Layer-structured materials are often considered to be good candidates for thermoelectric materials, because they tend to exhibit intrinsically low thermal conductivity as a result of atomic interlayer interactions. The electrical properties of layer-structured materials can be easily tuned using various methods, such as band modification and intercalation. We report TiNBr, as a member of the layer-structured metal nitride halide system MNX (M = Ti, Zr, Hf; X = Cl, Br, I), and it exhibits an ultrahigh Seebeck coefficient of 2215 $μV/K$ at 300K. The value of the dimensionless figure of merit, ZT, along A axis can be as high as 0.661 at 800K, corresponding to a lattice thermal conductivity as low as 1.34 W/(m K). The low ${κ_l}$ of TiNBr is associated with a collectively low phonon group velocity ($2.05\times 10^3 $ m/s on average) and large phonon anharmonicity that can be quantified using the Grüneisen parameter and three-phonon processes. Animation of the atomic motion in highly anharmonic modes mainly involves the motion of N atoms, and the charge density difference reveals that the N atoms become polarized with the merging of anharmonicity. Moreover, the fitting procedure of the energy-displacement curve verifies that in addition to the three-phonon processes, the fourth-order anharmonic effect is also important in the integral anharmonicity of TiNBr. Our work is the first study of the thermoelectric properties of TiNBr and may help establish a connection between the low lattice thermal conductivity and the behavior of phonon vibrational modes.
The layered Bi-chalcogenide compounds have been drawing much attention as a new layered superconductor family since 2012. Due to the rich variation of crystal structure and constituent elements, the development of new physics and chemistry of the layered Bi-chalcogenide family and its applications as functional materials have been expected. Recently, it was revealed that the layered Bi chalcogenides can show a relatively high thermoelectric performance (ZT = 0.36 in LaOBiSSe at ~650 K). Here, we show the crystal structure variation of the Bi-chalcogenide family and their thermoelectric propert…
In-plane thermal conductivity of the thermoelectric layered cobalt oxides has been measured using the Harman method, in which thermal conductivity is obtained from temperature gradient induced by applied current. We have found that the charge reservoir block (the block other than the CoO$_2$ block) dominates the thermal conduction, where a nano-block integration concept is effective for material design. We have further found that the thermal conductivity shows a small but finite in-plane anisotropy between $a$ and $b$ axes, which can be ascribed to the misfit structure.
Inspired by the recent first-principles calculations showing the high thermoelectric performance of layered pnictogen chalcogenides, we experimentally characterise the crystal structure and high-temperature transport properties of the layered antimony selenides REOSbSe2 (RE = La, Ce). The crystal structure of REOSbSe2 was the tetragonal P4/nmm space group, consisting of alternate stacks of SbSe2 and REO layers. These two compounds were n-type semiconductors. The optical band gaps of LaOSbSe2 and CeOSbSe2 were evaluated to be 1.0 and 0.6 eV, respectively. The room-temperature thermal conductivi…
Layered-antiferromagnetic compound CuCrS2 has been prepared by different methods. The analysis of X-ray diffraction patterns of different samples gave significant amount of vacancy-disorder of Cr-atoms within the layers. Extended period of sintering above 9000C increases the transfer of Cr-atoms to the interstitial sites between the layers. This disorder has marginal effect on the Antiferromagnetic properties. The electrical conductivity is increased and the thermoelectric power remains positive and quite high between 150-400\muV/K in the paramagnetic state around room temperature with increas…
Thermoelectric power generation has been recognized as one of the most important technologies, and high-performance thermoelectric materials have long been pursued. However, because of the large number of candidate materials, this quest is extremely challenging, and it has become clear that a firm theoretical concept from the viewpoint of band-structure engineering is needed. In this study, we theoretically demonstrate that pnictogen-dichalcogenide layered compounds, which originally attracted attention as a family of superconductors and have recently been investigated as thermoelectric materi…
