Recent experiments showed that unity-order index change in a transparent conducting oxide (TCO) can be achieved in a metal-oxide-semiconductor (MOS) structure by accumulation charge. However, the ultrathin (~5nm) accumulation layer and inherent absorption of TCOs impede the practical applications of this effect. Herein, we propose and explore a novel waveguide, namely "TCO-slot waveguide", which combines both the tunable property of a TCO and field enhancement of a slot waveguide. In particular, light absorption can be sharply enhanced when the slot dielectric constant is tuned close to zero. Based on TCO-slot waveguides, efficient electro-absorption modulation can be achieved within 200 nm with small insertion loss.
Plasmonic-cavity Modulator for the Mid-IR with a Semi-transparent and Nonlinear Heavily-doped Semiconductor Mirror
Istituto Italiano di Tecnologia（意大利理工学院）；Istituto di Fotonica e Nanotecnologie, Consiglio Nazionale delle Ricerche（国家研究委员会光子和纳米技术研究所）；University of Luxembourg（卢森堡大学）；Institute for Advanced Studies, University of Luxembourg Campus Belval（卢森堡大学贝尔瓦尔校区高等研究院）；Centre de Nanosciences et de Nanotechnologies (C2N), CNRS UMR 9001, Universit´e Paris-Saclay（巴黎萨克雷大学CNRS 9001联合实验室纳米科学与纳米技术中心）
Here, we demonstrate a spectrally broadband, GHz-fast Mach-Zehnder interferometeric modulator, exhibiting a miniscule VpL of 95 V-um, deploying a sub-wavelength short electrostatically tunable plasmonic phase-shifter, based on heterogeneously integrated ITO thin films into silicon photonics.
We propose several planar layouts of ultra-compact plasmonic waveguide modulators that utilize alternative CMOS-compatible materials. The modulation is efficiently achieved by tuning the carrier concentration in a transparent conducting oxide layer, thereby tuning the waveguide either in plasmonic resonance or off-resonance. Resonance significantly increases the absorption coefficient of the plasmonic waveguide, which enables larger modulation depth. We show that an extinction ratio of 86 dB/um can be achieved, allowing for a 3-dB modulation depth in less than one micron at the telecommunicati…
Subwavelength modulators play an indispensable role in integrated photonic-electronic circuits. Due to weak light-matter interactions, it is always a challenge to develop a modulator with a nanometer scale footprint, low switching energy, low insertion loss and large modulation depth. In this paper, we propose the design of a vanadium dioxide dual-mode plasmonic waveguide electroabsorption modulator using a metal-insulator-VO$_2$-insulator-metal (MIVIM) waveguide platform. By varying the index of vanadium dioxide, the modulator can route plasmonic waves through the low-loss dielectric insulato…
We propose a plasmonic modulator with semiconductor gain material for optoelectronic integrated circuits. We analyze properties of a finite-thickness metal-semiconductor-metal (F-MSM) waveguide to be utilized as an ultra-compact and fast plasmonic modulator. The InP-based semiconductor core allows electrical control of signal propagation. By pumping the core we can vary the gain level and thus the transmittance of the whole system. The study of the device was made using both analytical approaches for planar two-dimensional case as well as numerical simulations for finite-width waveguides. We a…
Integrated ferroelectric plasmonic modulators featuring large bandwidths, broad optical operation range, resilience to high temperature and ultracompact footprint are introduced. Measurements show a modulation bandwidth of 70 GHz and a temperature stability up to 250°C. Mach-Zehnder interferometer modulators with 10-$μ$m-long phase shifters were operated at 116 Gbit/s PAM-4 and 72 Gbit/s NRZ. Wide and open eye diagrams with extinction ratios beyond 15 dB were found. The fast and robust devices are apt to an employment in industrial environments.
The authors' recent Nature Photonics article titled "Compact Nano-Mechanical Plasmonic Phase Modulators" [1] is reviewed which reports a new phase modulation principle with experimental demonstration of a 23 μm long non-resonant modulator having 1.5 π rad range with 1.7 dB excess loss at 780 nm. Analysis showed that by decreasing all dimensions, a low loss, ultra-compact π rad phase modulator is possible. Application of this type of nano-mechanical modulator in a miniature 2 x 2 switch is suggested and an optical design numerically validated. The footprint of the switch is 0.5 μm x 2.5 μm.
