The maximization of generalized modularity performs well on networks in which the members of all communities are statistically indistinguishable from each other. However, there is no theory bounding the maximization performance in more realistic networks where edges are heterogeneously distributed within and between communities. Using the random graph properties, we establish asymptotic theoretical bounds on the resolution parameter for which the generalized modularity maximization performs well. From this new perspective on random graph model, we find the resolution limit of modularity maximization can be explained in a surprisingly simple and straightforward way. Given a network produced by the stochastic block models, the communities for which the resolution parameter is larger than their densities are likely to be spread among multiple clusters, while communities for which the resolution parameter is smaller than their background inter-community edge density will be merged into one large component. Therefore, no suitable resolution parameter exits when the intra-community edge density in a subgraph is lower than the inter-community edge density in some other subgraph. For such networks, we propose a progressive agglomerative heuristic algorithm to detect practically significant communities at multiple scales.
Modularity is widely used to effectively measure the strength of the disjoint community structure found by community detection algorithms. Although several overlapping extensions of modularity were proposed to measure the quality of overlapping community structure, there is lack of systematic comparison of different extensions. To fill this gap, we overview overlapping extensions of modularity to select the best. In addition, we extend the Modularity Density metric to enable its usage for overlapping communities. The experimental results on four real networks using overlapping extensions of mo…
Modularity is widely used to effectively measure the strength of the community structure found by community detection algorithms. However, modularity maximization suffers from two opposite yet coexisting problems: in some cases, it tends to favor small communities over large ones while in others, large communities over small ones. The latter tendency is known in the literature as the resolution limit problem. To address them, we propose to modify modularity by subtracting from it the fraction of edges connecting nodes of different communities and by including community density into modularity.…
Identifying community structure in networks is an issue of particular interest in network science. The modularity introduced by Newman and Girvan [Phys. Rev. E 69, 026113 (2004)] is the most popular quality function for community detection in networks. In this study, we identify a problem in the concept of modularity and suggest a solution to overcome this problem. Specifically, we obtain a new quality function for community detection. We refer to the function as Z-modularity because it measures the Z-score of a given division with respect to the fraction of the number of edges within communit…
In this paper, we first discuss the definition of modularity (Q) used as a metric for community quality and then we review the modularity maximization approaches which were used for community detection in the last decade. Then, we discuss two opposite yet coexisting problems of modularity optimization: in some cases, it tends to favor small communities over large ones while in others, large communities over small ones (so called the resolution limit problem). Next, we overview several community quality metrics proposed to solve the resolution limit problem and discuss Modularity Density (Qds) …
We show here that the problem of maximizing a family of quantitative functions, encompassing both the modularity (Q-measure) and modularity density (D-measure), for community detection can be uniformly understood as a combinatoric optimization involving the trace of a matrix called modularity Laplacian. Instead of using traditional spectral relaxation, we apply additional nonnegative constraint into this graph clustering problem and design efficient algorithms to optimize the new objective. With the explicit nonnegative constraint, our solutions are very close to the ideal community indicator …
Community detection is a significant and challenging task in network research. Nowadays, plenty of attention has been focused on local methods of community detection. Among them, community detection with a greedy algorithm typically starts from the identification of local essential nodes called central nodes of the network; communities expand later from these central nodes by optimizing a modularity function. In this paper, we propose a new central node indicator and a new modularity function. Our central node indicator, which we call local centrality indicator (LCI), is as efficient as the we…
Modularity is widely used to effectively measure the strength of the disjoint community structure found by community detection algorithms. Several overlapping extensions of modularity were proposed to measure the quality of overlapping community structure. However, all these extensions differ just in the way they define the belonging coefficient and belonging function. Yet, there is lack of systematic comparison of different extensions. To fill this gap, we overview overlapping extensions of modularity and generalize them with a uniform definition enabling application of different belonging co…
