We study the electronic structures of TiO2/Ti4O7 and Ta2O5/TaO2 interfaces using the screened exchange (sX-LDA) functional. Both of these bilayer structures are useful infrastructures for high performance RRAMs. We find that the system Fermi energies of both interfaces are just above the conduction band edge of the corresponding stoichiometric oxides. According to the charge transition levels of the oxygen vacancies in Ta2O5 and TiO2, the oxygen vacancies are stabilized at the -2 charged state. We propose to introduce interfacial dopants to shift the system Fermi energies downward so that the +2 charged oxygen vacancy can be stable, which is important for the controlled switching under the electrical field. Several dipole models are presented to account for the ability of Fermi level shift due to the interfacial dopants.
Grain boundary engineering via dopant segregation can dramatically change the properties of a material. For metallic systems, most current studies concerning interfacial segregation and subsequent transitions of grain boundary structure are limited to binary alloys, yet many important alloy systems contain more than one type of dopant. In this work, hybrid Monte Carlo/molecular dynamics simulations are performed to investigate the behavior of dopants at interfaces in two model ternary alloy systems: Cu-Zr-Ag and Al-Zr-Cu. Trends in boundary segregation are studied, as well as the propensity fo…
Modulation of structural short-range order due to chemical patterning in multi-component amorphous interfacial complexions
University of California, Irvine（加州大学尔湾分校）；Johns Hopkins University（约翰斯·霍普金斯大学）；Irvine Materials Research Institute, University of California, Irvine（加州大学尔湾分校欧文材料研究所）
Due to high density of native defects, the prototypical topological insulator (TI), Bi$_2$Se$_3$, is naturally n-type. Although Bi$_2$Se$_3$ can be converted into p-type by substituting 2+ ions for Bi, only light elements such as Ca have been so far effective as the compensation dopant. Considering that strong spin-orbit coupling (SOC) is essential for the topological surface states, a light element is undesirable as a dopant, because it weakens the strength of SOC. In this sense, Pb, which is the heaviest 2+ ion, located right next to Bi in the periodic table, is the most ideal p-type dopant …
Understanding the effects of atomic structure modification in hematite photoanodes is essential for the rational design of high-efficiency functionalizations. Recently it was found that interface modification with Sn/Sb segregates considerably increases hematite photocatalytic efficiency. However, the understanding of the different electronic effects of these modifications at the atomic level is still lacking. This letter describes the segregation effects of two different dopants-Sn and Sb-on both the solid-solid (grain-boundaries) and solid-liquid interfaces (surfaces) of hematite. Within an …
The effect of dopants on the metallic glass forming ability is usually considered based on analysis of changes in the liquid structure or thermodynamics. What is missing in such considerations is an analysis of how a dopant changes the properties of the crystal phases which can form instead of the glass. In order to illuminate this aspect we performed molecular dynamics simulations to study the effects of Mg and Sm dopants on the crystal nucleation in Al. The simulation data were found to be consistent with the experimental observations that addition of Mg to Al does not lead to vitrification …
Interfacial segregation can stabilize grain structures and even lead to grain boundary complexion transitions. However, understanding of the complexity of such phenomena in polycrystalline materials is limited, as most studies focus on bicrystal geometries. In this work, we investigate interfacial segregation and subsequent complexion transitions in polycrystalline Cu-Zr alloys using hybrid Monte Carlo/molecular dynamics simulations. No significant change in the grain size or structure is observed upon Zr dopant addition to a pure Cu polycrystal at moderate temperature, where grain boundary se…
The kinetics of intrinsic and dopant-enhanced solid phase epitaxy (SPE) are stud- ied in buried amorphous Si (a-Si) layers in which SPE is not retarded by H. As, P, B and Al profiles were formed by multiple energy ion implantation over a con- centration range of 1 - 30 x 1019 /cm3. Anneals were performed in air over the temperature range 460-660 oC and the rate of interface motion was monitored us- ing time resolved reflectivity. The dopant-enhanced SPE rates were modeled with the generalized Fermi level shifting model using degenerate semiconductor statis- tics. The effect of band bending bet…
