We report modifications of the ferroelectric and electrocaloric properties of BaTiO$_3$ by defects. For this purpose, we have combined \textit{ab initio}-based molecular dynamics simulations with a simple model for defects. We find that different kinds of defects modify the ferroelectric transition temperatures and polarization, reduce the thermal hysteresis of the transition and are no obstacle for a large caloric response. For a locally reduced polarization the ferroelectric transition temperature and the adiabatic response are slightly reduced. For polar defects an intriguing picture emerges. The transition temperature is increased by polar defects and the temperature range of the large caloric response is broadened. Even more remarkable, we find an inverse caloric effect in a broad temperature range.
The perovskite crystal BaTiO3 is modeled using a first-principles based effective Hamiltonian and molecular dynamics simulations are performed to estimate the pyroelectric response. The electrocaloric temperature change, \DeltaT, is calculated for different temperatures and externally applied electric fields. It is found that it is possible to achieve a large \DeltaT, around 5-6 K, for a relatively small electric field gradient, less than 100 kV/cm, if the applied fields have a small absolute magnitude.
We address the question of how the electrocaloric effect in epitaxial thin films of the prototypical ferroelectric BaTiO$_3$ is affected by the clamping to the substrate and by substrate-induced misfit strain. We use molecular dynamics simulations and a first-principles-based effective Hamiltonian to calculate the adiabatic temperature change $ΔT$ under different epitaxial constraints. Our results demonstrate that, consistent with phenomenological theory, clamping by the substrate reduces the maximum $ΔT$ compared to bulk BaTiO$_3$. On the other hand, compressive misfit-strain leads to a stron…
The electrocaloric effect (ECE) in BaTiO3 is simulated using two different first-principles based effective Hamiltonian molecular dynamics methods. The calculations are performed for a wide range of temperatures (30--900 K) and external electric fields (0--500 kV/cm). As expected, a large adiabatic temperature change, Delta-T, at the Curie temperature, T_C, is observed. It is found that for single crystals of pure BaTiO3, the temperature range where a large Delta-T is observed is narrow for small external electric fields (<50 kV/cm). Large fields (>100 kV/cm) may be required to broaden the eff…
We use molecular dynamics simulations for a first principles-based effective Hamiltonian to calculate two important quantities characterizing the electrocaloric effect in BaTiO$_3$, the adiabatic temperature change $ΔT$ and the isothermal entropy change $ΔS$, for different electric field strengths. We compare direct and indirect methods to obtain $ΔT$ and $ΔS$, and we confirm that both methods indeed lead to identical result provided that the system does not actually undergo a first order phase transition. We also show that a large electrocaloric response is obtained for electric fields beyond…
Molecular dynamics simulations predict a giant electrocaloric effect at the ferroelectric-antiferroelectric phase boundary in PZT (PbTiO$_3$-PbZrO$_3$). These large-scale simulations also give insights into the atomistic mechanisms of the electrocaloric effect in PZT materials. Studying a range of ferroelectric (FE) and antiferroelectric (AFE) PZT materials we found positive electrocaloric effect in FE composites, but AFE ones exhibit a positive-to-negative crossover. At the AFE-FE phase boundary we find complex domain patterns. We demonstrate that the origin of giant electrocaloric change of …
We have recently observed a giant electrocaloric effect (12 K in 25 V) in 350 nm sol-gel Pb Zr_0.95 Ti_0.05 O_3 films near the ferroelectric Curie temperature of 242oC. Here we demonstrate a giant electrocaloric effect (5 K in 25 V) in 260 nm sol-gel films of the relaxor ferroelectric 0.9 PbMg_(1/3)Nb_(2/3)O_3 - 0.1 PbTiO_3 near the Curie temperature of 60oC. This reduction in operating temperature widens the potential for applications in novel cooling systems.
We study the electrocaloric effect in the classic ferroelectric BaTiO3 through a series of phase transitions driven by applied electric field and temperature. We find both negative and positive electrocaloric effects, with the negative electrocaloric effect, where temperature decreases with applied field, in monoclinic phases. Macroscopic polarization rotation is evident through the monoclinic and orthorhombic phases under applied field, and is responsible for the negative electrocaloric effect.
