We report first-principles calculations, within the density functional theory, on the structural and energetic properties of 180$^\circ$ stripe domains in (PbTiO$_{3}$)$_{n}$/(SrTiO$_{3}$)$_{n}$ superlattices. For the explored periodicities ($n$=3 and 6) we find that the polydomain structures compete in energy with the monodomain phases. Our results suggest the progressive transition, as a function of $n$, from a strong to a weak electrostatic coupling regime between the SrTiO$_{3}$ and PbTiO$_{3}$ layers. Structurally, they display continuous rotation of polarization connecting 180$^\circ$ domains. A large offset between [100] atomic rows across the domain wall and huge strain gradients are observed. The domain wall energy is very isotropic, depending very weakly on the stripe orientation.
Artificial PbTiO$_{3}$/SrTiO$_{3}$ superlattices were constructed using off-axis RF magnetron sputtering. X-ray diffraction and piezoelectric atomic force microscopy were used to study the evolution of the ferroelectric polarization as the ratio of PbTiO$_{3}$ to SrTiO$_{3}$ was changed. For PbTiO$_{3}$ layer thicknesses larger than the 3-unit cells SrTiO$_{3}$ thickness used in the structure, the polarization is found to be reduced as the PbTiO$_{3}$ thickness is decreased. This observation confirms the primary role of the depolarization field in the polarization reduction in thin films. For …
The effect of layer-by-layer heterostructuring and epitaxial strain on lattice instabilities and related ferroelectric properties is investigated from first principles for the [001]-(PbTiO$_3$)$_1$(PbZrO$_3$)$_1$ superlattice and pure PbTiO$_3$ on a cubic substrate. The results for the superlattice show an enhancement of the stability of the monoclinic r-phase with respect to pure PbTiO$_3$. Analysis of the lattice instabilities of the relaxed centrosymmetric reference structure computed within density functional perturbation theory suggests that this results from the presence of two unstable …
The local structural distortions in polydomain ferroelectric PbTiO3/SrTiO3 superlattices are investigated by means of high spatial and energy resolution electron energy loss spectroscopy combined with high angle annular dark field imaging. Local structural variations across the interfaces have been identified with unit cell resolution through the analysis of the energy loss near edge structure of the Ti-L2,3 and O-K edges. Ab-initio and multiplet calculations of the Ti-L2,3 edges provide unambiguous evidence for an inhomogeneous polarization profile associated with the observed structural dist…
We have fabricated PbTiO$_{3}$/SrRuO$_{3}$ superlattices with ultra-thin SrRuO$_{3}$ layers. Due to the superlattice geometry, the samples show a large anisotropy in their electrical resistivity, which can be controlled by changing the thickness of the PbTiO$_{3}$ layers. Therefore, along the ferroelectric direction, SrRuO$_{3}$ layers can act as dielectric, rather than metallic, elements. We show that, by reducing the concentration of PbTiO$_{3}$, an increasingly important effect of polarization asymmetry due to compositional inversion symmetry breaking occurs. The results are significant as …
Ab initio phonon calculations for the nonpolar reference structures of the (001), (110), and (111) PbZrO_3/PbTiO_3 [1:1] superlattices are presented. The unstable polar modes in the tetragonal (001) and (110) structures are confined in either the Ti- or the Zr-centered layers and display two-mode behavior, while in the cubic (111) case one-mode behavior is observed. Instabilities with pure oxygen character are observed in all three structures. The implications for the ferroelectric behavior and related properties are discussed.
