In their work [J. Phys. A: Math. Gen. 33, 4427 (2000)], Bender, Brody, and Meister have shown by employing a two-state model of a particle confined in the one-dimensional infinite potential well that it is possible to construct a quantum-mechanical analog of the Carnot engine through the changes of both the width of the well and the quantum state in a specific manner. Here, a discussion is developed about realizing the maximum power of such an engine, where the width of the well moves at low but finite speed. The efficiency of the engine at the maximum power output is found to be universal independently of any of the parameters contained in the model.
In order to build a quantum analog of traditional Carnot engine, a common choice is replacing the two thermodynamic adiabatic processes with two quantum mechanical adiabatic processes. In general, such quantum Carnot engine has six strokes. We analyze the efficiency of such six-stroke quantum Carnot engine in a perturbative way.
A quantum-mechanical analog of the Carnot engine reversibly working at vanishing temperature, shortly termed the quantum-mechanical Carnot engine, is discussed. A general formula for the efficiency of such an engine with an arbitrary confining potential is presented. Its expression is purely given in terms of the structure of the energy spectrum. Dependency of the efficiency on the form of a potential as an analog of the working material in thermodynamics implies nonuniversality of the engine. This may be due to the absence of the second-law-like principle in pure-state quantum mechanics.
A role of the superposition principle is discussed for the quantum-mechanical Carnot engine introduced by Bender, Brody, and Meister [J. Phys. A 33, 4427 (2000)]. It is shown that the efficiency of the engine can be enhanced by superposition of quantum states. A finite-time process is also discussed, and the condition of the maximum power output is presented. Interestingly, the efficiency at the maximum power is lower than that without superposition.
In this work an example of a cyclic engine based on a quantum-mechanical properties of the strongly non linear quantum oscillator described by the Poschl-Teller [PT] model is examined. Using the [PT] model as shown in our earlier works [1-4], a quantum-mechanical analog of Carnot cycle (i.e quantum heat engine) has been constructed through the changes of both, the width L of the well and its quantum state. This quantum heat engine has a cycle consisting of adiabatic and isothermal quantum processes. The efficiency of the quantum engine based on the Poschl-Teller-like potential is derived and i…
We evaluate the efficiency at maximum power of a quantum-dot Carnot heat engine. The universal value of the coefficients at the linear and quadratic order in the temperature gradient are reproduced. Curzon-Ahlborn efficiency is recovered in the limit of weak dissipation.
The efficient conversion of thermal energy to mechanical work by a heat engine is an ongoing technological challenge. Since the pioneering work of Carnot, it is known that the efficiency of heat engines is bounded by a fundamental upper limit, the Carnot limit. Theoretical studies suggest that heat engines may be operated beyond the Carnot limit by exploiting stationary, non-equilibrium reservoirs that are characterized by a temperature as well as further parameters. In a proof-of-principle experiment, we demonstrate that the efficiency of a nano-beam heat engine coupled to squeezed thermal no…
Stability is an important property of small thermal machines with fluctuating power output. We here consider a finite-time quantum Carnot engine based on a degenerate multilevel system and study the influence of its finite Hilbert space structure on its stability. We optimize in particular its relative work fluctuations with respect to level degeneracy and level number. We find that its optimal performance may surpass those of nondegenerate two-level engines or harmonic oscillator motors. Our results show how to realize high-performance, high-stability cyclic quantum heat engines.
The Carnot statement of the second law of thermodynamics poses an upper limit on the efficiency of all heat engines. Recently, it has been studied whether generic quantum features such as coherence and quantum entanglement could allow for quantum devices with efficiencies larger than the Carnot efficiency. The present study shows that this is not permitted by the laws of thermodynamics. In particular, we will show that rather the definition of heat has to be modified to account for the thermodynamic cost for maintaining coherence and entanglement. Our theoretical findings are numerically illus…
The condition for stationary engines to attain the Carnot efficiency in and beyond the linear response regime is investigated. We find that this condition for finite-size engines is significantly different from that for macroscopic engines in the thermodynamic limit. For the case of finite-size engines, the tight-coupling condition in the linear response regime directly implies the attainability of the Carnot efficiency beyond the linear response regime. Contrary to this, for the case of macroscopic engines in the thermodynamic limit, there are three types of mechanisms to attain the Carnot ef…
The maximum efficiency of autonomous engines with finite chemical potential difference is investigated. We show that without a particular type of singularity autonomous engines cannot attain the Carnot efficiency. In addition, we demonstrate that a special autonomous engine with the singularity attains the Carnot efficiency even if it is macroscopic. Our results clearly illustrate that the singularity plays a crucial role for the maximum efficiency of autonomous engines.
