We present a multimodal non-linear optical (NLO) laser-scanning microscope, based on a compact fiber-format excitation laser and integrating coherent anti-Stokes Raman scattering (CARS), stimulated Raman scattering (SRS) and two-photon-excitation fluorescence (TPEF) on a single platform. We demonstrate its capabilities in simultaneously acquiring CARS and SRS images of a blend of 6-μm poly(methyl methacrylate) beads and 3-μm polystyrene beads. We then apply it to visualize cell walls and chloroplast of an unprocessed fresh leaf of Elodea aquatic plant via SRS and TPEF modalities, respectively. The presented NLO microscope, developed in house using off-the-shelf components, offers full accessibility to the optical path and ensures its easy re-configurability and flexibility.
We report on the 3-dimensional imaging of biological cells including living neurons by a recently developed fibered interferometric Scanning Optical Microscope. The topography and surface structure of mouse fibroblasts and hippocampal neurons are clearly revealed. This straightforward technique allows fast, high resolution observation of samples in liquids without lengthy alignment procedures or costly components.
We have developed a system for tapered fiber measurements of optomechanical resonators inside a dilution refrigerator, which is compatible with both on- and off-chip devices. Our apparatus features full three-dimensional control of the taper-resonator coupling conditions enabling critical coupling, with an overall fiber transmission efficiency of up to 70%. Notably, our design incorporates an optical microscope system consisting of a coherent bundle of 37,000 optical fibers for real-time imaging of the experiment at a resolution of $\sim$1 $μ$m. We present cryogenic optical and optomechanical …
We describe a two-color pump-probe scanning magneto-optical Kerr effect (MOKE) microscope which we have developed to investigate electron spin phenomena in semiconductors at cryogenic temperatures with picosecond time and micrometer spatial resolution. The key innovation of our microscope is the usage of an ultrafast `white light' supercontinuum fiber-laser source which provides access to the whole visible and near-infrared spectral range. Our Kerr microscope allows for the independent selection of the excitation and detection energy while avoiding the necessity to synchronize the pulse trains…
We experimentally determine tensile force-elongation diagrams of tapered optical fibers with a nanofiber waist. The tapered optical fibers are produced from standard silica optical fibers using a heat and pull process. Both, the force-elongation data and scanning electron microscope images of the rupture points indicate a brittle material. Despite the small waist radii of only a few hundred nanometers, our experimental data can be fully explained by a nonlinear stress-strain model that relies on material properties of macroscopic silica optical fibers. This is an important asset when it comes …
We theoretically study the problem of detecting dipole radiation in an optical system of high numerical aperture in which the detector is sensitive to \textit{field amplitude}. In particular, we model the phase sensitive detector as a single-mode cylindrical optical fiber. We find that the maximum in collection efficiency of the dipole radiation does not coincide with the optimum resolution for the light gathering instrument. The calculated results are important for analyzing fiber-based confocal microscope performance in fluorescence and spectroscopic studies of single molecules and/or quantu…
We show that the output mode of a single-mode optical fiber can be directly focused to a sub-wavelength waist with a finite working distance by tapering the fiber to a diameter of the order of the wavelength and terminating it with a spherically/hemispherically shaped tip. Numerical simulations show that a beam waist with a width of as small as 0.62λcan be formed. We fabricate micro-lensed fibers and construct a probe-scanning confocal reflection microscope. Measurements on gold nano-particles show a spatial profile with a width of 0.29λfor λ= 850 nm, which is in good agreement with the numeri…
We describe a method to map the standing-wave pattern inside a Fabry-Perot optical cavity with sub-wavelength resolution by perturbing it with a commercially available scanning near-field optical microscope (SNOM) tip. The method is applied to a fiber Fabry-Perot microcavity. We demonstrate its use to determine the relative position of the antinodes at two different wavelengths. In addition, we use the SNOM tip as a point-like source allowing precise positioning of a microscope objective with respect to the cavity mode.
