Surface and Step Conductivities on Si(111) Surfaces
Sven Just, Marcus Blab, Stefan Korte, Vasily Cherepanov, Helmut Soltner, Bert Voigtländer
备注:
Main paper: 5 pages, 4 figures, Supplemental material: 6 pages, 3 figures. The Supplemental Material contains details on the sample preparation and measurement procedure, additional experimental results for Si(111) samples with different doping levels, and the description of the three-layer conductance model
Four-point measurements using a multi-tip scanning tunneling microscope (STM) are carried out in order to determine surface and step conductivities on Si(111) surfaces. In a first step, distance-dependent four-point measurements in the linear configuration are used in combination with an analytical three-layer model for charge transport to disentangle the 2D surface conductivity from non-surface contributions. A termination of the Si(111) surface with either Bi or H results in the two limiting cases of a pure 2D or 3D conductance, respectively. In order to further disentangle the surface conductivity of the step-free surface from the contribution due to atomic steps, a square four-probe configuration is applied as function of the rotation angle. In total this combined approach leads to an atomic step conductivity of $σ_\mathrm{step} = (29 \pm 9)$ $\mathrmΩ^{-1} \mathrm{m}^{-1}$ and to a step-free surface conductivity of $σ_\mathrm{surf} = (9 \pm 2) \cdot 10^{-6}\,\mathrmΩ^{-1}/\square$ for the Si(111)-(7$\times$7) surface.
The quest for Casimir repulsion between Chern-Simons surfaces
在本文中,我们批判性地重新考虑表面之间的Casimir排斥进行陈-西蒙斯相互作用(对应于霍尔型导电性)。我们提出了一个推导的Lifshitz公式适用于任意平面几何形状,并讨论其性质。这种分析使我们能够解决以前文献中的一些矛盾。我们计算Casimir能量的两个表面,具有恒定的纵向和霍尔电导率。只有当两个表面具有相同符号的霍尔电导率时,排斥才是可能的。然而,纵向电导率存在一个临界值,超过该临界值,排斥消失。我们还考虑了一个模型,其中奇偶奇和奇偶校验项的电导率产生的极化张量的表面模式。与以前的文献L. Chen和S.- L. Wan,Phys.Rev.B84,075149(2011); B85,115102(2012),我们包括奇偶异常项。这一项确保了无限大质量表面模的电导率为零。我们发现,至少对于一个单一的模式,无论其质量的符号和值,有没有卡西米尔排斥。
Numerical analysis of surface and edge states in slabs, stripes, rods and surface steps of topological insulators
通过数值求解拓扑绝缘体的有效连续模型,其参数与拓扑绝缘体Bi 2 Se 3的能带结构相对应,分析了各种几何构型下可能出现的一维态.无质量狄拉克费米子存在于薄带的边缘,薄带的表面不仅沿范德华能隙取向,而且沿垂直方向取向。具有表面台阶的厚杆和厚板在表面上具有局部化的大量模式。我们认为,模式是大量的,它们的起源是由于相邻面的狄拉克点能量的差异。证明了在大矩形棒和表面台阶的边缘附近没有一维态。
Topological nature of step edge states on the surface of topological crystalline insulator Pb$_{0.7}$Sn$_{0.3}$Se
除了新颖的表面态,拓扑绝缘体还可以在晶体缺陷处表现出鲁棒的无隙态。台阶边是晶体表面常见的一类缺陷。在这项工作中,我们建立了拓扑晶体绝缘体(TCI)Pb $_{0.7}$ Sn $_{0.3}$ Se的[001]表面的台阶边缘的一维(1D)束缚态的拓扑性质,从理论和实验两方面。我们表明,台阶边缘态的拓扑稳定性来自于表面低能物理的一个紧急粒子-空穴对称性,并展示了粒子-空穴对称性破缺的实验特征。我们还揭示了外部磁场对一维束缚态的影响。我们的工作表明,类似的拓扑阶边模式的可能性,在其他拓扑材料与岩盐结构。