In this paper, an efficient computational material design approach (cluster expansion) is employed for the ferroelectric $PbTiO_3$/$SrTiO_3$ system. Via exploring a conguration space including over $3 \times 10^6$ candidates, two special cation ordered configurations: either perfect or mixed 1/1 (101) superlattice, are identified with the mostly enhanced ferroelectric polarization by up to about 100% in comparison with the (001) superlattice. Analyzing these two special configurations reveals the exotic couplings between the antiferrodistortive distortion (AFD) and ferroelectric polarization (…
We study the emergence of Berezinskii-Kosterlitz-Thouless (BKT) phases in (PbTiO$_3$)$_3$/(SrTiO$_3$)$_3$ superlattices by means of second-principles simulations. Beyond a threshold tensile epitaxial strain of $ε= 0.25 \%$ the local dipole moments within the superlattices are confined to the film-plane, and thus the polarization can be effectively considered as two-dimensional. The analysis of the decay of the dipole-dipole correlation with the distance, together with the study of the density of defects and its distribution as function of temperature, supports the existence of a BKT phase in a…
We report first-principles calculations on the coupling between epitaxial strain, polarization, and oxygen octahedra rotations in monodomain (PbTiO$_{3}$)$_{n}$/(SrTiO$_{3}$)$_{n}$ superlattices. We show how the interplay between (i) the epitaxial strain and (ii) the electrostatic conditions, can be used to control the orientation of the main axis of the system. The electrostatic constrains at the interface facilitate the rotation of the polarization and, as a consequence, we predict large piezoelectric responses at epitaxial strains smaller than those that would be required considering only s…
A set of symmetric and asymmetric superlattices with ferromagnetic La0.6Sr0.4MnO3 and ferroelectric 0.7Pb(Mg0.33Nb0.67)O3 0.3(PbTiO3) as the constituting layers were fabricated on LaNiO3 coated (100) oriented LaAlO3 substrates using pulsed laser ablation. The crystallinity, magnetic and ferroelectric properties were studied for all the superlattices. All the superlattice structures exhibited a ferromagnetic behavior over a wide range of temperatures between 10K and 300K, whereas only the asymmetric superlattices exhibited a reasonably good ferroelectric behaviour. Strong influence of an applie…
Ferroelectric materials are characterized by degenerate ground states with multiple polarization directions. In a ferroelectric capacitor this should manifest as equally favourable up and down polarization states. However, this ideal behavior is rarely observed in ferroelectric thin films and superlattice devices, which generally exhibit a built-in bias which favors one polarization state over the other. Often this polarization asymmetry can be attributed to the electrodes. In this study we examine bias in PbTiO$_3$-based ferroelectric superlattices that is not due to the electrodes, but rathe…
First-principles density functional calculations are performed to investigate the interplay between inplane strains and interface effects in 1by1 PbTiO3/SrTiO3 and BaTiO3/SrTiO3 superlattices of tetragonal symmetry. One particular emphasis of this study is to conduct side-by-side comparisons on various ferroelectric properties in short-period superlattices and in constituent bulk materials, which turns out to be rather useful in terms of obtaining valuable insight into the different physics when ferroelectric bulks form superlattices. The various properties that are studied in this work includ…
We report first principles density functional perturbation theory calculations and inelastic neutron scattering measurements of the phonon density of states, dispersion relations and electromechanical response of PbTiO3, BaTiO3 and SrTiO3. The phonon density-of-states of the quantum paraelectric SrTiO3 is found to be fundamentally distinct from that of ferroelectric PbTiO3 and BaTiO3 with a large 70-90 meV phonon band-gap. The phonon dispersion and electromechanical response of PbTiO3 reveal giant anisotropies. The interplay of covalent bonding and ferroelectricity, strongly modulates the elec…