Modularity maximization using greedy algorithms continues to be a popular approach toward community detection in graphs, even after various better forming algorithms have been proposed. Apart from its clear mechanism and ease of implementation, this approach is persistently popular because, presumably, its risk of algorithmic failure is not well understood. This Rapid Communication provides insight into this issue by estimating the algorithmic performance limit of modularity maximization. This is achieved by counting the number of metastable states under a local update rule. Our results offer …
We demonstrate an exact equivalence between two widely used methods of community detection in networks, the method of modularity maximization in its generalized form which incorporates a resolution parameter controlling the size of the communities discovered, and the method of maximum likelihood applied to the special case of the stochastic block model known as the planted partition model, in which all communities in a network are assumed to have statistically similar properties. Among other things, this equivalence provides a mathematically principled derivation of the modularity function, cl…
Modularity maximization is the most popular technique for the detection of community structure in graphs. The resolution limit of the method is supposedly solvable with the introduction of modified versions of the measure, with tunable resolution parameters. We show that multiresolution modularity suffers from two opposite coexisting problems: the tendency to merge small subgraphs, which dominates when the resolution is low; the tendency to split large subgraphs, which dominates when the resolution is high. In benchmark networks with heterogeneous distributions of cluster sizes, the simultaneo…
Modularity maximization has been one of the most widely used approaches in the last decade for discovering community structure in networks of practical interest in biology, computing, social science, statistical mechanics, and more. Modularity is a quality function that measures the difference between the number of edges found within clusters minus the number of edges one would statistically expect to find based on random chance. We present a natural generalization of modularity based on the difference between the actual and expected number of walks within clusters, which we call walk-modulari…
Community structure is an important property that captures inhomogeneities common in large networks, and modularity is one of the most widely used metrics for such community structure. In this paper, we introduce a principled methodology, the Spectral Graph Forge, for generating random graphs that preserves community structure from a real network of interest, in terms of modularity. Our approach leverages the fact that the spectral structure of matrix representations of a graph encodes global information about community structure. The Spectral Graph Forge uses a low-rank approximation of the m…
Some temporal networks, most notably citation networks, are naturally represented as directed acyclic graphs (DAGs). To detect communities in DAGs, we propose a modularity for DAGs by defining an appropriate null model (i.e., randomized network) respecting the order of nodes. We implement a spectral method to approximately maximize the proposed modularity measure and test the method on citation networks and other DAGs. We find that the attained values of the modularity for DAGs are similar for partitions that we obtain by maximizing the proposed modularity (designed for DAGs), the modularity f…
Community Search, or finding a connected subgraph (known as a community) containing the given query nodes in a social network, is a fundamental problem. Most of the existing community search models only focus on the internal cohesiveness of a community. However, a high-quality community often has high modularity, which means dense connections inside communities and sparse connections to the nodes outside the community. In this paper, we conduct a pioneer study on searching a community with high modularity. We point out that while modularity has been popularly used in community detection (witho…
Heterogeneous networks are networks consisting of different types of nodes and multiple types of edges linking such nodes. While community detection has been extensively developed as a useful technique for analyzing networks that contain only one type of nodes, very few community detection techniques have been developed for heterogeneous networks. In this paper, we propose a modularity based community detection framework for heterogeneous networks. Unlike existing methods, the proposed approach has the flexibility to treat the number of communities as an unknown quantity. We describe a Louvain…
Community structures detection is one of the fundamental problems in complex network analysis towards understanding the topology structures of the network and the functions of it. Nonnegative matrix factorization (NMF) is a widely used method for community detection, and modularity Q and modularity density D are criteria to evaluate the quality of community structures. In this paper, we establish the connections between Q, D and NMF for the first time. Q maximization can be approximately reformulated under the framework of NMF with Frobenius norm, especially when $n$ is large, and D maximizati…
