用作等离子体激元波导调制器的低损耗可切换材料的铋铁氧体
Bismuth ferrite as low-loss switchable material for plasmonic waveguide modulator
摘要:
我们提出了新的等离子体激元调制器的设计,可用于光子集成电路中的动态信号切换。研究了以铁酸铋为有源材料的等离子体激元波导调制器的性能。铋铁氧体芯夹在金属板(金属-绝缘体-金属配置)之间,金属板也用作电极,使得芯在施加电压下通过铋铁氧体中的铁电畴的部分面内到面外重新取向来改变其折射率。这种域切换导致传播常数和吸收系数的改变,因此可以实现相位或幅度控制。由于金属层之间的高场限制以及针对芯厚度的特定值的模式截止的存在,实现了有效的调制性能,使得可以以优异的调制深度控制信号。对于相位控制方案,π相移由0.8 μm长度的器件提供,传播损耗为0.29 dB/μm。对于幅度控制,我们预测消光比可达38 dB/μm,传输损耗为1.2 dB/μm。与先前提出的活性材料相比,铁酸铋具有几乎为零的材料损耗,因此基于铁酸铋的调制器不会带来传播信号的额外衰减。
英文摘要:
We propose new designs of plasmonic modulators, which can be utilized for dynamic signal switching in photonic integrated circuits. We study performance of plasmonic waveguide modulator with bismuth ferrite as an active material. The bismuth ferrite core is sandwiched between metal plates (metal-insulator-metal configuration), which also serve as electrodes so that the core changes its refractive index under applied voltage by means of partial in-plane to out-of-plane reorientation of ferroelectric domains in bismuth ferrite. This domain switch results in changing of propagation constant and absorption coefficient, and thus either phase or amplitude control can be implemented. Efficient modulation performance is achieved because of high field confinement between the metal layers, as well as the existence of mode cut-offs for particular values of the core thickness, making it possible to control the signal with superior modulation depth. For the phase control scheme, π phase shift is provided by 0.8-μm length device having propagation losses 0.29 dB/μm. For the amplitude control, we predict up to 38 dB/μm extinction ratio with 1.2 dB/μm propagation loss. In contrast to previously proposed active materials, bismuth ferrite has nearly zero material losses, so bismuth ferrite based modulators do not bring about additional decay of the propagating signal.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。