The complexity-performance trade-off is a fundamental aspect of the design of low-density parity-check (LDPC) codes. In this paper, we consider LDPC codes for the binary erasure channel (BEC), use code rate for performance metric, and number of decoding iterations to achieve a certain residual erasure probability for complexity metric. We first propose a quite accurate approximation of the number of iterations for the BEC. Moreover, a simple but efficient utility function corresponding to the number of iterations is developed. Using the aforementioned approximation and the utility function, two optimization problems w.r.t. complexity are formulated to find the code degree distributions. We show that both optimization problems are convex. In particular, the problem with the proposed approximation belongs to the class of semi-infinite problems which are computationally challenging to be solved. However, the problem with the proposed utility function falls into the class of semi-definite programming (SDP) and thus, the global solution can be found efficiently using available SDP solvers. Numerical results reveal the superiority of the proposed code design compared to existing code designs from literature.
We derive a new fast convergent Density Evolution algorithm for finding optimal rate Low-Density Parity-Check (LDPC) codes used over the binary erasure channel (BEC). The fast convergence property comes from the modified Density Evolution (DE), a numerical method for analyzing the behavior of iterative decoding convergence of a LDPC code. We have used the method of [16] for designing of a LDPC code with optimal rate. This has been done for a given parity check node degree distribution, erasure probability and specified DE constraint. The fast behavior of DE and found optimal rate with this met…
In this paper, we focus on decoding nonbinary low-density parity-check (LDPC) codes in Galois fields of characteristic two via the proximal alternating direction method of multipliers (proximal-ADMM). By exploiting Flanagan/Constant-Weighting embedding techniques and the decomposition technique based on three-variables parity-check equations, two efficient proximal-ADMM decoders for nonbinary LDPC codes are proposed. We show that both of them are theoretically guaranteed convergent to some stationary point of the decoding model and either of their computational complexities in each proximal-AD…
A three terminal relay system with binary erasure channel (BEC) was considered, in which a source forwarded information to a destination with a relay's "assistance". The nested LDGM (Low-density generator-matrix) -LDPC (low-density parity-check) was designed to realize Compress-and-forward (CF) at the relay. LDGM coding compressed the received signals losslessly and LDPC realized the binning for Slepian-Wolf coding. Firstly a practical coding scheme was proposed to achieve the cut-set bound on the capacity of the system, employing LDPC and Nested LDGM-LDPC codes at the source and relay respect…
In this paper, we introduce an efficient iterative solver for the joint linear-programming (LP) decoding of low-density parity-check (LDPC) codes and finite-state channels (FSCs). In particular, we extend the approach of iterative approximate LP decoding, proposed by Vontobel and Koetter and explored by Burshtein, to this problem. By taking advantage of the dual-domain structure of the joint decoding LP, we obtain a convergent iterative algorithm for joint LP decoding whose structure is similar to BCJR-based turbo equalization (TE). The result is a joint iterative decoder whose complexity is s…
The design of low-density parity-check (LDPC) code ensembles optimized for a finite number of decoder iterations is investigated. Our approach employs EXIT chart analysis and differential evolution to design such ensembles for the binary erasure channel and additive white Gaussian noise channel. The error rates of codes optimized for various numbers of decoder iterations are compared and it is seen that in the cases considered, the best performance for a given number of decoder iterations is achieved by codes which are optimized for this particular number. The design of generalized LDPC (GLDPC…
