Because of its novel physical properties, two-dimensional materials have attracted great attention. From first-principle calculations and vibration frequenceis analysis, we predict a new family of two-dimensional materials based on the idea of octet stability: honeycomb lattices of pnictogens (N, P, As, Sb, Bi). The buckled structures of materials come from the sp3 hybridization. These materials have indirect band gap ranging from 0.43eV to 3.7eV. From the analysis of projected density of states, we argue that the s and p orbitals together are sufficient to describe the electronic structure under tight-binding model, and the tight-binding parameters are obtained by fitting the band structures to first-principle results. Surprisingly large on-site spin-orbit coupling is found for all the pnictogen lattices except nitrogen. Investigation on the electronic structures of both zigzag and armchair nanoribbons reveals the possible existence of spin-polarized ferromagnetic edge states in some cases, which are rare in one-dimensional systems. These edge states and magnetism may exist under the condition of high vaccum and low temperature. This new family of materials would have promising applications in electronics, optics, sensors, and solar cells.
In our previous study, we have predicted the novel two-dimensional honeycomb monolayers of pnictogen. In particular, the structure and properties of the honeycomb monolayer of nitrogen, which we call nitrogene, are very unusual. In this paper, we make an in-depth investigation of its electronic structure. We find that the band structure of nitrogene can be engineered in several ways: controlling the stacking of monolayers, application of biaxial tensile strain, and application of perpendicular electric field. The band gap of nitrogene is found to decrease with the increasing number of layers. …
We investigate the field emission properties of nitrogenated and boronated carbon nanotubes using time-dependent density functional theory, were the wave function propagation is performed using the Crank-Nicholson algorithm. We extract the current-voltage characteristics of the emitted electrons from nanotubes with different doping configurations. We found that boron doping either impedes, or slightly enhances, field emission. Nitrogen strongly influences the emission current, and the current is sensitive to the location of the nitrogen dopant in the nanotube. The emitted charge cloud from nit…
We present a first-principles study of the atomic, electronic, and magnetic properties of two-dimensional (2D), single and bilayer ZnO in honeycomb structure and its armchair and zigzag nanoribbons. In order to reveal the dimensionality effects, our study includes also bulk ZnO in wurtzite, zincblende, and hexagonal structures. The stability of 2D ZnO, its nanoribbons and flakes are analyzed by phonon frequency, as well as by finite temperature ab initio molecular-dynamics calculations. 2D ZnO in honeycomb structure and its armchair nanoribbons are nonmagnetic semiconductors but acquire net ma…
Nanometric inclusions filled with nitrogen, located adjacent to FenN (n = 3 or 4) nanocrystals within (Ga,Fe)N layers, are identified and characterized using scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS). High-resolution STEM images reveal a truncation of the Fe-N nanocrystals at their boundaries with the nitrogen-containing inclusion. A controlled electron beam hole drilling experiment is used to release nitrogen gas from an inclusion in situ in the electron microscope. The density of nitrogen in an individual inclusion is measured to be 1.4 +- …
Search for low-dimensional materials with unique electronic properties is important for the development of electronic devices in nano scale. Through systematic first-principles calculations, we found that the band gaps of the two-dimensional honeycomb monolayers and one-dimensional single-walled nanotubes of IIB-VI semiconductors (ZnO, CdO, ZnS and CdS) are nearly chirality-independent and weakly diameter-dependent. Based on analysis of the electronic structures, it was found that the conduction band minimum is contributed by the spherically symmetric $s$ orbitals of cations and the valence ba…
Nitrogen doped single wall carbon nanotubes have many functional benefits. Doping opens the possibility to control the electronic energy levels, surface energy, surface reactivity and charge carrier density. The additional electron in the outer shell changes the electronic properties of the nanotubes when introduced into the carbon lattice. Here we present the latest findings in the in-situ doping during synthesis of single wall carbon nanotubes using caffeine as a precursor of both carbon and nitrogen. A special furnace with two heating elements allowed us to sublimate and decompose the solid…
