The hybrid perovskite CH3NH3PbX3 (X= Cl, Br, I) is a promising material for developing novel optoelectronic devices. Owing to the intrinsic non-layer structure, it remains challenging to synthesize molecularly thin CH3NH3PbX3 with large size. Here, we report a low-cost and highly efficient fabrication route to obtain large-scale single-crystalline 2D CH3NH3PbX3 perovskites on a mica substrate via liquid epitaxy. The 2D perovskite is characterized as 8 nm in thickness and hundreds of micrometers in lateral size. First-principles calculations suggest the strong potassium-halogen interactions at the perovskite/mica interface lower the interface energy of perovskites, driving their fast in-plane growth. Spectroscopic investigations reveal 2D CH3NH3PbBr3 possess small exciton binding energy of 30 meV, allowing a superior visible-light photodetector with a photoresponsivity of 126 A/W and a bandwidth exceeded 80 kHz. These features demonstrate that liquid epitaxy is a bottom-up approach to fabricate the non-layer structured 2D perovskites, which offer a new material platform for the device applications and fundamental investigations.
Precise arrays of sub-100 nm diameter nanodots are fabricated from magnetic oxide perovskites with the total coverage area up to 5 mm2. Epitaxial single crystal structure of the nanodots is demonstrated by cross-sectional TEM. Low temperature MFM study confirmed the ferromagnetism of the produced particles.
Using an extension of a first-principles method developed by King-Smith and Vanderbilt [Phys. Rev. B {\bf 49}, 5828 (1994)], we investigate the effects of in-plane epitaxial strain on the ground-state structure and polarization of eight perovskite oxides: BaTiO$_3$, SrTiO$_3$, CaTiO$_3$, KNbO$_3$, NaNbO$_3$, PbTiO$_3$, PbZrO$_3$, and BaZrO$_3$. In addition, we investigate the effects of a nonzero normal stress. The results are shown to be useful in predicting the structure and polarization of perovskite oxide thin films and superlattices.
Chalcogenide perovskites have emerged as a new class of electronic materials, but fundamental properties and applications of chalcogenide perovskites remain limited by the lack of high quality epitaxial thin films. We report epitaxial thin film growth of BaZrS3, a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out of plane and have a clear in-plane epitaxial relationship with the substrate. Electron microscopy studies confirm the presence of epitaxy for the first few layers of the film at the interface, even though awa…
Ferromagnetic insulators (FMIs) are one of the most important components in developing dissipationless electronic and spintronic devices. However, since ferromagnetism generally accompanies metallicity, FMIs are innately rare to find in nature. Here, novel room-temperature FMI films are epitaxially synthesized by deliberate control of the ratio of two B-site cations in the double perovskite Sr2FeReO6. In contrast to the known ferromagnetic metallic phase in stoichiometric Sr2FeReO6, a FMI state with a high Curie temperature (Tc~400 K) and a large saturation magnetization (MS~1.8 μB/f.u.) is fo…
Epitaxial III-V semiconductor heterostructures are key components in modern microelectronics, electro-optics and optoelectronics. With superior semiconducting properties, halide perovskite materials are rising as promising candidates for coherent heterostructure devices. In this report, spinodal decomposition is proposed and experimentally implemented to produce epitaxial double heterostructures in halide perovskite system. Pristine epitaxial mixed halide perovskites rods and films were synthesized via Van der Waals epitaxy by chemical vapor deposition method. At room temperature, photon was a…
The oxygen evolution reaction (OER) is considered a key reaction for electrochemical energy conversion but slow kinetics hamper application in electrolyzers, metal-air batteries and other applications that rely on sustainable protons from water oxidation. In this review, the prospect of epitaxial perovskite oxides for the OER at room temperature in alkaline media is reviewed with respect to fundamental insight into systematic trends of the activity. First, we thoroughly define the perovskite structure and its parameter space. Then, the synthesis methods used to make electrocatalytic epitaxial …
We investigate energetically favorable structures of ABO$_2$N oxynitrides as functions of pressure and strain via swarm-intelligence-based structure prediction methods, DFT lattice dynamics and first-principles molecular dynamics. We predict several thermodynamically stable polar oxynitride perovskites under high pressures. In addition, we find that ferroelectric polar phases of perovskite-structured oxynitrides can be thermodynamically stable and synthesized at high pressure on appropriate substrates. The dynamical stability of the ferroelectric oxynitrides under epitaxial strain at ambient p…
