V. Novak, M. Cukr, Z. Soban, T. Jungwirth, X. Marti, V. Holy, P. Horodyska, P. Nemec
We report on the molecular beam epitaxy (MBE) growth of high crystalline quality LiMnAs. The introduction of a group-I alkali metal element Li with flux comparable to fluxes of Mn and As has not caused any apparent damage to the MBE system after as many as fifteen growth cycles performed on the system to date.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
A Comment on the Letter by P. Kratzer and M. Scheffler, Phys. Rev. Lett. 88, 036102 (2002).
We have investigated the growth by molecular-beam epitaxy of the II-VI diluted magnetic semiconductor (Zn,Mn)Se on As-passivated Si(100) substrates. The growth start has been optimized by using low-temperature epitaxy. Surface properties were assessed by Nomarski and scanning electron microscopy. Optical properties of (Zn,Mn)Se have been studied by photoluminescence and a giant Zeeman splitting of up to 30 meV has been observed. Our observations indicate a high crystalline quality of the epitaxial films.
Using molecular beam epitaxy (MBE) to grow multi-elemental oxides (MEO) is generally challenging, partly due to difficulty in stoichiometry control. Occasionally, if one of the elements is volatile at the growth temperature, stoichiometry control can be greatly simplified using adsorption-controlled growth mode. Otherwise, stoichiometry control remains one of the main hurdles to achieving high quality MEO film growths. Here, we report another kind of self-limited growth mode, dubbed diffusion-assisted epitaxy, in which excess species diffuses into the substrate and leads to the desired stoichi…
Transition metal oxide heterostructures and interfaces host a variety of exciting quantum phases and can be grown with atomic-scale precision by utilising the intensity oscillations of $in$ $situ$ reflection high-energy electron diffraction (RHEED). However, establishing a stable oscillation pattern in the growth calibration of complex oxides films is very challenging and time consuming. Here, we develop a substantially more efficient and reliable growth calibration method for complex oxide films using molecular beam epitaxy.
We report on the controlled growth of h-BN/graphite by means of molecular beam epitaxy (MBE). X-ray photoelectron spectroscopy (XPS) suggests an interface without any reaction or intermixing, while the angle resolved photoemission spectroscopy (ARPES) measurements show that the h-BN layers are epitaxially aligned with graphite. A well-defined band structure is revealed by ARPES measurement, reflecting the high quality of the h-BN films. The measured valence band maximum (VBM) located at 2.8 eV below the Fermi level reveals the presence of undoped h-BN films (band gap ~ 6 eV). These results dem…
Stoichiometric, epitaxial LaCrO3 films have been grown on TiO2-terminated SrTiO3(001) substrates by molecular beam epitaxy using O2 as the oxidant. Film growth occurred in a layer-by-layer fashion, giving rise to structurally excellent films and surfaces which preserve the step-terrace structure of the substrate. The critical thickness is in excess of 500 Å. Near-surface Cr(III) is highly susceptible to further oxidation to Cr(V), leading to the formation of a disordered phase upon exposure to atomic oxygen. Recovery of the original epitaxial LaCrO3 phase is readily achieved by vacuum annealin…
Wurtzite (Ga,Mn)N films showing ferromagnetic behaviour at room temperature were successfully grown on sapphire(0001) substrates by molecular beam epitaxy using ammonia as nitrogen source. Magnetization measurements were carried out by a superconducting quantum interference device at the temperatures between 1.8K and 300K with magnetic field applied parallel to the film plane up to 7T. The magnetic-field dependence of magnetization of a (Ga,Mn)N film at 300K were ferromagnetic, while a GaN film showed Pauli paramagnetism like behaviour. The Curie temperatures of a (Ga,Mn)N film was estimated a…
We report the growth of self-assembled Bi2Se3 quantum dots (QDs) by molecular beam epitaxy on GaAs substrates using the droplet epitaxy technique. The QD formation occurs after anneal of Bismuth droplets under Selenium flux. Characterization by atomic force microscopy, scanning electron microscopy, X-ray diffraction, high-resolution transmission electron microscopy and X-ray reflectance spectroscopy is presented. The quantum dots are crystalline, with hexagonal shape, and have average dimensions of 12 nm height (12 quintuple layers) and 46 nm width, and a density of $8.5 \cdot 10^9 cm^{-2}$. T…
Self-organized pattern formation by the process of reverse epitaxial growth has been investigated on GaAs (001) surfaces during 1 keV Ar+ bombardment at target temperature of 450 degC for a wide range of incident angles. Highly ordered ripple formation driven by diffusion instability is evidenced at near normal incidence angles. Concurrent sample rotation shows that the ripple morphology and its orientation do not depend on the incident beam direction; rather they are determined by the symmetry of the crystal face.