Alloying of In/Zn oxides with various X atoms stabilizes the IXZO structures but generates electron traps in the compounds, degrading the electron mobility. To assess whether the latter is linked to the oxygen affinity or the ionic radius, of the X element, several IXZO samples are synthesized by the sol-gel process, with a large number (14) of X elements. The IXZOs are characterized by XPS, SIMS, DRX, and UV-spectroscopy and used for fabricating thin film transistors. Channel mobility and the interface defect density NST, extracted from the TFT electrical characteristics and low frequency noi…
The existed theories and methods for calculating interfacial thermal conductance of solid-solid interface lead to diverse values that deviate from experimental measurements. In this letter, We propose a model to estimate the ITC at high temperature without comprehensive calculations, where the interface between two dissimilar solids can be treated as an amorphous thin layer and the coordination number density across interface becomes a key parameter. Our model predicts that the ITCs of various interfaces at 300K are in a narrow range: 10$^{7}$W m$^{-2}$K$^{-1}$ $\sim $10$^{9}$ W m$^{-2}$ K$^{-…
A method based on the Gibbs' adsorption isotherm is developed to calculate the decrease in interfacial free energy resulting from solute segregation at an internal interface, built on measured concentration profiles. Utilizing atom-probe tomography (APT), we first measure a concentration profile of the relative interfacial excess of solute atoms across an interface. To accomplish this we utilize a new method based on J. W. Cahn's formalism for the calculation of the Gibbs interfacial excess. We also introduce a method to calculate the decrease in interfacial free energy that is caused by the s…
Using ab-initio calculations within the framework of Density Functional Theory (DFT), atomic structures and electronic properties of MoS2/HfO2 interface are investigated. The impact of interfacial oxygen concentration on the MoS2/HfO2 interface electronic structure is examined in order to mimic the atomic layer deposition growth at ambient conditions. Then, the effect on band offsets and the thermodynamic stability of those interfaces is investigated and compared with available relevant experimental data. These results seem to indicate that, for a well-prepared interface, the electronic device…
The enhanced photocatalytic performance of doped graphene(GR)/semiconductor nanocomposites have recently been widely observed, but an understanding of the underlying mechanisms behind it is still out of reach. As a model system to study the effect of dopants, we investigate the electronic structures and optical properites of doped GR/Ag3PO4 nanocomposites using the first-principles calculations, demonstrating that the band gap, near-gap electronic structure and interface charge transfer of the doped GR/Ag3PO4(100) composite can be tuned by the dopants. Interestingly, the doping atom and C atom…
We have measured an Ag/Al interface specific resistance, 2AR(Ag/Al)(111) = 1.4 fOhm-m^2, that is twice that predicted for a perfect interface, 50% larger than for a 2 ML 50%-50% alloy, and even larger than our newly predicted 1.3 fOhmm^2 for a 4 ML 50%-50% alloy. Such a large value of 2ARAg/Al(111) confirms a predicted sensitivity to interfacial disorder and suggests an interface greater than or equal to 4 ML thick. From our calculations, a predicted anisotropy ratio, 2AR(Ag/Al)(001)/2AR(Ag/Al)(111), of more then 4 for a perfect interface, should be reduced to less than 2 for a 4 ML interface,…
Chemically ordered B2 FeRh exhibits a remarkable antiferromagnetic-ferromagnetic phase transition that is first order. It thus shows phase coexistence, usually by proceeding though nucleation at random defect sites followed by propagation of phase boundary domain walls. The transition occurs at a temperature that can be varied by doping other metals onto the Rh site. We have taken advantage of this to yield control over the transition process by preparing an epilayer with oppositely directed doping gradients of Pd and Ir throughout its height, yielding a gradual transition that occurs between …
We report the angular dependence of magnetoresistance in two-dimensional electron gas at LaAlO$_3$/SrTiO$_3$ interface. We find that this interfacial magnetoresistance exhibits a similar angular dependence to the spin Hall magnetoresistance observed in ferromagnet/heavy metal bilayers, which has been so far discussed in the framework of bulk spin Hall effect of heavy metal layer. The observed magnetoresistance is in qualitative agreement with theoretical model calculation including both Rashba spin-orbit coupling and exchange interaction. Our result suggests that magnetic interfaces subject to…
We observed a magnetic interfacial effect due to the coupling between two interfaces of different materials. The interface is compoust of an antiferromagnetic and other quasi-ferromagnetic material. This effect we measured through the ferromagnetic resonance technique without and with electric current.