Polycrystalline Sr$_3$OsO$_6$, which is an ordered double-perovskite insulator, is synthesized via solid-state reaction under high-temperature and high-pressure conditions of 1200 $^\circ$C and 6 GPa. The synthesis enables us to conduct a comparative study of the bulk form of Sr$_3$OsO$_6$ toward revealing the driving mechanism of 1000 K ferromagnetism, which has recently been discovered for epitaxially grown Sr$_3$OsO$_6$ films. Unlike the film, the bulk is dominated by antiferromagnetism rather than ferromagnetism. Therefore, robust ferromagnetic order appears only when Sr$_3$OsO$_6$ is unde…
Epitaxial strain has been shown to drive structural phase transitions along with novel functionalities in perovskite-based thin-films. Aliovalent doping at the A-site can drive an insulator-to-metal and magnetic transitions in perovskites along with a variety of interesting structural and electronic phenomena. Using first-principles calculations, we demonstrate here, how coupling epitaxial strain with A-site hole doping in a multiferroic double perovskite, Bi2FeCrO6, could lead to mitigation of issues related to anti-site defects and lowered magnetisation in thin-films of the material. We also…
We demonstrate the making of BaZrS3 thin films by molecular beam epitaxy (MBE). BaZrS3 forms in the orthorhombic distorted-perovskite structure with corner-sharing ZrS6 octahedra. The single-step MBE process results in films smooth on the atomic scale, with near-perfect BaZrS3 stoichiometry and an atomically-sharp interface with the LaAlO3 substrate. The films grow epitaxially via two, competing growth modes: buffered epitaxy, with a self-assembled interface layer that relieves the epitaxial strain, and direct epitaxy, with rotated-cube-on-cube growth that accommodates the large lattice consta…
Optoelectronic technologies are based on families of semiconductor alloys. It is rare that a new semiconductor alloy family is developed to the point where epitaxial growth is possible; since the 1950s, this has happened approximately once per decade. Here we demonstrate epitaxial thin film growth of semiconducting chalcogenide perovskite alloys in the Ba-Zr-S-Se system by gas-source molecular beam epitaxy (MBE). We stabilize the full range y = 0 ... 3 of compositions BaZrS$_{(3-y)}$Se$_y$ in the perovskite structure, up to and including BaZrSe$_3$, by growing on BaZrS$_3$ epitaxial templates.…
Intense hard x-ray pulses from a free-electron laser induce irreversible structural damage in a perovskite oxide epitaxial heterostructure when pulse fluences exceed a threshold value. The intensity of x-ray diffraction from a 25-nm thick epitaxial BiFeO$_{3}$ layer on a SrTiO$_{3}$ substrate measured using a series of pulses decreases abruptly with a per-pulse fluence of 2.7 x 10$^{6}$ photons $μ$m$^{-2}$ at 9.7 keV photon energy, but remains constant for 1.3 x 10$^{6}$ photons $μ$m$^{-2}$ or less. The damage resulted in the destruction of the BiFeO$_{3}$ thin film within the focal spot area …
We demonstrate fabrication of atomically sharp interfaces between nitride antiperovskite Mn$_{3}$GaN and oxide perovskites (La$_{0.3}$Sr$_{0.7}$)(Al$_{0.65}$Ta$_{0.35}$)O$_{3}$ (LSAT) and SrTiO$_{3}$ as paradigms of nitride-antiperovskite/oxide-perovskite heterostructures. Using a combination of scanning transmission electron microscopy (STEM), atomic-resolution spectroscopic techniques, and first-principle calculations, we investigated the atomic-scale structure, composition, and boding at the interface. We show that the epitaxial growth between the antiperovskite and perovskite compounds is …
Oxide electronics relies on the availability of epitaxial oxide thin films. The extreme flexibility of the chemical composition of ABO3 perovskites and the broad spectrum of properties they cover, inspire the creativity of scientists and place perovskites in the lead of functional materials for advanced technologies. Moreover, emerging properties are being discovered at interfaces between distinct perovskites that could not be anticipated on the basis of those of the adjacent epitaxial layers. All dreamed new prospects require the use of suitable substrates for epitaxial growth. Perovskite sin…
The first examples of single crystal epitaxial thin films of a high entropy perovskite oxide are synthesized. Pulsed laser deposition is used to grow the configurationally disordered ABO3 perovskite, Ba(Zr0.2Sn0.2Ti0.2Hf0.2Nb0.2)O3, epitaxially on SrTiO3 and MgO substrates. X-ray diffraction and scanning transmission electron microscopy demonstrate that the films are single phase with excellent crystallinity and atomically abrupt interfaces to the underlying substrates. Atomically-resolved electron energy loss spectroscopy mapping shows a uniform and random distribution of all B-site cations. …
