. Microresonators fabricated in planar structures such as silicon nitride (Si3N4) allow for dispersion engineering and the possibility to monolithically integrate the microcomb with other photonic devices. However, the relatively large refractive index contrast and the tight optical confinement re…
We analyze the consequences of dissipative heating in driven Kerr microresonators theoretically and numerically, using a thermal Lugiato-Lefever model. We show that thermal sensitivity modifies the stability range of continuous wave in a way that blocks direct access to broadband frequency-comb forming waveforms, and we propose a deterministic access path that bypasses the thermal instability barrier. We describe a novel thermal instability that leads to thermooptical oscillations via a Hopf bifurcation.
We theoretically and experimentally investigate the chaotic regime of optical frequency combs generated in nonlinear ring microresonators pumped with continuous wave light. We show that the chaotic regime reveals itself, in an apparently counter-intuitive way, by a flat top symmetric envelope of the frequency spectrum, when observed by means of an optical spectrum analyzer. The comb demodulated on a fast photodiode produces a noisy radio frequency signal with an spectral width significantly exceeding the linear bandwidth of the microresonator mode.
Kerr frequency combs generated from microresonators are the subject of intense study. Most research employs microresonators with anomalous dispersion, for which modulation instability is believed to play a key role in initiation of the comb. Comb generation in normal dispersion microresonators has also been reported but is less well understood. Here we report a detailed investigation of few-moded, normal dispersion silicon nitride microresonators, showing that mode coupling can strongly modify the local dispersion, even changing its sign. We demonstrate a link between mode coupling and initiat…
A shaped doublet pump pulse is proposed for simultaneous octave-spanning soliton Kerr frequency comb generation and second-harmonic conversion in a single microresonator. The temporal soliton in the cavity is trapped atop a doublet pulse pedestal, resulting in a greatly expanded soliton region compared to that with a general Gaussian pulse pump. The possibility of single-microresonator comb self-referencing in a single silicon nitride microring, which can facilitate compact on-chip optical clocks, is demonstrated via simulation.
We perform the first theoretical modeling of the spectral-temporal dynamics of parametric microresonator comb generation with octave-spanning bandwidths through use of the Lugiato-Lefever model extended to include higher-order dispersion and self-steepening. We show that three distinct stages are necessary to achieve single-pulse modelocking and ultrabroadband, stabilized combs. Our simulations agree well with previous experimental demonstrations and predict many of the observed features, including multi-pulse generation, dispersive wave generation, modelocking and comb stabilization.
We propose a new type of broadband and low repetition rate frequency comb generator which has the shape of an elongated and nanoscale-shallow optical bottle microresonator created at the surface of an optical fiber. The free spectral range (FSR) of the broadband azimuthal eigenfrequency series of this resonator is the exact multiple of the FSR of the dense and narrowband axial series. The effective radius variation of the microresonator is close to a parabola with a nanoscale height which is greater or equal to lambda/2pi*n0 (here lambda is the characteristic radiation wavelength and n0 is the…
We demonstrate control and stabilization of an optical frequency comb generated by four-wave mixing in a monolithic microresonator with a mode spacing in the microwave regime (86 GHz). The comb parameters (mode spacing and offset frequency) are controlled via the power and the frequency of the pump laser, which constitutes one of the comb modes. Furthermore, generation of a microwave beat note at the comb's mode spacing frequency is presented, enabling direct stabilization to a microwave frequency standard.