Modularity, since its introduction, has remained one of the most widely used metrics to assess the quality of community structure in a complex network. However the resolution limit problem associated with modularity limits its applicability to networks with community sizes smaller than a certain scale. In the past various attempts have been made to solve this problem. More recently a new metric, modularity density, was introduced for the quality of community structure in networks in order to solve some of the known problems with modularity, particularly the resolution limit problem. Modularity…
Community-aware centrality is an emerging research area in network science concerned with the importance of nodes in relation to community structure. Measures are a function of a network's structure and a given partition. Previous approaches extend classical centrality measures to account for community structure with little connection to community detection theory. In contrast, we propose cluster-quality vitality measures, i.e., modularity vitality, a community-aware measure which is well-grounded in both centrality and community detection theory. Modularity vitality quantifies positive and ne…
We introduce a new algorithm for modularity-based community detection in large networks. The algorithm, which we refer to as a smart local moving algorithm, takes advantage of a well-known local moving heuristic that is also used by other algorithms. Compared with these other algorithms, our proposed algorithm uses the local moving heuristic in a more sophisticated way. Based on an analysis of a diverse set of networks, we show that our smart local moving algorithm identifies community structures with higher modularity values than other algorithms for large-scale modularity optimization, among…
In this paper a simple but efficient real-time detecting algorithm is proposed for tracking community structure of dynamic networks. Community structure is intuitively characterized as divisions of network nodes into subgroups, within which nodes are densely connected while between which they are sparsely connected. To evaluate the quality of community structure of a network, a metric called modularity is proposed and many algorithms are developed on optimizing it. However, most of the modularity based algorithms deal with static networks and cannot be performed frequently, due to their high c…
This paper investigates community detection by modularity maximisation on bipartite networks. In particular we are interested in how the operation of projection, using one node set of the bipartite network to infer connections between nodes in the other set, interacts with community detection. We first define a notion of modularity appropriate for a projected bipartite network and outline an algorithm for maximising it in order to partition the network. Using both real and synthetic networks we compare the communities found by five different algorithms, where each algorithm maximises a differe…
We investigate the impact of community structure on information diffusion with the linear threshold model. Our results demonstrate that modular structure may have counter-intuitive effects on information diffusion when social reinforcement is present. We show that strong communities can facilitate global diffusion by enhancing local, intra-community spreading. Using both analytic approaches and numerical simulations, we demonstrate the existence of an optimal network modularity, where global diffusion require the minimal number of early adopters.
Detecting communities in a network, based only on the adjacency matrix, is a problem of interest to several scientific disciplines. Recently, Zhang and Moore have introduced an algorithm in [P. Zhang and C. Moore, Proceedings of the National Academy of Sciences 111, 18144 (2014)], called mod-bp, that avoids overfitting the data by optimizing a weighted average of modularity (a popular goodness-of-fit measure in community detection) and entropy (i.e. number of configurations with a given modularity). The adjustment of the relative weight, the "temperature" of the model, is crucial for getting a…
We introduce the Convex Hull of Admissible Modularity Partitions (CHAMP) algorithm to prune and prioritize different network community structures identified across multiple runs of possibly various computational heuristics. Given a set of partitions, CHAMP identifies the domain of modularity optimization for each partition ---i.e., the parameter-space domain where it has the largest modularity relative to the input set---discarding partitions with empty domains to obtain the subset of partitions that are "admissible" candidate community structures that remain potentially optimal over indicated…
Various attempts have been made in recent years to solve the Resolution Limit (RL) problem in community detection by considering variants of the modularity metric in the detection algorithms. These metrics purportedly largely mitigate the RL problem and are preferable to modularity in many realistic scenarios. However, they are not generally suitable for analyzing weighted networks or for detecting hierarchical community structure. Resolution limit problems can be complicated, though, and in particular it can be unclear when it should be considered as problem. In this paper, we introduce a met…
Heuristic and exact modularity optimization with size-constrained communities
