Optomechanical systems typically use light to control the quantum state of a mechanical resonator. In this paper, we propose a scheme for controlling the quantum state of light using the mechanical degree of freedom as a controlled beam splitter. Preparing the mechanical resonator in non-classical states enables an optomechanical Stern-Gerlach interferometer. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, we recover single photon and two-photon interference via a classically controlled beam splitter. The visibility of the two-photon interference is particularly sensitive to coherent excitations in the mechanical resonator and this could form the basis of an optically transduced weak-force sensor.
We propose a domino-cooling method to realize simultaneous ground-state cooling of a coupled mechanical-resonator chain through an optomechanical cavity working in the unresolved-sideband regime. This domino-effect cooling is realized by combining the cold-damping feedback on the first mechanical resonator with nearest-neighbor couplings between other neighboring mechanical resonators. We obtain analytical results for the effective susceptibilities, noise spectra, final mean phonon numbers, and cooling rates of these mechanical resonators, and find the optimal-cooling condition for these reson…
We introduce a protocol capable of generating a general measurement operator for a mechanical resonator. The technique requires a qubit-resonator interaction and uses a coherent pulse to drive qubit transitions. This is followed by projective measurement of the qubit's energy, constraining the resonator in a state that depends on the pulse shape. The freedom to choose a pulse shape for the coherent drive enables an arbitrary position-basis measurement operator. Using this measurement operator, we outline a two pulse protocol that probabilistically generates a pure mechanical state with a desir…
We show that lattice systems, such as the Bose-Hubbard model, can be simulated on a single nano- or micro-mechanical resonator, by exploiting its many modes. The on-site Hamiltonians are engineered by coupling the mechanical modes to the modes of a pair of optical or stripline resonators, and the connections between the lattice sites are engineered in a similar way. The lattice network structure is encoded in the frequency components of the fields driving the resonators. This three-resonator configuration also allows universal quantum computing on the nano-resonator.
Mechanical resonators represent one of the most promising candidates to mediate the interaction between different quantum technologies, bridging the gap between efficient quantum computation and long-distance quantum communication. In this letter, we introduce a novel interferometric scheme where the interaction of a mechanical resonator with input/output quantum pulses is controlled by an independent classical drive. We design protocols for state teleportation and direct quantum state transfer, between distant mechanical resonators. The proposed device, feasible with state-of-the-art technolo…
We have cooled the motion of a radio-frequency nanomechanical resonator by parametric coupling to a driven microwave frequency superconducting resonator. Starting from a thermal occupation of 480 quanta, we have observed occupation factors as low as 3.8$\pm$1.2 and expect the mechanical resonator to be found with probability 0.21 in the quantum ground state of motion. Cooling is limited by random excitation of the microwave resonator and heating of the dissipative mechanical bath.
We propose dynamical schemes to engineer coherent states of a mechanical resonator coupled to an ancillary, superconducting flux qubit. The flux qubit, when repeatedly projected on to its ground state drives the mechanical resonator in to a coherent state in probabilistic, albeit heralded fashion. Assuming no operations on the state of the mechanical resonator during the protocol, coherent states are successfully generated only up to a certain value of the displacement parameter. This restriction can be overcome at the cost of a one-time operation on the initial state of the mechanical resonat…
Quantum manipulation of coupled mechanical resonators has become an important research topic in optomechanics because these systems can be used to study the quantum coherence effects involving multiple mechanical modes. A prerequisite for observing macroscopic mechanical coherence is to cool the mechanical resonators to their ground state. Here we propose a theoretical scheme to cool two coupled mechanical resonators by introducing an optomechanical interface. The final mean phonon numbers in the two mechanical resonators are calculated exactly and the results show that the ground-state coolin…
We propose measurement based conditional generation of superposition of motional states of nanomechanical resonator. We consider a two level quantum mechanical system coupled with nanomechanical resonator through phonon exchange. An interaction, which produces shifts in the state of nanomechanical resonator depending on the state of the qubit, is realized by driving qubit through two resonant lasers. The measurement of the state of quantum mechanical system produces superposition states of nanomechanical resonator. We show that the quantum interference between states in superposition may lead …
When a gain system is coupled to a loss system, the energy usually flows from the gain system to the loss one. We here present a counterintuitive theory for the ground-state cooling of the mechanical resonator in optomechanical system via a gain cavity. The energy flows first from the mechanical resonator into the loss cavity, then into the gain cavity, and finally localizes there. The energy localization in the gain cavity dramatically enhances the cooling rate of the mechanical resonator. Moreover, we show that unconventional optical spring effect, e.g., giant frequency shift and optically i…
We demonstrate that a geometric phase, generated via a sequence of four optomechanical interactions, can be used to increase, or generate nonlinearities in the unitary evolution of a mechanical resonator. Interactions of this form lead to new mechanisms for preparing mechanical squeezed states, and preparation of non-classical states with significant Wigner negativity.