Although SbSe2-based layered compounds have been predicted to be high-performance thermoelectric materials and topological materials, most of these compounds obtained experimentally have been insulators so far. Here, we present the effect of Bi substitution on the thermoelectric properties of SbSe2-based layered compounds NdO0.8F0.2Sb1-xBixSe2 (x = 0-0.4). The room temperature electrical resistivity is decreased to 8.0 * 10^-5 ohmm for x = 0.4. The electrical power factor is calculated to be 1.4 * 10^-4 W/mK^2 at 660 K, which is in reasonable agreement with combined Jonker and Ioffe analysis. …
We predict high thermoelectric efficiency in the layered perovskite La$_2$Ti$_2$O$_7$, based on calculations (mostly ab-initio) of the electronic structure, transport coefficients, and thermal conductivity in a wide temperature range. The figure of merit $ZT$ computed with a temperature-dependent relaxation time increases monotonically from just above 1 at room temperature to over 2.5 at 1200 K, at an optimal carrier density of around 10$^{20}$ cm$^{-3}$. The Seebeck thermopower coefficient is between 200 and 300 $μ$V/K at optimal doping, but can reach nearly 1 mV/K at low doping. Much of the …
We report the synthesis and thermoelectric transport properties of As-doped layered pnictogen oxyselenides NdO0.8F0.2Sb1-xAsxSe2 (x < 0.7), which are predicted to show high-performance thermoelectric properties based on first-principles calculation. The crystal structure of these compounds belongs to the tetragonal P4/nmm space group (No. 129) at room temperature. The lattice parameter c decreases with increasing x, while a remains almost unchanged among the samples. Despite isovalent substitution of As for Sb, electrical resistivity significantly rises with increasing x. Very low thermal cond…
Nanostructured materials have emerged as an alternative to enhance the figure of merit (ZT) of thermoelectric (TE) devices. Graphene exhibits a high electrical conductivity (in-plane) that is necessary for a high ZT; however, this effect is countered by its impressive thermal conductivity. In this work TE layered devices composed of electrochemically exfoliated graphene (EEG) and a phonon blocking material such as poly (3,4-ethylenedioxythiophene)polystyrene sulfonate (PEDOT:PSS), polyaniline (PANI) and gold nanoparticles (AuNPs) at the interface were prepared. The figure of merit, ZT, of each…
We analyze the anisotropic electrical and thermal transport measurements in single crystals of In2Te5 belonging to monoclinic space group C12 c1 with the temperature gradient applied parallel and perpendicular to the crystallographic c-axis of the crystals. The thermal conductivity along the c-axis thermal conductivity parallel was found to smaller by a factor of 2 compared to the thermal conductivity along the direction perpendicular to the c-axis over the entire temperature range. In contrast, the Seebeck coefficient along the c-axis parallel was found to be higher than its value along the d…
We have investigated the systematic transport properties of the layered 112-type cobaltite LaBaCo2O5.5 by means of electrical resistivity, magnetoresistance, electroresistance and thermoelectric measurements in various conditions. In order to understand the complex conduction mechanism of LaBaCo2O5.5, the transport data have been analyzed using different theoretical models. The system shows semiconductor-semiconductor like transition (TSC) around 326K, corresponding to ferromagnetic transition and in the low temperature region resistivity data follows the Motts variable range hopping model. In…
Polycrystalline sample of the new layered superconductor Bi4O4S3 is successfully synthesized by solid-state reaction method by using Bi, S and Bi2O3 powders with one step reaction. The superconducting transition temperature (Tconset=4.5 K), the zero resistance transition temperature (Tc0=4.07 K) and the diamagnetic transition temperature (4.02 K at H=10 Oe) were confirmed by electrical transport and magnetic measurements. Also, our results indicate a typical type II-superconductor behavior. In addition, a large thermoelectric effect was observed with a dimensionless thermoelectric figure of me…
We have investigated the thermoelectric properties of the novel layered bismuth chalcogenides LaOBiS2-xSex. The partial substitution of S by Se produced the enhancement of electrical conductivity (metallic characteristics) in LaOBiS2-xSex. The power factor largely increased with increasing Se concentration. The highest power factor was 4.5 uW/cmK2 at around 470 deg. C for LaOBiS1.2Se0.8. The obtained dimensionless figure-of-merit (ZT) was 0.17 at around 470 deg. C in LaOBiS1.2Se0.8.