Optical modulators are required to have high modulation bandwidths and a compact footprint. In this paper we experimentally demonstrate a novel Si/In$_2$O$_3$ hybrid plasmonic waveguide modulator, which is realized by an asymmetric directional coupler (ADC) consisting of a silicon photonic waveguide and a Si/In$_2$O$_3$ hybrid plasmonic waveguide. The optical signal is modulated by radio-frequency (RF) signal applied on the Au electrodes at the top of MOS capacitor and contacting the In$_2$O$_3$ thin film. The record-high modulation bandwidth of >40 GHz is realized by a silicon-doping-free met…
We present a plasmonic modulator based on hybrid orthogonal silver junctions using vanadium dioxide as the modulating material on the silicon on insulator. The modulator has an ultra-compact footprint of 1.8μm x 1μm with a 100nm x 100nm modulating section based on the orthogonal geometry. We take advantage of large change in the refractive index of vanadium dioxide during its phase transition to achieve a high modulation depth of 46.89dB/μm. We also provide a fabrication strategy for the development of this device. The device geometry has potential applications in the development of next gener…
One of the technical barriers impeding the wide applications of integrated photonic circuits is the lack of ultracompact, high speed, broadband electro-optical (EO) modulators, which up-convert electronic signals into high bit-rate photonic data. In addition to direct modulation of lasers, EO modulators can be classified into (i) phase modulation based on EO effect or free-carrier injection, or (ii) absorption modulation based on Franz-Keldysh effect or quantum-confined Stark effect. Due to the poor EO properties of regular materials, a conventional EO modulator has a very large footprint. Bas…
We introduce phase-change material Ge2Sb2Te5 (GST) into metal-insulator-metal (MIM) waveguide systems to realize chipscale plasmonic modulators and switches in the telecommunication band. Benefitting from the high contrast of optical properties between amorphous and crystalline GST, the three proposed structures can act as reconfigurable and non-volatile modulators and switches with excellent modulation depth 14 dB and fast response time in nanosecond, meanwhile possessing small footprints, simple frameworks and easy fabrication. This work provides new solutions to design active devices in MIM…
The performance of plasmonic nanoantenna structures on top of SOI wire waveguides as coherent perfect absorbers for modulators and all-optical switches is explored. The absorption, scattering, reflection and transmission spectra of gold and aluminum nanoantenna-loaded waveguides were calculated by means of 3D finite-difference time-domain simulations for single waves propagating along the waveguide, as well as for standing wave scenarios composed from two counterpropagating waves. The investigated configurations showed losses of roughly 1% and extinction ratios greater than 25 dB for modulator…
We study an ultra-compact plasmonic modulator that can be applied in photonic integrated circuits. The modulator is a metal-insulator-metal waveguide with an additional ultra-thin layer of indium tin oxide (ITO). Bias is applied to the multilayer core by means of metal plates that serve as electrodes. External field changes carrier density in the ultra-thin ITO layer, which influences the permittivity. The metal-insulator-metal system possesses a plasmon resonance, and it is strongly affected by changes in the permittivity of the active layer. To improve performance of the structure we propose…
We investigate plasmonic modulators with a gain material to be implemented as ultra-compact and ultra-fast active nanodevices in photonic integrated circuits. We analyze metal-semiconductor-metal (MSM) waveguides with InGaAsP-based active material layers as ultra-compact plasmonic modulators. The modulation is achieved by changing the gain of the core that results in different transmittance through the waveguides. A MSM waveguide enables high field localization and therefore high modulation speed. Bulk semiconductor, quantum wells and quantum dots, arranged in either horizontal or vertical lay…
We propose new designs of plasmonic modulators, which can be utilized for dynamic signal switching in photonic integrated circuits. We study performance of plasmonic waveguide modulator with bismuth ferrite as an active material. The bismuth ferrite core is sandwiched between metal plates (metal-insulator-metal configuration), which also serve as electrodes so that the core changes its refractive index under applied voltage by means of partial in-plane to out-of-plane reorientation of ferroelectric domains in bismuth ferrite. This domain switch results in changing of propagation constant and a…
Broadband electro-optic intensity modulators are essential to convert electrical signals to the optical domain. The growing interest in THz wireless applications demands modulators with frequency responses to the sub-THz range, high power handling and very low nonlinear distortions, simultaneously. However, a modulator with all those characteristics has not been demonstrated to date. Here we experimentally demonstrate that plasmonic modulators do not trade off any performance parameter, featuring - at the same time - a short length of 10s of micrometers, record-high flat frequency response bey…
In this paper we report on a low energy consumption CMOS-compatible plasmonic modulator based on Franz-Keldysh effect in germanium on silicon. We performed integrated electro-optical simulations in order to optimize the main characteristics of the modulator. A 3.3 $dB$ extinction ratio for a 30 $μm$ long modulator is demonstrated under 3 $V$ bias voltage at an operation wavelength of 1647 $nm$. The estimated energy consumption is as low as 20 $fJ/bit$.