We report and compare the structural, magnetic, and optical properties of ordered La2NiMnO6 thin films and its disordered LaNi0.5Mn0.5O3 counterpart. An x-ray diffraction study reveals that the B-site Ni/Mn ordering induces additional XRD reflections as the crystal symmetry is transformed from a pseudocubic perovskite unit cell in the disordered phase to a monoclinic form with larger lattice parameters for the ordered phase. Polarized Raman spectroscopy studies reveal that the ordered samples are characterized by additional phonon excitations that are absent in the disordered phase. The appear…
In this work the charge transport properties of charge ordered (CO) La1-xCaxMnO3 (LCMO) (x= 0.55, 0.67) epitaxial thin films and polycrystals are discussed following the recent controversy of localised electron states vs. weakly or de- localised charge density wave (CDW) states in CO manganites. The transport properties were investigated by current vs. voltage, direct current resistivity vs. temperature, local activation energy vs. temperature, magnetoresistance and admittance spectroscopy measurements, which all indicated a localised electronic structure in the single CO phase. Delocalised ch…
We report on atomic ordering of B-site transition-metals and magnetic properties of epitaxial La2CrFeO6 double-perovskite films grown by pulsed-laser deposition under various conditions. The highest ordered sample exhibited a fraction of antisite-disorder of only 0.05 and a saturation magnetization of ~2μ_{B} per formula unit at 5 K. The result is consistent with the antiferromagnetic ordering of local spin moment (3d^{3}_{\downarrow}3d^{5}_{\uparrow}; S = -3/2+5/2 = 1). Therefore, the magnetic ground state of La2CrFeO6 double-perovskite that has been long debate is unambiguously revealed to b…
We investigated SrFeO$_{3-x}$ thin films on a SrTiO$_3$ (001) substrate prepared via pulsed laser epitaxy using an optical spectroscopy technique. The oxygen vacancy level ($x$) was controlled by post-annealing processes at different oxygen partial pressures. We achieved a brownmillerite(BM) structure at $x =$ 0.5 and observed the evolution of the crystal structure from BM into perovskite(PV) as the oxygen concentration increased. We observed the evolution of infrared-active phonons with respect to the oxygen concentration, which was closely related to the structural evolution observed via X-r…
We demonstrate efficient intrinsic spin-to-charge current conversion in a two-dimensional electron gas using an all-epitaxial single-crystal heterostructure of LaSrMnO3/ LaAlO3 (LAO)/ SrTiO3 (STO), which can suppress spin scattering and give us an ideal environment to investigate intrinsic spin-charge conversion. With decreasing temperature to 20 K, the spin-to-charge conversion efficiency is drastically enhanced to +3.9 nm, which is the largest positive value ever reported for LAO/STO. Our band-structure calculation well reproduces this behavior and predicts further enhancement by controlling…
5d iridates have shown vast emergent phenomena due to a strong interplay among its lattice, charge and spin degrees of freedom, because of which the potential in spintronic application of the thin-film form is highly leveraged. Here we have epitaxially stabilized perovskite SrIr$_{0.8}$Sn$_{0.2}$O$_3$ on [001] SrTiO$_3$ substrates through pulsed laser deposition and systematically characterized the structural, electronic and magnetic properties. Physical properties measurements unravel an insulating ground state with a weak ferromagnetism in the compressively strained epitaxial film. The octah…
First principles calculations are used to investigate the effects of epitaxial strain on the structure of the perovskite oxide CaTiO$_3$, with particular focus on the stabilization of a ferroelectric phase related to a polar instability hidden in the orthorhombic equilibrium bulk $Pbnm$ structure but found in previous first-principles studies of the ideal cubic perovskite high-symmetry reference structure. At 1.5% strain, we find an epitaxial orientation transition between the $ab$-$ePbnm$ phase, favored for compressive strains, and the $c$-$ePbnm$ phase. For larger tensile strains, a polar in…
Exploring epitaxial structures for electrically pumped perovskite lasers: a study of CsPb(Br,I)$_3$ based on the \textit{ab initio} Bethe-Salpeter equation
Strong spin-orbit coupled 5d transition metal based ABO3 oxides, especially iridates, allow tuning parameters in the phase diagram and may demonstrate important functionalities, for example, by means of strain effects and symmetry-breaking, because of the interplay between the Coulomb interactions and strong spin-orbit coupling. Here, we have epitaxially stabilized high quality thin films of perovskite (Pv) CaIrO3. Film on the best lattice-matched substrate shows semi-metal-like characteristics. Intriguingly, imposing tensile or compressive strain on the film by altering the underlying lattice…