We study an optomechanical system in which a microwave field and an optical field are coupled to a common mechanical resonator. We explore methods that use these mechanical resonators to store quantum mechanical states and to transduce states between the electromagnetic resonators from the perspective of the effect of mechanical decoherence. Besides being of fundamental interest, this coherent quantum state transfer could have important practical implications in the field of quantum information science, as it potentially allows one to overcome intrinsic limitations of both microwave and optica…
We report the experimental demonstration of optomechanical light storage in a silica resonator. We use writing and readout laser pulses tuned to one mechanical frequency below an optical cavity resonance to control the coupling between the mechanical displacement and the optical field at the cavity resonance. The writing pulse maps a signal pulse at the cavity resonance to a mechanical excitation. The readout pulse later converts the mechanical excitation back to an optical pulse. The light storage lifetime is determined by the relatively long damping time of the mechanical excitation.
A deterministic scheme for generating a macroscopic superposition state of a nanomechanical resonator is proposed. The nonclassical state is generated through a suitably engineered dissipative dynamics exploiting the optomechanical quadratic interaction with a bichromatically driven optical cavity mode. The resulting driven dissipative dynamics can be employed for monitoring and testing the decoherence processes affecting the nanomechanical resonator under controlled conditions.
Ground state cooling of mechanical resonator is a way to generate macroscopic quantum states. Here we present a study of optomechanical cooling under the drive of square pulses without smooth profile. By illustrating the dynamical processes of cooling, we show how to choose the amplitudes and durations of square pulses, as well as the intervals between them, so that a mechanical resonator can be quickly cooled down to its ground state. Compared with the cooling under a continuous-wave drive field, the ground state cooling of a mechanical resonator can be performed more efficiently and flexibly…
We study cooling performance of a realistic mechanical resonator containing defects. The normal cooling method through an optomechanical system does not work efficiently due to those defects. We show by employing periodical $σ_z$ pulses, we can eliminate the interaction between defects and their surrounded heat baths up to the first order of time. Compared with the cooling performance of no $σ_z$ pulses case, much better cooling results are obtained. Moreover, this pulse sequence has an ability to improve the cooling performance of the resonator with different defects energy gaps and different…
We study the resonant optical transitions of a single nitrogen-vacancy (NV) center that is coherently dressed by a strong mechanical drive. Using a gigahertz-frequency diamond mechanical resonator that is strain-coupled to an NV center's orbital states, we demonstrate coherent Raman sidebands out to the ninth order and orbital-phonon interactions that mix the two excited-state orbital branches. These interactions are spectroscopically revealed through a multi-phonon Rabi splitting of the orbital branches which scales as a function of resonator driving amplitude, and is successfully reproduced …
We present an analysis of the cooling of a micro-mechanical resonator by means of measurements and back action. The measurements are performed via the coupling to a Cooper-pair box, and although the coupling does not lead to net cooling, the extraction of information and hence entropy from the system leads to a pure quantum state. Under suitable circumstances, the states become very close to coherent states, conditioned on the measurement record, and can hence be displaced to the oscillator ground state.
A challenge of modern physics is to investigate the quantum behavior of a bulk material object, for instance a mechanical oscillator. We have earlier demonstrated that by coupling a mechanical oscillator to the energy levels of embedded rare-earth ion dopants, it is possible to prepare such a resonator in a low phonon number state. Here, we describe how to extend this protocol in order to prepare momentum- and position squeezed states, and we analyze how the obtainable degree of squeezing depends on the initial conditions and on the coupling of the oscillator to its thermal environment.