Kellogg School of Management, Northwestern University（西北大学凯洛格管理学院）；Department of Mechanical and Industrial Engineering, University of Toronto（多伦多大学机械与工业工程系）；Centre for Science and Technology Studies (CWTS), Leiden University（莱顿大学科学技术研究中心）；Center for Complex Networks and Systems Research, Luddy School of Informatics, Computing, and Engineering, Indiana University Bloomington（印第安纳大学布鲁明顿分校卢迪信息、计算与工程学院复杂网络与系统研究中心）
Using an intuitive concept of what constitutes a meaningful community, a novel metric is formulated for detecting non-overlapping communities in undirected, weighted heterogeneous networks. This metric, modularity density, is shown to be superior to the versions of modularity density in present literature. Compared to the previous versions of modularity density, maximization of our metric is proven to be free from bias and better detect weakly-separated communities particularly in heterogeneous networks. In addition to these characteristics, the computational running time of our modularity den…
Modularity based community detection encompasses a number of widely used, efficient heuristics for identification of structure in networks. Recently, a belief propagation approach to modularity optimization provided a useful guide for identifying non-trivial structure in single-layer networks in a way that other optimization heuristics have not. In this paper, we extend modularity belief propagation to multilayer networks. As part of this development, we also directly incorporate a resolution parameter. We show that adjusting the resolution parameter affects the convergence properties of the a…
Maximizing the modularity of a network is a successful tool to identify an important community of nodes. However, this combinatorial optimization problem is known to be NP-complete. Inspired by recent nonlinear modularity eigenvector approaches, we introduce the modularity total variation $TV_Q$ and show that its box-constrained global maximum coincides with the maximum of the original discrete modularity function. Thus we describe a new nonlinear optimization approach to solve the equivalent problem leading to a community detection strategy based on $TV_Q$. The proposed approach relies on the…
Recently, a type of multi-resolution methods in community detection was introduced, which can adjust the resolution of modularity by modifying the modularity function with tunable resolution parameters, such as those proposed by Arenas, Fernandez and Gomez and by Reichardt and Bornholdt. In this paper, we show that these methods still have the intrinsic limitation-large communities may have been split before small communities become visible-because it is at the cost of the community stability that the enhancement of the modularity resolution is obtained. The theoretical results indicated that …
We introduce a metric space of clusterings, where clusterings are described by a binary vector indexed by the vertex-pairs. We extend this geometry to a hypersphere and prove that maximizing modularity is equivalent to minimizing the angular distance to some modularity vector over the set of clustering vectors. In that sense, modularity-based community detection methods can be seen as a subclass of a more general class of projection methods, which we define as the community detection methods that adhere to the following two-step procedure: first, mapping the network to a point on the hypersphe…
Modularity for multilayer networks, also called multislice modularity, is parametric to a resolution factor and an inter-layer coupling factor. The former is useful to express layer-specific relevance and the latter quantifies the strength of node linkage across the layers of a network. However, such parameters can be set arbitrarily, thus discarding any structure information at graph or community level. Other issues are related to the inability of properly modeling order relations over the layers, which is required for dynamic networks. In this paper we propose a new definition of modularity …
Modularity-based algorithms used for community detection have been increasing in recent years. Modularity and its application have been generating controversy since some authors argue it is not a metric without disadvantages. It has been shown that algorithms that use modularity to detect communities suffer a resolution limit and, therefore, it is unable to identify small communities in some situations. In this work, we try to apply a density optimization of communities found by the label propagation algorithm and study what happens regarding modularity of optimized results. We introduce a met…
Modularity, first proposed by [Newman and Girvan, 2004], is one of the most popular ways to quantify the significance of community structure in complex networks. It can serve as both a standard benchmark to compare different community detection algorithms, and an optimization objective to detect communities itself. Previous work on modularity has developed many efficient algorithms for modularity maximization. However, few of researchers considered the interpretation of the modularity function itself. In this paper, we study modularity from an information-theoretical perspective and show that …
Many real-world complex networks exhibit a community structure, in which the modules correspond to actual functional units. Identifying these communities is a key challenge for scientists. A common approach is to search for the network partition that maximizes a quality function. Here, we present a detailed analysis of a recently proposed function, namely modularity density. We show that it does not incur in the drawbacks suffered by traditional modularity, and that it can identify networks without ground-truth community structure, deriving its analytical dependence on link density in generic …