Stacking-dependent thermoelectric transport in layered Sc_2Si_2Te_6 from first principles
Key Laboratory of Advanced Materials and Devices for Post-Moore Chips, Ministry of Education, University of Science and Technology Beijing（教育部先进后摩尔芯片器件重点实验室，北京科技大学）；School of Mathematics and Physics, University of Science and Technology Beijing（北京科技大学数理学院）
High-Tc Cu oxides consist of the alternating stack of the superconductive CuO2 layer and the block layer, such as Bi2Sr2O4 or La2-xSrxO2. By changing the block layer, we can change their physical properties, such as transition temperature Tc. The thermoelectric Co oxides have a similar layered structure composed of the conductive CoO2 layer and the blocking layer. Thus, we propose that their thremoelectric properties can be finely tuned by modifying the block layer.
Lead and tin chalcogenides have been studied widely due to their promising thermoelectric (TE) properties. Further enhancement in their TE efficiency has been reported upon the reduction of the dimension, which is an important feature in modern device fabrications. Using density functional theory combined with the Semi-classical Boltzmann transport theory, we studied the structural, electronic and TE properties of two-dimensional (2D) MX (M = Sn, Pb; X = S, Te) monolayers. Spin-orbit coupling was found to have significant effects on their electronic structure, particularly for the heavy compou…
Current thermoelectric (TE) materials often have low performance or contain less abundant and/or toxic elements, thus limiting their large-scale applications. Therefore, new TE materials with high efficiency and low cost are strongly desirable. Here we demonstrate that, SiS and SiSe monolayers made from non-toxic and earth-abundant elements intrinsically have low thermal conductivities arising from their low-frequency optical phonon branches with large overlaps with acoustic phonon modes, which is similar to the state-of-the-art experimentally demonstrated material SnSe with a layered structur…
In the present study, the structural, electronic, optical and thermoelectric properties of two isostructural chalcogenide materials, NaInS2 and NaInSe2 with hexagonal symmetry (R-3m) have been studied using the first principles method. A very good agreement has been found between our results with the available experimental and theoretical ones. The studied materials are semiconducting in nature as confirmed from the electronic band structure and optical properties.The strong hybridizations among s orbitals of Na, In and Se atoms push the bottom of the conduction band downward resulting in a na…
Identifying Highly Deformable van der Waals Layered Chalcogenides with Superior Thermoelectric Performance Using Deformability Factors and Interpretable Machine Learning
In topological n-type thermoelectrics based on $Bi_{2}Te_{3}$ with atomic substitutions Bi $\rightarrow$ In, Te $\rightarrow$ Se, S, the morphology and the surface states of Dirac fermions on the interlayer (0001) surface of van der Waals were studied by scanning tunneling microscopy and spectroscopy (STM/STS) techniques. By the STM method, the dark and light spots on the surface were found, which intensities depend on the composition and thermoelectric properties of solid solutions. The observed surface morphology features in the solid solutions are explained by distortions of surface electro…
Using muon spin spectroscopy we have found that, for both Na$_x$CoO$_2$ (0.6 $\leq x \leq$ 0.9) and 3- and 4-layer cobaltites, a common low temperature magnetic state (which in some cases is manifest as an incommensurate spin density wave) forms in the CoO$_2$ planes. Here we summarize those results and report a dome-shaped relation between the transition temperature into the low-$T$ magnetic state and the composition $x$ for Na$_x$CoO$_2$ and/or the high-temperature asymptotic limit of thermopower in the more complex 3- and 4-layer cobaltites. This behavior is explained using the Hubbard mode…
Doping is considered to be the main method for improving the thermoelectric performance of layered sodium cobaltate (Na$_{1-x}$CoO$_2$). However, in the vast majority of past reports, the equilibrium location of the dopant in the Na$_{1-x}$CoO$_2$'s complex layered lattice has not been confidently identified. Consequently, a universal strategy for choosing a suitable dopant for enhancing Na$_{1-x}$CoO$_2$'s figure of merit is yet to be established. Here, by examining the formation energy of Gd and Yb dopants in Na$_{0.75}$CoO$_2$ and Na$_{0.50}$CoO$_2$, we demonstrate that in an oxygen poor en…