Quasi one-dimensional nanoribbons are excellent candidates for nanoelectronics, therefore here we investigate by means of density functional theory the structure and electronic properties of a new kind of 1D ribbons, namely: centered honeycomb NiSe2 nanoribbons. Depending on the crystallography and atomic composition of the edges, these ribbons can belong to one of six (two) zigzag (armchair) families. In the zigzag families, after edge reconstruction, all the bare ribbons are metallic. The influence of edge hydrogen passivation produces band gaps in two of the six families. For the armchair n…
In the purpose of expanding the family of two-dimensional materials, we predict the existence of two-dimensional octa-structure of nitrogen group elements that are composed of squares and octagons in first-principle method based on density functional theory (DFT). From our calculations, electronic structures of all monolayers show that they are semiconductors with indirect (N, P, Bi) and direct (As, Sb) band gaps (0.57-2.61eV). Nano-ribbons of three different unpassivated edges and their band structures are also investigated. Because of the reconstruction on the edges and dangling bonds, there…
We have performed ab initio calculations to systematically investigate electronic properties and magnetism of insulating non-magnetic beryllium monoxide nanotubes induced by non-magnetic sp impurities: boron, carbon and nitrogen. We found that in the presence of these sp impurities, which replace oxygen atoms, the non-magnetic BeO NTs transform into magnetic semiconductors, which acquire magnetization caused by spin splitting of (B,C,N) 2p states located in the forbidden gap of a BeO tube. The magnetic moments of the impurities vary from 0.65 to 1.60. On the contrary, when (B,C,N) dopants subs…
This study of elastic and plastic deformation of graphene, silicene, and boron nitride (BN) honeycomb nanoribbons under uniaxial tension determines their elastic constants and reveals interesting features. In the course of stretching in the elastic range, the electronic and magnetic properties can be strongly modified. In particular, it is shown that the band gap of a specific armchair nanoribbon is closed under strain and highest valance and lowest conduction bands are linearized. This way, the massless Dirac fermion behavior can be attained even in a semiconducting nanoribbon. Under plastic …
Based on first-principles calculations of structure optimization, phonon modes and finite temperature molecular dynamics, we predict that silicon and germanium have stable, two-dimensional, low-buckled, honeycomb structures. Similar to graphene, they are ambipolar and their charge carriers can behave like a massless Dirac fermions due to their pi- and pi*-bands which are crossed linearly at the Fermi level. In addition to these fundamental properties, bare and hydrogen passivated nanoribbons of Si and Ge show remarkable electronic and magnetic properties, which are size and orientation depende…
Graphene, a flat monolayer of carbon atoms tightly packed into a two-dimensional honeycomb lattice (a one atom thick graphite sheet), is presently the hottest material in nanoscience and nanotechnology. Its challenging hypothetical reflection in the silicon world is coined silicene; Here, we have demonstrated that the silicon nano-wires self-aligned in a massively parallel array recently observed by STM on Ag(110), are true silicene nano-ribbons. Our calculations using density functional theory clearly show that Si atoms tends to form hexagons on top the silver substrate in a honeycomb, graphe…
We present a first-principles study of bare and hydrogen passivated armchair nanoribbons of the puckered single layer honeycomb structures of silicon and germanium. Our study includes optimization of atomic structure, stability analysis based on the calculation of phonon dispersions, electronic structure and the variation of band gap with the width of the ribbon. The band gaps of silicon and germanium nanoribbons exhibit family behavior similar to those of graphene nanoribbons. The edges of bare nanoribbons are sharply reconstructed, which can be eliminated by the hydrogen termination of dangl…
We investigated the growth of titanium oxide two-dimensional (2D) nanostructures on Au(111), produced by Ti evaporation and post-deposition oxidation. Scanning tunneling microscopy and spectroscopy (STM and STS) and low-energy electron diffraction (LEED) measurements characterized the morphological, structural and electronic properties of the observed structures. Five distinct TiO\sub{x} phases were identified: the \emph{honeycomb} and \emph{pinwheel} phases appear as monolayer films wetting the gold surface, while nanocrystallites of the \emph{triangular}, \emph{row} and \emph{needle} phases …
