We report surface reconstruction (RC)-dependent growths of SrTiO3 and SrVO3 on a SrTiO3 (001) surface with two different coexisting surface RCs, namely (2x1) and c(6x2). Up to the coverage of several layers, epitaxial growth was forbidden on the c(6x2) RC under the growth conditions that permitted layer-by-layer epitaxial growth on the (2x1) RC. Scanning tunneling microscopy examination of the lattice structure of the c(6x2) RC revealed that this RC-selective growth mainly originated from the significant structural/stoichiometric dissimilarity between the c(6x2) RC and the cubic perovskite films. As a result, the formation of SrTiO3 islands was forbidden from the nucleation stage.
We use density functional theory calculations to show that the LaAlO3|SrTiO3 interface between insulating perovskite oxides is borderline in satisfying the Stoner criterion for itinerant ferromagnetism and explore other oxide combinations with a view to satisfying it more amply. The larger lattice parameter of an LaScO3|BaTiO3 interface is found to be less favorable than the greater interface distortion of LaAlO3|CaTiO3. Compared to LaAlO3|SrTiO3, the latter is predicted to exhibit robust magnetism with a larger saturation moment and a higher Curie temperature. Our results provide support for …
It is highly desirable to search for promising two-dimensional (2D) monolayer materials for deep insight of 2D materials and applications. We use first-principles method to investigate tetragonal perovskite oxide monolayers as 2D materials. We find four stable 2D monolayer materials from SrTiO$_3$, LaAlO$_3$, KTaO$_3$, and BaFeO$_3$, denoting them as STO-ML, LAO-ML, KTO-ML, and BFO-ML. Our further study shows that through overcoming dangling bonds the first three monolayers are 2D wide-gap semiconducotors, and BFO-ML is a 2D isotropic Heisenberg ferromagnetic metal. There is a large electrosta…
Perovskites and related structures are renowned for technologically useful applications. The structural variations in perovskite crystals result in novel properties which can be regulated by external forces. The study attempts to regulate distortion of a perovskite compound LaFeO3 driven solely by reduced graphene oxide (RGO) and to demonstrate the effect using a critical parameter - electrochemical conductivity. A series of graphene concentration varied nanocomposites were synthesized via hydrothermal method. The crystal distortion is investigated using X-ray diffraction and Rietveld refineme…
Most recently, orbital-selective quantum well states of $d$ electrons have been experimentally observed in SrVO$_3$ ultrathin films [K. Yoshimatsu et. al., Science 333, 319 (2011)] and SrTiO$_3$ surfaces [A. F. Santander-Syro et. al., Nature 469, 189 (2011)]. Hitherto, one tries to explain these experiments by a nearly free electron (NFE) model, an approach widely used for delocalized electrons in semiconductor heterostructures and simple metal films. We show that a tight binding (TB) model is more suitable for describing heterostructures with more localized $d$ electrons. In this paper, we co…
The structural, elastic, magnetic properties, as well as electronic structure and chemical bonding picture of new oxide 3d1-perovskite BaVO3, recently synthesized, were systematically investigated involving the first-principles FLAPW-GGA calculations. The obtained results are discussed in comparison with available experimental data, as well as with those obtained before for isostructural and isoelectronic SrVO3 perovskite.
We propose an inexpensive scalable approach for achieving extremely high values of Seebeck coefficient ($α$) by exploiting the natural superlattice structure in Aurivillius phase oxides. In particular, we report an $α\approx $ 319\,mV/K at 300\,K in a composite of Aurivillius phase compound SrBi$_4$Ti$_4$O$_{15}$ (as a matrix) and a perovskite phase material (e.g., La$_{0.7}$Sr$_{0.3}$MnO$_3$ or, La$_{0.7}$Sr$_{0.3}$CoO$_3$ as filler). Such a colossal value of $α$ can be attributed to contributions from the enhanced density of states due to the effective low dimensional character of Bi$_2$O$_2…
The energetics of vicinal SrTiO$_3$(001) and DyScO$_3$(110), prototypical perovskite vicinal surfaces, has been studied using topographic atomic force microscopy imaging. The kink formation and strain relaxation energies are extracted from a statistical analysis of the step meandering. Both perovskite surfaces have very similar kink formation energies and exhibit a similar triangular step undulation. Our experiments suggest that the energetics of perovskite oxide surfaces is mainly governed by the local oxygen coordination.