Thermoelectric materials enables the harvest of waste heat and directly conversion into electricity. In search of high efficient thermoelectric materials, low thermal conductivity of a material is essential and critical. Here, we have theoretically investigated the lattice thermal conductivity and thermoelectric properties of layered intermetallic Na$_2$MgSn and Na$_2$MgPb based on the density functional theory and linearized Boltzmann equation with the single-mode relaxation-time approximation. It is found that both materials exhibit very low and anisotropic intrinsic lattice thermal conducti…
Confined electrons in low dimensions host desirable material functions for downscaled electronics as well as advanced energy technologies. Thermoelectricity is a most fascinating example, since the dimensionality modifies the electron density of states dramatically, leading to enhanced thermopower as experimentally examined in artificial two-dimensional (2D) structures. However, it is still an open question whether such an enhanced thermopower in low dimensions is realized in layered materials with strong 2D characters such as cuprates. Here, we report unusual enhancement of the thermopower in…
A positive muon spin rotation and relaxation ($μ^+$SR) experiment on [Ca$_2$CoO$_3$]$_{0.62}$[CoO$_2$], ({\sl i.e.}, Ca$_3$Co$_4$O$_9$, a layered thermoelectric cobaltite) indicates the existence of two magnetic transitions at $\sim$ 100 K and 400 - 600 K; the former is a transition from a paramagnetic state to an incommensurate ({\sf IC}) spin density wave ({\sf SDW}) state. The anisotropic behavior of zero-field $μ^+$SR spectra at 5 K suggests that the {\sf IC-SDW} propagates in the $a$-$b$ plane, with oscillating moments directed along the c-axis; also the {\sf IC-SDW} is found to exist not…
MoTe2 is a rare transition-metal ditelluride having two kinds of layered polytypes, hexagonal structure with trigonal prismatic Mo coordination and monoclinic structure with octahedral Mo coordination. The monoclinic distortion in the latter is caused by anisotropic metal-metal bonding. In this work, we have examined the Nb doping effect on both polytypes of MoTe2 and clarified a structural phase diagram for Mo1-xNbxTe2 containing four kinds of polytypes. A rhombohedral polytype crystallizing in polar space group has been newly identified as a high-temperature metastable phase at slightly Nb-r…
High performance thermoelectric devices requires materials with low lattice thermal conductivities. Many strategies, such as phonon engineering, have been made to reduce lattice thermal conductivity without simultaneously decrease of the charge transport performance. It is a simple and effective approach to use materials with heavy element to reduce the lattice thermal conductivity. Here, based on the first-principles calculations and phonon Boltzmann transport equations, we find the replacement of Zr with heavy element Hf in ZrNCl doesn't reduce the lattice thermal conductivity, instead, it s…
We have examined an isovalent Rh substitution effect on the transport properties of the thermoelectric oxide Ca$_3$Co$_{4}$O$_9$ using single-crystalline form. With increasing Rh content $x$, both the electrical resistivity and the Seebeck coefficient change systematically up to $x=0.6$ for Ca$_3$Co$_{4-x}$Rh$_{x}$O$_9$ samples. In the Fermi-liquid regime where the resistivity behaves as $ρ=ρ_0+AT^2$ around 120 K, the $A$ value decreases with increasing Rh content, indicating that the correlation effect is weakened by Rh $4d$ electrons with extended orbitals. We find that, in contrast to such …
It was generally assumed that weak van der Waals interactions exist between neighboring layers in the two-dimensional group-IV chalcogenides. Using PbSe as a prototypal example, however, we find additional strong coupling between the Pb-Pb layers, as evidenced by detailed analysis of the differential charge density. The coupling resembles covalent-like bond and exhibits strong harmonicity around the equilibrium distance, which can be fine tuned to obviously reduce the phonon thermal conductivity but slightly change the electronic transport of PbSe. As a consequence, a maximum ZT value of 2.5 c…