Prompted by recent reports on $\sqrt{3} \times \sqrt{3}$ graphene superlattices with intrinsic inter-valley interactions, we perform first-principles calculations to investigate the electronic properties of periodically nitrogen-doped graphene and carbon nanotube nanostructures. In these structures, nitrogen atoms substitute one-sixth of the carbon atoms in the pristine hexagonal lattices with exact periodicity to form perfect $\sqrt{3} \times \sqrt{3}$ superlattices of graphene and carbon nanotubes. Multiple nanostructures of $\sqrt{3} \times \sqrt{3}$ graphene ribbons and carbon nanotubes ar…
Quantum confinement and interference often generate exotic properties in nanostructures. One recent highlight is the experimental indication of a magnetic phase transition in zigzag-edged graphene nanoribbons at the critical ribbon width of about 7 nm [G. Z. Magda et al., Nature \textbf{514}, 608 (2014)]. Here we show theoretically that with further increase in the ribbon width, the magnetic correlation of the two edges can exhibit an intriguing oscillatory behavior between antiferromagnetic and ferromagnetic, driven by acquiring the positive coherence between the two edges to lower the free e…
The advent of nanotechnology has hurtled the discovery and development of nanostructured materials with stellar chemical and physical functionalities in a bid to address issues in energy, environment, telecommunications and healthcare. In this quest, a class of two-dimensional layered materials consisting of alkali or coinage metal atoms sandwiched between slabs exclusively made of transition metal and chalcogen (or pnictogen) atoms arranged in a honeycomb fashion have emerged as materials exhibiting fascinatingly rich crystal chemistry, high-voltage electrochemistry, fast cation diffusion bes…
In this paper, we have analysed the electronic and mechanical properties of Nitrogen(N) doped (6,1) SWCNTs based on first-principles and Molecular dynamic (MD) simulation. A schematic N-doping on SWCNT was performed along zigzag(zz) and armchair(ac) direction. Armchair doping is considered parallel to the tube axis while the zigzag is along the cross-section perpendicular to the tube axis. In doping pattern (both zz and ac) we have observed the variation in electronic properties for even number of N-doping and odd number of N-doping. To study the mechanical properties we have adopted ab-initio…
Endowed with a multitude of exquisite properties such as rich electrochemistry, superb topology and eccentric electromagnetic phenomena, honeycomb layered oxides have risen to the top echelons of science with applications in diverse fields ranging from condensed matter physics, solid-state chemistry, materials science, solid-state ionics to electrochemistry. However, these oxides are vastly underutilised as their underlying atomistic mechanisms remain unexplored. Therefore, in this study, atomic-resolution imaging on pristine $\rm K_2Ni_2TeO_6$ along multiple zone axes was conducted using sphe…
Unprecedented and fascinating phenomena have been recently observed at oxide interfaces between centrosymmetric cubic materials, such as LaAlO$_3$ and SrTiO$_3$, where a polar discontinuity across the boundary gives rise to polarization charges and electric fields that drive a metal-insulator transition, with the appearance of free carriers at the interface. Two-dimensional analogues of these systems are possible, and honeycomb lattices could offer a fertile playground, thanks to their versatility and the extensive on-going experimental efforts in graphene and related materials. Here we sugges…
Nanocomposite metal oxide thin films exhibit assuring qualities in the field of gas sensors because of the collective opportunities provided by the heterointerface formation. In this work, we present the synthesis of nitrogen doped mesoporous In$_2$O$_3$-ZnO nano-composite thin films by simple wet chemical method using urea as the nitrogen precursor. SEM investigation suggests formation of mesoporous nano-composite thin films, where the uniformity of surface pore distribution depends on the relative proportion of In$_2$O$_3$ and ZnO in the composites. HRTEM investigation suggest formation of s…
Using microwave-assisted plasma chemical vapour deposition (CVD) a layer of Nitrogen doped ultra-nano-crystalline diamond (N-UNCD) is deposited on top of a non-conducting diamond layer, which itself is situated on a Silicon wafer. This structure is then shaped into Hall-bar devices of various dimensions using optical lithography and dry-etching techniques. The devices' electrical properties are investigated at various temperatures using a cryogen-free dilution refrigerator.