Many networks including social networks, computer networks, and biological networks are found to divide naturally into communities of densely connected individuals. Finding community structure is one of fundamental problems in network science. Since Newman's suggestion of using \emph{modularity} as a measure to qualify the goodness of community structures, many efficient methods to maximize modularity have been proposed but without a guarantee of optimality. In this paper, we propose two polynomial-time algorithms to the modularity maximization problem with theoretical performance guarantees. …
Complex systems are usually illustrated by networks which captures the topology of the interactions between the entities. To better understand the roles played by the entities in the system one needs to uncover the underlying community structure of the system. In recent years, systems with interactions that have various types or can change over time between the entities have attracted an increasing research attention. However, algorithms aiming to solve the key problem - community detection - in multilayer networks are still limited. In this work, we first introduce the multilayer network mode…
Community detection is one of the pivotal tools for discovering the structure of complex networks. Majority of community detection methods rely on optimization of certain quality functions characterizing the proposed community structure. Perhaps, the most commonly used of those quality functions is modularity. Many heuristics are claimed to be efficient in modularity maximization, which is usually justified in relative terms through comparison of their outcomes with those provided by other known algorithms. However as all the approaches are heuristics, while the complete brute-force is not fea…
SGH Warsaw School of Economics（华沙经济学院）；Ryerson University（瑞尔森大学）；Tutte Institute for Mathematics and Computing（塔特数学与计算研究所）
The Artificial Benchmark for Community Detection (ABCD) graph is a random graph model with community structure and power-law distribution for both degrees and community sizes. The model generates graphs with similar properties as the well-known LFR one, and its main parameter $ξ$ can be tuned to mimic its counterpart in the LFR model, the mixing parameter $μ$. In this paper, we investigate various theoretical asymptotic properties of the ABCD model. In particular, we analyze the modularity function, arguably, the most important graph property of networks in the context of community detection. …
In this paper we take a problem of unsupervised nodes clustering on graphs and show how recent advances in attention models can be applied successfully in a "hard" regime of the problem. We propose an unsupervised algorithm that encodes Bethe Hessian embeddings by optimizing soft modularity loss and argue that our model is competitive to both classical and Graph Neural Network (GNN) models while it can be trained on a single graph.
The identification of community structure in a social network is an important problem tackled in the literature of network analysis. There are many solutions to this problem using a static scenario, when facing a dynamic scenario some solutions may be adapted but others simply do not fit, moreover when considering the demand to analyze constantly growing networks. In this context, we propose an approach to the problem of community detection in dynamic networks based on a reinforcement learning strategy to deal with changes on big networks using a local optimization on the modularity score of t…
Recovering Fairness Directly from Modularity: a New Way for Fair Community Partitioning
School of Mathematics and Statistics（数学与统计学学院）；Xidian University（西安电子科技大学）；City Faculty of Data Science（数据科学城市学院）；University of Macau（澳门大学）；College of Mathematical Medicine（数学医学学院）；Zhejiang Normal University（浙江师范大学）
We study networks that display community structure -- groups of nodes within which connections are unusually dense. Using methods from random matrix theory, we calculate the spectra of such networks in the limit of large size, and hence demonstrate the presence of a phase transition in matrix methods for community detection, such as the popular modularity maximization method. The transition separates a regime in which such methods successfully detect the community structure from one in which the structure is present but is not detected. By comparing these results with recent analyses of maximu…
Modularity Based Community Detection in Hypergraphs
SGH Warsaw School of Economics（华沙经济学院）；Poznan University of Technology（波兹南理工大学）；Toronto Metropolitan University（多伦多都会大学）；Tutte Institute for Mathematics and Computing（塔特数学与计算研究所）
In this paper, we consider the community detection problem under either the stochastic block model (SBM) assumption or the degree-correlated stochastic block model (DCSBM) assumption. The modularity maximization formulation for the community detection problem is NP-hard in general. In this paper, we propose a sparse and low-rank completely positive relaxation for the modularity maximization problem, we then develop an efficient row-by-row (RBR) type block coordinate descent (BCD) algorithm to solve the relaxation and prove an $\mathcal{O}(1/\sqrt{N})$ convergence rate to a stationary point whe…