A high-Q silica whispering-gallery mode microresonator is an attractive platform on which to demonstrate a broad and phase-locked Raman comb in various wavelength regimes. Raman combs can be used for applications such as compact pulse laser sources, sensors, optical clocks, and coherence tomography. However, the formation dynamics of a Raman comb has not been well exploited. Here we study the dynamics of the Raman comb formation in silica rod microresonators, which have cavity free spectral ranges in microwave rates. We generated a Raman comb with a smooth spectral envelope and also observed t…
Recent developments demonstrate that parametric four-wave mixing (FWM) in high-Q microresonators is a highly promising and effective approach for optical frequency comb generation, with applications including spectroscopy, optical clocks, arbitrary waveform generation, frequency metrology, and astronomical spectrograph calibration. Each of these microresonator platforms utilizes a scheme in which the system is pumped by a single-frequency laser at a cavity resonance. This scheme requires tuning of the pump wavelength into resonance and the generated comb is susceptible to fluctuations in pump …
Optical frequency combs are key to optical precision measurements. While most frequency combs operate in the near-infrared regime, many applications require combs at mid-infrared, visible or even ultra-violet wavelengths. Frequency combs can be transferred to other wavelengths via nonlinear optical processes, however, this becomes exceedingly challenging for high-repetition rate frequency combs. Here, it is demonstrated that a synchronously driven high-Q microresonator with a second-order optical nonlinearity can efficiently convert high-repetition rate near-infrared frequency combs to visible…
Experimental and theoretical studies of nonlinear frequency combs in χ^(3) optical microresonators attracted tremendous research interest during the last decade and resulted in prototypes of solitonbased steadily working devices. Realization of similar combs owing to χ^(2) optical nonlinearity promises new breakthroughs and is a big scientific challenge. We analyze the main obstacles for realization of the χ^(2) frequency combs in high-Q microresonators and propose two families of steadystate nonlinear solutions, including soliton and periodic solutions, for such combs. Despite generic periodi…
Microresonator based optical frequency combs (MFC) have demonstrated promise in extending the capabilities of optical frequency combs. Here we demonstrate all optical stabilization of a low noise temporal soliton based MFC in a crystalline resonator via a new technique to control the repetition rate. This is accomplished by thermally heating the microresonator with an additional probe laser coupled to an auxiliary optical resonator mode. The offset frequency is controlled by stabilization of the pump laser frequency to a reference optical frequency comb. We analyze the stabilization by perform…
Octave-wide frequency combs in microresonators are essential for self-referencing. However, it is difficult for the small-size and high-repetition-rate microresonators to achieve perfect soliton modelocking over the broad frequency range due to the detrimental impact of dispersion. Here we examine the stability of the soliton states consisting of one hundred modes in silicon-nitride microresonators with the one-THz free spectral range. We report the coexistence of fast and slow solitons in a narrow detuning range, which is surrounded on either side by the breather states. We decompose the brea…
Frequency combs and coherent dissipative structures in nonlinear optical microresonators
Deutsches Elektronen-Synchrotron DESY（德国电子同步加速器）；Universität Hamburg（汉堡大学）；Laboratoire Temps-Fréquence, Université de Neuchâtel（纳沙泰尔大学时间频率实验室）；Swiss Federal Institute of Technology (EPFL)（瑞士联邦理工学院（洛桑联邦理工学院））
We demonstrate the first low-noise mid-IR frequency comb source using a silicon microresonator. Our observation of strong Raman scattering lines in the generated comb suggests that Raman and four-wave mixing interactions play a role in assisting the transition to the low-noise state. In addition, we characterize, the intracavity comb generation dynamics using an integrated PIN diode, which takes advantage of the inherent three-photon absorption process in silicon.
Recent experiments have demonstrated the generation of widely-spaced parametric sidebands that can evolve into "clustered" optical frequency combs in Kerr microresonators. Here we describe the physics that underpins the formation of such clustered comb states. In particular, we show that the phase-matching required for the initial sideband generation is such that (at least) one of the sidebands experiences anomalous dispersion, enabling that sideband to drive frequency comb formation via degenerate and non-degenerate four-wave mixing. We validate our proposal through a combination of experimen…
Mode interaction in silicon nitride micro-resonators is investigated. We provide clear experimental evidence of mode interaction between two family modes and mode interaction is demonstrated to be the cause of the comb generation in resonators with normal dispersion.