Synchrotron-based angle-resolved photoemission spectroscopy is used to determine the electronic structure of layered SnSe, which was recently turned out to be a potential thermoelectric material. We observe that the top of the valence band consists of two nearly independent hole bands, whose tops differ by ~20 meV in energy, indicating the necessity of a multivalley model to describe the thermoelectric properties. The estimated effective masses are anisotropic, with in-plane values of 0.16-0.39 m$_0$ and an out-of-plane value of 0.71 m$_0$, where m$_0$ is the rest electron mass. Information of…
Since 2014 the layered semiconductor SnSe in the high-temperature Cmcm phase is known to be the most efficient thermoelectric material. Making use of first-principles calculations we show that its vibrational and thermal transport properties are determined by huge non-perturbative anharmonic effects. We show that the transition from the Cmcm phase to the low-symmetry Pnma is a second-order phase transition driven by the collapse of a zone border phonon, whose frequency vanishes at the transition temperature. Our calculations show that the spectral function of the in-plane vibrational modes are…
Sodium cobaltate with high Na content is a promising thermoelectric material. It has recently been reported that oxygen vacancies can alter the material properties, reducing its figure of merit. However, experimental data concerning the oxygen stoichiometry are contradictory. We therefore studied the formation of oxygen vacancies in Na_xCoO_2 with first principles calculations, focusing on x = 0.75. We show that a very low oxygen vacancy concentration is expected at the temperatures and partial pressures relevant for applications.
The electronic properties of the layered black phosphorus (black-P) and its monolayer counterpart phosphorene are investigated by using the first-principles calculations based on the density functional theory (DFT). The room-temperature electronic transport coefficients are evaluated within the semi-classical Boltzmann theory. The electrical conductivity exhibits anisotropic behavior while the Seebeck coefficient is almost isotropic. At the optimal doping level and room temperature, bulk black-P and phosphorene are found to have large thermoelectric power factors of 118.4 and 138.9 μWcm-1K-2, …
Magnetism of a misfit layered cobaltite [Ca$_2$Co$_{4/3}$Cu$_{2/3}$O$_4$]$_x^{\rm RS}$[CoO$_2$] ($x \sim$ 0.62, RS denotes a rocksalt-type block) was investigated by a positive muon spin rotation and relaxation ($μ^+$SR) experiment. A transition to an incommensurate ({\sf IC}) spin density wave ({\sf SDW}) state was found below 180 K (= $T_{\rm C}^{\rm on}$); and a clear oscillation due to a static internal magnetic field was observed below 140 K (= $T_{\rm C}$). Furthermore, an anisotropic behavior of the zero-field $μ^+$SR experiment indicated that the {\sf IC-SDW} propagates in the $a$-$b$ …
The group IV-VI compound SnSe, with an orthorhombic lattice structure, has recently attracted particular interest due to its unexpectedly low thermal conductivity and high power factor, showing great promise for thermoelectric applications. SnSe displays intriguing anisotropic properties due to the puckered low-symmetry in-plane lattice structure. Low-dimensional materials have potential advantages in improving the efficiency of thermoelectric conversion, due to the increased power factor and decreased thermal conductivity. A complete study of the optical and electrical anisotropies of SnSe na…
Terahertz (THz) radiation is a powerful tool with widespread applications ranging from imaging, sensing, and broadband communications to spectroscopy and nonlinear control of materials. Future progress in THz technology depends on the development of efficient, structurally simple THz emitters that can be implemented in advanced miniaturized devices. Here we show how the natural electronic anisotropy of layered conducting transition metal oxides enables the generation of intense terahertz radiation via the transverse thermoelectric effect. In thin films grown on offcut substrates, femtosecond l…
Low-dimensional layered materials have attracted tremendous attentions due to their wide range of physical and chemical properties and potential applications in electronic devices. Using first-principles method taking into account the quasiparticle self-energy correction and Boltzmann transport theory, the electronic transport properties of ZrSe3 monolayer are investigated, where the carrier relaxation time is accurately calculated within the framework of electron-phonon coupling. It is demonstrated that the high power factor of the monolayer can be attributed to the grooved bands near the con…