The guided dispersion characteristics of subwavelength nanoscale plasmonic coaxial lines are analyzed in detail over a wide optical frequency range below the plasma frequency with a varying gap between the inner and outer plasmonic conductors, providing important preliminary information for understanding the guided mode characteristics of subwavelength nanoscale coaxial lines with plasmonic metals. In particular, when the inner or outer radius is varied, guided modes with similar and dissimilar dispersive features are obtained and discussed. A brief comparison of the propagating modes for the …
We introduce chip-integrated visible light communication-band modulators based on niobium (Nb) metallic plasmonic nano-antenna arrays. Our plasmonic nano-devices provide strong sensitivity to the polarization of the incident visible light and the geometrical parameters of their subwavelength nanoscale building blocks. Moreover, they offer optical modulation properties with modulation depth MD = 60% at resonant wavelength lambda= 716 nm, at room temperature. By engineering the photo response of the Nb nano-device arrays, we observe a maximum extinction A(lambda)= 1- R(lambda}) = 95 % at resonan…
In this paper, a numerical solution for a hybrid plasmonic modulator is presented with a six-layer structure consisting of an air superstrate, a gold layer, a barium titanate layer, a n type silicon layer, a gold layer and an Al2O3 nanolattice substrate. Regarding the suggested structure, the parameters related to the phase and the absorption modulation are investigated at different thicknesses. Here, the Pockels effect and the free carrier dispersion effect are considered simultaneously. The dispersion equation of this structure is analytically obtained and numerically solved by the Nelder-Me…
Research on graphene has revealed its unique optical properties, including strong coupling with light, high-speed operation, and gate-variable optical conductivity, which promise to satisfy the needs of future electro-optic (EO) modulators. In particular, recent work demonstrated a broadband EO modulator based on the interband absorption of graphene with overall length only 40μm. However, compared with the size of on-chip electronic components it is still bulky. On-chip optical interconnects require EO modulation at the nanoscale. The key to achieve nanoscale graphene EO modulation is to great…
Dielectrics' refractive index limits photonics miniaturization. By coupling light to metal's free electrons, plasmonic devices achieve deeper localization, which scales with the device geometric size. However, when localization approaches the skin depth, energy shifts from the dielectric into the metal, hindering active modulation. Here we propose a nano-electromechanical phase modulation principle exploiting the extraordinarily strong dependence of the phase velocity of metal-insulator-metal(MIM) gap plasmons on dynamically variable gap size. We demonstrate a 23 μm long non-resonant modulator…
In atomic multi-level systems, adiabatic elimination is a method used to minimize complicity of the system by eliminating irrelevant and strongly coupled levels by detuning them from one-another. Such a three-level system, for instance, can be mapped onto physical in form of a three-waveguide system. Actively detuning the coupling strength between the respective waveguide modes allows modulating light propagating through the device, as proposed here. The outer waveguides act as an effective two- photonic-mode system similar to ground- and excited states of a three-level atomic system, whilst t…
Densely integrated active photonics is key for next generation on-chip networks for addressing both footprint and energy budget concerns. However, the weak light-matter interaction in traditional active Silicon optoelectronics mandates rather sizable device lengths. The ideal active material choice should avail high index modulation while being easily integrated into Silicon photonics platforms. Indium tin oxide (ITO) offers such functionalities and has shown promising modulation capacity recently. Interestingly, the nanometer-thin unity-strong index modulation of ITO synergistically combines …
The research area of plasmonics promises devices with ultrasmall footprint operating at ultrafast speeds and with lower energy consumption compared to conventional electronics. These devices will operate with light and bridge the gap between microscale dielectric photonic systems and nanoscale electronics. Recent research advancements in nanotechnology and optics have led to the creation of a plethora of new plasmonic designs. Among the most promising are nanoscale antennas operating at optical frequencies, called nanoantennas. Plasmonic nanoantennas can provide enhanced and controllable light…
The field effect in metal-oxide-semiconductor (MOS) capacitors plays a key role in field-effect transistors (FETs), which are the fundamental building blocks of modern digital integrated circuits. Recent works show that the field effect can also be used to make optical/plasmonic modulators. In this paper, we report field effect electro-absorption modulators (FEOMs) each made of an ultrathin epsilon-near-zero (ENZ) film, as the active material, sandwiched in a silicon or plasmonic waveguide. Without a bias, the ENZ film maximizes the attenuation of the waveguides and the modulators work at the …