We stabilize a chip-scale Si3N4 phase-locked Kerr frequency comb via locking the pump laser to an independent stable high-Q reference microresonator and locking the comb spacing to an external microwave oscillator. In this comb, the pump laser shift induces negligible impact on the comb spacing change. This scheme is a step towards miniaturization of the stabilized Kerr comb system as the microresonator reference can potentially be integrated on-chip. Fractional instability of the optical harmonics of the stabilized comb is limited by the microwave oscillator used for comb spacing lock below 1…
Microresonator-based optical frequency combs have been a topic of extensive research during the last few years. Several theoretical models for the comb generation have been proposed; however, they do not comprehensively address experimental results that show a variety of independent comb generation mechanisms. Here, we present frequency-domain experiments that illuminate the transition of microcombs into phase-locked states, which show characteristics of injection locking between ensembles of comb modes. In addition, we demonstrate the existence of equidistant optical frequency combs that are …
Dissipative Kerr soliton microcombs in microresonators has enabled fundamental advances in chip scale precision metrology, communication, spectroscopy, and parallel signal processing. Here we demonstrate polarization diverse soliton transitions and deterministic switching dynamics of a self stabilized microcomb in a strongly coupled dispersion-managed microresonator driven with a single pump laser. The switching dynamics are induced by the differential thermorefractivity between coupled transverse magnetic and transverse electric supermodes during the forward backward pump detunings. The achie…
Globally, the long-haul transmission of ultra-high bandwidth data is enabled through coherent communications. Driven by the rapid pace of growth in interconnectivity over the last decade, long-haul data transmission has reached capacities on the order of tens to hundreds of terabits per second, over fiber reaches which may span thousands of kilometers. Data center communications however operate in a different regime, featuring shorter reaches and characterized as being more cost and power sensitive. While integrated microresonator frequency combs are poised to revolutionize light sources used …
Microresonator frequency combs based on the $χ^{(3)}$ nonlinearity are nowadays well understood and making their way into different applications. Recently, microresonator frequency combs based on the $χ^{(2)}$ nonlinearity are receiving increasing attention, as they promise certain benefits, but still require further study. Here, we demonstrate the generation of a $χ^{(2)}$ frequency comb, initiated via optical parametric oscillation (OPO) in a lithium niobate mm-sized microresonator. By pumping at 532 nm with 30 $μ$W of power, we observe 1-THz-wide comb spectra around 1064 nm with degenerate …
Microresonator-based frequency combs are strong contenders as light sources for wavelength-division multiplexing (WDM). Recent demonstrations have shown the potential of microresonator combs for replacing tens of WDM lasers with a single laser-pumped device. These experiments relied on microresonators displaying anomalous dispersion. Devices operating in the normal dispersion offer the prospect of attaining high power conversion efficiency - an aspect that will be crucial in the future for enabling energy-efficient coherent communications with higher order modulation formats or lighting severa…
Experiments and theoretical modeling yielded significant progress towards understanding of Kerr-effect induced optical frequency comb generation in microresonators. However, the simultaneous interaction of hundreds or thousands of optical comb frequencies with the same number of resonator modes leads to complicated nonlinear dynamics that are far from fully understood. An important prerequisite for modeling the comb formation process is the knowledge of phase and amplitude of the comb modes as well as the detuning from their respective microresonator modes. Here, we present comprehensive measu…
We report on the fabrication of high-Q, fused-quartz microresonators and the parametric generation of a frequency comb with 36 GHz line spacing using them. We have characterized the intrinsic stability of the comb in both the time and frequency domains to assess its suitability for future precision metrology applications. Intensity autocorrelation measurements and line-by-line comb control reveal near-transform-limited picosecond pulse trains that are associated with good relative phase and amplitude stability of the comb lines. The comb's 36 GHz line spacing can be readily photodetected, whic…
We introduce the generalized Lugiato-Lefever equation describing nonlinear effects in the bottle microresonators. We demonstrate that the nonlinear modes of these resonators can form multiple coexisting and overlapping nonlinear resonances and that their instabilities lead to the generation of the low repetition rate frequency combs.
We have investigated parametric seeding of a microresonator frequency comb (microcomb) by way of a pump laser with two electro-optic-modulation sidebands. We show that the pump-sideband spacing is precisely replicated throughout the microcomb's optical spectrum, and we demonstrate a record absolute line-spacing stability for microcombs of $1.6\times10^{-13}$ at 1 s. The spectrum of a parametric comb is complex, and often non-equidistant subcombs are observed. Our results demonstrate that parametric seeding can not only control the subcombs, but can lead to the generation of a strictly equidist…
The phenomenon of synchronization occurs universally across the natural sciences and provides critical insight into the behavior of coupled nonlinear dynamical systems. It also offers a powerful approach to robust frequency or temporal locking in diverse applications including communications, superconductors, and photonics. Here we report the experimental synchronization of two coupled soliton modelocked chip-based frequency combs separated over distances of 20 m. We show that such a system obeys the universal Kuramoto model for synchronization and that the cavity solitons from the microresona…