Considering ideal paramagnetic medium, in this paper we deduced an expression for the thermal efficiency of Carnot heat engine with a paramagnetic gas as working substance. We found that the efficiency depends on the limits of maximum and minimal temperature imposed on the Carnot cycle, as in the ideal gas, photon gas and variable Chaplygin gas.
We investigate the efficiency at maximum power (EMP) of irreversible quantum Carnot engines that perform finite-time cycles between two temperature tunable baths. The temperature form we adopt can be experimentally realized in squeezed baths in the high temperature limit, which makes our proposal of practical relevance. Focusing on low dissipation engines, we first generalize the pervious upper as well as lower bounds for the EMP to temperature tunable cases in which they are solely determined by a generalized Carnot limit. As an illustrative example, we then consider a minimal heat engine mod…
Approaching Carnot Efficiency at Finite Power in an Experimentally Feasible Quantum Heat Engine
The University of Tokyo（东京大学）；RIKEN Center for Quantum Computing (RQC)（理化学研究所量子计算中心）；Inamori Research Institute for Science (InaRIS)（稻盛科学研究所）；Kyushu University（九州大学）
We want to understand whether and to which extent the maximal (Carnot) efficiency for heat engines can be reached at a finite power. To this end we generalize the Carnot cycle so that it is not restricted to slow processes. We show that for realistic (i.e. not purposefully-designed) engine-bath interactions, the work-optimal engine performing the generalized cycle close to the maximal efficiency has a long cycle time and hence vanishing power. This aspect is shown to relate to the theory of computational complexity. A physical manifestation of the same effect is the Levinthal's paradox in the …
The efficiency at the maximum power (EMP) for finite-time Carnot engines established with the low-dissipation model, relies significantly on the assumption of the inverse proportion scaling of the irreversible entropy generation $ΔS^{(\mathrm{ir})}$ on the operation time $τ$, i.e., $ΔS^{(\mathrm{ir})}\propto1/τ$. The optimal operation time of the finite-time isothermal process for EMP has to be within the valid regime of the inverse proportion scaling. Yet, such consistency was not tested due to the unknown coefficient of the $1/τ$-scaling. In this paper, using a two-level atomic heat engine a…
We study the efficiency at maximum power of non-adiabatic dissipative (internally dissipative friction in finite time adiabatic processes) Carnot-like heat engines operate in finite time under the power law dissipation regime. We find that the non-adiabatic dissipation does not influence the universal minimum and maximum bounds on the efficiency at maximum power obtained in the generalized dissipative Carnot-like heat engines which does not take in to account the non-adiabatic dissipation.
The efficiency at maximum power (EMP) of irreversible Carnot-like heat engines is investigated based on the weak endoreversible assumption and the phenomenologically irreversible thermodynamics. It is found that the weak endoreversible assumption can reduce to the conventional one for the heat engines working at maximum power. Carnot-like heat engines are classified into three types (linear, superlinear, and sublinear) according to different characteristics of constitutive relations between the heat transfer rate and the thermodynamic force. The EMPs of Carnot-like heat engines are proved to b…
The Carnot-like heat engines are classified into three types (normal-, sub- and super-dissipative) according to relations between the minimum irreversible entropy production in the "isothermal" processes and the time for completing those processes. The efficiencies at maximum power of normal-, sub- and super-dissipative Carnot-like heat engines are proved to be bounded between $η_C/2$ and $η_C/(2-η_C)$, $η_C /2$ and $η_C$, 0 and $η_C/(2-η_C)$, respectively. These bounds are also shared by linear, sub- and super-linear irreversible Carnot-like engines [Tu and Wang, Europhys. Lett. 98, 40001 (20…
We study the maximum efficiency of a Carnot cycle heat engine based on a small system. It is revealed that due to the finiteness of the system, irreversibility may arise when the working substance contacts with a heat bath. As a result, there is a working-substance-dependent correction to the usual Carnot efficiency, which is valid only when the working substance is in the thermodynamic limit. We derives a general and simple expression for the maximum efficiency of a Carnot cycle heat engine in terms of the relative entropy. This maximum efficiency approaches the usual Carnot efficiency asympt…
A heat engine operating in the one-shot finite-size regime, where systems composed of a small number of quantum particles interact with hot and cold baths and are restricted to one-shot measurements, delivers fluctuating work. Further, engines with lesser fluctuation produce a lesser amount of deterministic work. Hence, the heat-to-work conversion efficiency stays well below the Carnot efficiency. Here we overcome this limitation and attain Carnot efficiency in the one-shot finite-size regime, where the engines allow the working systems to simultaneously interact with two baths via the semi-lo…
We discuss the reversibility of Brownian heat engine. We perform asymptotic analysis of Kramers equation on Büttiker-Landauer system and show quantitatively that Carnot efficiency is inattainable even in a fully overdamping limit. The inattainability is attributed to the inevitable irreversible heat flow over the temperature boundary.