We analyze the amplitude and phase noise of limit-cycle oscillations in a mechanical resonator coupled parametrically to an optical cavity driven above its resonant frequency. At a given temperature the limit-cycle oscillations have lower amplitude noise than states of the same average amplitude excited by a pure harmonic drive; for sufficiently low thermal noise a sub-Poissonian resonator state can be produced. We also calculate the linewidth narrowing that occurs in the limit-cycle states, and show that while the minimum is set by direct phase diffusion, diffusion due to the optical spring e…
We propose a feasible scheme to cool down a mechanical resonator (MR) in a three-mirror cavity optomechanical system with controllable external optical drives. Under the Born-Oppenheimer (BO) approximation, the whole dynamics of the mechanical resonator and cavities is reduced to that of a time-dependent harmonic oscillator, whose effective frequency can be controlled through the optical driving fields. The fast cooling of the MR can be realized by controlling the amplitude of the optical drives. Significantly, we further show that the ground-state cooling may be achieved via the three-mirror …
We propose a method to decouple the nanomechanical resonator in optomechanical systems from the environmental noise by introducing a chaotic coherent feedback loop. We find that the chaotic controller in the feedback loop can modulate the dynamics of the controlled optomechanical system and induce a broadband response of the mechanical mode. This broadband response of the mechanical mode will cut off the coupling between the mechanical mode and the environment and thus suppress the environmental noise of the mechanical modes. As an application, we use the protected optomechanical system to act…
We theoretically study the transparency and amplification of a weak probe field applied to the cavity in hy- brid systems formed by a driven superconducting circuit QED system and a mechanical resonator, or a driven optomechanical system and a superconducting qubit. We find that both the mechanical resonator and the su- perconducting qubit can result in the transparency to a weak probe field in such hybrid systems when a strong driving field is applied to the cavity. We also find that the weak probe field can be amplified in some parameter regimes. We further study the statistical properties o…
Ground-state cooling of mechanical resonators is an important task in quantum optomechanics, because it is a necessary prerequisite for creation, manipulation, and application of macroscopic mechanical coherence. Here, we propose a transient-state scheme to accelerate ground-state cooling of a mechanical resonator in a three-mode loop-coupled optomechanical system via shortcuts to adiabaticity (STA). We consider four kinds of coupling protocols and calculate the evolution of the mean phonon number of the mechanical resonator in both the adiabatic and STA cases. We verify that the ground-state …
Fully quantum-mechanical analytic results for single-photon transport in a single-mode waveguide coupled to a whispering-gallery resonator interacting with a two-level atom
We show that the gravitational acceleration can be measured with the matter-wave Ramsey interferometry, by using a nitrogen-vacancy center coupled to a nano-mechanical resonator. We propose two experimental methods to realize the Hamiltonian, by using either a cantilever resonator or a trapped nanoparticle. The scheme is robust against the thermal noise, and could be realized at the temperature much higher than the quantum regime one. The effects of decoherence on the interferometry fringe visibility is caculated, including the mechanical motional decay and dephasing of the nitrogen-vacancy ce…
We present and analyze a proposal for a macroscopic quantum delayed-choice experiment with massive mechanical resonators. In our approach, the electronic spin of a single nitrogen-vacancy impurity is employed to control the coherent coupling between the mechanical modes of two carbon nanotubes. We demonstrate that a mechanical phonon can be in a coherent superposition of wave and particle, thus exhibiting both behaviors at the same time. We also discuss the mechanical noise tolerable in our proposal and predict a critical temperature below which the morphing between wave and particle states ca…