We present ab initio calculations which show that the direct-band-gap, effective masses and Fermi velocities of charge carriers in ZnO monolayer (ML-ZnO) in graphene-like honeycomb structure are all tunable by application of in-plane homogeneous biaxial strain. Within our simulated strain limit of $\pm 10$%, the band gap remains direct and shows a strong non-linear variation with strain. Moreover, the average Fermi velocity of electrons in unstrained ML-ZnO is of the same order of magnitude as that in graphene. The results promise potential applications of ML-ZnO in mechatronics/straintronics …
Evidence of a two-dimensional nitrogen crystalline structure on silver surfaces
Institute of Physics, Chinese Academy of Sciences（中国科学院物理研究所）；School of Physical Sciences, University of Chinese Academy of Sciences（中国科学院大学物理科学学院）；Max Planck Institute of Microstructure Physics（马克斯·普朗克微观结构物理研究所）；Songshan Lake Materials Laboratory（松山湖材料实验室）
Spin $\frac{1}{2}$ honeycomb materials have gained substantial interest due to their exotic magnetism and possible application in quantum computing. However, in all current materials out-of-plane interactions are interfering with the in-plane order, hence a true 2D magnetic honeycomb system is still of demand. Here, we report the exfoliation of the magnetic semiconductor $α$-RuCl$_3$ into the first halide monolayers and the magnetic characterization of the spin $\frac{1}{2}$ honeycomb arrangement of turbostratically stacked RuCl$_3$ monolayers. The exfoliation is based on a reductive lithiatio…
We present a study of mechanical, electronic and magnetic properties of two dimensional (2D), monolayer of silicon carbide (SiC) in honeycomb structure and its quasi 1D armchair nanoribbons using first-principles plane wave method. In order to reveal dimensionality effects, a brief study of 3D bulk and 1D atomic chain of SiC are also included. Calculated bond-lengths, cohesive energies, charge transfers and band gaps display a clear dimensionality effect. The stability analysis based on the calculation of phonon frequencies indicates that 2D SiC monolayer is stable in planar geometry. We found…
Detailed structural and electrical properties of ultra-nano-crystalline diamond (UNCD) films grown in H$_\text{2}$/CH$_\text{4}$/N$_\text{2}$ plasma were systematically studied as a function of deposition temperature ($T_d$) and nitrogen content ($\%$ N$_2$) to thoroughly evaluate their effects on conductivity. $T_d$ was scanned from 1000 to 1300 K for N$_2$ fixed at 0, 5, 10 and 20 $\%$. It was found that even the films grown in the synthetic gas mixture with no nitrogen could be made as conductive as 1$-$10$^{-2}$ $Ω$ cm with overall resistivity of all the films tuned over 4 orders of magnit…
Powered by the mutual developments in instrumentation, materials andtheoretical descriptions, sensing and imaging capabilities of quantum emitters insolids have significantly increased in the past two decades. Quantum emitters insolids, whose properties resemble those of atoms and ions, provide alternative waysto probing natural and artificial nanoscopic systems with minimum disturbance andultimate spatial resolution. Among those emerging quantum emitters, the nitrogen-vacancy (NV) color center in diamond is an outstanding example due to its intrinsicproperties at room temperature (highly-lumi…
We have made a systematic theoretical study to determine which are the most stable structures for substitutional nitrogen defects in carbon nanotubes, by making total energy calculations via DFT. These calculations were made for a (5,5) and a (8,0) nanotube to check the influence of chirality and for a graphene sheet, to check the limit of infinite diameter. In all these systems, we found that either substitutional nitrogen or structures containing two vacancies surrounded by four pyridine-like rings have the lowest formation energy, depending on the value of the nitrogen chemical potential. T…
Theoretical progress in graphene physics has largely relied on the application of a simple nearest-neighbor tight-binding model capable of predicting many of the electronic properties of this material. However, important features that include electron-hole asymmetry and the detailed electronic bands of basic graphene nanostructures (e.g., nanoribbons with different edge terminations) are beyond the capability of such simple model. Here we show that a similarly simple plane-wave solution for the one-electron states of an atom-based two-dimensional potential landscape, defined by a single fittin…
In this work, a trial understanding for the physics underling the construction of exchange (hopping) matrix $\mathbf{E}$ in Heisenberg model (tight binding model) for 2D materials is done. It is found that the $\mathbf{E}$ matrix describes the particles exchange flow under short range (nearest neighbor) hopping interaction which is effected by the lattice geometry. This understanding is then used to explain the dispersion relations for the 2D honeycomb lattice with zigzag and armchair edges obtained for graphene nanoribbons and magnetic stripes. It is found that the particle flow by hopping in…
We employ first-principles calculations based density-functional-theory (DFT) approach to study electronic properties of partially and fully edge-hydrogenated armchair boron-nitrogen-carbon (BNC) nanoribbons (ABNCNRs), with widths between 0.85 nm to 2.3 nm. Due to the partial passivation of edges, electrons which do not participate in the bonding, form new energy states located near the Fermi-level. Because of these additional bands, some ABNCNRs exhibit metallic behavior, which is quite uncommon in armchair nanoribbons. Our calculations reveal that the metallic behavior is observed for the fo…