Density functional theory calculations have been performed to study the structures and energetics of coherent and semicoherent TiC/Fe interfaces. A systematic method for determining the interfacial energy for the semicoherent interface with misfit dislocation network has been developed. The obtained interfacial energies are used to calculate the aspect ratios for the disc-like precipitates and a quantitative agreement with the experimental results is reached. Based on the obtained interfacial energies and atomic structure details, we propose models for describing the evolution of the interfaci…
The analysis of the structure, chemical stability, electronic and ferroelectric properties of the interfaces between Pt(001) and PbZrTiO$_3$(001) (PZT) have been performed with $ab$ $initio$ methods. We show that the chemical environment plays a critical role in determining the interfacial reconstruction and charge redistribution at the metal/oxide interfaces. We demonstrate that the difference in interfacial bonds formed at the Pt/PZT interfaces with (TiZr)O$_2$ - and PbO- termination of PZT essentially defines the effectiveness of the screening, and ease of polarisation switching in PZT-base…
We present the results of classical molecular dynamics simulations to assess the relative contributions to interfacial thermal conductance from inelastic phonon processes at the interface and in the adjacent bulk materials. The simulated system is the prototypical interface between argon and "heavy argon" crystals, which enables comparison with many past computational studies. We run simulations interchanging the Lennard-Jones potential with its harmonic approximation to test the effect of anharmonicity on conductance. The results confirm that the presence of anharmonicity is correlated with i…
The interfacial Dzyaloshinskii-Moriya interaction (iDMI), surface anisotropy energy, and spin pumping at the Ir/Co interface are experimentally investigated by performing Brillouin light scattering. Contrary to previous reports, we suggest that the sign of the iDMI at the Ir/Co interface is the same as in the case of the Pt/Co interface. We also find that the magnitude of the iDMI energy density is relatively smaller than in the case of the Pt/Co interface, despite the large strong spin-orbit coupling (SOC) of Ir. The saturation magnetization and the perpendicular magnetic anisotropy (PMA) ene…
Novel phenomena appear when two different oxide materials are combined together to form an interface. For example, at the interface of LaAlO3/SrTiO3, two dimensional conductive states form to avoid the polar discontinuity and magnetic properties are found at such interface. In this work, we propose a new type of interface between two nonmagnetic and nonpolar oxides that could host a conductive state with magnetic properties, where it is the ferroelectric polarization discontinuity instead of the polar discontinuity that leads to the charge transfer, forming the interfacial conductive or magnet…
The Fe/MgO interface is an essential ingredient in spintronics as it shows giant tunneling magnetoresistance and strong perpendicular magnetic anisotropy (PMA). A recent study demonstrated that the insertion of an ultra-thin LiF layer between the Fe and MgO layers enhances PMA significantly. In this study, we perform x-ray magnetic circular dichroism measurements on Fe/LiF/MgO multilayers to reveal the origin of the PMA enhancement. We find that the LiF insertion increases the orbital-magnetic-moment anisotropy and thus the magnetic anisotropy energy. We attribute the origin of this orbital-ma…
Despite intense efforts it has remained unresolved whether and how interfacial spin-orbit coupling (ISOC) affects spin transport across heavy metal (HM)/ferromagnet (FM) interfaces. Here we report conclusive experiment evidence that the ISOC at HM/FM interfaces is the dominant mechanism for "spin memory loss". An increase in ISOC significantly reduces, in a linear manner, the dampinglike spin-orbit torque (SOT) exerted on the FM layer via degradation of the spin transparency of the interface for spin currents generated in the HM. In addition, the fieldlike SOT is also dominated by the spin Hal…
Annealing of crystalline multilayers composed of two miscible elements usually causes interfacial mixing of the constituent atoms, possibly leading to the formation of binary alloys at the interfaces. Magnetron sputtered c-Ni/a-Zr multilayers deposited at room temperature were vacuum annealed isochronally at 200degC and 400degC to observe thermal stability of the interfaces constituting the crystalline/amorphous multilayers. Control over the interfacial behaviour can aid the formation of materials with novel properties. The resultant changes in structural and magnetic properties of the multila…