We study Ti 1s near-edge spectroscopy in PbTiO$_3$ at various temperatures above and below its tetragonal-to-cubic phase transition, and in SrTiO$_3$ at room temperature. Ab initio molecular dynamics (AIMD) runs on 80-atom supercells are used to determine the average internal coordinates and their fluctuations. We determine that one vector local order parameter is the dominant contributor to changes in spectral features: the displacement of the Ti ion with respect to its axial O neighbors in each Cartesian direction, as these displacements enhance the cross section for transitions to E$_{\rm g…
The defect stability in a prototypical perovskite oxide superlattice consisting of SrTiO$_3$ and PbTiO$_3$ (STO/PTO) is determined using first principles density functional theory calculations. Specifically, the oxygen vacancy formation energies E$_v$ in the paraelectric and ferroelectric phases of a superlattice with four atomic layers of STO and four layers of PTO (4STO/4PTO) are determined and compared. The effects of charge state, octahedral rotation, polarization, and interfaces on the E$_v$ are examined. The formation energies vary layer-by-layer in the superlattices, with E$_v$ being hi…
We present first-principles calculations of the structural phase behavior of the [1:1] \pzta\ superlattice and the \ptoa\ and \pzoa\ parent compounds as a function of in-plane epitaxial strain. A symmetry analysis is used to identify the phases and clarify how they arise from an interplay between different kinds of structural distortions, including out-of-plane and in-plane polar modes, rotation of oxygen octahedra around out-of-plane or in-plane axes, and an anti-polar mode. Symmetry-allowed intermode couplings are identified and used to elucidate the nature of the observed phase transitions.…
The spontaneous polarization of epitaxial BaTiO$_3$/SrTiO$_3$ superlattices is studied as a function of composition using first-principles density functional theory within the local density approximation. With the in-plane lattice parameter fixed to that of bulk SrTiO$_3$, the computed superlattice polarization is enhanced above that of bulk BaTiO$_3$ for superlattices with BaTiO$_3$ fraction larger than 40%. In contrast to their bulk paraelectric character, the SrTiO$_3$ layers are found to be {\it tetragonal and polar}, possessing nearly the same polarization as the BaTiO$_3$ layers. General…
Charge dipole moment and spin moment rarely coexist in single-phase bulk materials except in some multiferroics. Despite the progress in the past decade, for most multiferroics their magnetoelectric performance remains poor due to the intrinsic exclusion between charge dipole and spin moment. As an alternative approach, the oxide heterostructures may evade the intrinsic limits in bulk materials and provide more attractive potential to realize the magnetoelectric functions. Here we perform a first-principles study on LaAlO$_3$/PbTiO$_3$ superlattices. Although neither of the components is magne…
The spontaneously formed striped polarization nanodomain configuration of a PbTiO${_3}$/SrTiO${_3}$ superlattice transforms to a uniform polarization state under above-bandgap illumination with a time dependence varying with the intensity of optical illumination and a well-defined threshold intensity. Recovery after the end of illumination occurs over a temperature-dependent period of tens of seconds at room temperature and shorter times at elevated temperatures. A model in which the screening of the depolarization field depends on the population of trapped electrons correctly predicts the obs…
The crystal structure and local spontaneous polarization of (BaTiO3)m/(SrTiO3)n superlattices is calculated using a first-principles density functional theory method. The in-plane lattice constant is 1% larger than the SrTiO3 substrate to imitate the relaxed superlattice structure and the symmetry is lowered to monoclinic space group Cm which allows polarization to develop along the [110] and [001] directions. The polarization component in the [110] direction is found to develop only in the SrTiO3 layers and falls to zero in the BaTiO3 layers, whereas the polarization in the [001] direction is…
Specific forms of the exchange correlation energy functionals in first-principles density functional theory-based calculations, such as the local density approximation (LDA) and generalized-gradient approximations (GGA), give rise to structural lattice parameters with typical errors of -2% and 2%. Due to a strong coupling between structure and polarization, the order parameter of ferroelectric transitions, they result in large errors in estimation of temperature dependent ferroelectric structural transition properties. Here, we employ a recently developed GGA functional of Wu and Cohen [Phys. …