We present the design and operation of a fiber-based cryogenic confocal microscope. It is designed as a compact cold-finger that fits inside the bore of a superconducting magnet, and which is a modular unit that can be easily swapped between use in a dilution refrigerator and other cryostats. We aimed at application in quantum optical experiments with electron spins in semiconductors and the design has been optimized for driving with, and detection of optical fields with well-defined polarizations. This was implemented with optical access via a polarization maintaining fiber together with Voig…
We demonstrated a simple and reliable technique of coupling diamond nanocrystal containing NV center to tapered optical fiber. We carefully studied fluorescence of the fiber itself and were able to suppress it to the level lower than single photon emission from the NV center. Single photon statistics was demonstrated at the fiber end as well as up to 3 times improvement in collection efficiency with respect to our confocal microscope
Spectroscopic stimulated Raman scattering (SRS) imaging has become a useful tool finding a broad range of applications. Yet, wider adoption is hindered by the bulky and environmentally-sensitive solid-state optical parametric oscillator (OPO) in current SRS microscope. Moreover, chemically-informative multi-window SRS imaging across C-H, C-D and fingerprint Raman regions is challenging due to the slow wavelength tuning speed of the solid-state OPO. In this work, we present a multi-window SRS imaging system based on a compact and robust fiber laser with rapid and widely tuning capability. To ad…
Digital micromirror device (DMD) serves in a significant part of computational optical setups as a means of encoding an image by the desired pattern. The most prominent is its usage in the so-called single-pixel camera experiment. This experiment often requires an efficient and homogenous collection of light from a relatively large chip on a small area of an optical fiber or spectrometer slit. Moreover, this effort is complicated by the fact that the DMD acts as a diffractive element, which causes severe spectral inhomogeneities in the light collection. We studied the effect of light diffracti…
In the paper, we propose the new technology for mass production of the photonic crystal devices and all-optical integrated circuits. We carry out the brief analysis of positive and negative sides paying attention to recent advances in silicon fibers fabrication which is crucial moment in the proposed technology.
We propose a new method for mass production of the photonic crystal devices on the basis of widely-known and well-developed technology such as microstructured optical fibers. In this paper, we investigate the optical properties of side-excited microstructured optical fiber and discuss the conditions for utilization such a structure as a planar photonic crystal device, namely, the high-quality resonance filter.
Soliton fusion is a fascinating and delicate phenomenon that manifests itself in optical fibers in case of interaction between co-propagating solitons with small temporal and wavelengths separation. We show that the mechanism of acceleration of trailing soliton by dispersive waves radiated from the preceding one provides necessary conditions for soliton fusion at the advanced stage of supercontinuum generation in photonic crystal fibers. As a result of fusion large intensity robust light structures arise and propagate over significant distances. In presence of small random noise the delicate c…
We developed a multifocus optical-resolution photoacoustic microscope (MPAM) with extended depth of field (DoF) by using a tunable acoustic gradient (TAG) lens and a pulse delay method. TAG lens is designed to control the divergence angle of the laser beam. Three fibers with different length are used to output three laser pulses with different delay time. By controlling the fire time of the laser pulses, we can get three focal spot through TAG lens in our system in one A-line data acquisition. The DoF of MPAM measured using a vertically tilted carbon fiber is about 775 micrometers. The lateral…
A novel method for automated assessment of directions of collagen fibers in soft tissues is presented. It is based on multiple rotated images obtained via polarized light microscope with perpendicular and inclined polarizers and thus it breaks the limitation of 90° periodicity of polarized light intensity and evaluates the fiber orientation over the whole 180° range accurately and quickly. After having verified the method, we used histological specimens of porcine Achilles tendon and aorta to validate the proposed algorithm and to lower the number of rotated images needed for evaluation. Our a…
A femtosecond frequency-doubled Erbium-doped fiber laser with adjustable pulse repetition rate is developed and applied in two-photon excited fluorescence microscopy. The all-fiber laser system provides the fundamental pulse at 1560 nm wavelength with 22 fs duration for the second harmonic generation, resulting in 1.35 nJ, 60 fs pulses at 780 nm. The repetition rate is adjusted by a pulse picker unit built-in within the amplifier chain, directly providing transform-limited pulses for any chosen repetition rate between 1 and 12 MHz. We employed the laser source to drive a scanning two-photon ex…