The role of interfacial nonidealities and disorder on thermal transport across interfaces is traditionally assumed to add resistance to heat transfer, decreasing the thermal boundary conductance (TBC).$^1$ However, recent computational works have suggested that interfacial defects can enhance this thermal boundary conductance through emergence of unique vibrations that are intrinsic to the material interface and defect atoms,$^{2-6}$ a finding that contradicts traditional theory and conventional understanding. By manipulating the local heat flux of atomic vibrations that comprise these interfa…
Traditional theories of interfacial heat transfer by atomic vibrations, also known as phonons, do not explain how vibrational mode interactions contribute to interface conductance. Traditional methods also use the concept of phonons as particles or waves which propagate and transmit energy through interfaces; such methods are therefore inapplicable to realistic non-crystalline systems where phonons are not propagating. Here we introduce a more general formalism of interfacial phonon transport, rigorously derived from interatomic interactions projected onto the normal modes of the system, showi…
The implementation of graphene in semiconducting technology requires the precise knowledge about the graphene-semiconductor interface. In our work the structure and electronic properties of the graphene/$n$-Ge(110) interface are investigated on the local (nm) and macro (from $μ\mathrm{m}$ to mm) scales via a combination of different microscopic and spectroscopic surface science techniques accompanied by density functional theory calculations. The electronic structure of freestanding graphene remains almost completely intact in this system, with only a moderate $n$-doping indicating weak intera…
We report that atomic-layer alloying (intermixing) at a Pt/Co interface can increase, by approximately 30%, rather than degrade the interfacial spin transparency, and thereby strengthen the efficiency of the dampinglike spin-orbit torque arising from the spin Hall effect in the Pt. At the same time, this interfacial alloying substantially reduces fieldlike spin-orbit torque. Insertion of an ultrathin magnetic alloy layer at heavy-metal/ferromagnet interfaces represents an effective approach for improving interfacial spin transparency that may enhance not only spin-orbit torques but also the sp…
The deposition of a thin oxide layer at metal/semiconductor interfaces has been previously reported as a means of reducing contact resistance in 2D electronics. Using X-ray photoelectron spectroscopy with in-situ Ti deposition, we fabricate Au/Ti/TiOx/MoS2 samples as well as Au/Ti/MoS2 and Au/TiOx/MoS2 for comparison. Elemental titanium reacts strongly with MoS2 whereas no interface reactions are observed in the two types of samples containing TiOx/MoS2 interfaces. Using time domain thermoreflectance for the measurement of thermal boundary conductance, we find that samples contacted with Ti an…
We point out that the effective channel for the interfacial thermal conductance, the inverse of Kapitza resistance, of metal-insulator/semiconductor interfaces is governed by the electron-phonon interaction mediated by the surface states allowed in a thin region near the interface. Our detailed calculations demonstrate that the interfacial thermal conductance across Pb/Pt/Al/Au-diamond interfaces are only slightly different among these metals, and reproduce well the experimental results of the interfacial thermal conductance across metal-diamond interfaces observed by Stoner et al. [Phys. Rev.…
Existing theoretical models of the interfacial thermal conductance, i.e., Kapitza conductance, of insulating solid-fluid interfaces only consider bulk properties, e.g., acoustic mismatch model and diffuse mismatch model. In this work, we propose a classical lattice dynamical model calculation of the Kapitza conductance, thereby incorporating interfacial structural details. In our model, we assume that heat is mostly carried by phonons in the solid, and that sound waves carry diffusive heat from the interface into the bulk of the liquid, where both longitudinal and transverse sound waves are co…
Organic dopants are frequently used to surface-dope inorganic semiconductors. The resulted hybrid inorganic-organic materials have a crucial role in advanced functional materials and semiconductor devices. In this article, we study charge transfer at hybrid silicon-molecule interfaces theoretically. The idea is to filter out the best molecular acceptors to dope silicon with hole densities as high as 1013 cm-2. Here, we use a combinatorial algorithm merging chemical hardness method and first-principles DFT and GW calculations. We start by using the chemical hardness method which is simple and f…
Interface science has become a key aspect for fundamental research questions and for the understanding, design and optimization of urgently needed energy and information technologies. As the interface properties change during operation, e.g. under applied electrochemical stimulus, and because multiple bulk and interface processes coexist and compete, detailed operando characterization is needed. In this perspective, I present an overview of the state-of-the art and challenges in selected X-ray spectroscopic techniques, concluding that among others, interface-sensitivity remains a major concern…