Using first principles calculations, we determined the epitaxial-strain dependence of the ground state of the 1:1 SrCrO$_3$/SrTiO$_3$ superlattice. The superlattice layering leads to significant changes in the electronic states near the Fermi level, derived from Cr $t_{2g}$ orbitals. An insulating phase is found when the tensile strain is greater than 2.2\% relative to unstrained cubic SrTiO$_3$. The insulating character is shown to arise from Cr $t_{2g}$ orbital ordering, which is produced by an in-plane polar distortion that couples to the superlattice d-bands and is stabilized by epitaxial …
Ferroelectric BiFeO3 thin films and artificial superlattices of (BiFeO3)m(SrTiO3)m (m~ 1 to 10 unit cells) were fabricated on (001)-oriented SrTiO3 substrates by pulsed laser ablation. The variation of leakage current and macroscopic polarization with periodicity was studied. Piezo force microscopy studies revealed the presence of large ferroelectric domains in the case of BiFeO3 thin films while a size reduction in ferroelectric domains was observed in the case of superlattice structures. The results show that the modification of ferroelectric domains through superlattice, could provide an ad…
Accessing the regime of coherent phonon propagation in nanostructures opens enormous possibilities to control the thermal conductivity in energy harvesting devices, phononic circuits, etc. In this paper we show that coherent phonons contribute substantially to the thermal conductivity of LaCoO3/SrTiO3 oxide superlattices, up to room temperature. We show that their contribution can be tuned through small variations of the superlattice periodicity, without changing the total superlattice thickness. Using this strategy, we tuned the thermal conductivity by 20% at room temperature. We also discuss…
We report first principles characterization of the structural and electronic properties of (SrTiO$_{3}$)$_{5}$/(SrRuO$_{3}$)$_{1}$ superlattices. We show that the system exhibits a spin-polarized two-dimensional electron gas, extremely confined to the 4$d$ orbitals of Ru in the SrRuO$_{3}$ layer. Every interface in the superlattice behaves as a minority-spin half-metal ferromagnet, with a magnetic moment of $μ$ = 2.0 $μ_{\rm B}$/SrRuO$_{3}$ unit. The shape of the electronic density of states, half metallicity and magnetism are explained in terms of a simplified tight-binding model, considering…
The effect of epitaxial strain on the phonon spectra, crystal structure, spontaneous polarization, dielectric, piezoelectric, and elastic properties of (001)-oriented ferroelectric (BaTiO$_3$)$_m$/(SrTiO$_3$)$_n$ superlattices ($m = n = {}$1-4) was studied using the first-principles density-functional theory. The ground state of free-standing superlattices is the monoclinic $Cm$ polar phase. Under the in-plane biaxial compressive strain, it transforms to tetragonal $P4mm$ polar phase, and under the in-plane biaxial tensile strain, it transforms to orthorhombic $Amm2$ polar phase. When changing…
We investigate the structural, electronic, transport, and thermoelectric properties of LaNiO$_3$/SrTiO$_3(001)$ superlattices containing either exclusively $n$- or $p$-type interfaces or coupled interfaces of opposite polarity by using density functional theory calculations with an on-site Coulomb repulsion term. The results show that significant octahedral tilts are induced in the SrTiO$_3$ part of the superlattice. Moreover, the La-Sr distances and Ni-O out-of-plane bond lengths at the interfaces exhibit a distinct variation by about $7\,\%$ with the sign of the electrostatic doping. In cont…
In the first-principles bulk-layer model the superlattice structure and polarization are determined by first-principles computation of the bulk responses of the constituents to the electrical and mechanical boundary conditions in an insulating superlattice. In this work the model is extended to predict functional properties, specifically dielectric permittivity and piezoelectric response. A detailed comparison between the bulk-layer model and full first-principles calculations for three sets of perovskite oxide superlattices, PbTiO$_3$/BaTiO$_3$, BaTiO$_3$/SrTiO$_3$ and PbTiO$_3$/SrTiO$_3$, is…