A major impediment towards realizing technologies based on the emerging principles of antiferromagnetic spintronics is the shortage of suitable materials. In this paper, we propose a design of polar|nonpolar heterostructures of perovskite oxides, where a single unit cell of SrIrO3 is sandwiched between a thin film of LaAlO3 and a substrate of SrTiO3. Our calculations within the framework of density-functional theory + Hubbard U + spin-orbit coupling reveal a two-dimensional conducting layer with electron and hole pockets at the interface, exhibiting a strong anisotropic Rashba-Dresselhaus effe…
ABO3 oxides with the perovskite-related structures are attracting significant interest due to their promising physical and chemical properties for many applications requiring tunable chemistry, including fuel cells, catalysis, and electrochemical water splitting. Here we report on the crystal structure of the entire family of perovskite oxides with ABO3 stoichiometry, where A and B are Ba, Sr, Mn, Ce. Given the vast size of this chemically complex material system, exploration for stable perovskite-related structures with respect to its constituent elements and annealing temperature is performe…
We perform first-principles density functional calculations to explore the role of substrate proximity effects on the octahedral rotation patterns in perovskite oxide superlattices. With cubic perovskite SrFeO$_3$ as our model film and tetragonal SrTiO$_3$ as the substrate, we show that in most cases the substrate octahedral rotation patterns propagate into the film across the heterointerface. We also identify elastic boundary conditions for which the enforced structural coherence induces atomic displacement patterns that are not found in the bulk phase diagram of either individual constituent…
We demonstrate efficient intrinsic spin-to-charge current conversion in a two-dimensional electron gas using an all-epitaxial single-crystal heterostructure of LaSrMnO3/ LaAlO3 (LAO)/ SrTiO3 (STO), which can suppress spin scattering and give us an ideal environment to investigate intrinsic spin-charge conversion. With decreasing temperature to 20 K, the spin-to-charge conversion efficiency is drastically enhanced to +3.9 nm, which is the largest positive value ever reported for LAO/STO. Our band-structure calculation well reproduces this behavior and predicts further enhancement by controlling…
The discovery of two-dimensional electron gases (2DEGs) at the heterointerface between two insulating perovskite-type oxides, such as LaAlO3 and SrTiO3, provides opportunities for a new generation of all-oxide electronic and photonic devices. However, significant improvement of the interfacial electron mobility beyond the current value of approximately 1,000 cm2V-1s-1 (at low temperatures), remains a key challenge for fundamental as well as applied research of complex oxides. Here, we present a new type of 2DEG created at the heterointerface between SrTiO3 and a spinel γ-Al2O3 epitaxial film w…
Perovskite oxides exhibit a rich variety of structural phases hosting different physical phenomena that generate multiple technological applications. We find that topological phonons, i.e., nodal rings, nodal lines, and Weyl points, are ubiquitous in oxide perovskites in terms of structures (tetragonal, orthorhombic, and rhombohedral), compounds (BaTiO3, PbTiO3, and SrTiO3), and external conditions (photoexcitation, strain, and temperature). In particular, in the tetragonal phase of these compounds, all types of topological phonons can simultaneously emerge when stabilized by photoexcitation, …
We report calculations indicating that amorphous RAO$_3$ oxides, with R and A trivalent cations, have approximately the same static dielectric constant as their perovskite crystal phase. The effect is due to the disorder-activated polar response of non-polar crystal modes at low frequency, which compensates a moderate but appreciable reduction of the ionic dynamical charges. The dielectric response was studied via density-functional perturbation theory. Amorphous samples were generated by molecular dynamics melt-and-quench simulations.