Observation of surface-plasmon phenomena that are dependent upon the handedness of the circularly polarized incident light (spin) is presented. The polarization-dependent near-field intensity distribution obtained in our experiment is attributed to the presence of a geometric phase arising from the interaction of light with an anisotropic and inhomogeneous nanoscale structure. A near-field vortex surface mode with a spin-dependent topological charge was obtained in a plasmonic microcavity. The remarkable phenomenon of polarization-sensitive focusing in a plasmonic structure was also demonstrat…
Focusing electromagnetic energy to sub-wavelength dimensions has become an increasingly active field of research for a variety of applications such as Heat Assisted Magnetic Recording (HAMR), nanolithography, and nanoscale optical characterization of biological cells and single molecules using near-field scanning optical microscopy (NSOM) technique. Double-sided surface plasmons in a metal-insulator-metal (MIM) geometry have been shown to have very small wavelengths for dielectric of thickness of less than 10 nm. A tapered dielectric structure sandwiched between metal, can be used to efficient…
Surface plasmon polaritons can substantially reduce the sizes of optical devices, since they can concentrate light to (sub)wavelength scales. However, (sub)wavelength-scale electro-optic plasmonic switches or modulators with high efficiency, low insertion loss, and high extinction ratios remain a challenge due to their small active volumes. Here, we use the insulator-metal phase transition of a correlated-electron material, vanadium dioxide, to overcome this limitation and demonstrate compact, broadband, and efficient plasmonic switches with integrated electrical control. The devices are micro…
Plasmonic Electro-Optic Modulators based on Epsilon-Near-Zero Materials: Comparing the Classical Drift-Diffusion and Schrödinger-Poisson Coupling Models
This work aims to design a CMOS compatible, low-electrical power consumption modulator assisted by plasmons. For compactness and reduction of the electrical power consumption, electro-absorption based on the Franz-Keldysh effect in Germanium was chosen for modulation. It consists in the change of the absorption coefficient of the material near the band edge under the application of a static electric field, hence producing a direct modulation of the light intensity. The use of plasmons allows enhancing the electro-optical effect due to the high field confinement. An integrated electro-optical s…
The emerging field of plasmonics can lead to enhanced light matter interactions at extremely nanoscale regions. Plasmonic (metallic) devices promise to efficiently control both classical and quantum properties of light. Plasmonic waveguides are usually used to excite confined electromagnetic modes at the nanoscale that can strongly interact with matter. The analysis of these nanowaveguides exhibits similarities with their low frequency microwave counterparts. In this article, we review ways to study plasmonic nanostructures coupled to quantum optical emitters from a classical electromagnetic p…
To enable multiple functions of plasmonic nanocircuits, it is of key importance to control the propagation properties and the modal distribution of the guided optical modes such that their impedance matches to that of nearby quantum systems and desired light-matter interaction can be achieved. Here, we present efficient mode converters for manipulating guided modes on a plasmonic two-wire transmission line. The mode conversion is achieved through varying the path length, wire cross section and the surrounding index of refraction. Instead of pure optical interference, strong near-field coupling…
While the thermal and electromagnetic properties of plasmonic nanostructures are well understood, nanoscale thermometry still presents an experimental and theoretical challenge. Plasmonic structures can confine electromagnetic energy at the nanoscale, resulting in local, inhomogeneous, controllable heating. But reading out the temperature with nanoscale precision using optical techniques poses a difficult challenge. Here we report on the optical thermometry of individual gold nanorod trimers that exhibit multiple wavelength-dependent plasmon modes resulting in measurably different local temper…
We investigate a plasmonic electro-optic modulator with an extinction ratio exceeding 1 dB/um by engineering the optical mode to be in-plane with the graphene layer, and show how lowering the operating temperature enables steeper switching. We show how cooling Graphene enables steeping thus improving dynamic energy consumption. Further, we show that multi-layer Graphene integrated with a plasmonic slot waveguide allows for in-plane electric field components, and 3-dB device lengths as short as several hundred nanometers only. Compact modulators approaching electronic length-scales pave a way f…
Integration of photon pairs nanosources is a major challenge for quantum technology. In this context, we develop a formalism for the investigation of Spontaneous Parametric Down Conversion in hybrid structures that combine plasmonic resonances and intrinsic nonlinearity. Using quantum and numerical approaches together, we quantitatively evaluate photon pair correlation measurements for realistic experimental configurations. Hybrid structures embedding a small nanocystal allow for a $10^{3}$ fold increase in pair production compared to the same nanocrystal alone and a photon pair production eff…