Low dimensional structures comprised of ferroelectric (FE) PbTiO$_3$ (PTO) and quantum paraelectric SrTiO$_3$ (STO) are hosts to complex polarization textures such as polar waves, flux-closure domains and polar skyrmion phases. Density functional theory (DFT) simulations can provide insight into this order, but, are limited by the computational effort needed to simulate the thousands of required atoms. To relieve this issue, we use the novel multi-site support function (MSSF) method within DFT to reduce the solution time for the electronic groundstate whilst preserving high accuracy. Using MSS…
We investigated with synchrotron x-ray diffraction and reflectometry the formation of structural domains in the near-surface region of single crystalline SrTiO3 (001) substrates with Y0.6Pr0.4Ba2Cu3O7 / La2/3Ca1/3MnO3 superlattices grown on top. We find that the antiferrodistortive cubic-to-tetragonal transition, which occurs at T_STO = 104K in the bulk and at a considerably higher temperature of at least 120K in the surface region of SrTiO3, has only a weak influence on the domain formation. The strongest changes occur instead in the vicinitiy of the tetragonal-to-orthorhombic transition in S…
Epitaxial interfaces and superlattices comprised of polar and non-polar perovskite oxides have generated considerable interest because they possess a range of desirable properties for functional devices. In this work, emergent polarization in superlattices of SrTiO$_3$ (STO) and LaCrO$_3$ (LCO) is demonstrated. By controlling the interfaces between polar LCO and non-polar STO, polarization is induced throughout the STO layers of the superlattice. Using x-ray absorption near-edge spectroscopy and aberration-corrected scanning transmission electron microscopy displacements of the Ti cations off-…
Results from dielectric and structural measurements on epitaxial SrTiO$_3$/BaZrO$_3$ superlattices reveal properties that cannot be explained simply in terms of those measured on single films of the constituent materials. For large superlattice periodicities (20/20 and 38/38 structures, i.e. samples in which each SrTiO3 and BaZrO3 layer are 20 or 38 unit cells thick, respectively), the capacitance-voltage curves indicate room-temperature ferroelectricity. For smaller periodicities (7/7 and 15/15), anti-ferroelectric-type behavior is observed, suggesting strong coupling between individual polar…
In epitaxially strained ferroelectric thin films and superlattices, the ferroelectric transition temperature can lie above the growth temperature. Ferroelectric polarization and domains should then evolve during the growth of a sample, and electrostatic boundary conditions may play an important role. In this work, ferroelectric domains, surface termination, average lattice parameter and bilayer thickness are simultaneously monitored using in-situ synchrotron x-ray diffraction during the growth of BaTiO$_3$/SrTiO$_3$ superlattices on SrTiO$_3$ substrates by off-axis RF magnetron sputtering. The…
Using optical spectroscopy, we investigated the electrodynamic properties of Nb:SrTiO3/SrTiO3 superlattices. In these superlattices, a large enhancement of the Seebeck coefficient (S) has been reported with decreasing Nb:SrTiO3 layer thickness [refer to H. Ohta et al., Nature Mater. 6, 129 (2007)]. By analyzing the optical spectra, we found that the polaron plays an important role in determining the electrodynamic properties of the superlattices. With decreasing Nb:SrTiO3 layer thickness from eleven to one unit cell, we observed a threefold enhancement of the polaron effective mass and relaxat…
Artificial superlattices of (BiFeO3)m(SrTiO3)m (m= 1 to 10 unit cells) consisting of multiferroic BiFeO3 and insulating SrTiO3 layers were fabricated on (100)-oriented SrTiO3 substrates by pulsed laser ablation. The remnant polarization and leakage current behavior were studied varying the periodicity (8-80A) of the superlattice. The leakage current was reduced by few orders of magnitude on increase of periodicity compared to single layer BiFeO3 thin films. Reduced leakage and intrinsic polarization hysteresis was observed and was confirmed by PUND analysis for periodicities in the range 20-60…
The effect of intermixing at the interface of short period PbTiO$_3$/SrTiO$_3$ superlattices is studied using first-principles density functional theory. The results indicate that interfacial intermixing significantly enhances the polarization within the superlattice. This enhancement is directly related to the off-centering of Pb and Sr cations and can be explained through a discussion of interacting dipoles. This picture should be general for a wide range of multicomponent superlattices and may have important consequences for the design of ferroelectric devices.