Irregular repeat-accumulate Root-Check LDPC codes based on Progressive Edge Growth (PEG) techniques for block-fading channels are proposed. The proposed Root-Check LDPC codes are {both suitable for channels under $F = 2, 3$ independent fadings per codeword and} for fast fading channels. An IRA(A) Root-Check structure is devised for $F = 2, 3$ independent fadings. The performance of the new codes is investigated in terms of the Frame Error Rate (FER). Numerical results show that the IRAA LDPC codes constructed by the proposed algorithm {outperform by about 1dB the existing} IRA Root-Check LDPC …
Despite the NP hardness of acquiring minimum distance $d_m$ for linear codes theoretically, in this paper we propose one experimental method of finding minimum-weight codewords, the weight of which is equal to $d_m$ for LDPC codes. One existing syndrome decoding method, called serial belief propagation (BP) with ordered statistic decoding (OSD), is adapted to serve our purpose. We hold the conjecture that among many candidate error patterns in OSD reprocessing, modulo 2 addition of the lightest error pattern with one of the left error patterns may generate a light codeword. When the decoding s…
In this paper, we present a fast min-sum algorithm for decoding LDPC codes over GF(q). Our algorithm is different from the one presented by David Declercq and Marc Fossorier in ISIT 05 only at the way of speeding up the horizontal scan in the min-sum algorithm. The Declercq and Fossorier's algorithm speeds up the computation by reducing the number of configurations, while our algorithm uses the dynamic programming instead. Compared with the configuration reduction algorithm, the dynamic programming one is simpler at the design stage because it has less parameters to tune. Furthermore, it does …
Many implementations for decoding LDPC codes are based on the (normalized/offset) min-sum algorithm due to its satisfactory performance and simplicity in operations. Usually, each iteration of the min-sum algorithm contains two scans, the horizontal scan and the vertical scan. This paper presents a single-scan version of the min-sum algorithm to speed up the decoding process. It can also reduce memory usage or wiring because it only needs the addressing from check nodes to variable nodes while the original min-sum algorithm requires that addressing plus the addressing from variable nodes to ch…
We propose iterative detection and decoding (IDD) algorithms with Low-Density Parity-Check (LDPC) codes for Multiple Input Multiple Output (MIMO) systems operating in block-fading and fast Rayleigh fading channels. Soft-input soft-output minimum mean-square error receivers with successive interference cancellation are considered. In particular, we devise a novel strategy to improve the bit error rate (BER) performance of IDD schemes, which takes into account the soft \textit{a posteriori} output of the decoder in a block-fading channel when Root-Check LDPC codes are used. A MIMO IDD receiver w…
We modified Cole's Importance Sampling (IS) method for enumerating of Trapping Sets (TS, asymmetric subgraphs) causing an error under message-passing decoder. Proposed Cole's IS modifications based on combination of several ideas: parallel TS impulse tree decomposition using unwrapping of message passing iterations, according short cycles dense and straightforward idea of Tanner Graph/ Forney's Normal Graph symmetry - Graph Authomorphism. Its allowed superior Velasquez-Subramani and Karimi-Banihashemi TS enumerating methods. Particularly proposed method under PEG (1008, 504) Mackay code for si…
We propose an Iterative Detection and Decoding (IDD) scheme with Low Density Parity Check (LDPC) codes for Multiple Input Multiple Output (MIMO) systems for block-fading $F = 2$ and fast fading Rayleigh channels. An IDD receiver with soft information processing that exploits the code structure and the behaviour of the log likelihood ratios (LLR)'s is developed. Minimum Mean Square Error (MMSE) with Successive Interference Cancellation (SIC) and with Parallel Interference Cancellation (PIC) schemes are considered. The soft \textit{a posteriori} output of the decoder in a block-fading channel wi…
In this paper, we present a low-complexity joint detection-decoding algorithm for nonbinary LDPC codedmodulation systems. The algorithm combines hard-decision decoding using the message-passing strategy with the signal detector in an iterative manner. It requires low computational complexity, offers good system performance and has a fast rate of decoding convergence. Compared to the q-ary sum-product algorithm (QSPA), it provides an attractive candidate for practical applications of q-ary LDPC codes.