Many social networks and complex systems are found to be naturally divided into clusters of densely connected nodes, known as community structure (CS). Finding CS is one of fundamental yet challenging topics in network science. One of the most popular classes of methods for this problem is to maximize Newman's modularity. However, there is a little understood on how well we can approximate the maximum modularity as well as the implications of finding community structure with provable guarantees. In this paper, we settle definitely the approximability of modularity clustering, proving that appr…
The modularity is a quality function in community detection, which was introduced by Newman and Girvan (2004). Community detection in graphs is now often conducted through modularity maximization: given an undirected graph $G=(V,E)$, we are asked to find a partition $\mathcal{C}$ of $V$ that maximizes the modularity. Although numerous algorithms have been developed to date, most of them have no theoretical approximation guarantee. Recently, to overcome this issue, the design of modularity maximization algorithms with provable approximation guarantees has attracted significant attention in the …
University of California, Los Angeles（加利福尼亚大学洛杉矶分校）；University of Oxford（牛津大学）
Because networks can be used to represent many complex systems, they have attracted considerable attention in physics, computer science, sociology, and many other disciplines. One of the most important areas of network science is the algorithmic detection of cohesive groups (i.e., "communities") of nodes. In this paper, we algorithmically detect communities in social networks and image data by optimizing multislice modularity. A key advantage of modularity optimization is that it does not require prior knowledge of the number or sizes of communities, and it is capable of finding network partit…
Community detection is expensive, and the cost generally depends at least linearly on the number of vertices in the graph. We propose working with a reduced graph that has many fewer nodes but nonetheless captures key community structure. The K-core of a graph is the largest subgraph within which each node has at least K connections. We propose a framework that accelerates community detection by applying an expensive algorithm (modularity optimization, the Louvain method, spectral clustering, etc.) to the K-core and then using an inexpensive heuristic (such as local modularity maximization) to…
It is of paramount importance to uncover influential nodes to control diffusion phenomena in a network. In recent works, there is a growing trend to investigate the role of the community structure to solve this issue. Up to now, the vast majority of the so-called community-aware centrality measures rely on non-overlapping community structure. However, in many real-world networks, such as social networks, the communities overlap. In other words, a node can belong to multiple communities. To overcome this drawback, we propose and investigate the "Overlapping Modularity Vitality" centrality measu…
Revealing a community structure in a network or dataset is a central problem arising in many scientific areas. The modularity function $Q$ is an established measure quantifying the quality of a community, being identified as a set of nodes having high modularity. In our terminology, a set of nodes with positive modularity is called a \textit{module} and a set that maximizes $Q$ is thus called \textit{leading module}. Finding a leading module in a network is an important task, however the dimension of real-world problems makes the maximization of $Q$ unfeasible. This poses the need of approxima…
Deezer Research（Deezer研究院）；École Polytechnique（巴黎综合理工学院）；Institut Polytechnique de Paris（巴黎理工学院）；Athens University of Economics and Business（雅典经济与商业大学）
Graph autoencoders (GAE) and variational graph autoencoders (VGAE) emerged as powerful methods for link prediction. Their performances are less impressive on community detection problems where, according to recent and concurring experimental evaluations, they are often outperformed by simpler alternatives such as the Louvain method. It is currently still unclear to which extent one can improve community detection with GAE and VGAE, especially in the absence of node features. It is moreover uncertain whether one could do so while simultaneously preserving good performances on link prediction. I…
The generalized version of modularity for multilayer networks, a.k.a. multislice modularity, is characterized by two model parameters, namely resolution factor and inter-layer coupling factor. The former corresponds to a notion of layer-specific relevance, whereas the inter-layer coupling factor represents the strength of node connections across the network layers. Despite the potential of this approach, the setting of both parameters can be arbitrarily selected, without considering specific characteristics from the topology of the multilayer network as well as from an available community stru…
Multi-layer networks are networks on a set of entities (nodes) with multiple types of relations (edges) among them where each type of relation/interaction is represented as a network layer. As with single layer networks, community detection is an important task in multi-layer networks. A large group of popular community detection methods in networks are based on optimizing a quality function known as the modularity score, which is a measure of presence of modules or communities in networks. Hence a first step in community detection is defining a suitable modularity score that is appropriate fo…