Improving interfacial thermal transport is crucial for heat dissipation in systems. Here, we design a strategy by utilizing the water adsorption-desorption process in porous metal-organic frameworks (MOFs) to tune the interfacial heat transfer. We observe a changeable thermal conductance across the solid/porous MOFs interfaces owing to the dense water channel formed by the adsorbed water molecules in MOFs. Our experimental results show that the interfacial thermal conductance of Au/Cu3(BTC)2 heterointerfaces is increased up to 7.1 folds by this strategy, where Cu3(BTC)2 is a typical porous MOF…
Distinguishing Carrier Transport and Interfacial Recombination at Perovskite-Transport Layer Interfaces Using Ultrafast Spectroscopy and Numerical Simulation
A central goal of modern materials physics and nanoscience is control of materials and their interfaces to atomic dimensions. For interfaces between polar and non-polar layers, this goal is thwarted by a polar catastrophe that forces an interfacial reconstruction. In traditional semiconductors this reconstruction is achieved by an atomic disordering and stoichiometry change at the interface, but in multivalent oxides a new option is available: if the electrons can move, the atoms don`t have to. Using atomic-scale electron energy loss spectroscopy we find that there is a fundamental asymmetry b…
Microalloying elements tend to segregate to the matrix-precipitate phase boundaries to reduce the interfacial energy. The segregation mechanism is emerging as a novel design strategy for developing precipitation-hardened alloys with significantly improved coarsening resistance for high temperature applications. In this paper, we report a nanoscopic diffuse-interface thermodynamic model that describes multicomponent segregation behavior in two-phase substitutional alloys. Following classical approaches for grain boundaries, we employ the regular solution thermodynamics to establish segregation …
Molecular dynamics simulations provide a versatile framework to study interfacial heat transport, but their accuracy remains limited by the accuracy of available interatomic potentials. In the past, researchers have adopted the use of analytic potentials and simple mixing rules to model interfacial systems, with minimal justification for their use. On the other hand, contemporary machine learned interatomic potentials have greater complexity, but have not seen rigorous validation of interfacial heat transport properties. Moreover, when fitting to ab initio data, it is not known whether interfa…
This paper is concerned with the interfacial thermal resistance for polymer composites reinforced by various covalently functionalised graphene. By using molecular dynamics simulations, the obtained results show that the covalent functionalisation in graphene plays a significant role in reducing the graphene-paraffin interfacial thermal resistance. This reduction is dependent on the coverage and type of functional groups. Among the various functional groups, butyl is found to be the most effective in reducing the interfacial thermal resistance, followed by methyl, phenyl and formyl. The other …
We report the first ever accurate theoretical prediction of thermal conductance of any material interface. Thermal interfacial conductance of aluminum (Al)-sapphire (α-Al2O3) interface along crystal directions (111) Al || (0001) Al2O3 for temperature ranging from 50-500 K is calculated using two fundamentally different methods: interfacial conductance modal analysis (ICMA) and atomistic green function (AGF). While AGF overpredicts interfacial conductance, both the quantitative and qualitative predictions of ICMA are exceptional when compared with the time-domain thermoreflectance (TDTR) experi…
First-principles calculations were carried out to investigate interfacial strain effects on spin injection and spin polarization of a magnetic tunnel junction consisting of half-metallic full-Heusler alloy Co2CrAl and ferroelectric perovskite NaNbO3. Spin-dependent coherent tunneling was calculated within the framework of non-equilibrium Green's function technique. Both spin polarization and tunnel magnetoresistance (TMR) are affected by the interfacial strain but their responses to compressive and tensile strains are different. Spin polarization across the interface is fully preserved under a…
The spin dependent reflection at the interface is the key element to understand the spin transport. By completely solving the scattering problem based on first principles method, we obtained the spin resolved reflectivity spectra. The comparison of our theoretical results with experiment is good in a large energy scale from Fermi level to energy above vacuum level. It is found that interfacial distortion is crucial for understanding the spin dependence of the phase gain at the Cu$|$Co interface. Near the Fermi level, image state plays an important role to the phase accumulation in the copper f…