The Carnot cycle imposes a fundamental upper limit to the efficiency of a macroscopic motor operating between two thermal baths. However, this bound needs to be reinterpreted at microscopic scales, where molecular bio-motors and some artificial micro-engines operate. As described by stochastic thermodynamics, energy transfers in microscopic systems are random and thermal fluctuations induce transient decreases of entropy, allowing for possible violations of the Carnot limit. Despite its potential relevance for the development of a thermodynamics of small systems, an experimental study of micro…
Motivated by the recent work by Mandal and Jarzynski on autonomous Maxwell demon information engine, we have extended their model by introducing two different heat baths. The system (demon) is coupled to a memory register (tape) and a work source. The performance of the system depends on the interplay between these two sources along with the heat baths. We have found the system can act as an engine, refrigerator or an eraser. Even the combination of any two is possible in some parameter space. We have achieved the efficiency of the engine is greater than Carnot limit. The coefficient of perfor…
The Carnot theorem, one expression of the second law of thermodynamics, places a fundamental upper bound on the efficiency of heat engines operating between two heat baths. The Carnot theorem can be stated in a more generalized form for heat engines operating with multiple heat baths, where the maximum efficiency is achieved for reversible heat engines operating quasistatically between two heat baths. In this study, we determine the irreversible efficiency of heat engines operating with multiple heat baths in a linear response regime, i.e., under small temperature differences and a slow variat…
Based on a quantum thermodynamic protocol for shortcut to isothermality that smoothly modify the system-reservoir interaction can significantly speed up an isothermal process while keeping the overall dissipation constant [Phys. Rev. X. 10, 031015 (2020)], we extend the study of optimization performance of Carnot-like heat engines and refrigerators in a straightforward and unified way. We derive the universal optimization efficiency of heat engines and the optimization coefficient of performance of refrigerators under two unified optimization criterions, i.e., chi criterion and omega criterion…
Carnot's theorem poses a fundamental limit on the maximum efficiency achievable from an engine that works between two reservoirs at thermal equilibrium. We extend this result to the case of arbitrary nonthermal stationary reservoirs, even with quantum coherence. In order to do this we prove that a single nonthermal reservoir is formally equivalent to multiple equilibrium ones. Finally, we discuss the possibility of realizing an engine that works at unit efficiency by exploiting quantum coherence present in the reservoir.