Using {\it ab initio} density functional theory we explore the behavior of thin layers of metallic $d^4$ SrFeO$_3$ confined between the $d^0$ dielectric SrTiO$_3$ in a superlattice geometry. We find the presence of insulating SrTiO$_3$ spacer layers strongly affects the electronic properties of SrFeO$_3$: For single SrFeO$_3$ layers constrained to their bulk cubic structure, the Fermi surface is two-dimensional, nested and resembles the hole-doped superconducting cuprates. A Jahn-Teller instability couples to an octahedral tilt mode, however, to remove this degeneracy resulting in insulating s…
Based on the locality principle of insulating superlattices, we apply the method of Wu {\it et al} [Phys. Rev. Letter {\bf 101}, 087610 (2008)] to the piezoelectric strains of individual layers under fixed displacement field. For a superlattice of arbitrary stacking sequence an accurate model is acquired for predicting piezoelectricity. By applying the model in the superlattices where ferroelectric and antiferrodistortive modes are in competition, functional piezoelectricity can be achieved. A strong nonlinear effect is observed and can be further engineered in the PbTiO$_3$/SrTiO$_3$ superlat…
(BiFeO3)(1-x)Λ/(LaFeO3)xΛ superlattices (SLs) with varying x have been grown by pulsed laser deposition on (111) oriented SrTiO3 substrates. In order to obtain good epitaxy and flat samples a conducting SrRuO3 buffer has been deposited prior to the superlattices to screen the polar mismatch for such (111) SrTiO3 orientation. X-ray diffraction reciprocal space mapping on different family of planes were collected and evidenced a room temperature structural change at x=0.5 from a rhombohedral/monoclinic structure for rich BiFeO3 to an orthorhombic symmetry for rich LaFeO3. This symmetry change ha…
Negative capacitance in BaTiO$_3$/SrTiO$_3$ superlattices is investigated by Monte Carlo simulations in an atomistic effective Hamiltonian model, using fluctuation formulas for responses to the local macroscopic field that incorporates depolarizing fields. We show epitaxial strain can tune the negative capacitance of the BaTiO$_3$ ferroelectric layer and the overall capacitance of the system over a broad temperature range. In addition, we predict and explain an original switching of the negative capacitance from the BaTiO$_3$ layer to the SrTiO$_3$ layer at low temperatures for intermediate st…
Ferroelectric domains were investigated using piezoresponse force microscopy in superlattices composed of multiferroic BiFeO3 and SrTiO3 layers. Compared to single BiFeO3 thin films, a reduction in the domains size and a suppression of the in-plane orientation of domains are observed in a superlattice of (BiFeO3)4(SrTiO3)8, suggesting a constrained ferroelectric domain orientation along the out-of-plane <001> direction. Such modification of domain size and orientation in BiFeO3-based heterostructures could play a vital role on engineering the domains and domain wall mediated functional propert…
By using first-principles density functional theory calculations for (LaNiO3)m/(SrTiO3)n superlattices, we report a systematic way of electronic response to the interface geometry. It is found that Fermi level density of states of metallic nickelate layers is significantly reduced without charge transfer in the vicinity of interface to the insulating SrTiO3. This type of electronic state redistribution is clearly distinctive from other interface phenomena such as charge and orbital reconstruction. Our result sheds new light towards understanding the nickelates and other transitionmetal oxide h…
Understanding the nature of electrical conductivity, superconductivity and magnetism between layers of oxides is of immense importance for the design of electronic devices employing oxide heterostructures. We demonstrate that resonant inelastic X-ray scattering can be applied to directly probe the carriers in oxide heterostructures. Our investigation on epitaxially grown LaAlO3/SrTiO3 superlattices unambiguously reveals the presence of both localized and delocalized Ti 3d carriers. These two types of carriers are caused by oxygen vacancies and electron transfer due to the polar discontinuity a…
Using advanced ab-initio calculations, we describe the formation and confinement of a two-dimensional electron gas in short-period ($\simeq$4 nm) Nb-doped SrTiO$_3$ superlattices as function of Nb doping. We predict complete two-dimensional confinement for doping concentrations higher than 70%. In agreement with previous observations, we find a large thermopower enhancement at room temperature. However, this effect is primarily determined by dilution of the mobile charge over a multitude of weakly occupied bands. As a general rule, we conclude that thermopower in similar heterostructures will …
In the development of first-principles high-throughput searches for materials with desirable functional properties, there is a clear need for an efficient method to determine the ground state and low-energy alternative structures of superlattices. A method based on a simple strategy -- to generate starting structures based on low-energy structures of the constituent compounds, which are then optimized via structural relaxation calculations -- is proposed. This "stacking method" is demonstrated on the 2:2 PbTiO$_3$/SrTiO$_3$ superlattice, which has been the subject of recent experimental and th…