Transition-metal perovskite oxides constitute a series of functional material systems for electronics, catalysis and energy-conversion processes, in which oxygen migration and evolution play a key role. However, the stable metal-oxygen (M-O) bond forms large energy barrier inhibiting ion diffusion. Therefore, seeking efficient and facile approaches to accelerate oxygen kinetics has become a significant issue. Here, the interaction (interfacial charge transfer and cooperative bonding) between noble metal (Pt, Ag) and perovskites oxide (SrCoO3-delta) is employed to weaken (M-O) bond and decrease…
The oxygen evolution reaction (OER) is considered a key reaction for electrochemical energy conversion but slow kinetics hamper application in electrolyzers, metal-air batteries and other applications that rely on sustainable protons from water oxidation. In this review, the prospect of epitaxial perovskite oxides for the OER at room temperature in alkaline media is reviewed with respect to fundamental insight into systematic trends of the activity. First, we thoroughly define the perovskite structure and its parameter space. Then, the synthesis methods used to make electrocatalytic epitaxial …
The optimization of properties of perovskite oxides has drawn interest on account of their diverse areas of application. In this work, the hierarchical clustering technique is used to reduce the multi-collinearity among selected features from literature that are reported to have an effect on perovskite formation and stability. Operating on the vast composition space of double oxide perovskite compositions available in literature and online repositories, in this manuscript, an attempt has been made to extract the relationship between the composition and structure to predict their formability an…
Two-dimensional (2D) magnets have broad application prospects in the spintronics, but how to effectively control them with a small electric field is still an issue. Here we propose that 2D magnets can be efficiently controlled in a multiferroic heterostructure composed of 2D magnetic material and perovskite oxide ferroelectric (POF) whose dielectric polarization is easily flipped under a small electric field. We illustrate the feasibility of such strategy in the bilayer CrI3/BiFeO3(001) heterostructure by using the first-principles calculations. Different from the traditional POF multiferroic …
Two-dimensional (2D) materials are able to strongly confine light hybridized with collective excitations of atoms, enabling electric-field enhancements and novel spectroscopic applications. Recently, freestanding monolayers of oxide perovskites have been synthesized, which possess highly infrared-active phonon modes and a complex interplay of competing interactions. In this study, we evaluate central figures of merit for phonon polaritons in the tetragonal phases of the 2D perovskites SrTiO$_3$, KTaO$_3$, and LiNbO$_3$, using density functional theory calculations. Specifically, we compute the…
This article reviews the polarizability model and its applications to ferroelectric perovskite oxides. The motivation for the introduction of the model is discussed and nonlinear oxygen ion polarizability effects and their lattice dynamical implementation outlined. While a large part of this work is dedicated to results obtained within the self-consistent-phonon approximation (SPA), also nonlinear solutions of the model are handled which are of interest to the physics of relaxor ferroelectrics, domain wall motions, incommensurate phase transitions. The main emphasis is to compare the results o…
In this comment to [S. Lenjer, O. F. Schirmer, H. Hesse, and Th. W. Kool, Phys. Rev. B {\bf 66}, 165106 (2002)] we discuss the electronic structure of oxygen vacancies in perovskites. First principles computations are in favour of rather deep levels in these vacancies, and Lenjer et al suggest that the electrons' interaction energy is negative, but data on electroconductivity are against.
Using a CO$_2$ laser to directly heat the crystals from the back side, SrTiO$_3$ substrates may be thermally prepared in situ for epitaxy without the need for ex-situ etching and annealing. We find that the formation of large terraces with straight steps at 900-1100 °C is independent from the formation of the ideal surface reconstruction for epitaxy, which requires temperatures in excess of 1200 °C to complete. The process may be universal, at least for perovskite oxide surfaces, as it also works, at different temperatures, for LaAlO$_3$ and NdGaO$_3$, two other widely used oxide substrate mat…
Functional oxide perovskites are the pillar of cutting-edge technological applications. Density functional theory (DFT) simulations are the theoretical methods of choice to understand and design perovskite materials. However, tests on the reliability of DFT to describe fundamental properties of oxide perovskites are scarce and mostly ill-defined due to a lack of rigorous theoretical benchmarks for solids. Here, we present a quantum Monte Carlo benchmark study of DFT on the archetypal perovskite BaTiO$_{3}$ (BTO). It shows that no DFT approximation can simultaneously reproduce the energy, struc…
The use of microwave irradiation is a promising alternative heat source for the synthesis of inorganic materials such as perovskite oxides. The method offers massive energy and time savings as compared to the traditional ceramic method. In this work we review the basic principles of the microwave heating mechanism based on interactions between dipoles in the material and the electromagnetic microwave. Furthermore, we comment on and classify all different sub-types of microwave synthesis such as solid-state microwave and microwave assisted hydrothermal synthesis. In the experimental part of thi…
Perovskite transition-metal oxides are networks of corner-sharing octahedra whose tilts and distortions are known to affect their electronic and magnetic properties. We report calculations on a model interfacial structure to avoid chemical influences and show that the symmetry mismatch imposes an interfacial layer with distortion modes that do not exist in either bulk material, creating new interface properties driven by symmetry alone. Depending on the resistance of the octahedra to deformation, the interface layer can be as small as one unit cell or extend deep into the thin film.