Recent advances in experimental control of colloidal systems have spurred a revolution in the production of mesoscale thermodynamic devices. Functional "textbook" engines, such as the Stirling and Carnot cycles, have been produced in colloidal systems where they operate far from equilibrium. Simultaneously, significant theoretical advances have been made in the design and analysis of such devices. Here, we use methods from thermodynamic geometry to characterize the optimal finite-time, nonequilibrium cyclic operation of the parametric harmonic oscillator contact with a time-varying heat bath, …
We study the efficiency at maximum power, $η^*$, of engines performing finite-time Carnot cycles between a hot and a cold reservoir at temperatures $T_h$ and $T_c$, respectively. For engines reaching Carnot efficiency $η_C=1-T_c/T_h$ in the reversible limit (long cycle time, zero dissipation), we find in the limit of low dissipation that $η^*$ is bounded from above by $η_C/(2-η_C)$ and from below by $η_C/2$. These bounds are reached when the ratio of the dissipation during the cold and hot isothermal phases tend respectively to zero or infinity. For symmetric dissipation (ratio one) the Curzon…
Achieving the Carnot efficiency at finite power is a challenging problem in heat engines due to the trade-off relation between efficiency and power that holds for general heat engines. It is pointed out that the Carnot efficiency at finite power may be achievable in the vanishing limit of the relaxation times of a system without breaking the trade-off relation. However, any explicit model of heat engines that realizes this scenario for arbitrary temperature difference has not been proposed. Here, we investigate an underdamped Brownian Carnot cycle where the finite-time adiabatic processes conn…
In the present work, a power law dissipative Carnot like heat engine cycle of two irreversible isothermal and two irreversible adiabatic processes with finite time non-adiabatic dissipation is considered and the efficiency under two optimization criteria $\dotΩ$ figure of merit and efficient power, $χ_{ep}$ is studied. The generalized extreme bounds of the optimized efficiency under the above said optimization criteria are obtained. The lower and upper bounds of the efficiency for the low dissipation Carnot-like heat engine under these optimization criteria are obtained with dissipation level …
The Carnot heat engine sets an upper bound on the efficiency of a heat engine. As an ideal, reversible engine, a single cycle must be performed in infinite time, and so the Carnot engine has zero power. However, there is nothing in principle forbidding the existence of a heat engine whose efficiency approaches that of Carnot while maintaining finite power. Such an engine must have very special properties, some of which have been discussed in the literature, in various limits. While recent theorems rule out a large class of engines from maintaining finite power at exactly the Carnot efficiency,…
We study two-dimensional quantum Carnot engines of spherical symmetry by considering the case of a particle on the surface of a sphere of changing radius. The Carnot cycle is built allowing the state of the system to change with the specific constrains discussed in Bender's work for Carnot cycles. After studying the Carnot cycle, we maximize the output power and efficiency of the system to show that as it happens in one dimension systems:(i) the efficiency can be optimized; being its optimal value independent of the parameters describing the system and that the optimal output power at the opti…
We study the optimal performance of Carnot-like heat engines working in low dissipation regime using the product of the efficiency and the power output, also known as the efficient power, as our objective function. Efficient power function represents the best trade-off between power and efficiency of a heat engine. We find lower and upper bounds on the efficiency in case of extreme asymmetric dissipation when the ratio of dissipation coefficients at the cold and the hot contacts approaches, respectively, zero or infinity. In addition, we obtain the form of efficiency for the case of symmetric …
An analysis of efficiency and its bounds at maximum work output for Carnot-like heat engines is conducted. The heat transfer processes are described by the linear law with time-dependent heat conductance. The upper bound of efficiency is found to be the CA efficiency,and is independent of the time duration completing each process and the time-dependent conductance. We prove that even the working medium exchanges heat sufficiently with the heat reservoirs, the work which could be extracted is finite and limited. The optimal temperature profiles in the heat exchanging processes are also analyzed…
We propose a spin-star network, where a central spin-$1/2$ is coupled with XXZ interaction to $N$ outer spin-$1/2$ particles, as a quantum fuel. If the network is in thermal equilibrium with a cold bath, the central spin can have an effective temperature larger than the bath one and scaling nonlinearly with $N$. The nonlinearity can be tuned to $N^2, N^3$ or $N^4$ with the anisotropy parameter of the coupling. Using a stream of central-spin particles to pump a micromaser cavity, we calculate the dynamics of the cavity field using a coarse-grained master equation. Our study reveals that the cen…
The quantum analog of Carnot cycles in few-particle systems consists of two quantum adiabatic steps and two isothermal steps. This construction is formally justified by use of a minimum work principle. It is then shown, without relying on any microscopic interpretations of work or heat, that the heat-to-work efficiency of the quantum Carnot cycle thus constructed may be further optimized, provided that two conditions regarding the expectation value of some generalized force operators evaluated at equilibrium states are satisfied. In general the optimized efficiency is system-specific, lower th…