We study the electrocaloric (EC) effect in bulk BaTiO$_3$ (BTO) using molecular dynamics simulations of a first principles-based effective Hamiltonian, combined with direct measurements of the adiabatic EC temperature change in BTO single crystals. We examine in particular the dependence of the EC effect on the direction of the applied electric field at all three ferroelectric transitions, and we show that the EC response is strongly anisotropic. Most strikingly, an inverse caloric effect, i.e., a temperature increase under field removal, can be observed at both ferroelectric-ferroelectric tra…
Giant electrocaloric (EC) effect is observed in BaTiO3 multilayer thick film structure. The temperature change is as high as 4.0 oC under an applied electric field of 352 kV/cm. Most importantly, the EC effect is found to depend on the varying rate of the applied field. Based on the giant net cooling (~0.37 J/g) resulting from the difference in the varying rates of rising and falling fields, the kinetic EC effect provides an effective solution for the design of refrigeration cycle in ferroelectric micro-refrigerator.
Over the past decades, there has been significant interest in new cooling technology based on the electrocaloric effect. The large electrocaloric effect observed in polymeric and inorganic ferroelectric materials made possible development of dielectric cooling devices of a new generation. We report a significant impact of annealing on the electrocaloric effect observed in 12/65/35 PLZT bulk ceramics. The electrocaloric data were obtained by direct measurements. Electrocaloric results confirm the existence of the significant electrocaloric response in this relaxor ferroelectric PLZT composition…
We use molecular dynamics with a first-principles-based shell model potential to study the electrocaloric effect (ECE) in lithium niobate, LiNbO$_3$, and find a giant electrocaloric effect along a line passing through the ferroelectric transition. With applied electric field, a line of maximum ECE passes through the zero field ferroelectric transition, continuing along a Widom line at high temperatures with increasing field, and along the instability that leads to homogeneous ferroelectric switching below $T_c$ with an applied field antiparallel to the spontaneous polarization. This line is de…
The influence of defect dipoles on the electrocaloric effect (ECE) in acceptor doped BaTiO$_3$ is studied by means of lattice-based Monte-Carlo simulations. A Ginzburg-Landau type effective Hamiltonian is used. Oxygen vacancy-acceptor associates are described by fixed defect dipoles with orientation parallel or anti-parallel to the external field. By a combination of canonical and microcanoncial simulations the ECE is directly evaluated. Our results show that in the case of anti-parallel defect dipoles the ECE can be positive or negative depending on the density of defect dipoles. Moreover, a …
To investigate the caloric effects in the CsH$_2$PO$_4$ ferroelectric, a modified pseudospin model of this crystal is used, which takes into account the dependence of the parameters of interaction between pseudospins on lattice strains. The model also takes into account the dependence of the effective dipole moment of a pseudospin on the order parameter. In the two-particle cluster approximation, the influence of the longitudinal electric field and hydrostatic pressure on the molar entropy of the crystal was studied. The electrocaloric and barocaloric effects were studied. The calculated elect…
Ferroelectrics are attractive candidate materials for environmentally friendly solid state refrigeration free of greenhouse gases. Their thermal response upon variations of external electric fields is largest in the vicinity of their phase transitions, which may occur near room temperature. The magnitude of the effect, however, is too small for useful cooling applications even when they are driven close to dielectric breakdown. Insight from microscopic theory is therefore needed to characterize materials and provide guiding principles to search for new ones with enhanced electrocaloric perform…
Atomistic effective Hamiltonian simulations are used to investigate electrocaloric (EC) effects in the lead-free Ba(Zr$_{0.5}$Ti$_{0.5}$)O$_{3}$ (BZT) relaxor ferroelectric. We find that the EC coefficient varies non-monotonically with the field at any temperature, presenting a maximum that can be traced back to the behavior of BZT's polar nanoregions. We also introduce a simple Landau-based model that reproduces the EC behavior of BZT as a function of field and temperature, and which is directly applicable to other compounds. Finally, we confirm that, for low temperatures (i.e., in non-ergodi…
The proton ordering model for the KH$_{2}$PO$_{4}$ type ferroelectrics is modified by taking into account non-linear effects, namely, the dependence of the effective dipole moments on the proton ordering parameter. Within the four-particle cluster approximation we calculate the crystal polarization, longitudinal dielectric permittivity, specific heat, and explore the electrocaloric effect. Smearing of the ferroelectric phase transition by the longitudinal electric field is described. A good agreement with experiment is obtained.
Physical nature of "giant" magnetocaloric and electrocaloric effects, MCE and ECE, is explained in terms of the new fundamentals of phase transitions, ferromagnetism and ferroelectricity. It is the latent heat of structural (nucleation-and-growth) phase transitions from a normal crystal state to the orientation-disordered crystal (ODC) state where the constituent particles are engaged in thermal rotation. The ferromagnetism or ferroelectricity of the material provides the capability to trigger the structural phase transition by application, accordingly, of magnetic or electric field.