We have conducted a detailed thin film growth structure of oxygen engineered monoclinic HfO$_{2\pm x}$ grown by reactive molecular beam epitaxy (MBE). The oxidation conditions induce a switching between ($\bar{1}11$) and (002) texture of hafnium oxide. The band gap of oxygen deficient hafnia decreases with increasing amount of oxygen vacancies by more than 1 eV. For high oxygen vacancy concentrations, defect bands form inside the band gap that induce optical transitions and $p$-type conductivity. The resistivity changes by several orders of magnitude as a function of oxidation conditions. Oxyg…
A novel laser molecular beam epitaxy (LMBE) system for the fabrication of atomically controlled oxides superlattices and an x-ray diffractometer that measures spatially-resolved x-ray diffraction spectra have been developed based on the concept of combinatorial methodology. The LMBE chamber has two moving masks, an automated target stage, a substrate heating laser, and an in-situ scanning reflection high-energy electron diffraction system. The x-ray diffractometer with a curved monochromator and two-dimensional detector is used for rapid concurrent x-ray diffraction intensity mapping with the …
Epitaxial thin films of 1T-HfTe2 semimetal are grown by MBE on AlN(0001) substrates. The measured in-plane lattice parameter indicates an unstrained film which is also azimuthally aligned with the AlN substrate, albeit with an in-plane mosaic spread, as it would be expected for van der Waals epitaxy. Angle resolved photoemission spectroscopy combined with first principles electronic band structure calculations show steep linearly dispersing conduction and valence bands which cross near the Brillouin zone center, providing evidence that HfTe2 /AlN is an epitaxial topological Dirac semimetal.
We demonstrate the making of BaZrS3 thin films by molecular beam epitaxy (MBE). BaZrS3 forms in the orthorhombic distorted-perovskite structure with corner-sharing ZrS6 octahedra. The single-step MBE process results in films smooth on the atomic scale, with near-perfect BaZrS3 stoichiometry and an atomically-sharp interface with the LaAlO3 substrate. The films grow epitaxially via two, competing growth modes: buffered epitaxy, with a self-assembled interface layer that relieves the epitaxial strain, and direct epitaxy, with rotated-cube-on-cube growth that accommodates the large lattice consta…
The authors have applied positron annihilation spectroscopy to study the effect of different growth conditions on vacancy formation in In- and N-polar InN grown by plasma-assisted molecular beam epitaxy. The results suggest that the structural quality of the material and limited diffusion of surface adatoms during growth dictate the In vacancy formation in low electron-density undoped epitaxial InN, while growth conditions and thermodynamics have a less important role, contrary to what is observed in, e.g., GaN. Further, the results imply that in high quality InN, the electron mobility is like…
Self-assembled InAs quantum dots (QDs) grown on GaAs(001) surface by molecular beam epitaxy under continuous and growth-interruption modes exhibit two families of QDs, quasi-3D (Q3D) and 3D QDs, whose volume density evolution is quantitatively described by a rate-equation kinetic model. The volume density of small Q3D QDs decreases exponentially with time during the interruption, while the single-dot mean volume of the large QDs increases by Ostwald ripening. The kinetics of growth involves conversion of quasi-3D to 3D QDs at a rate determined by superstress and participation of the wetting la…
We have investigated in-situ Si doping of InAs nanowires grown by molecular beam epitaxy from gold seeds. The effectiveness of n-type doping is confirmed by electrical measurements showing an increase of the electron density with the Si flux. We also observe an increase of the electron density along the nanowires from the tip to the base, attributed to the dopant incorporation on the nanowire facets whereas no detectable incorporation occurs through the seed. Furthermore the Si incorporation strongly influences the lateral growth of the nanowires without giving rise to significant tapering, re…
The growth of atomically-flat thin films of ferroelectric PbTiO3 on SrTiO3 substrates, using molecular beam epitaxy, is reported. The main issue in the growth of these materials is the high volatility of lead. This can be largely overcome by using PbO, instead of Pb, as a source and by using atomic oxygen during growth. The continuous decrease of the out-of-plane lattice parameter with increasing temperature in the investigated range, indicates that PbTiO3 is still ferroelectric at the growth temperature (Tg= 600oC), which agrees with the theoretical prediction of TC= 765oC (compared to TCbulk…