We numerically investigate the influence of high-order dispersion on both temporal and spectral characterizations of microresonator-based optical frequency combs. The moment method is utilized to study the temporal dynamics of intracavity solitons. The theoretical and numerical results indicate the temporal shifts are induced by high-odd-order dispersion rather than high-even-order dispersion. The role of high-order dispersion on the frequency comb envelopes is carefully elucidated through analyzing the intracavity Cherenkov radiations. We further demonstrate that the spectra envelope of an ul…
Taking advantage of an extended Lugiato--Lefever equation with third-order dispersion, we numerically show that dark cavity solitons formed in normal dispersion of microresonators are capable of emitting dispersive waves in both normal and anomalous dispersion regions, resembling the behavior of the commonly encountered bright cavity solitons. The generated dispersive waves can be accurately predicted by the dissipative radiation theory. In addition, we demonstrate the stability enhancement of Kerr frequency combs in normal dispersion regime in case the dispersive wave is emitted by dark solit…
Broadband Kerr combs with a flat comb spectral profile are expected in a number of applications, such as high-capacity optical communication. Here, we propose novel concentric dual-ring microresonators (DRMs) for advanced dispersion engineering to tailor the comb spectral profile. The dispersion can be flexibly engineered not only by the cross-section of the DRMs, but also by the gap between concentric dual-ring microresonators, which provides a new path to geometrically control the spectral profile of the soliton Kerr combs. An octave-spanning dissipative Kerr soliton comb with superior spect…
The semicylindrical microresonator with relatively simple excitation with a plane wave is studied. The resonator is formed on the base of the dielectric/metal/dielectric structure, where the wave energy penetrates into resonator through a thin metal layer and stored in a semicylindrical dielectric with high permittivity. The proposed microresonator combines features of Fabry-Perot and Whispering gallery mode resonators. Dependence of radiation losses on the radius and materials are estimated by theoretical analysis, while excitation by a plane wave is shown via numerical analysis. The quality …
Dissipative Kerr solitons are localized structures that exist in optical microresonators. They lead to the formation of microcombs --- chip-scale frequency combs that could facilitate precision frequency synthesis and metrology by capitalizing on advances in silicon photonics. Previous demonstrations have mainly focused on anomalous dispersion microresonators. Notwithstanding, localized structures also exist in the normal dispersion regime in the form of circulating dark pulses, but their physical dynamics is far from being understood. Here, we report the discovery of reversible switching betw…
We demonstrate that the optical spectrum of a soliton microcomb generated in a microresonator can be coherently extended by using bichromatic pumping: one pump with a frequency in the anomalous dispersion regime of the microresonator is used to generate a bright soliton microcomb while a second pump in the normal dispersion regime both compensates the thermal effect of the microresonator and generates a second frequency comb via cross-phase modulation with the bright soliton, thus extending the spectrum of the microcomb. Experimental results for different microresonators show that the mode spa…
We predict the existence of a novel type of the flat-top dissipative solitonic pulses, "platicons", in microresonators with normal group velocity dispersion (GVD). We propose methods to generate these platicons from cw pump. Their duration may be altered significantly by tuning the pump frequency. The transformation of a discrete energy spectrum of dark solitons of the Lugiato-Lefever equation into a quasicontinuous spectrum of platicons is demonstrated. Generation of similar structures is also possible with bi-harmonic, phase/amplitude modulated pump or via laser injection locking.
Implementing optical-frequency combs with integrated photonics will enable wider use of precision timing signals.Here, we explore the generation of an octave-span, Kerr-microresonator frequency comb, using hybrid integration ofan InP distributed-feedback laser and a SiN photonic-integrated circuit. We demonstrate electrically pumped and fiber-packaged prototype systems, enabled by self-injection locking. This direct integration of a laser and a microresonatorcircuit without previously used intervening elements, like optical modulators and isolators, necessitates understand-ing self-injection-l…
Microresonator-based optical frequency combs, or "microcombs", have attracted lots of attention in the last few years thanks to their promising applications in telecommunications, spectroscopy and optical clocks. The process of comb generation in microresonators can be modelled in the frequency domain using coupled mode equations, and has also recently been successfully described in the time domain using a nonlinear Schrödinger equation known as the Lugiato-Lefever equation. Though time-domain approaches have brought many interesting insights for the understanding of microcombs, an intuitive f…
Manipulation of the dynamics of cavity solitons, precise control of frequency comb spectra and nonlinear response of microresonators through exploitation of the ultrafast optical properties of graphene can have an immense impact on the technological advancement of on-chip photonic devices. Here, we report that an efficient self-frequency blueshifted frequency comb at optical and near-infrared wavelengths can be achieved owing to the near-instantaneous free-carrier dynamics of graphene in a realistic graphene-covered silicon nitride microresonator. We perform a stability analysis to find the re…