Low-Density Parity-Check (LDPC) codes received much attention recently due to their capacity-approaching performance. The iterative message-passing algorithm is a widely adopted decoding algorithm for LDPC codes \cite{Kschischang01}. An important design issue for LDPC codes is designing codes with fast decoding speed while maintaining capacity-approaching performance. In another words, it is desirable that the code can be successfully decoded in few number of decoding iterations, at the same time, achieves a significant portion of the channel capacity. Despite of its importance, this design is…
We study the performance of binary spatially-coupled low-density parity-check codes (SC-LDPC) when used with bit-interleaved coded-modulation (BICM) schemes. This paper considers the cases when transmission takes place over additive white Gaussian noise (AWGN)channels and Rayleigh fast-fading channels. The technique of upper bounding the maximum-a-posteriori (MAP) decoding performance of LDPC codes using an area theorem is extended for BICM schemes. The upper bound is computed for both the optimal MAP demapper and the suboptimal max-log-MAP (MLM) demapper. It is observed that this bound approa…
Due to the speed limitation of the conventional bit-chosen strategy in the existing weighted bit flipping algorithms, a high-speed LDPC decoder cannot be realized. To solve this problem, we propose a fast weighted bit flipping (FWBF) algorithm. Specifically, based on the stochastic error bitmap of the received vector, a partially parallel bit-choose strategy is adopted to lower the delay of choosing the bit flipped. Because of its partially parallel structure, the novel strategy can be well incorporated into the LDPC decoder [1]. The analysis of the decoding delay demonstrates that, the decodi…
Sparse code multiple access (SCMA) is an emerging paradigm for efficient enabling of massive connectivity in future machine-type communications (MTC). In this letter, we conceive the uplink transmissions of the low-density parity check (LDPC) coded SCMA system. Traditional receiver design of LDPC-SCMA system, which is based on message passing algorithm (MPA) for multiuser detection followed by individual LDPC decoding, may suffer from the drawback of the high complexity and large decoding latency, especially when the system has large codebook size and/or high overloading factor. To address thi…
Minimum distance is an important parameter of a linear error correcting code. For improved performance of binary Low Density Parity Check (LDPC) codes, we need to have the minimum distance grow fast with n, the codelength. However, the best we can hope for is a linear growth in dmin with n. For binary LDPC codes, the necessary and sufficient conditions on the LDPC ensemble parameters, to ensure linear growth of minimum distance is well established. In the case of non-binary LDPC codes, the structure of logarithmic weight codewords is different from that of binary codes. We have carried out a p…
In this paper, we present a novel way for solving the main problem of designing the capacity approaching irregular low-density parity-check (LDPC) code ensemble over binary erasure channel (BEC). The proposed method is much simpler, faster, accurate and practical than other methods. Our method does not use any relaxation or any approximate solution like previous works. Our method works and finds optimal answer for any given check node degree distribution. The proposed method was implemented and it works well in practice with polynomial time complexity. As a result, we represent some degree dis…
Quasi-cyclic (QC) low-density parity-check (LDPC) codes which are known as QC-LDPC codes, have many applications due to their simple encoding implementation by means of cyclic shift registers. In this paper, we construct QC-LDPC codes from group rings. A group ring is a free module (at the same time a ring) constructed in a natural way from any given ring and any given group. We present a structure based on the elements of a group ring for constructing QC-LDPC codes. Some of the previously addressed methods for constructing QC-LDPC codes based on finite fields are special cases of the proposed…
This paper consists of three parts. The first part presents a large class of new binary quasi-cyclic (QC)-LDPC codes with girth of at least 6 whose parity-check matrices are constructed based on cyclic subgroups of finite fields. Experimental results show that the codes constructed perform well over the binary-input AWGN channel with iterative decoding using the sum-product algorithm (SPA). The second part analyzes the ranks of the parity-check matrices of codes constructed based on finite fields with characteristic of 2 and gives combinatorial expressions for these ranks. The third part ident…