Fiber photometry permits monitoring fluorescent indicators of neural activity in behaving animals. Optical fibers are typically used to excite and collect fluorescence from genetically-encoded calcium indicators expressed by a subset of neurons in a circuit of interest. However, a quantitative understanding of the brain volumes from which signal is collected and how this depends on the properties of the optical fibers are lacking. Here we analytically model and experimentally measure the light emission and collection fields for optical fibers in solution and scattering tissue, providing a comp…
We review our recent progress in the production and characterization of tapered optical fibers with a sub-wavelength diameter waist. Such fibers exhibit a pronounced evanescent field and are therefore a useful tool for highly sensitive evanescent wave spectroscopy of adsorbates on the fiber waist or of the medium surrounding. We use a carefully designed flame pulling process that allows us to realize preset fiber diameter profiles. In order to determine the waist diameter and to verify the fiber profile, we employ scanning electron microscope measurements and a novel accurate in situ optical m…
The red shifted solitonic resonant radiation is a fascinating phase matching phenomenon that occurs when an optical pulse, launched in the normal dispersion regime of photonic crystal fiber, radiates across the zero dispersion wavelength. The formation of such phase-matched radiation is independent of the generation of any optical soliton and mainly governed by the leading edge of input pump which forms a shock front. The radiation is generated at the anomalous dispersion regime and found to be confined both in time and frequency domain. We experimentally investigate the formation of such radi…
We analyze the impact of geometrical parameters on such important optical characteristics of negative curvature hollow-core fibers (NCHCFs) as waveguide dispersion, waveguide losses and the structure of transmission bands. We consider both theoretically and experimentally the resonance effects and formation of band edges under bending in NCHCFs.
The formation of coherent structures in noise driven phenomena and in Turbulence is a complex and fundamental question. A particulary important structure is the so-called Rogue Wave (RW) that arises as the sudden appearance of a localized and giant peak. First studied in Oceanography, RWs have been extensively investigated in Optics since 2007, in particular in optical fibers experiments on supercontinua and optical turbulence. However the typical time scales underlying the random dynamics in those experiments prevented --up to now-- the direct observation of isolated RWs. Here we report on th…
Optical fibers are the basis for applications that have grown considerably in recent years (telecommunications, sensors, fiber lasers, etc). Despite undeniable successes, it is necessary to develop new generations of amplifying optical fibers that will overcome some limitations typical of silica glass. In this sense, the amplifying Transparent Glass Ceramics (TGC), and particularly the fibers based on this technology, open new perspectives that combine the mechanical and chemical properties of a glass host with the augmented spectroscopic properties of embedded nanoparticles. This paper is an …
We report results of numerical simulations on the multiple soliton generation and soliton energy quantization in a soliton fiber ring laser passively mode-locked by using the nonlinear polarization rotation technique. We found numerically that the formation of multiple solitons in the laser is caused by a peak power limiting effect of the laser cavity. It is also the same effect that suppresses the soliton pulse collapse, an intrinsic feature of solitons propagating in the gain media, and makes the solitons stable in the laser. Furthermore, we show that the soliton energy quantization observed…
We present a novel design that exploits the focusing properties of scattering media to increase the resolution and the working distance of multimode fiber based imaging devices. Placing a highly scattering medium in front of the distal tip of the multimode fiber enables the formation of smaller sized foci at increased working distances away from the fiber tip. We perform a parametric study of the effect of the working distance and the separation between the fiber and the scattering medium on the focus size. We experimentally demonstrate submicron focused spots as far away as 800μm with 532nm l…
We experimentally observe soliton self-organization and pulsation in a passively mode-locked fiber laser. The optomechanical interaction in the optical fiber is key to the formation of equidistant soliton bunches. These solitons simultaneously undergo a pulsation process with a period corresponding to tens of the cavity round trip time. Using the dispersive Fourier transformation technique, we find that the Kelly sidebands in the shot-to-shot spectra appear periodically, synchronizing with the pulsation.
We investigate the effects of two dimensional confinement on the lasing properties of a classical random laser system operating in the incoherent feedback (diffusive) regime. A suspension of 250nm rutile (TiO2) particles in a Rhodamine 6G solution was inserted into the hollow core of a photonic crystal fiber (PCF) generating the first random fiber laser and a novel quasi-one-dimensional RL geometry. Comparison with similar systems in bulk format shows that the random fiber laser presents an efficiency that is at least two orders of magnitude higher.
