arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1808.08301cond-mat.mtrl-sci
收藏

Rh(111)表面ZrO $_2$膜的表面结构:从两层到体终止

Surface structures of ZrO$_2$ films on Rh(111): From two layers to bulk termination

Peter Lackner, Zhiyu Zou, Sabrina Mayr, Joong-Il Jake Choi, Ulrike Diebold, Michael Schmid

摘要:

我们用扫描隧道显微镜(STM)和低能电子衍射(LEED)研究了Rh(111)衬底上2-10个单层(ML)厚度范围内的氧化锆薄膜。氧化锆的沉积使用UHV兼容的溅射源,导致在逐层生长和良好的均匀性的膜。对于2-4 ML的厚度,观察到衬底对薄膜的结构的层依赖性影响。超过此厚度,薄膜显示出(2 $\times$ 1)或扭曲(2 $\times$ 2)的表面结构相对于立方ZrO $_2$(111);这些结构分别对应于四斜晶系和单斜晶系氧化锆。在高达730 °C的退火温度下发生四斜相;在850 °C或更高的退火温度下发生向结晶稳定的单斜相的转变。高温退火也会破坏薄膜并暴露Rh(111)衬底。我们认为,四斜晶系薄膜是稳定的缺氧,而单斜晶系薄膜只有弱缺陷,并显示带弯曲的缺陷和晶界。这一观察结果与正电荷负责氧化锆基固体电解质中的晶界阻挡效应是一致的。我们的工作介绍了四斜晶系和单斜晶系5毫升厚的ZrO $_2$膜Rh(111)作为非常适合的模型系统的表面科学研究的ZrO $_2$,因为他们没有表现出较厚的膜或散装材料的充电问题,并显示出更好的均匀性和稳定性比以前研究的ZrO $_2$ /Pt(111)系统。

英文摘要:

We have studied zirconia films on a Rh(111) substrate with thicknesses in the range of 2-10 monolayers (ML) using scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED). Zirconia was deposited using a UHV-compatible sputter source, resulting in layer-by-layer growth and good uniformity of the films. For thicknesses of 2-4 ML, a layer-dependent influence of the substrate on the structure of the thin films is observed. Beyond this thickness, films show a (2 $\times$ 1) or a distorted (2 $\times$ 2) surface structure with respect to cubic ZrO$_2$(111); these structures correspond to tetragonal and monoclinic zirconia, respectively. The tetragonal phase occurs for annealing temperatures of up to 730 °C; transformation to the thermodynamically stable monoclinic phase occurs after annealing at 850 °C or above. High-temperature annealing also breaks up the films and exposes the Rh(111) substrate. We argue that the tetragonal films are stabilized by oxygen deficiency, while the monoclinic films are only weakly defective and show band bending at defects and grain boundaries. This observation is in agreement with positive charge being responsible for the grain-boundary blocking effect in zirconia-based solid electrolytes. Our work introduces the tetragonal and monoclinic 5 ML-thick ZrO$_2$ films on Rh(111) as well-suited model system for surface-science studies on ZrO$_2$ as they do not exhibit the charging problems of thicker films or the bulk material and show better homogeneity and stability than the previously-studied ZrO$_2$/Pt(111) system.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