Here, we propose a conceptual approach for design of an ultracompact nanoscale passive optical circulator based on the excitation of plasmonic resonances. We study a three-port Y-junction with a deep subwavelength plasmonic nanorod structure integrated into its core. We show theoretically that such a structure immersed in the magneto-optical media may function as magnetically tunable scatterer tilting and rotating its near-field distribution and corresponding radiation. We demonstrate, using numerical simulations, that such a rotation of the near-field radiation yields a break in the symmetry …
Nanotechnology and the consequent emergence of miniaturized devices are driving the need to improve our understanding of the mechanical properties of a myriad of materials. Here we focus on amorphous polymeric materials and introduce a new way to determine the nanoscale mechanical response of polymeric thin films in the GHz range, using ultrafast optical means. Coupling of the films to plasmonic nanoantennas excited at their vibrational eigenfrequencies allows the extraction of the values of the mechanical moduli as well as the estimation of the glass transition temperature via time-domain mea…
Open quantum systems consisting of coupled bound and continuum states have been studied in a variety of physical systems, particularly within the scope of nuclear, atomic and molecular physics. In the open systems, the effects of the continuum decay channels are accounted for by indirect non-Hermitian couplings among the quasi-bound states. Here we explore anti-Hermitian coupling in a plasmonic system for spatially manipulating light on the nano-scale. We show that by utilizing the anti-Hermitian coupling, plasmonic antennas closely packed within only λ/15 separations can be individually excit…
Future wireless communication networks have to handle data rates of tens or even hundreds of Gbit/s per link, requiring carrier frequencies in the unallocated terahertz (THz) spectrum. In this context, seamless integration of THz links into existing fiber-optic infrastructures is of great importance to complement the inherent portability and flexibility advantages of wireless networks by the reliable and virtually unlimited capacity of optical transmission systems. On the technological level, this requires novel device and signal processing concepts for direct conversion of data streams betwee…
We have investigated second harmonic generation (SHG) from Ag-coated LiNbO3 (LN) core-shell nanocuboids and found that giant SHG can occur via deliberately designed double plasmonic resonances. By controlling the aspect ratio, we can tune fundamental wave (FW) and SHG signal to match the longitudinal and transverse plasmonic modes simultaneously, and achieve giant enhancement of SHG by more than five orders of magnitude in comparison to a bare LN nanocuboid and by about one order of magnitude to the case adopting only single plasmonic resonance. The underlying key physics is that the double-re…
The search for miniaturized components for nonlinear optical processes needs a way to overcome the efficiency loss due to the effective size reduction of the active medium. We investigate here a combination of a nanosized nonlinear dielectric crystal and metallic nanoantennas that benefits from both the intrinsic nonlinear conversion efficiency of the nonlinear medium and the local-field enhancement of plasmonic resonances in metallic nanostructures. Careful comparison between experiments and numerical simulations reveals that the observed 10 to 1000 fold enhancement in Second Harmonic Generat…
Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that two-dimensional layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this review, we cover the state-of-the-art of optical modulators based on two-dimensional layered materials including …
We theoretically investigate a nanoscale mode-division multiplexing scheme based on parity-time (PT) symmetric coaxial plasmonic waveguides. Coaxial waveguides support paired degenerate modes corresponding to distinct orbital angular momentum states. PT symmetric inclusions of gain and loss break the degeneracy of the paired modes and create new hybrid modes without orbital angular momentum. This process can be made thresholdless by matching the mode order with the number of gain and loss sections within the coaxial ring. Using both a Hamiltonian formulation and degenerate perturbation theory,…
We develop a self-consistent finite element method to study spontaneous emission at nanoscale proximity of plasmonic waveguides. In the model, it is assumed that only one guided mode is dominatingly excited by the quantum emitter. With such one dominating mode assumption, the cross section of the plasmonic waveguide can be arbitrary. We apply our numerical method to calculate the coupling of a quantum emitter to a cylindrical nanowire and a rectangular waveguide, and compare the cylindrical nanowire to previous work valid in quasistatic approximation. The fraction of the energy coupled to the …