In this paper, we consider quantized decoding of LDPC codes on the binary symmetric channel. The binary message passing algorithms, while allowing extremely fast hardware implementation, are not very attractive from the perspective of performance. More complex decoders such as the ones based on belief propagation exhibit superior performance but lead to slower decoders. The approach in this paper is to consider message passing decoders that have larger message alphabet (thereby providing performance improvement) as well as low complexity (thereby ensuring fast decoding). We propose a class of …
Communication over the binary erasure channel (BEC) using low-density parity-check (LDPC) codes and belief propagation (BP) decoding is considered. The average bit error probability of an irregular LDPC code ensemble after a fixed number of iterations converges to a limit, which is calculated via density evolution, as the blocklength $n$ tends to infinity. The difference between the bit error probability with blocklength $n$ and the large-blocklength limit behaves asymptotically like $α/n$, where the coefficient $α$ depends on the ensemble, the number of iterations and the erasure probability …
Layered decoding is well appreciated in Low-Density Parity-Check (LDPC) decoder implementation since it can achieve effectively high decoding throughput with low computation complexity. This work, for the first time, addresses low complexity column-layered decoding schemes and VLSI architectures for multi-Gb/s applications. At first, the Min-Sum algorithm is incorporated into the column-layered decoding. Then algorithmic transformations and judicious approximations are explored to minimize the overall computation complexity. Compared to the original column-layered decoding, the new approach ca…
In this letter, we propose a two-stage design method to construct memory efficient mutual information-maximizing quantized min-sum (MIM-QMS) decoder for rate-compatible low-density parity-check (LDPC) codes. We first develop a modified density evolution to design a unique set of lookup tables (LUTs) that can be used for rate-compatible LDPC codes. The constructed LUTs are optimized based on their discrepancy values and a merge function to reduce the memory requirement. Numerical results show that the proposed rate-compatible MIM-QMS decoder can reduce the memory requirement for decoding by up …
To reduce the implementation complexity of a belief propagation (BP) based low-density parity-check (LDPC) decoder, shuffled BP decoding schedules, which serialize the decoding process by dividing a complete parallel message-passing iteration into a sequence of sub-iterations, have been proposed. The so-called group horizontal shuffled BP algorithm partitions the check nodes of the code graph into groups to perform group-by-group message-passing decoding. This paper proposes a new grouping technique to accelerate the message-passing rate. Performance of the proposed algorithm is analyzed by a …
In this paper, we propose a framework of the mutual information-maximizing (MIM) quantized decoding for low-density parity-check (LDPC) codes by using simple mappings and fixed-point additions. Our decoding method is generic in the sense that it can be applied to LDPC codes with arbitrary degree distributions, and can be implemented based on either the belief propagation (BP) algorithm or the min-sum (MS) algorithm. In particular, we propose the MIM density evolution (MIM-DE) to construct the lookup tables (LUTs) for the node updates. The computational complexity and memory requirements are di…
This paper presents an efficient algorithm for finding the dominant trapping sets of a low-density parity-check (LDPC) code. The algorithm can be used to estimate the error floor of LDPC codes or to be part of the apparatus to design LDPC codes with low error floors. For regular codes, the algorithm is initiated with a set of short cycles as the input. For irregular codes, in addition to short cycles, variable nodes with low degree and cycles with low approximate cycle extrinsic message degree (ACE) are also used as the initial inputs. The initial inputs are then expanded recursively to domina…
Continuous-variable quantum key distribution utilizes an ensemble of coherent states of light to distribute secret encryption keys between two parties. One of the challenges is thereby the requirement of capacity approaching error correcting codes in the low signal-to-noise (SNR) regime (SNR < 0 dB). Multilevel coding (MLC) combined with multistage decoding (MSD) can solve this challenge in combination with multi-edge-type low-density parity-check (MET-LDPC) codes which are ideal for low code rates in the low SNR regime due to degree-one variable nodes. However, the complexity of designing suc…