We investigate the effect of epitaxial strain on the Mott metal-insulator transition (MIT) in perovskite systems with d^1 and d^2 electron configuration of the transition metal (TM) cation. We first discuss the general trends expected from the changes in the crystal-field splitting and in the hopping parameters that are induced by epitaxial strain. We argue that the strain-induced crystal-field splitting generally favors the Mott-insulating state, whereas the strain-induced changes in the hopping parameters favor the metallic state under compressive strain and the insulating state under tensil…
We present a study of the lattice response to the compressive and tensile biaxial stress in La0.67Sr0.33MnO3 (LSMO) and SrRuO3 (SRO) thin films grown on a variety of single crystal substrates: SrTiO3, DyScO3, NdGaO3 and (La,Sr)(Al,Ta)O3. The results show, that in thin films under misfit strain, both SRO and LSMO lattices, which in bulk form have orthorhombic (SRO) and rhombohedral (LSMO) structures, assume unit cells that are monoclinic under compressive stress and tetragonal under tensile stress. The applied stress effectively modifies the BO6 octahedra rotations, which degree and direction c…
Halide Perovskite-Chalcohalide Nanocrystal Heterostructures as a Platform for the Synthesis and Investigation of the CsPbCl3-CsPbI3 Epitaxial Interface
Polar heterogeneous photocatalysts were shown to lead to enhanced charge-carrier separation that results in superior activity for example for photocatalytic water splitting. Promising photocatalyst materials such as oxynitrides can be rendered polar by epitaxial strain, which however also increases their band gap, making them unsuitable for visible light absorption. This suggests a trade-off between small band gaps and polar distortions - both being crucial for the catalyst's efficiency. In this paper we investigate, using density functional theory calculations, the suitability of strained AB(…
We prepared high epitaxial thin films of the compound Sr_2FeMoO_6 with narrow rocking curves by pulsed laser deposition. The diagonal and nondiagonal elements of the resistivity tensor were investigated at temperatures from 4 K up to room temperature in magnetic fields up to 8 T. An electronlike ordinary Hall effect and a holelike anomalous Hall contribution are observed. Both coefficients have reversed sign compared to the colossal magnetoresistive manganites. We found at 300 K an ordinary Hall coefficent of -1.87x10^{-10} m^3/As, corresponding to a nominal charge carrier density of four elec…
We investigated the electronic properties of epitaxially stabilized perovskite SrIrO3 and demonstrated the effective strain-control on its electronic structure. Comprehensive transport measurements showed that the strong spin-orbit coupling renders a novel semimetallic phase for the J_eff=1/2 electrons rather than an ordinary correlated metal, elucidating the nontrivial mechanism underlying the dimensionality-controlled metal-insulator transition in iridates. The electron-hole symmetry of this correlated semimetal was found to exhibit drastic variation when subject to bi-axial strain. Under co…
The high room temperature mobility and the electron effective mass in BaSnO$_3$ are investigated in depth by evaluation of the free carrier absorption observed in infrared spectra for epitaxial films with free electron concentrations from $8.3 \times 10^{18}$ to $7.3 \times 10^{20}$~cm$^{-3}$. Both the optical band gap widening by conduction band filling and the carrier scattering mechanisms in the low and high doping regimes are consistently described employing parameters solely based on the intrinsic physical properties of BaSnO$_3$. The results explain the current mobility limits in epitaxi…
Hole-doped perovskite bismuthates such as Ba$_{1-x}$K$_x$BiO$_3$ and Sr$_{1-x}$K$_x$BiO$_3$ are well-known bismuth-based oxide high-transition-temperature superconductors. Reported thin bismuthate films show relatively low quality, likely due to their large lattice mismatch with the substrate and a low sticking coefficient of Bi at high temperatures. Here, we report the successful epitaxial thin film growth of the parent compound strontium bismuthate SrBiO$_3$ on SrO-terminated SrTiO$_3$ (001) substrates by molecular beam epitaxy. Two different growth methods, high-temperature co-deposition or…
This work explores the impact of in-plane bi-axial (epitaxial) strain on the cation distribution and electric polarization of the Aurivillius-phase compound Bi$_5$FeTi$_3$O$_{15}$ using first-principles electronic structure calculations. Our calculations indicate that the site preference of the Fe$^{3+}$ cation can be controlled via epitaxial strain. Tensile strain enhances the preference for the inner sites within the perovskite-like layers of the Aurivillius-phase structure, whereas compressive strain favors occupation of the outer sites within the perovskite-layers, i.e., the sites close to…
Perovskite chalcogenides have emerged as a new class of semiconductors with tunable band gap in the visible-infrared region. High quality thin films are critical to understand the fundamental properties and realize the potential applications based on these materials. We report growth of quasi-epitaxial thin films of quasi one-dimensional (quasi-1D) hexagonal chalcogenide BaTiS$_3$ by pulsed laser deposition. We identified the optimal growth conditions by varying the growth parameters such as the substrate temperature and H2S partial pressure and examined their effects on the thin film structur…