The electrocaloric (EC) effect and energy storage properties of eco-friendly ferroelectric Ba0.9Sr0.1Ti1-xSnxO3 (BSTS-x) ceramics prepared by the conventional solid-state reaction method were studied. Significant energy efficiency exceeding 80% was found in our samples. In particular, BSTS-5 and BSTS-10 samples exhibit 92% and 88% efficiency, respectively, over a wide temperature range around room temperature (RT). Direct EC measurement and an indirect method based on the thermodynamic approach were used to characterize the EC effect, and both yielded consistent results. The largest electrocal…
The proton ordering model for the KH$_{2}$PO$_{4}$ type ferroelectrics is modified by taking into account the dependence of the effective dipole moments on the proton ordering parameter. Within the four-particle cluster approximation we calculate the crystal polarization and explore the electrocaloric effect. Smearing of the ferroelectric phase transition by a longitudinal electric field is described. A good agreement with experiment is obtained.
An atomistic effective Hamiltonian is used to investigate electrocaloric (EC) effects of Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_{3}$ (PMN) relaxor ferroelectrics in its ergodic regime, and subject to electric fields applied along the pseudocubic [111] direction. Such Hamiltonian qualitatively reproduces (i) the electric field-versus-temperature phase diagram, including the existence of a critical point where first-order and second-order transitions meet each other; and (ii) a giant EC response near such critical point. It also reveals that such giant response around this critical point is microscopically …
Ferroelectric perovskite oxides possess a large electrocaloric (EC) effect, but usually at high temperatures near the ferroelectric/paraelectric phase transition temperature, which limits their potential application as next-generation solid-state cooling devices. We use classical molecular dynamics to study the electric field induced phase transitions and EC effect in PMN-PT (PbMg1/3Nb2/3O3-PbTiO3). We find that the maximum EC strength of PMN-PT occurs within the morphotropic phase boundary (MPB) region at 300 K. The large adiabatic temperature change is caused by easy rotation of polarization…
We describe length and time rescaling across the paraelectric to ferroelectric phase transition in BaTiO$_3$. Small ferroelectric clusters are unable to grow in the paraelectric phase and exist for a short period of time only. The onset of the phase transition invokes a rescaling of both size and time lenghts as necessary ingredients for ferroelectricity to come into existence. The growing of ferroelectric domains involves correlated chains of Ti-O dipoles, which causes domain wall rigidity and domain shape stability. Ferroelectric nanodomains may host islands of opposite polarization (antifer…
Using Landau-Ginzburg-Devonshire theory and effective medium approximation, we analytically calculate typical dependences of the pyroelectric and electrocaloric coefficients on external electric field, temperature and radius for spherical single-domain ferroelectric nanoparticles. The considered physical model corresponds to the nanocomposite with small fraction of ferroelectric nanoparticles. Within the framework of the analytical model we establish how the size changes determine the temperature and field behavior pyroelectric and electrocaloric coefficients on example of BaTiO3 nanoparticles…
We show that the electrocaloric (EC) effect -- e.g., the temperature change experienced by an insulator upon application of an electric bias -- lends itself to a straightforward interpretation when expressed as a Taylor series in the external field. Our formalism explains in a unified and simple way the most notable small-field effects reported the literature -- e.g., the so-called {\em normal} (increase of temperature under bias, as usually found in ferroelectrics) and {\em inverse} (decrease of temperature, as e.g. in antiferroelectrics) EC responses -- and clarifies their physical interpret…
Structural studies on ultrathin SrRuO3/BaTiO3/SrRuO3 capacitors, with BaTiO3 thicknesses of between 5 nm and 30 nm, show well-defined interfaces between ferroelectric BaTiO3 and electrode SrRuO3 layers. In these capacitors, we cannot observe any extrinsic electrical effects due to either the formation of an insulating interfacial passive layer or passive-layer-induced charge injection. Such high quality interfaces result in very good fatigue endurance, even for the 5 nm thick BaTiO3 capacitor.