In this paper, we introduce a new practical and general method for solving the main problem of designing the capacity approaching, optimal rate, irregular low-density parity-check (LDPC) code ensemble over binary erasure channel (BEC). Compared to some new researches, which are based on application of asymptotic analysis tools out of optimization process, the proposed method is much simpler, faster, accurate and practical. Because of not using any relaxation or any approximate solution like previous works, the found answer with this method is optimal. We can construct optimal variable node deg…
This paper considers the joint-decoding (JD) problem for finite-state channels (FSCs) and low-density parity-check (LDPC) codes. In the first part, the linear-programming (LP) decoder for binary linear codes is extended to JD of binary-input FSCs. In particular, we provide a rigorous definition of LP joint-decoding pseudo-codewords (JD-PCWs) that enables evaluation of the pairwise error probability between codewords and JD-PCWs in AWGN. This leads naturally to a provable upper bound on decoder failure probability. If the channel is a finite-state intersymbol interference channel, then the join…
The McEliece cryptosystem is a public-key cryptosystem based on coding theory that has successfully resisted cryptanalysis for thirty years. The original version, based on Goppa codes, is able to guarantee a high level of security, and is faster than competing solutions, like RSA. Despite this, it has been rarely considered in practical applications, due to two major drawbacks: i) large size of the public key and ii) low transmission rate. Low-Density Parity-Check (LDPC) codes are state-of-art forward error correcting codes that permit to approach the Shannon limit while ensuring limited compl…
In this paper, we construct protograph-based spatially coupled low-density parity-check (SC-LDPC) codes by coupling together a series of L disjoint, or uncoupled, LDPC code Tanner graphs into a single coupled chain. By varying L, we obtain a flexible family of code ensembles with varying rates and frame lengths that can share the same encoding and decoding architecture for arbitrary L. We demonstrate that the resulting codes combine the best features of optimized irregular and regular codes in one design: capacity approaching iterative belief propagation (BP) decoding thresholds and linear gro…
Ultra-reliable low-latency communication (URLLC) requires short packets of data transmission. It is known that when the packet length becomes short, the achievable rate is subject to a penalty when compared to the channel capacity. In this paper, we propose to use faster-than-Nyquist (FTN) signaling to compensate for the achievable rate loss of short packet communications. We investigate the performance of a combination of a low complexity detector of FTN signaling used with nonbinary low-density parity-check (NB-LDPC) codes that is suitable for low-latency and short block length requirements …
We consider spatially coupled low-density parity-check codes with finite smoothing parameters. A finite smoothing parameter is important for designing practical codes that are decoded using low-complexity windowed decoders. By optimizing the amount of coupling between spatial positions, we show that we can construct codes with excellent thresholds and small rate loss, even with the lowest possible smoothing parameter and large variable node degrees, which are required for low error floors. We also establish that the decoding convergence speed is faster with non-uniformly coupled codes, which w…
Nonbinary LDPC codes have shown superior performance close to the Shannon limit. Compared to binary LDPC codes of similar lengths, they can reach orders of magnitudes lower error rate. However, multitude of design freedoms of nonbinary LDPC codes complicates the practical code and decoder design process. Fast simulations are critically important to evaluate the pros and cons. Rapid prototyping on FPGA is attractive but takes significant design efforts due to its high design complexity. We propose a high-throughput reconfigurable hardware emulation architecture with decoder and peripheral co-de…
The recent development of deep learning methods provides a new approach to optimize the belief propagation (BP) decoding of linear codes. However, the limitation of existing works is that the scale of neural networks increases rapidly with the codelength, thus they can only support short to moderate codelengths. From the point view of practicality, we propose a high-performance neural min-sum (MS) decoding method that makes full use of the lifting structure of protograph low-density parity-check (LDPC) codes. By this means, the size of the parameter array of each layer in the neural decoder on…