Fiber fuse effect can occur spontaneously and propagate along optical fibers to cause wide-spread damage; it threatens all applications involving optical fibers. This paper presents two results. First, it establishes that the initiation of fiber fuse (IFF) in silica fibers is caused by defect-induced absorption. Critical temperatures and critical optical powers for IFF are simulated for the first time using a 3D solid-state heat transfer model with heat source generated by defect-induced absorption. In this method, formation energies of the defects can be uniquely determined, which offers crit…
Université Bourgogne Europe, CNRS（勃艮第欧洲大学）；University of Calabria（卡拉布里亚大学）；University of Limoges, CNRS（利摩日大学）；Niccolò Cusano University（尼古拉·库萨诺大学）；Sapienza Universit‘a di Roma（罗马第一大学）
Photonic crystal fibers doped with silver nanoparticles exhibit the Kerr nonlinearity that can be positive or negative depending on wavelength and vanishes at a specific wavelength. We study numerically how the simultaneous presence of a zero-nonlinearity wavelength (ZNW) and a zero-dispersion wavelength affects evolution of soliton and supercontinuum generation inside such fibers and find a number of unique features. The existence of negative nonlinearity allows soliton formation even in the normaldispersion region of the fiber, and the ZNW acts as a barrier for the Raman-induced red shift of…
We investigate the high-frequency timing jitter spectral density of mode-locked fiber lasers in different mode-locked regimes. Quantum noise-limited timing jitter spectra of mode-locked-regime-switchable Yb fiber lasers are measured up to the Nyquist frequency with sub-100 as resolution. The integrated rms timing jitter of soliton, stretched-pulse, and self-similar Yb fiber lasers is measured to be 1.8 fs, 1.1 fs, and 2.9 fs, respectively, when integrated from 10 kHz to 40 MHz. The distinct behavior of jitter spectral density related to pulse formation mechanisms is revealed experimentally for…
Recently, in addition to exploring the application of new saturable absorber devices in fiber lasers, soliton dynamics has also become a focus of current research. In this article, we report an ultrashort pulse fiber laser based on VSe2/GO nanocomposite and verify the formation process of soliton and soliton molecules by the numerical simulation. The prepared VSe2/GO-based device shows excellent saturable absorption characteristics with a modulation depth of 14.3% and a saturation absorption intensity of 0.93MW/cm2. The conventional soliton is obtained with pulse width of 573fs, which is curre…
Atoms ionization by the simultaneous absorption of multiple photons has found applications in fiber optics, where it leads to unique nonlinear phenomena. To date, studies of the ionization regime have been limited to gas-filled hollow-core fibers. Here, we investigate multiphoton ionization of standard optical fibers, where intense laser pulses ionize the atoms constituting the fiber structure itself, instead of that of the filling gas. We characterize material modifications produced by optical breakdown. Their formation affects laser beam dynamics over hours long temporal scales. The damage f…
Optical frequency combs generated in normally dispersive Kerr microresonators have been observed to correspond to dark temporal structures, and theoretically explained as interlocked switching waves (also known as domain walls or fronts). The time-domain dynamics that underpin the formation of this type of frequency combs has however so far eluded direct experimental observation. Here we use a closely related system - a synchronously driven optical fibre ring resonator - to experimentally study the dynamics of deterministically excited switching waves. We measure the switching wave velocities …
Duke University（杜克大学）；Y Combinator Research（Y Combinator 研究院）；Charité–Universitätsmedizin Berlin（柏林夏里特医学院）；Humboldt University（柏林洪堡大学）
Deep learning algorithms offer a powerful means to automatically analyze the content of medical images. However, many biological samples of interest are primarily transparent to visible light and contain features that are difficult to resolve with a standard optical microscope. Here, we use a convolutional neural network (CNN) not only to classify images, but also to optimize the physical layout of the imaging device itself. We increase the classification accuracy of a microscope's recorded images by merging an optical model of image formation into the pipeline of a CNN. The resulting network …
High-speed tracking of single particles is a gateway to understanding physical, chemical, and biological processes at the nanoscale. It is also a major experimental challenge, particularly for small, nanometer-scale particles. Although methods such as confocal or fluorescence microscopy offer both high spatial resolution and high signal-to-background ratios, the fluorescence emission lifetime limits the measurement speed, while photobleaching and thermal diffusion limit the duration of measurements. Here we present a tracking method based on elastic light scattering that enables long-duration …
Dual-comb lasers from which asynchronous ultrashort pulses can be simultaneously generated have recently become an interesting research subject. They could be an intriguing alternative to the current dual-laser optical-frequency-comb source with highly sophisticated electronic control systems. If generated through a common light path traveled by all pulses, the common-mode noises between the spectral lines of different pulse trains could be significantly reduced. Therefore, coherent dual-comb generation from a completely common-path, unidirectional lasing cavity would be an interesting territo…
We report on the observation of dispersion-managed (DM) dark soliton emission in a net-normal dispersion erbium-doped fiber laser. We found experimentally that dispersion management could not only reduce the pump threshold for the dark soliton formation in a fiber laser, but also stabilize the single dark soliton evolution in the cavity. Numerical simulations have also confirmed the DM dark soliton formation in a fiber laser.