In our work we investigate the propagation of optical modes in nanoscale hybrid plasmonic waveguides. Frequency domain Maxwell equations based simulations are implemented to study properties of mixed modes in 3D. The results of our analysis are applied to design an advanced hybrid waveguide with useful characteristics. It is demonstrated here how to couple two edge plasmons with a waveguide mode to form a hybrid waveguide well tuned for applications in the field of electro-optical transistors (modulators). A mixed polarization state of edge plasmons allows them to couple with a horizontally po…
Spin defects in hexagonal boron nitride, and specifically the negatively charged boron vacancy (VB) centres, are emerging candidates for quantum sensing. However, the VB defects suffer from low quantum efficiency and as a result exhibit weak photoluminescence. In this work, we demonstrate a scalable approach to dramatically enhance the VB- emission by coupling to a plasmonic gap cavity. The plasmonic cavity is composed of a flat gold surface and a silver cube, with few-layer hBN flakes positioned in between. Employing these plasmonic cavities, we extracted two orders of magnitude in photolumin…
Nanoscale localization of electromagnetic fields near metallic nanostructures underpins the fundamentals and applications of plasmonics. The unavoidable energy loss from plasmon decay, initially seen as a detriment, has now expanded the scope of plasmonic applications to exploit the generated hot carriers. However, quantitative understanding of the spatial localization of these hot carriers, akin to electromagnetic near-field maps, has been elusive. Here we spatially map hot-electron-driven reduction chemistry with 15 nanometre resolution as a function of time and electromagnetic field polariz…
Fabricating nanocavities in which optically-active single quantum emitters are precisely positioned, is crucial for building nanophotonic devices. Here we show that self-assembly based on robust DNA-origami constructs can precisely position single molecules laterally within sub-5nm gaps between plasmonic substrates that support intense optical confinement. By placing single-molecules at the center of a nanocavity, we show modification of the plasmon cavity resonance before and after bleaching the chromophore, and obtain enhancements of $\geq4\times10^3$ with high quantum yield ($\geq50$%). By …
Simultaneous spatio-temporal confinement of energetic electron pulses to femtosecond and nanometer scales is a topic of great interest in the scientific community, given the potential impact of such development on a wide spectrum of scientific and industrial applications. For example, in ultrafast electron scattering, nanoscale probes would enable accurate maps of structural dynamics in materials with nanoscale heterogeneity, thereby understanding the role of boundaries and defects on macroscopic properties. On the other hand, advances in this field are mostly limited by the electron source br…
Coherent broadband excitation of plasmons brings ultrafast photonics to the nanoscale. However, to fully leverage this potential for ultrafast nanophotonic applications, the capacity to engineer and control the ultrafast response of a plasmonic system at will is crucial. Here, we develop a framework for systematic control and measurement of ultrafast dynamics of near-field hotspots. We show deterministic design of the coherent response of plasmonic antennas at femtosecond timescales. Exploiting the emerging properties of coupled antenna configurations, we use the calibrated antennas to enginee…
Electrically-driven optical antennas can serve as compact sources of electromagnetic radiation operating at optical frequencies. In the most widely explored configurations, the radiation is generated by electrons tunneling between metallic parts of the structure when a bias voltage is applied across the tunneling gap. Rather than relying on an inherently inefficient inelastic light emission in the gap, we suggest to use a ballistic nanoconstriction as the feed element of an optical antenna supporting plasmonic modes. We discuss the underlying mechanisms responsible for the optical emission, an…
This chapter discusses a hydrodynamics-inspired approach to trap and manipulate light in plasmonic nanostructures, which is based on steering optical powerflow around nano-obstacles. New insights into plasmonic nanofocusing mechanisms are obtained by invoking an analogy of the 'photon fluid' (PF). By proper nanostructure design, PF kinetic energy can be locally increased via convective acceleration and then converted into 'pressure' energy to generate localized areas of high field intensity. In particular, trapped light can be molded into optical vortices -tornado-like areas of circular motion…
Efficient delivery of light into nanoscale volumes by converting free photons into localized charge-density oscillations (surface plasmons) enables technological innovation in various fields from biosensing to photovoltaics and quantum computing. Conventional plasmonic nanostructures are designed as nanoscale analogs of radioantennas and waveguides. Here, we discuss an alternative approach for plasmonic nanocircuit engineering that is based on molding the optical powerflow through 'vortex nanogears' around a landscape of local phase singularities 'pinned' to plasmonic nanostructures. We show t…