We measure the spin-charge interconversion by the spin Hall effect in ferromagnetic/Pt nanodevices. The extracted effective spin Hall angles (SHAs) of Pt evolve drastically with the ferromagnetic (FM) materials (CoFe, Co, and NiFe), when assuming transparent interfaces and a bulk origin of the spin injection/detection by the FM elements. By carefully measuring the interface resistance, we show that it is quite large and cannot be neglected. We then evidence that the spin injection/detection at the FM/Pt interfaces are dominated by the spin polarization of the interfaces. We show that interfaci…
The contact resistance between two dissimilar semiconductors is determined by the carrier transmission through their interface. Despite the ubiquitous presence of interfaces, quantitative simulation of charge transport across such interfaces is difficult, limiting the understanding of interfacial charge transport. This work employs Green's functions to study the charge transport across representative Si/Ge interfaces. For perfect interfaces, it is found that the transmittance is small and the contact resistance is high, not only because the mismatch of carrier pockets makes it hard to meet the…
Silicon dioxide and silicon (SiO$_{2}$/Si) interface plays a very important role in semiconductor industry. However, at nanoscale, its interfacial thermal properties haven't been well understood so far. In this paper, we systematically study the interfacial thermal resistance (Kapitza resistance) of a heterojunction composed of amorphous silicon dioxide and crystalline silicon by using molecular dynamics simulations. Numerical results have shown that Kapitza resistance at SiO$_{2}$/Si interface depends on the interfacial coupling strength remarkably. In the weak interfacial coupling limit, Kap…
We investigate the charge-transfer interfaces between metal and redox arylamine molecular films through studying the current-voltage characteristics of single-layer organic diodes with the aid of anode interfacial engineering method. The diode turn-on voltage is shown to be highly sensitive to the arylamine/metal charge-transfer interfaces and thus can serve as a probe in detecting such organic/metal interfaces. We show that the diode electrical performance could be tuned through engineering the arylamine/metal interfaces via controlling the factors of anode work function, arylamine substitute…
We present an ab initio study of the (001) interfaces between two insulating perovskites, the polar LaAlO3 and the nonpolar SrTiO3. We observe an insulating-to-metallic transition above a critical LaAlO3 thickness. We explain that the high conductivity observed at the TiO2 /LaO interface and the lack of similar conductivity at the SrO/AlO2 interface are inherent in the atomic geometry of the system. A large interfacial hopping matrix element between cations causes the formation of a bound electron state at the TiO2 /LaO interface. This mechanism for the formation of interfacial bound states su…
In this article, we report the influence of the interfacial roughness on the thermal boundary conductance between two crystals, using molecular dynamics. We show evidence of a transition between two regimes, depending on the interfacial roughness: when the roughness is small, the boundary conductance is constant taking values close to the conductance of the corresponding planar interface. When the roughness is larger, the conductance becomes larger than the planar interface conductance, and the relative increase is found to be close to the increase of the interfacial area. The cross-plane cond…
This work provides the community with an easily executable open-source Python package designed to automize the evaluation of Interfacial Phonons (InterPhon). Its strategy of arbitrarily defining the interfacial region and periodicity alleviates the excessive computational cost in applying ab initio phonon calculations to interfaces and enables efficient extraction of interfacial phonons. InterPhon makes it possible to apply all of the phonon-based predictions that have been available for bulk systems, to interfacial systems. The first example, in which this package was applied to InAs surfaces…
Interfaces impede heat flow in micro/nanostructured systems. Conventional theories for interfacial thermal transport were derived based on bulk phonon properties of the materials making up the interface without explicitly considering the atomistic interfacial details, which are found critical to correctly describing thermal boundary conductance (TBC). Recent theoretical studies predicted the existence of localized phonon modes at the interface which can play an important role in understanding interfacial thermal transport. However, experimental validation is still lacking. Through a combinatio…