Using a combination of first-principles simulations, based on the density functional theory and Boltzmann's semiclassical theory, we have calculated the transport and thermoelectric properties of the half-metallic two dimensional electron gas confined in single SrRuO$_3$ layers of SrTiO$_3$/SrRuO$_3$ periodic superlattices. Close to the Fermi energy we find that the semiconducting majority spin channel displays a very large in-plane component of the Seebeck tensor at room temperature, $S$ = 1500 $μ$V/K, and the minority spin channel shows good in-plane conductivity $σ$ = 2.5 (m$Ω$cm)$^{-1}$. H…
Ultrafast Demagnetization Governed by Spin Fluctuations in CaRuO$_{3}$/SrTiO$_{3}$ Superlattice
Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences（中国科学院物理研究所凝聚态物理国家实验室）；School of Physical Sciences, University of Chinese Academy of Sciences（中国科学院大学物理科学学院）；Songshan Lake Materials Laboratory（松山湖材料实验室）
Composition-dependent structural and polar properties of epitaxial short-period CaTiO_3/SrTiO_3/BaTiO_3 superlattices grown on a SrTiO_3 substrate are investigated with first-principles density-functional theory computational techniques. Polarization enhancement with respect to bulk tetragonal BaTiO_3 is found for two- and three-component superlattices with a BaTiO_3 concentration of more than 30%. Individual BaTiO_3 layer thickness is identified as an important factor governing the polarization improvement. In addition, the degree of inversion-symmetry breaking in three-component superlattice…
The polarization response of antiferroelectrics to electric fields is such that the materials can store large energy densities, which makes them promising candidates for energy storage applications in pulsed-power technologies. However, relatively few materials of this kind are known. Here we consider ferroelectric/paraelectric superlattices as artificial electrostatically-engineered antiferroelectrics. Specifically, using high-throughput second-principles calculations, we engineer PbTiO$_{3}$/SrTiO$_{3}$ superlattices to optimize their energy-storage performance at room temperature (to maximi…
A double-layered perovskite oxide Sr$_3$Mo$_2$O$_7$ is considered a "hidden ladder" system with wide and narrow bands near the Fermi level, for which high-$T_{\rm c}$ superconductivity is expected. However, the difficulty in synthesis, especially in the preparation of samples without oxygen deficiency, can hinder the observation of superconductivity. In this study, we constructed a double-layer SrMoO$_3$ block through artificial superlattices with the insulating SrTiO$_3$ block, (SrMoO$_3$)$_m$/(SrTiO$_3$)$_t$ ($m = 2, 4$; $t = 4$). First-principles calculations for bilayered SrMoO$_3$ ($m = 2…
Emergent phases in the two-dimensional electron gas (2DEG) formed at the interface between two insulating oxides have attracted great attention in the past decade. We present ab-initio electronic structure calculations for the interface between a Mott insulator GdTiO$_3$ (GTO) and a band insulator SrTiO$_3$ (STO) and compare our results with those for the widely studied LaAlO$_3$/SrTiO$_3$ (LAO/STO) interface between two band insulators. Our GTO/STO results are in excellent agreement with experiments, but qualitatively different from LAO/STO. We find an interface carrier density of 0.5$e^{-}$/…
While electrical compatibility constraints normally prevent head-to-head (HH) and tail-to-tail (TT) domain walls from forming in ferroelectric materials, we propose that such domain walls could be stabilized by intentional growth of atomic layers in which the cations are substituted from a neighboring column of the periodic table. In particular, we carry out predictive first-principles calculations of superlattices in which Sc, Nb, or other substitutional layers are inserted periodically into PbTiO$_3$. We confirm that this gives rise to a domain structure with the longitudinal component of th…
LaCrO$_3$ (LCO) / SrTiO$_3$ (STO) heterojunctions are intriguing due to a polar discontinuity along (001), two distinct and controllable interface structures [(LaO)$^+$/(TiO$_2$)$^0$ and (SrO)$^0$/(CrO$_2$)$^-$], and interface-induced polarization. In this study, we have used soft- and hard x-ray standing-wave excited photoemission spectroscopy (SW-XPS) to generate a quantitative determination of the elemental depth profiles and interface properties, band alignments, and the depth distribution of the interface-induced built-in potentials in the two constituent oxides. We observe an alternating…
The origin of the functional properties of complex oxide superlattices can be resolved using time-resolved synchrotron x-ray diffraction into contributions from the component layers making up the repeating unit. The CaTiO3 layers of a CaTiO3/BaTiO3 superlattice have a piezoelectric response to an applied electric field, consistent with a large continuous polarization throughout the superlattice. The overall piezoelectric coefficient at large strains, 54 pm/V, agrees with first-principles predictions in which a tetragonal symmetry is imposed on the superlattice by the SrTiO3 substrate.