There are two silver perovskite oxides: AgNbO3 and AgTaO3. AgNbO3 has a noncentrosymmetric group of Pmc21 at room temperature with a ferri-electric ordering of polarization. Such a ferri-electric state with small polarization can be changed into a ferroelectric state with very large polarization by a high electric field or by a chemical modification. The induced ferroelectric phase shows promising electromechanical response for applications in piezoelectric devices. In contrast, AgTaO3 is a quantum paraelectric, but ferroelectricity also can be induced through chemical substitution. The findin…
We present an aberration corrected scanning transmission electron microscopy (ac-STEM) analysis of the perovskite (LaFeO3) and pyrochlore (Yb2Ti2O7 and Pr2Zr2O7) oxides and demonstrate that both the shape and contrast of visible atomic columns in annular dark-field (ADF) images are sensitive to the presence of nearby atoms of low atomic number (e.g. oxygen). We show that point defects (e.g. oxygen vacancies), which are invisible - or difficult to observe due to limited sensitivity - in X-ray and neutron diffraction measurements, are the origin of the complex magnetic ground state of pyrochlore…
Perovskite photovoltaics (PVs) have attracted attention because of their excellent power conversion efficiency (PCE). Critical issues related to large area PV performance, reliability and lifetime need to be addressed. Here, we show that doped metal oxides can provide ideal electron selectivity, improved reliability and stability for perovskite PVs. We report p-i-n perovskite PVs with device areas ranging from 0.09cm2 to 0.5cm2 incorporating a thick aluminum doped zinc oxide (AZO) electron selective contact with hysteresis-free PCE of over 13% and high fill factor values in the range of 80%. A…
Vacancy defects in thin film laser ablated SrTiO3 on SrTiO3 were identified using variable energy positron annihilation lifetime measurements. Strontium vacancy related defects were the dominant positron traps and, apart from in the top ~ 50 nm, were found to be uniformly distributed. The surface layer showed an increase in annihilation from larger open-volume defects, large vacancy clusters or nanovoids.
In this work multiferroic thin films of Bi containing perovskite oxides are discussed, where the driving force for ferroelectricity are the Bi3+ lone-pair electrons. First, a brief introduction of Bi containing multiferroic perovskite oxides will be presented to describe the mechanisms for establishing magnetic and ferroelectric order in these compounds and some recent developments in this field of research are reported. The second section addresses experimental aspects of epitaxial thin film growth of BiMnO3, (Bi0.9La0.1)2NiMnO6 (BLNMO) and BiFeO3 thin films by pulsed laser deposition. The th…
Thin films of perovskite oxides offer the possibility of combining emerging concepts of strongly correlated electron phenomena and spin current in magnetic devices. However, spin transport and magnetization dynamics in these complex oxide materials are not well understood. Here, we experimentally quantify spin transport parameters and magnetization damping in epitaxial perovskite ferromagnet/paramagnet bilayers of La$_{2/3}$Sr$_{1/3}$MnO$_3$/SrRuO$_3$ (LSMO/SRO) by broadband ferromagnetic resonance spectroscopy. From the SRO thickness dependence of Gilbert damping, we estimate a short spin dif…
Advances in synthesis techniques and materials understanding have given rise to oxide heterostructures with intriguing physical phenomena that cannot be found in their constituents. In these structures, precise control of interface quality, including oxygen stoichiometry, is critical for unambiguous tailoring of the interfacial properties, with deposition of the first monolayer being the most important step in shaping a well-defined functional interface. Here, we studied interface formation and strain evolution during the initial growth of LaAlO3 on SrTiO3 by pulsed laser deposition, in search…
The band offsets for nine heterojunctions between titanates, zirconates, and niobates with the cubic perovskite structure were calculated from first principles. The effect of strain in contacting oxides on their energy structure, many-body corrections to the position of the band edges (calculated in the GW approximation), and the splitting of the conduction band resulting from spin-orbit interaction were consistently taken into account. It was shown that the neglect of the many-body effects can lead to errors in determination of the band offsets up to 0.36 eV. The failure of the transitivity r…
Predicting the stability of the perovskite structure remains a longstanding challenge for the discovery of new functional materials for many applications including photovoltaics and electrocatalysts. We developed an accurate, physically interpretable, and one-dimensional tolerance factor, τ, that correctly predicts 92% of compounds as perovskite or nonperovskite for an experimental dataset of 576 $ABX_3$ materials ($\textit{X} =$ $O^{2-}$, $F^-$, $Cl^-$, $Br^-$, $I^-$) using a novel data analytics approach based on SISSO (sure independence screening and sparsifying operator). τ is shown to gen…
In this paper we report measurements of 1/f noise in a crystalline metallic oxide with perovskite structure down to 4.2K. The results show existence of localized excitations with average activation energy $\approx$ 70-80 meV which produce peak in the noise at T $\approx$ 35-40K. In addition, it shows clear evidence of tunnelling type two-level-systems (as in glasses) which show up in noise measurements below 30K.