We investigated the in-plane anisotropy on the resistivity and thermopower of Bi2-xPbxSr2Co2Oy single crystals, which have a misfit structure between the hexagonal CoO2 layer and the rock salt Bi2Sr2O4 layer. The resistivity and thermopower show significantly large anisotropy, which exceeds two at maximum. This anisotropy would come from the anisotropic pseudogap formation enhanced by the misfit structure. The thermopower changes with Pb doping to take a maximum at x=0.4. The misfit structure improves the thermoelectric properties through chemical pressure. The power factor is as large as 9 mu…
In this study, we perform a comparative theoretical study on the thermoelectric performance of materials with Cu$Ch_4$ ($Ch=$ S, Se) tetrahedra, including famous thermoelectric materials BiCuSeO and tetrahedrite Cu$_{12}$Sb$_4$S$_{13}$, by means of first-principles calculations. By comparing these electronic band structures, we find that many of these materials possess a Cu-$t_{2g}$ band structure consisting of quasi-one-dimensional band dispersions and the isotropic (two-dimensional for layered compounds) band dispersion near the valence-band edge. Therefore, the key factors for the thermoele…
In this work, we expand the set of known layered compounds to include ionic layered materials, which are well known for superconducting, thermoelectric, and battery applications. Focusing on known ternary compounds from the ICSD, we screen for ionic layered structures by expanding upon our previously developed algorithm for identification of van der Waals (vdW) layered structures, thus identifying over 1,500 ionic layered compounds. Since vdW layered structures can be chemically mutated to form ionic layered structures, we have developed a methodology to structurally link binary vdW to ternary…
We study the thermoelectric properties of bulk $MoSe_2$ within relaxation time approximation including electron-phonon and ionized impurity interactions using first-principles calculations at room temperatures. The anisotropy of this two-dimensional layered metal dichalcogenide is studied by calculations of electron mobility in the cross-plane and the in-plane directions. We show that the cross-plane mobility is two orders of magnitude smaller than the in-plane one. The inclusion of van der Waals interactions further lowers the carrier mobility in the cross-plane direction but minimally affect…
Ternary chalcogenides have been of recent investigation for applications in photovoltaic and thermoelectric devices. We study the structural, electronic, optical, and thermoelectric properties of nine ternary chalcogenides, NaAX$_{2}$, where A represents pnictogens (As, Sb, and Te) and X represents chalcogens (S, Se, and Te). Calculations based on density functional theory yield the following results: (i) phonon dispersion curves predict three of the compounds, NaAsS$_{2}$, NaSbS$_{2}$, and NaSbSe$_{2}$, to be dynamically stable in the monoclinic, C2/c, structure, (ii) the layered atomistic co…
Theoretical analysis of the effect of thermoelectric phenomena on the relation of effective electrical and thermal conductivity in the macroscopically inhomogeneous media is carried out. Plane-layered structures, two-dimensional self-dual and three-dimensional randomly inhomogeneous media are examined. It is shown that the relation of effective electrical to thermal conductivity, which is independent of concentration in so-called Wiedemann-Franz media, in the case of high values of internal thermoelectric figure of merit can be considerably different from the one for the local values in each p…
Layered materials span a very broad range of solids ranging from van der Waals materials to highly complex crystal structures such as clays. They are commonly believed to have highly anisotropic properties, which is essentially attributed to weak interlayer interactions. The layered Mg3Sb2 structure is currently being intensely scrutinized due to its outstanding thermoelectric properties. Based on quantitative chemical bonding analysis we unravel that Mg3Sb2 exhibits a nearly isotropic three-dimensional (3D) bonding network with the interlayer and intralayer bonds being surprisingly similar, a…