In this study, we report on a direct measurement method for the electrocaloric effect, the heating/cooling upon application/removal of an electric field in dielectric materials, based on a lock-in thermography technique. By use of sinusoidal excitation and multi-harmonic detection, the actual temperature change can be measured by a single measurement in the frequency domain even when the electrocaloric effect shows nonlinear response to the excitation field. We have demonstrated the method by measuring the temperature dependence of the electric-field-induced temperature change for two Sr-doped…
There is a surge of interest in developing environmentally friendly cooling technology based on the solid--state electrocaloric effect (ECE). Here, we point out that negative ECE with a fast cooling rate ($\approx$10$^{11}$ K/s) can be achieved by driving solid crystals to a high--temperature phase with a properly designed electric field pulse. Specifically, we predict that an ultrafast electric field pulse can cause a negative ECE up to 35 K in PbTiO$_3$ occurring on few picosecond time scales. We acquire and analyze these results by clarifying the mechanism of ECE during an adiabatic irrever…
Recent findings of a large electrocaloric (EC) effect in polymeric and inorganic ferroelectric materials open a potential possibility of development of solid-state cooling or heating devices of new generation with better energy efficiency that may be less harmful for the environment. We investigate by using direct measurements, the temperature and electric field dependence of the electrocaloric response in Pb1-xLax(ZryTi1-y)1-x/4O3 bulk ceramics (PLZT) with x=0.06 and 0.12. Here, the properties of the EC response were probed in a part of the PLZT composition phase diagram with low y=0.40 compo…
We report the discovery of serendipitous electrocaloric effects in commercial multilayer capacitors based on ferroelectric BaTiO3. Direct thermometry records ~0.5 K changes due to 300 kV cm-1, over a wide range of temperatures near and above room temperature. Similar results are obtained indirectly, via thermodynamic analysis of ferroelectric hysteresis loops. We compare and contrast these two results. Optimised electrocaloric multilayer capacitors could find applications in future cooling technologies.
We report on growth and ferroelectric (FE) properties of superlattices (SLs) composed of the FE BaTiO3 and the paraelectric (PE) CaTiO3. Previous theories have predicted that the polarization in (BaTiO3)n/(CaTiO3)n SLs increases as the sublayer thickness (n) increases when the same strain state is maintained. However, our BaTiO3/CaTiO3 SLs show a varying lattice-strain state and systematic reduction in polarization with increasing n while coherently-strained SLs with n=1, 2 show a FE polarization of ca. 8.5 uC/cm^2. We suggest that the strain coupling plays more important role in FE properties…
An atomistic effective Hamiltonian is used to compute electrocaloric (EC) effects in rare-earth substituted BiFeO$_{3}$ multiferroics. A phenomenological model is then developed to interpret these computations, with this model indicating that the EC coefficient is the sum of two terms, that involve electric quantities (polarization, dielectric response), the antiferromagnetic order parameter, and the coupling between polarization and antiferromagnetic order. The first one depends on the polarization and dielectric susceptibility, has the analytical form previously demonstrated for ferroelectri…
We study the impact of thermal hysteresis at the first-order structural/ferroelectric phase transitions on the electrocaloric response in bulk BaTiO$_3$ by performing molecular dynamics simulations for a first-principles-based effective Hamiltonian. We demonstrate that the electrocaloric response can conceptually be separated in two contributions: a transitional part, stemming from the discontinuous jump in entropy at the first order phase transition, and a configurational part, due to the continuous change of polarization and entropy within each phase. This latter part increases with the stre…
We report a first-principles study of (BaTiO${_3}$)$_m$/(BaO)$_n$ superlattices for a wide range of periodicities $m/n$. We show that such a system develops a polar zone-center instability for sufficiently large \textit{m}/\textit{n} ratio, which can be understood, at least qualitatively, from a simple electrostatic model and should lead to a ferroelectric ground-state. However, the analysis of the phonon dispersion curves also points out the appearance of stronger antiferroelectric instabilities at the zone boundaries around $m=4$, before the critical ratio for ferroelectricity is reached and…
Time-dependent polarization relaxation behaviors induced by a depolarization field $E_{d}$ were investigated on high-quality ultrathin SrRuO$_{3}$/BaTiO$_{3}$/SrRuO$_{3}$ capacitors. The $E_d$ values were determined experimentally from an applied external field to stop the net polarization relaxation. These values agree with those from the electrostatic calculations, demonstrating that a large $E_{d}$ inside the ultrathin ferroelectric layer could cause severe polarization relaxation. For numerous ferroelectric devices of capacitor configuration, this effect will set a stricter size limit than…
Precise specific heat of barium titanate single crystals of different quality has been measured with special attention to the temperature region above the ferroelectric phase transition. It is shown that excess specific heat of the multiaxial barium titanate in the paraelectric phase has a fluctuation nature and its temperature dependence is in accordance with the theoretical predictions of Levanyuk theory for multiaxial ferroelectrics. In this study the first observation of fluctuation contribution to the specific heat is presented.