We present a robust, fiber based endoscope with a silver direct-laser-written (DLW) structure for radio frequency (RF) emission next to the optical fiber facet. Thereby, we are able to excite and probe a sample, such as nitrogen vacancy (NV) centers in diamond, with RF and optical signals simultaneously and specifically measure the fluorescence of the sample fully through the fiber. At our targeted frequency-range around 2.9 GHz the facet of the fiber-core is in the near-field of the RF-guiding silver-structure, which comes with the advantage of an optimal RF-intensity decreasing rapidly with …
We report on the dark pulse emission of an all-normal dispersion erbium-doped fiber laser with a polarizer in cavity. We found experimentally that apart from the bright pulse emission, under appropriate conditions the fiber laser could also emit single or multiple dark pulses. Based on numerical simulations we interpret the dark pulse formation in the laser as a result of dark soliton shaping.
We propose efficient modelling of optical fiber channel via NLSE-constrained physics-informed neural operator without reference solutions. This method can be easily scalable for distance, sequence length, launch power, and signal formats, and is implemented for ultra-fast simulations of 16-QAM signal transmission with ASE noise.
We investigate the generation of phonon wavepackets in optical fibers via electrostriction from coherent optical waves. Solving the elastodynamic equation subject to the electrostrictive force, we are able to reproduce experimental spectra found in standard and photonic crystal fibers. We discuss the two important practical cases of forward interaction, dominated by elastic resonances of the fiber, and backward interaction, for which an efficient mechanism of phonon guidance by light is found. The latter result describes the formation of the coherent phonon wavepacket involved in stimulated Br…
We introduce a mechanism of stable spatiotemporal soliton formation in a multimode fiber laser. This is based on spatially graded dissipation, leading to distributed Kerr-lens mode-locking. Our analysis involves solutions of a generalized dissipative Gross-Pitaevskii equation. This equation has a broad range of applications in nonlinear physics, including nonlinear optics, spatiotemporal patterns formation, plasma dynamics, and Bose-Einstein condensates. We demonstrate that careful control of dissipative and non-dissipative physical mechanisms results in the self-emergence of stable (2+1)-dime…
We report on the generation of multi-wavelength dissipative soliton (DS) in an all normal dispersion fiber laser passively mode-locked with a semiconductor saturable absorber mirror (SESAM). We show that depending on the strength of the cavity birefringence, stable single-, dual- and triple-wavelength DSs can be formed in the laser. The multi-wavelength soliton operation of the laser was experimentally investigated, and the formation mechanisms of the multi-wavelength DSs are discussed.
We propose that parametrically excited patterns, also known as Faraday patterns, can be observed in nonlinear fiber resonators, where the coefficient of Kerr nonlinearity is periodically varying along the fiber in resonator. We study the parametric instability analytically on the basis of the Floquet theory, also numerically, by direct integration of the system. Instead of classical Faraday wave excitation scenario, where modulation in time causes formation of patterns in space, here we propose an inverted scenario, where the modulation in space excites the patterns in time.