LaOBiPbS$_3$ is a kind of pnictogen-dichalcogenide layered compounds, which have recently been experimentally investigated as thermoelectric materials owing to their low thermal conductivity and high controllability of constituent elements. However, thermoelectric performance of LaOBiPbS$_3$ is at present not very high and that of its analogous compounds remains to be unknown. In this study, we theoretically investigate thermoelectric properties of 24 possible variations of the constituent elements in LaOBiPbS$_3$ from the viewpoint of the electronic structure. We find that some compounds can …
SnSe is a layered material that currently holds the record for bulk thermoelectric efficiency. The primary determinant of this high efficiency is thought to be the anomalously low thermal conductivity resulting from strong anharmonic coupling within the phonon system. Here we show that the nature of the carrier system in SnSe is also determined by strong coupling to phonons by directly visualizing polaron formation in the material. We employ ultrafast electron diffraction and diffuse scattering to track the response of phonons in both momentum and time to the photodoping of free carriers acros…
In this work, we performed temperature-dependent Raman spectroscopy studies on three layered metal thiophosphates: CuInP2S6, CuCrP2S6, and CuInP2S6-In4/3P2S6 heterostructures. These materials are emerging multiferroics, with CuInP2S6 and CuInP2S6-In4/3P2S6 exhibiting room temperature ferrielectric polarization while CuCrP2S6 is both anti-ferroelectric and antiferromagnetic at low temperatures (<145 and <30 K, respectively). We studied two prominent peaks in the Raman spectra of these compounds, namely their P-P and P-S stretching modes. First order linear fits to the mode softening yielded coe…
Among layered oxygen-containing compounds, BiCuSeO is one of the most promising candidates for thermoelectric applications due to its intrinsically low thermal conductivity and good thermal stability. However, the rather poor electrical conductivity of pristine BiCuSeO hinders its potential. Further enhancement of the thermoelectric performance by single doping at Bi site is limited mainly due to dramatic decrease of carrier mobility. Thus, new strategies, such as dual doping or doping with variable-valence elements seem to be promising. Along with that, the development of a fast and scalable …
Ternary chalcogenides, having large crystalline unit cell and van der Waal stacking of layers, are expected to be poor thermal conductors and good thermoelectric (TE) materials. We are reporting that layered Bi4GeTe7, with alternating quintuplet-septuplet layers of Bi2Te3 and Bi2GeTe4, has an ultralow thermal conductivity, \k{appa}total 0.42 Wm-1K-1 because of high degree of anharmonicity as estimated from large Gruneisen parameter (γ 4.07) and low Debye temperature (θd 135 K). The electron dominated charge transport has been realized from the Seebeck coefficient, S - 82 uV/K, at 380 K, and Ha…
We have investigated the physical properties of a new layered oxyselenide Bi$_{2}$YO$_{4}$Cu$_{2}$Se$_{2}$, which crystallizes in an unusual intergrowth structure with Cu$_{2}$Se$_{2}$ and Bi$_{2}$YO$_{4}$ layers. Electric transport measurement indicates that Bi$_{2}$YO$_{4}$Cu$_{2}$Se$_{2}$ behaves metallic. Thermal transport and Hall measurements show that the type of the carriers is hole-like and it may be a potential thermoelectric material at high temperatures. First principle calculations are in agreement with experimental results and show that Bi$_{2}$YO$_{4}$Cu$_{2}$Se$_{2}$ is a quasi…
Thermoelectric properties of the system La$_2$NiO$_{4+δ}$ have been studied ab initio. Large Seebeck coefficient values are predicted for the parent compound, and to some extent remain in the hole-doped metallic phase, accompanied of an increase in the conductivity. This system, due to its layered structure would be a suitable candidate for an improvement of its thermoelectric figure of merit by nanostructurization in thin films, that has already been shown to increase the electrical conductivity ($σ$). Our calculations show that in the region around La$_2$NiO$_{4.05}$ the system has a large t…
Recent advances in two-dimensional (2D) crystals make it possible to realize an ideal interface structure that is required for device applications. Specifically, a p-n junction made of 2D crystals is predicted to exhibit an atomically well-defined interface that will lead to high device performance. Using angle-resolved photoemission spectroscopy, a simple surface treatment was shown to allow the possible formation of such an interface. Ta adsorption on the surface of a p-doped SnSe shifts the valence band maximum towards higher binding energy due to the charge transfer from Ta to SnSe that is…