Ferroelectric BaTiO3 films with large polarization have been integrated with Si(001) by pulsed laser deposition. High quality c-oriented epitaxial films are obtained in a substrate temperature range of about 300 deg C wide. The deposition temperature critically affects the growth kinetics and thermodynamics balance, resulting on a high impact in the strain of the BaTiO3 polar axis, which can exceed 2% in films thicker than 100 nm. The ferroelectric polarization scales with the strain and therefore deposition temperature can be used as an efficient tool to tailor ferroelectric polarization. The…
In acceptor doped ferroelectrics and in ferroelectric films and nanocomposites, defect dipoles, strain gradients, and the electric boundary conditions at interfaces and surfaces often impose internal bias fields. In this work we delicately study the impact of internal bias fields on the electrocaloric effect (ECE), utilizing an analytical model and \emph{ab initio}-based molecular dynamics simulations. We reveal the complex dependency of the ECE on field protocol and relative strength of internal and external fields. The internal fields may even reverse the sign of the response (inverse or neg…
In the framework of Landau--Ginzburg--Devonshire (LGD) phenomenological theory, the influence of misfit strains, surface energy, and finite-size effects on phase diagrams, polar properties, and hysteresis loops has been calculated for multilayered thin films of the type ferroelectric/virtual ferroelectric. The influence of elastic deformations that arise at the interface thin film--substrate owing to a mismatch between the lattice constants in the film and the substrate on the phase diagrams of multilayered thin films virtual ferroelectric SrTiO$_{3}$/ferroelectric BaTiO$_{3}$ has been studied…
For decades it has been a well-known fact that among the few ferroelectric compounds in the perovskite family namely BaTiO3, KNbO3, PbTiO3 Na1/2Bi1/2TiO3 the dielectric and piezoelectric properties of BaTiO3 is considerably higher than the others in polycrystalline form at room temperature. Further, similar to ferroelectric alloys exhibiting morphotropic phase boundary, single crystals of BaTiO3 exhibits anomalously large piezoelectric response when poled away from the direction of spontaneous polarization at room temperature. These anomalous features in BaTiO3 remained unexplained so far from…
We carry out first-principles calculations for CaTiO$_3$/BaTiO$_3$ superlattices with epitaxial strain corresponding to growth on a SrTiO$_3$ substrate, and consider octahedral rotations as well as ferroelectric distortions. The calculations are done as a function of electric displacement field, and both a macroscopic and a local electrostatic analysis are carried out. We find that strong octahedral rotations occur for TiO$_6$ octahedra sandwiched between CaO layers on both sides, but are strongly suppressed if either neighboring layer is a BaO layer. Due to the resulting enhancement of the fe…
Using the previously developed model we study the electrocaloric effect (ECE) in antiferroelectric crystals of squaric acid. At low temperatures, the polarization reorientation by the electric field applied along the crystallographic $a$ axis of these crystals is predicted to be a two-stage process, with one of the sublattice polarizations switched twice, by 90$^\circ$ each time. The $T$-$E$ landscapes of the model polarization and entropy are explored. The ECE, characterized by the introduced electric Grüneisen parameter, is found to be negative in the antiferroelectric phase. In the intermed…
Ferroelectric switching at edge dislocations in BaTiO$_3$ modelled at the atomic scale
Interdisciplinary Centre for Advanced Materials Simulation (ICAMS), Ruhr-University Bochum（波鸿鲁尔大学先进材料模拟跨学科中心）；Center for Interface-Dominated High Performance Materials (ZGH), Ruhr-University Bochum（波鸿鲁尔大学界面主导高性能材料中心）；Faculty of Physics and Astronomy, Ruhr-University Bochum（波鸿鲁尔大学物理与天文学系）；Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET - Unité Matériaux et Transformations（里尔大学、法国国家科学研究中心、法国国家农业食品与环境研究院、里尔中央理工学院、UMR 8207 材料与转化单元）
We have constructed the surface phase diagram of the BaTiO$_{3}$(001) surface by employing an evolutionary algorithm for surface structure prediction, where the ferroelectric polarization is included as a degree of freedom. Among over 1000 candidate structures explored, a surface reconstruction of (2$\times$1)-TiO is discovered to be thermodynamically stable and have the \emph{p2mm} plane group symmetry as observed experimentally. We find that the influence of ferroelectric polarization on the surface free energy can be either negligibly small or sizably large (over 1 eV per ($2 \times 1$) sup…
The size dependence of the ferroelectric properties of BaTiO$_3$ nanowires is studied from first-principles. We show that the ferroelectric distortion along the wire axis disappears below a critical diameter of about 1.2 nm. This disappearance is related to a global contraction of the unit cell resulting from low atomic coordinations at the wire surface. It is shown that a ferroelectric distortion can be recovered under appropriate tensile strain conditions.