We study the stochastic energetic exchanges in quantum heat engines. Due to microreversibility, these obey a fluctuation relation, called the heat engine fluctuation relation, which implies the Carnot bound: no machine can have an efficiency larger than Carnot's efficiency. The stochastic thermodynamics of a quantum heat engine (including the joint statistics of heat and work and the statistics of efficiency) is illustrated by means of an optimal two-qubit heat engine, where each qubit is coupled to a thermal bath and a two-qubit gate determines energy exchanges between the two qubits. We disc…
The efficiency at maximum power output of linear irreversible Carnot-like heat engines is investigated based on the assumption that the rate of irreversible entropy production of working substance in each "isothermal" process is a quadratic form of heat exchange rate between the working substance and the reservoir. It is found that the maximum power output corresponds to minimizing the irreversible entropy production in two "isothermal" processes of the Carnot-like cycle, and that the efficiency at maximum power output has the form as $η_{mP}={η_C}/(2-γη_C)$ where $η_C$ is the Carnot efficienc…
It was reported that, if and only if the specific heat, correlation length, and dynamical exponents $α, ν$ and $z$, fulfill the condition $α-zν>0$, the phase transitions can enable a quantum heat engine to approach Carnot efficiency at finite power. We start our analysis via a different approach in which the effects of interaction and fluctuations on the Hamiltonian of a trapped dilute Bose gas belonging to the same universality as $XY$ model. Based on models of quantum Otto heat engines, we find the general expression of the efficiency which includes the correction due to interaction and fluc…
The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, the system may be utilized as a source of electrical power under steady state conditions. We first disc…
The Carnot cycle is a prototype of ideal heat engine to draw mechanical energy from the heat flux between two thermal baths with the maximum efficiency, dubbed as the Carnot efficiency $η_{\mathrm{C}}$. Such efficiency can only be reached by thermodynamical equilibrium processes with infinite time, accompanied unavoidably with vanishing power - energy output per unit time. In real-world applications, the quest to acquire high power leads to an open question whether a fundamental maximum efficiency exists for finite-time heat engines with given power. We experimentally implement a finite-time C…
There has been many studies on gases which obeys Van der Waal's equation of state. However there is no specific and direct studies of Van der Waal's gas which undergoes adiabatic processes are available in the undergraduate text books and also in literature. In an adiabatic process there is no heat energy exchange between the system and its surroundings. In this article, we find that the Van der Waal's equation for the adiabatic process as $\left(P+\frac{n^2a}{V^2}\right) \left(V-nb\right)^Γ=\mbox{constant}$, where $P$ is the pressure, $V$ is the volume, $n$ is the number of moles of the Van d…
We analyse non-equilibrium Carnot-like cycles built with a colloidal particle in a harmonic trap, which is immersed in a fluid that acts as a heat bath. Our analysis is carried out in the overdamped regime. The cycle comprises four branches: two isothermal processes and two \textit{locally} adiabatic ones. In the latter, both the temperature of the bath and the stiffness of the harmonic trap vary in time, but in such a way that the average heat vanishes for all times. All branches are swept at a finite rate and, therefore, the corresponding processes are irreversible, not quasi-static. Specifi…
ICTP – The Abdus Salam International Centre for Theoretical Physics（阿卜杜斯·萨拉姆国际理论物理中心）；Laboratoire de Physique de l’École Normale Supérieure, CNRS, PSL University, Sorbonne Université, and Université de Paris（巴黎高等师范学院物理实验室，法国国家科学研究中心，巴黎文理研究大学，索邦大学，巴黎大学）；University of Potsdam, Institute of Physics & Astronomy（波茨坦大学，物理与天文学研究所）；Institute for Cross-Disciplinary Physics and Complex Systems, (IFISC, UIB-CSIC)（交叉学科物理与复杂系统研究所）
We analyze the efficiency of thermal engines (either quantum or classical) working with a single heat reservoir like atmosphere. The engine first gets an energy intake, which can be done in arbitrary non-equilibrium way e.g. combustion of fuel. Then the engine performs the work and returns to the initial state. We distinguish two general classes of engines where the working body first equilibrates within itself and then performs the work (ergodic engine) or when it performs the work before equilibrating (non-ergodic engine). We show that in both cases the second law of thermodynamics limits th…
We model a microscopic heat engine as a particle hopping on a one-dimensional lattice in a periodic sawtooth potential, with or without load, assisted by the thermal kicks it gets from alternately placed hot and cold thermal baths. We find analytic expressions for current and rate of heat flow when the engine operates at steady state. Three regions are identified where the model acts either as a heat engine or as a refrigerator or as neither of the two. At quasistatic limit both efficiency of the engine and coefficient of performance of the refrigerator go to that for Carnot engine and Carnot …
Since its inception about two centuries ago thermodynamics has sparkled continuous interest and fundamental questions. According to the second law no heat engine can have an efficiency larger than Carnot's efficiency. The latter can be achieved by the Carnot engine, which however ideally operates in infinite time, hence delivers null power. A currently open question is whether the Carnot efficiency can be achieved at finite power. Most of the previous works addressed this question within the Onsager matrix formalism of linear response theory. Here we pursue a different route based on finite-si…