We predict through our first-principles calculations that four double perovskite oxides of Bi2ABO6 (AB = FeMo, MnMo, MnOs, CrOs) are half-metallic ferrimagnets. Our calculated results shows that the four optimized structures have negative formation energy, from -0.42 to -0.26 eV per formula unit, which implies that they could probably be realized. In the case of Bi2FeMoO6, the half-metallic gap and Curie temperature are predicted to reach to 0.71 eV and 650 K, respectively, which indicates that high spin polarization could be kept at high temperatures far beyond room temperature. It is believe…
In the present paper, the electronic, structural, thermodynamic, and elastic properties of cubic $PbGeO_{3}$ perovskite oxide are presented and computed using the WIEN2K code. The structural properties have been evaluated and they are in good agreement with the theoretical and experimental data. A phonon dispersion is made and it reveals that the cubic $PbGeO_{3}$ perovskite is dynamically stable. In addition, the electronic properties of $PbGeO_{3}$ shows an opening gap energy, meaning a semiconductor behavior with an indirect band gap equal to $1.67 eV$. Moreover, the obtained elastic consta…
Tuning the work functions of materials is of practical interest for maximizing the performance of microelectronic and (photo)electrochemical devices, as the efficiency of these systems depends on the ability to control electronic levels at surfaces and across interfaces. Perovskites are promising compounds to achieve such control. In this work, we examine the work functions of more than 1,000 perovskite oxide surfaces (ABO$_3$) by data-driven (machine-learning) analysis and identify the factors that determine their magnitude. While the work functions of BO$_2$-terminated surfaces are sensitive…
Ferromagnetic insulators (FMIs) are one of the most important components in developing dissipationless electronic and spintronic devices. However, since ferromagnetism generally accompanies metallicity, FMIs are innately rare to find in nature. Here, novel room-temperature FMI films are epitaxially synthesized by deliberate control of the ratio of two B-site cations in the double perovskite Sr2FeReO6. In contrast to the known ferromagnetic metallic phase in stoichiometric Sr2FeReO6, a FMI state with a high Curie temperature (Tc~400 K) and a large saturation magnetization (MS~1.8 μB/f.u.) is fo…
With their broad range of magnetic, electronic and structural properties, transition metal perovskite oxides ABO3 have long served as a platform for testing condensed matter theories. In particular, their insulating character - found in most compounds - is often ascribed to dynamical electronic correlations through the celebrated Mott-Hubbard mechanism where gaping arises from a uniform, symmetry-preserving electron repulsion mechanism. However, structural distortions are ubiquitous in perovskites and their relevance with respect to dynamical correlations in producing this rich array of proper…
High entropy oxides (HEO) are a recently introduced class of oxide materials, which are characterized by a large number of elements (i.e. five or more) sharing one lattice site which crystallize in a single phase structure. One complex example of the rather young HEO family are the rare-earth transition metal perovskite high entropy oxides. In this comprehensive study, we provide an overview over the magnetic properties of three perovskite type high entropy oxides. The compounds have a rare-earth site which is occupied by five different rare-earth elements, while the transition metal site is o…
We report the first observation of coherent surface states on cubic perovskite oxide SrVO3(001) thin films through spectroscopic imaging scanning tunneling microscopy. A direct link between the observed atomic-scale interference patterns and the formation of a dxy-derived surface state is supported by first-principles calculations. Furthermore, we show that the apical oxygens on the topmost VO2 plane play a critical role in controlling the spectral weight of the observed coherent surface state.