We present molecular dynamics simulations of a realistic model of an ultrathin film of BaTiO$_3$ sandwiched between short-circuited electrodes to determine and understand effects of film thickness, epitaxial strain and the nature of electrodes on its ferroelectric phase transitions as a function of temperature. We determine a full epitaxial strain-temperature phase diagram in the presence of perfect electrodes. Even with the vanishing depolarization field, we find that ferroelectric phase transitions to states with in-plane and out-of-plane components of polarization exhibit dependence on thic…
Functional devices with ultrathin ferroelectric layers have been attracted as a promising candidate for next-generation memory and logic device applications. Using the ultrathin ferroelectric layers, particularly approaching the two-dimensional limit, however, it is still challenging to control ferroelectric switching and to observe ferroelectricity by spectroscopic tools. In particular, conventional methods such as electrical measurements and piezoelectric response force microscopy are very limited due to leakage currents and the smallness of the ferroelectric signals. Here, we show that the …
The phase transition behaviour of PbTiO3 and BaTiO3 under (111) epitaxial strain is investigated using density-functional theory calculations. From tensile strains of +0.015 to compressive strains of -0.015, PbTiO3 undergoes phase transitions from C2 through two Cm phases and then to R3m. The total polarisation is found to be almost independent of strain. For the same range of strains BaTiO3 undergoes phase transitions from a single Cm phase, through R3m and then to R-3m. In this case the application of compressive strain inhibits and then completely suppresses the polarisation on transition t…
Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramic exhibits excellent dielectric, ferroelectric and piezoelectric properties at the Morphotropic Phase Boundary (MPB). Previously, we demonstrated that the use of the anionic surfactant Sodium Dodecyl Sulfate (SDS, NaC12H25SO4) could enhance the dielectric properties of BCZT ceramic using surfactant-assisted solvothermal processing [1]. In the present study, structural, dielectric, ferroelectric properties, as well as electrocaloric effect and energy storage performances of this BCZT ceramic were thoroughly investigated. X-ray diffraction (XRD) …
Previous studies of Barkhausen noise in PZT have been limited to the energy spectrum (slew rate response voltages versus time), showing agreement with avalanche models; in barium titanate other exponents have been measured acoustically, but only at ambient temperatures. In the present study we report the Omori exponent (-0.95$\pm$0.03) for aftershocks in PZT and extend the barium titanate studies to a wider range of temperature.
The elastic response of BaTiO$_3$ single crystals during electric field cycling at room temperature has been studied using in-situ Resonant Ultrasound Spectroscopy (RUS), which allows monitoring of both the elastic and anelastic changes caused by ferroelectric polarization switching. We find that the first ferroelectric switching of a virgin single crystal is dominated by ferroelastic 90° switching. In subsequent ferroelectric switching, ferroelastic switching is reduced by domain pinning and by the predominance of 180° ferroelectric domains, as confirmed by polarized light microscopy. RUS und…
Lead-free ba0.85ca0.15zr0.1ti0.9o3 (bczt) ceramic powders were synthesized using the sol-gel method. to achieve high-energy storage and large electrocaloric effect in bulk ceramics the ceramics thickness was reduced. dielectric, ferroelectric, energy storage, and electrocaloric properties were investigated for bczt ceramic with 400 μm. here, pure crystalline structure and homogenous microstructure were identified by xrd analysis and sem measurements, respectively. the dielectric measurements revealed a maximum dielectric constant associated with ferroelectric-paraelectric phase transition. the…
The emerging interest in two-dimensional electron gases (2DEGs), formed at interfaces between two insulating oxide perovskites poses crucial fundamental question in view of future electronic devices. In the framework of density-functional theory, we investigate the possibility to control the characteristics of the 2DEG formed at the LaInO$_3$/BaSnO$_3$ interface by including a ferroelectric BaTiO$_3$ layer. To do so, we examine how the orientation of the ferroelectric polarization impacts density and confinement of the 2DEG. We find that aligning the ferroelectric polarization toward (outward)…