We propose a scheme to cool down a mechanical resonator to its quantum ground-state, which is interacting with a working fluid via an optomechanical-like coupling. As opposed to standard laser cooling schemes where coherence renders the motion of a resonator to its ground-state, we consider an incoherent thermal source to achieve the same aim. We show that simultaneous cooling of two degenerate or near-degenerate mechanical resonators is possible, which is otherwise a challenging goal to achieve. The generalization of this method to the simultaneous cooling of multiple resonators is straightfo…
A standard model is suggested to explore correlation features of two spatially separated optomechanical cavities. The cavities are coupled through the photon-hopping process. In particular, we investigate the generation of entanglement between mechanical resonators in the strong coupling regime and the two cavities are assumed to be driven by a coherent laser field. In order to quantify entanglement we use the logarithmic negativity. The analytical solutions are presented for the system in a parameter regime very close to the current experimental results. We show that in the presence of the ph…
We describe an experimentally feasible protocol for performing a variant of the quantum delayed-choice experiment with massive objects. In this scheme, a single nitrogen-vacancy (NV) center in diamond driven by microwave fields is dispersively coupled to a massive mechanical resonator. A double-pulse Ramsey interferometer can be implemented with the spin-mechanical setup, where the second Ramsey microwave pulse drives the spin conditioned on the number states of the resonator. The probability for finding the NV center in definite spin states exhibits interference fringes when the mechanical re…
We present a new optomechanical device where the motion of a micromechanical membrane couples to a microwave resonance of a three-dimensional superconducting cavity. With this architecture, we realize ultrastrong parametric coupling, where the coupling rate not only exceeds the dissipation rates in the system but also rivals the mechanical frequency itself. In this regime, the optomechanical interaction induces a frequency splitting between the hybridized normal modes that reaches 88% of the bare mechanical frequency, limited by the fundamental parametric instability. The coupling also exceeds…
We study the energy-level evolution and ground-state cooling of mechanical resonators under a synthetic phononic gauge field. The tunable gauge phase is mediated by the phase difference between the $\mathcal{PT}$- and anti-$\mathcal{PT}$-symmetric mechanical couplings in a multimode optomechanical system. The transmission spectrum then exhibits the asymmetric Fano line shape or double optomechanically induced transparency by modulating the gauge phase. Moreover, the eigenvalues will collapse and become degenerate although the mechanical coupling is continuously increased. Such counterintuitive…
We propose a scheme able to generate stationary continuous variable entanglement between an optical and a microwave cavity mode by means of their common interaction with a micro-mechanical resonator. We show that when both cavities are intensely driven one can generate bipartite entanglement between any pair of the tripartite system, and that, due to entanglement sharing, optical-microwave entanglement is efficiently generated at the expense of microwave-mechanical and opto-mechanical entanglement.
Cavity optomechanics provides a unique platform for controlling micromechanical systems by means of optical fields that crosses the classical-quantum boundary to achieve solid foundations for quantum technologies. Currently, optomechanical resonators have become promising candidates for the development of precisely controlled nano-motors, ultrasensitive sensors and robust quantum information processors. For all these applications, a crucial requirement is to cool the mechanical resonators down to their quantum ground states. In this paper, we present a novel cooling scheme to further cool a mi…
We study the unitary time evolution of photons interacting with a dielectric resonator using coherent control pulses. We show that non-Markovianity of transient photon dynamics in the resonator subsystem may be controlled to within a photon-resonator transit time. In general, appropriate use of coherent pulses and choice of spatial subregion may be used to create and control a wide range of non-Markovian transient dynamics in photon resonator systems.