We performed first principles calculations for epitaxially strained orthorhombic CaTiO$_3$. The computational results reveal the existence of a metastable ferroelectric phase at compressive strain with unexpected in-plane polarization. Symmetry analysis indicates that two distortion modes at the X point combine to induce the polarization, leading to characterization as a hybrid improper ferroelectric. Our work demonstrates a mechanism for improper ferroelectricity in simple perovskites without the need for symmetry lowering by layering or cation ordering.
The influence of the deposition pressure PO2 and substrate temperature TS during the growth of Bi2FeCrO6 thin films grown by pulsed laser deposition has been investigated. It is found that the high volatility of Bi makes the deposition very difficult and that the growth of pure Bi2FeCrO6 thin films on SrTiO3 substrates is possible only in a narrow deposition parameter window. We find that the pure Bi2FeCrO6 phase is formed within a narrow window around an oxygen pressure PO2 =1.210-2 mbar and around a substrate temperature TS=680 degC. At lower temperature or higher pressure, Bi7.38Cr0.62O12+x…
Synthesizing metastable phase often opens new functions in materials but is a challenging topic. Thin film techniques have advantages to form materials which do not exist in nature since nonequilibrium processes are frequently utilized. In this study, we successfully synthesize epitaxially stabilized new compound of perovskite Eu2+Mo4+O3 as a thin film form by a pulsed laser deposition. Analogous perovskite SrMoO3 is a highly conducting paramagnetic material, but Eu2+ and Mo4+ are not compatible in equilibrium and previous study found more stable pyrochlore Eu23+Mo24+O7 prefers to form. By usi…
Thin films of perovskite Ruthenates of the general formula ARuO3 (A = Ca and Sr) are versatile electrical conductors for viable oxide electronics. They are also scientifically intriguing, as they exhibit non-trivial electromagnetic ground states depending on the A-site element. Among them, realization of the cubic perovskite (3C) BaRuO3 thin film has been a challenge so far, because the 3C phase is metastable with the largest formation energy among the various polymorph phases of BaRuO3. In this study, we successfully prepared 3C BaRuO3 thin films employing epitaxial stabilization. The 3C BaRu…
We report on the preparation and characterization of epitaxial thin films of the double-perovskite Sr$_2$CrWO$_6$ by Pulsed Laser Deposition (PLD). On substrates with low lattice mismatch like SrTiO$_3$, epitaxial Sr$_2$CrWO$_6$ films with high crystalline quality can be grown in a molecular layer-by-layer growth mode. Due to the similar ionic radii of Cr and W, these elements show no sublattice order. Nevertheless, the measured Curie temperature is well above 400 K. Due to the reducing growth atmosphere required for double perovskites, the SrTiO$_3$ substrate surface undergoes an insulator-me…
We have grown lead iron niobate thin films with composition Pb(Fe1/2Nb1/2)O3 (PFN) on (0 0 1) SrTiO3 substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar thermodynamic stability spaces, a pyrochlore phase often coexists with the PFN perovskite phase. By optimizing the kinetic parameters, we succeeded in identifying a deposition window which resulted in epitaxial perovskite-phase PFN thin films with no identifiable trace of impurity phases appearing in the X-ray diffractograms. PFN films having thicknesses between 20 a…
We report surface reconstruction (RC)-dependent growths of SrTiO3 and SrVO3 on a SrTiO3 (001) surface with two different coexisting surface RCs, namely (2x1) and c(6x2). Up to the coverage of several layers, epitaxial growth was forbidden on the c(6x2) RC under the growth conditions that permitted layer-by-layer epitaxial growth on the (2x1) RC. Scanning tunneling microscopy examination of the lattice structure of the c(6x2) RC revealed that this RC-selective growth mainly originated from the significant structural/stoichiometric dissimilarity between the c(6x2) RC and the cubic perovskite fil…
We investigate the variation of the spontaneous ferroelectric polarization with epitaxial strain for BaTiO$_3$, PbTiO$_3$, LiNbO$_3$, and BiFeO$_3$ using first principles calculations. We find that while the strain dependence of the polarization is very strong in the simple perovskite systems BaTiO$_3$ and PbTiO$_3$ it is only weak in LiNbO$_3$ and BiFeO$_3$. We show that this different behavior can be understood purely in terms of the piezoelectric and elastic constants of the unstrained bulk material, and we discuss several factors that determine the strain behavior of a certain material.