Symbolic regression (SR) is an emerging method for building analytical formulas to find models that best fit data sets. Here, SR was used to guide the design of new oxide perovskite catalysts with improved oxygen evolution reaction (OER) activities. An unprecedentedly simple descriptor, μ/t, where μ and t are the octahedral and tolerance factors, respectively, was identified, which accelerated the discovery of a series of new oxide perovskite catalysts with improved OER activity. We successfully synthesized five new oxide perovskites and characterized their OER activities. Remarkably, four of …
An ab initio structure optimization technique is newly developed to determine the valley line on a total-energy surface for zone-center distortions of ferroelectric perovskite oxides and is applied to barium titanate BaTiO3 and lead titanate PbTiO3. The proposed technique is an improvement over King-Smith and Vanderbilt's scheme [Phys. Rev. B 49, p.5828 (1994)] of evaluating total energy as a function of the amplitude of atomic displacements. The results of numerical calculations show that total energy can be expressed as a fourth-order function of the amplitude of atomic displacements in BaTi…
Sodium iridium(V) oxide, NaIrO3, was synthesized by a high pressure solid state method and recovered to ambient conditions. It is found to be isostructural with CaIrO3, the much-studied structural analogue of the high-pressure post-perovskite phase of MgSiO3. Among the oxide post-perovskites, NaIrO3 is the first example with a pentavalent cation. The structure consists of layers of corner- and edge-sharing IrO6 octahedra separated by layers of NaO8 bicapped trigonal prisms. NaIrO3 shows no magnetic ordering and resistivity measurements show non-metallic behavior. The crystal structure, electri…
Strain engineering with different substrate facets is promising for tuning functional properties of thin film perovskite oxides. By choice of facet, different surface symmetries and chemical bond directions for epitaxial interfaces can be tailored. Here, preparation of well-defined pseudo-cubic (111)-oriented orthorhombic substrates of DyScO3 , GdScO3 , and NdGaO3 is reported. The choice of orthorhombic facet, (011)o or (101)o , both corresponding to pseudo-cubic (111)pc , gives vicinal surfaces with single or double (111pc layer terrace step heights, respectively, impacting subsequent thin fi…
In transition metal perovskites (ABO3) most physical properties are tunable by structural parameters such as the rotation of the BO6 octahedra. Examples include the Néel temperature of orthoferrites, the conductivity of mixed-valence manganites, or the band gap of rare-earth scandates. Since oxides often host large internal electric dipoles and can accommodate heavy elements, they also emerge as prime candidates to display Rashba spin-orbit coupling, through which charge and spin currents may be efficiently interconverted. However, despite a few experimental reports in SrTiO3-based interface s…
Four anti-perovskite-type compounds, ZnNNi3, ZnCNi3, SnNCo3, and SnCCo3, are synthesised through reactions between ingredient metal oxides and organic compound melamine (C3H6N6). ZnNNi3 and ZnCNi3 are selectively synthesised by choosing different reaction temperatures and nominal oxide-to-melamine ratios. SnNCo3 is synthesised for the first time by this melamine method. Resistivity, magnetisation, and heat capacity measurements reveal that SnNCo3 is a correlated metal with a high density of states at the Fermi level. Our results demonstrate that this feasible synthetic route using melamine is …
We propose a device model that elucidates the role of domain walls in the photovoltaic effect in multi-domain ferroelectric perovskites. The model accounts for the intricate interplay between ferroelectric polarization, space charges, photo-generation and electronic transport. When applied to bismuth ferrite, results show a significant electric potential step across both 71-degree and 109-degree domain walls, which in turn contributes to the photovoltaic (PV) effect. We also find a strong correlation between polarization and oxygen octahedra tilts, which indicates the nontrivial role of the la…
Oxide materials exhibit several novel structural, magnetic, and electronic properties. Their stability under ambient conditions, easy synthesis, and high transition temperatures provide such systems with an ideal ground for realizing topological properties and real-life technological applications. However, experimental evidence of topological states in oxide materials is rare. In this study, we have synthesized single crystals of oxide double perovskite Sr2FeMoO6 and revealed its topological nature by investigating its structural, magnetic, and electronic properties. We observed that the syste…
The momentum-dependent Rashba and Dresselhaus spin-splitting has gained much attention for its highly promising applications in spintronics. In the present work, ab initio density functional theory calculations are performed to study the spin-splitting effect in ferroelectric oxide perovskite KIO3. Our calculations are additionally supported by symmetry adapted two-band k.p Hamiltonian. Non-negligible spin-splitting effect is observed at conduction band minimum (CBm) and valence band maximum (VBM) for rhombohedral R3m and R3c phases. Linear Rashba terms successfully explain the splitting at VB…
Mixed oxides derived from the perovskite structure by combination of A- and B-site elements and by partial substitution of oxygen provide an immense playground of physico-chemical properties. Here, we account for own research conducted at the Paul Scherrer Institute on perovskite-type oxides and oxynitrides used in electrochemical, photo(electro)chemical and catalytic processes aiming at facing energy relevant issues.