This work presents a new code-based key encapsulation mechanism (KEM) called LEDAkem. It is built on the Niederreiter cryptosystem and relies on quasi-cyclic low-density parity-check codes as secret codes, providing high decoding speeds and compact keypairs. LEDAkem uses ephemeral keys to foil known statistical attacks, and takes advantage of a new decoding algorithm that provides faster decoding than the classical bit-flipping decoder commonly adopted in this kind of systems. The main attacks against LEDAkem are investigated, taking into account quantum speedups. Some instances of LEDAkem are…
For decoding non-binary low-density parity check (LDPC) codes, logarithm-domain sum-product (Log-SP) algorithms were proposed for reducing quantization effects of SP algorithm in conjunction with FFT. Since FFT is not applicable in the logarithm domain, the computations required at check nodes in the Log-SP algorithms are computationally intensive. What is worth, check nodes usually have higher degree than variable nodes. As a result, most of the time for decoding is used for check node computations, which leads to a bottleneck effect. In this paper, we propose a Log-SP algorithm in the Fourie…
This paper presents new FEC codes for the erasure channel, LDPC-Band, that have been designed so as to optimize a hybrid iterative-Maximum Likelihood (ML) decoding. Indeed, these codes feature simultaneously a sparse parity check matrix, which allows an efficient use of iterative LDPC decoding, and a generator matrix with a band structure, which allows fast ML decoding on the erasure channel. The combination of these two decoding algorithms leads to erasure codes achieving a very good trade-off between complexity and erasure correction capability.
Constructing quantum LDPC codes with a minimum distance that grows faster than a square root of the length has been a major challenge of the field. With this challenge in mind, we investigate constructions that come from high-dimensional expanders, in particular Ramanujan complexes. These naturally give rise to very unbalanced quantum error correcting codes that have a large $X$-distance but a much smaller $Z$-distance. However, together with a classical expander LDPC code and a tensoring method that generalises a construction of Hastings and also the Tillich-Zemor construction of quantum code…
In a digital communication system, information is sent from one place to another over a noisy communication channel. It may be possible to detect and correct errors that occur during the transmission if one encodes the original information by adding redundant bits. Low-density parity-check (LDPC) convolutional codes, a member of the LDPC code family, encode the original information to improve error correction capability. In practice these codes are used to decode very long information sequences, where the information arrives in subsequent packets over time, such as video streams. We consider t…
Spatially-Coupled (SC)-LDPC codes are known to have outstanding error-correction performance and low decoding latency. Whereas previous works on LDPC and SC-LDPC codes mostly take either an asymptotic or a finite-length design approach, in this paper we present a unified framework for jointly optimizing the codes' thresholds and cycle counts to address both regimes. The framework is based on efficient traversal and pruning of the code search space, building on the fact that the performance of a protograph-based SC-LDPC code depends on some characteristics of the code's partitioning matrix, whi…
University of Stuttgart（斯图加特大学）；Huawei Technologies Co., Ltd（华为技术有限公司）；Huawei Technologies Duesseldorf GmbH（华为技术杜塞尔多夫有限公司）
Finding optimal message quantization is a key requirement for low complexity belief propagation (BP) decoding. To this end, we propose a floating-point surrogate model that imitates quantization effects as additions of uniform noise, whose amplitudes are trainable variables. We verify that the surrogate model closely matches the behavior of a fixed-point implementation and propose a hand-crafted loss function to realize a trade-off between complexity and error-rate performance. A deep learning-based method is then applied to optimize the message bitwidths. Moreover, we show that parameter shar…
Quantum errors are primarily detected and corrected using the measurement of syndrome information which itself is an unreliable step in practical error correction implementations. Typically, such faulty or noisy syndrome measurements are modeled as a binary measurement outcome flipped with some probability. However, the measured syndrome is in fact a discretized value of the continuous voltage or current values obtained in the physical implementation of the syndrome extraction. In this paper, we use this "soft" or analog information without the conventional discretization step to benefit the i…