Developing materials that can lead to compact versions of artificial neurons (neuristors) and synapses (memristors) is the main aspiration of the nascent neuromorphic materials research field. Oscillating circuits are interesting as neuristors, emulating the firing of action potentials. We present room-temperature self-oscillating devices fabricated from epitaxial thin films of semiconducting TbMnO3. We show that these electrical oscillations induce concomitant mechanical oscillations that produce audible sound waves, offering an additional degree of freedom to interface with other devices. Th…
Metal halide perovskites have recently emerged as promising materials for the next generation of optoelectronic devices owing to their remarkable intrinsic properties. In the growth of perovskite crystals, the substrates are essential and play a vital role. Herein, substrate engineering in the growth of perovskite crystals have been reviewed. Particularly, various modified strategies and corresponding mechanism based on the substrate engineering applied to the optimization of thickness, nucleation and growth rate are highlighted. Then the alterable adhesion to substrates will also be discussed…
In this work, we use density functional theory calculations to demonstrate how spontaneous electric polarizations can be induced \textit{via} a hybrid improper ferroelectric mechanism in iodide perovskites, a family well-known to display solar-optimal band gaps, to create new materials for photoferroic applications. We first assemble three chemically distinct ($A$$A^{\prime}$)($B$$B^{\prime}$)I$_6$ double perovskites using centrosymmetric $AB$I$_3$ perovskite iodides (where $A$ = Cs, Rb, K and $B$ = Sn, Ge) as building units. In each superlattice, we investigate the effects of three types of $…
Electron-boson interaction is fundamental to a thorough understanding of various exotic properties emerging in many-body physics. In photoemission spectroscopy, photoelectron emission due to photon absorption would trigger diverse collective excitations in solids, including the emergence of phonons, magnons, electron-hole pairs, and plasmons, which naturally provides a reliable pathway to study electron-boson couplings. While fingerprints of electron-phonon/-magnon interactions in this state-of-the-art technique have been well investigated, much less is known about electron-plasmon coupling, a…
Atomic-Scale Surface Imaging of bulk Epitaxial CsPbBr3 Perovskite Single Crystals on Mica using Light Assisted Scanning Tunneling Microscopy at Low-Temperature (80 K)
Institut FEMTO-ST, Univ. Marie et Louis Pasteur, CNRS（FEMTO-ST研究所，玛丽和路易·巴斯德大学，法国国家科学研究中心）；Department of Physics and Astronomy, Rutgers, the State University of New Jersey（物理与天文学系，新泽西州立罗格斯大学）；Institut des Sciences Moléculaires d’Orsay (ISMO), CNRS, Univ. Paris Sud, Université Paris-Saclay（奥赛分子科学研究所（ISMO），法国国家科学研究中心，巴黎南大学，巴黎-萨克雷大学）
The epitaxial growth of functional materials using a substrate with a graphene layer is a highly desirable method for improving structural quality and obtaining free-standing epitaxial nano-membranes for scientific study, applications, and economical reuse of substrates. However, the aggressive oxidizing conditions typically employed to grow epitaxial perovskite oxides can damage graphene. Here, we demonstrate a technique based on hybrid molecular beam epitaxy that does not require an independent oxygen source to achieve epitaxial growth of complex oxides without damaging the underlying graphe…