We theoretically propose a scheme for the generation of a non-classical single-mode motional state of a mechanical resonator (MR) in the three-mode optomechanical systems, in which two optical modes of the cavities are linearly coupled to each other and one mechanical mode of the MR is optomechanically coupled to the two optical modes with the same coupling strength simultaneously. One cavity is driven by a coherent laser light. By properly tuning the frequency of the weak driving field, we obtain engineered Liouvillian superoperator via engineering the selective interaction Hamiltonian confin…
Continuous weak measurement allows localizing open quantum systems in state space, and tracing out their quantum trajectory as they evolve in time. Efficient quantum measurement schemes have previously enabled recording quantum trajectories of microwave photon and qubit states. We apply these concepts to a macroscopic mechanical resonator, and follow the quantum trajectory of its motional state conditioned on a continuous optical measurement record. Starting with a thermal mixture, we eventually obtain coherent states of 78% purity--comparable to a displaced thermal state of occupation 0.14. W…
We put forward an experimentally feasible scheme for heralded entanglement generation between two distant macroscopic mechanical resonators. The protocol exploits a hybrid quantum device, a qubit interacting with a mechanical resonator as well as a cavity mode, for each party. The cavity modes interfere on a beam-splitter followed by suitable heralding detections which post-select a hybrid entangled state with success probability 1/2. Subsequently, by local measurements on the qubits a mechanical entangled coherent state can be achieved. The mechanical entanglement can be further verified via …
We study a hybrid nano-mechanical system coupled to a spin ensemble as a quantum simulator to favor a quantum interference effect, the electromagnetically induced transparency (EIT). This system consists of two nano-mechanical resonators (NAMRs), each of which coupled to a nuclear spin ensemble. It could be regarded as a crucial element in the quantum network of NAMR arrays coupled to spin ensembles. Here, the nuclear spin ensembles behave as a long-lived transducer to store and transfer the NAMRs' quantum information. This system shows the analog of EIT effect under the driving of a probe mic…
By spectrally hole burning an inhomogeneously broadened ensemble of ions while applying a controlled perturbation, one can obtain spectral holes that are functionalized for maximum sensitivity to different perturbations. We propose to use such hole burnt structures for the dispersive optical interaction with rare-earth ion dopants whose frequencies are sensitive to crystal strain due to the bending motion of a crystal cantilever. A quantitative analysis shows that good optical sensitivity to the bending motion is obtained if a magnetic field gradient is applied across the crystal during hole b…
Universal sensing the motion of mechanical resonators with high precision and low back-action is of paramount importance in ultra-weak signal detection which plays a fundamental role in modern physics. Here we present a universal scheme that transfer mechanically the motion of the resonator not directly measurable to the one can be precisely measured using mechanical frequency conversion. Demonstration of the scheme at room temperature shows that both the motion imprecision and the back-action force are below the intrinsic level of the objective resonator, which agree well with our theoretical…
Cavity cooling via quantum backaction force can extract thermal fluctuations from a mechanical resonator to reach the quantum ground state. Surface or bulk two-level-system (TLS) defects in a mechanical resonator can couple with the mechanical mode via deformation potential and affect the cooling process significantly. Here, we develop a theory to study the cavity cooling of a mechanical mode in the presence of a TLS defect using the adiabatic elimination technique. Our result shows that the cooling process depends strongly on the resonance and the damping rate of the TLS.
In the framework of the nonsecular perturbation theory based on the Bogoliubov averaging method, an optomechanical system with an asymmetric anharmonic mechanical resonator is studied. The cross-Kerr interaction and the Kerr-like self-interaction of photons and vibration quanta arise in the Hamiltonian. These interactions are induced by both cubic and quartic nonlinearities of oscillations of the mechanical resonator and the cavity-resonator interaction that is linear in mechanical displacements. We demonstrate a bistable behavior of the number of vibration quanta and find that this behavior i…
We present an ultrafast feasible scheme for ground state cooling of a mechanical resonator via repeated random time-interval measurements on an auxiliary flux qubit. We find that the ground state cooling can be achieved with \emph{several} such measurements. The cooling efficiency hardly depends on the time-intervals between any two consecutive measurements. The scheme is also robust against environmental noises.
Micro- and nanoscale mechanical resonators have recently emerged as ubiquitous devices for use in advanced technological applications, for example in mobile communications and inertial sensors, and as novel tools for fundamental scientific endeavors. Their performance is in many cases limited by the deleterious effects of mechanical damping. Here, we report a significant advancement towards understanding and controlling support-induced losses in generic mechanical resonators. We begin by introducing an efficient numerical solver, based on the "phonon-tunneling" approach, capable of predicting …
Achieving quantum correlations between two distant systems is a desirable feature for quantum networking. In this work, we study a system composed of two quantum emitter-cavity subsystems spatially separated. A mechanical resonator couples to either both quantum emitters or both cavities leading to quantum correlations between both subsystems such as non-local light-matter dressed states and cavity-cavity normal mode splitting. These indirect couplings can be explained by an effective Hamiltonian for large energy detuning between the mechanical resonator and the atoms/cavities. Moreover, it is…
