arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1906.05577physics.ins-detastro-ph.IM
收藏

研制大面积高温Si(Li)探测器的批量生产模型

Developing a mass-production model of large-area Si(Li) detectors with high operating temperatures

M. Kozai, H. Fuke, M. Yamada, K. Perez, T. Erjavec, C. J. Hailey, N. Madden, F. Rogers, N. Saffold, D. Seyler, Y. Shimizu, K. Tokuda, Y. Shimizu, K. Tokuda, M. Xiao

摘要:

这项研究提出了一种锂漂移硅(Si(Li))探测器的制造工艺,与以前的方法相比,该工艺允许以更高的产量进行大规模生产,同时在相对较高的温度下提供大的敏感区域和低漏电流。这种设计是为通用反粒子谱仪(GAPS)实验的独特要求而开发的,总直径为10 cm,有效面积约为9 cm,分为8个读出条,总厚度为2.5 mm,$\gtrsim$为2.2 mm($\gtrsim$ 90%)敏感厚度。对于20-100 keV的X射线,在工作温度~-40 ℃时,要求能量分辨率为$\lesssim$ 4 keV半高宽,这远远高于通常用于获得精细能量分辨率的液氮温度。GAPS由$\gtrsim$ 1000探测器组成,也需要高产量生产。我们专门开发的硅晶体和定制的锂蒸发、扩散和漂移方法可以实现厚、大面积和均匀的敏感层。我们发现,保留一个薄的未漂移层上的p侧的检测器大大降低了漏电流,这是在这些温度下的能量分辨率的主要组成部分。保护环结构和探测器表面的最佳蚀刻也被证实,以抑制漏电流。我们报告了目前正在进行的这些探测器的大规模生产,并证明它能够提供~ 90%的高产率。

英文摘要:

This study presents a fabrication process for lithium-drifted silicon (Si(Li)) detectors that, compared to previous methods, allows for mass production at a higher yield, while providing a large sensitive area and low leakage currents at relatively high temperatures. This design, developed for the unique requirements of the General Antiparticle Spectrometer (GAPS) experiment, has an overall diameter of 10 cm, with ~9 cm of active area segmented into 8 readout strips, and an overall thickness of 2.5 mm, with $\gtrsim$2.2 mm ($\gtrsim$90%) sensitive thickness. An energy resolution $\lesssim$4 keV full-width at half-maximum (FWHM) for 20-100 keV X-rays is required at the operating temperature ~-40C, which is far above the liquid nitrogen temperatures conventionally used to achieve fine energy resolution. High-yield production is also required for GAPS, which consists of $\gtrsim$1000 detectors. Our specially-developed Si crystal and custom methods of Li evaporation, diffusion and drifting allow for a thick, large-area and uniform sensitive layer. We find that retaining a thin undrifted layer on the p-side of the detector drastically reduces the leakage current, which is a dominant component of the energy resolution at these temperatures. A guard-ring structure and optimal etching of the detector surface are also confirmed to suppress the leakage current. We report on the mass production of these detectors that is ongoing now, and demonstrate it is capable of delivering a high yield of ~90%.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