A high sensitivity atom flux sensor based on atomic absorption spectroscopy has been designed and implemented to control electron beam evaporators and effusion cells in a molecular beam epitaxy system. Using a high-resolution spectrometer and a two-dimensional charge coupled device detector in a double-beam configuration, we employ either a non-resonant line or a resonant line with low cross section from the same hollow cathode lamp as the reference for nearly perfect background correction and baseline drift removal. This setup also significantly shortens the warm-up time needed compared to ot…
We investigate the initial growth modes and the role of interfacial electrostatic interactions of EuO epitaxy on MgO(001) by reactive molecular beam epitaxy. A TiO2 interfacial layer is employed to produce high quality epitaxial growth of EuO on MgO(001) with a 45° in plane rotation. For comparison, direct deposition of EuO on MgO, without the TiO2 layer shows a much slower time evolution in producing a single crystal film. Conceptual arguments of electrostatic repulsion of like-ions are introduced to explain the increased EuO quality at the interface with the TiO2 layer. It is shown that ultr…
We present a detailed study of the growth of the tetragonal polymorph of antiferromagnetic CuMnAs by the molecular beam epitaxy technique. We explore the parameter space of growth conditions and their effect on the microstructural and transport properties of the material. We identify its typical structural defects and compare the properties of epitaxial CuMnAs layers grown on GaP, GaAs and Si substrates. Finally, we investigate the correlation between the crystalline quality of CuMnAs and its performance in terms of electrically induced resistance switching.
Molecular beam epitaxy offers an exciting avenue for investigating the behavior of topological semimetal Cd3As2, by providing routes for doping, alloying, strain engineering, and heterostructure formation. To date, however, minimal exploration has been devoted to the impact of defects that are incorporated into epilayers due to contraints imposed by the substrate and narrow growth window. Here, we use a combination of lattice-matched ZnxCd1-xTe buffer layers, miscut substrates and broadband illumination to study how dislocations, twins and point defects influence the electron mobility of Cd3As…
N-polar GaN p-n diodes are realized on single-crystal N-polar GaN bulk wafers by plasma-assisted molecular beam epitaxy growth. The current-voltage characteristics show high-quality rectification and electroluminescence characteristics with a high on/off current ratio and interband photon emission. The measured electroluminescence spectrum is dominated by strong near-band edge emission, while deep level luminescence is greatly suppressed. A very low dislocation density leads to a high reverse breakdown electric field. The low leakage current N-polar diodes open up several potential application…
SnTe topological crystalline insulator nanowires have been grown by molecular beam epitaxy on graphene/SiC substrates. The nanowires have cubic rock-salt structure, they grow along [001] crystallographic direction and have four sidewalls consisting of {100} crystal planes known to host metallic surface states with Dirac dispersion. Thorough high resolution transmission electron microscopy investigations show that the nanowires grow on graphene in the van der Walls epitaxy mode induced when the catalyzing Au nanoparticle mixes with Sn delivered from SnTe flux, providing liquid Au-Sn alloy. The …
Epitaxial growth of BaBiO3 thin films on SrTiO3(001) and MgO(001) substrates using molecular beam epitaxy and controlling their crystal orientations competition
本研究利用分子束外延在SrTiO3(001)和MgO(001)衬底上生长BaBiO3薄膜，揭示了其(001)与(011)取向竞争机制，并提出了阻断(011)取向、实现单一(001)取向可控生长的途径。
We demonstrate nearly-spherical, strain-free, self-assembled Ge quantum dots (QDs) fully encapsulated by AlAs, grown on (100) GaAs by molecular beam epitaxy (MBE). The QDs were formed without a wetting layer using a high temperature, in-situ anneal. Subsequent AlAs overgrowth was free from threading dislocations and anti-phase domains. The straddling band alignment for Ge in AlAs promises strong and tunable confinement for both electrons and holes. The reflection high-energy electron diffraction (RHEED) pattern changed from 2x3 to 2x5 with anneal, which can be explained by surface reconstructi…
First-principles studies often rely on the assumption of equilibrium, which can be a poor approximation, e.g., for growth. Here, an effective chemical potential method for non-equilibrium systems is developed. A salient feature of the theory is that it maintains the equilibrium limits as the correct limit. In application to molecular beam epitaxy, rate equations are solved for the concentrations of small clusters, which serve as feedstock for growth. We find that the effective chemical potential is determined by the most probable, rather than by the lowest-energy, cluster. In the case of Bi2Se…
Epitaxial layers of the topological insulator Bi2Se3 have been grown by molecular beam epitaxy on laterally lattice-matched InP(111)B substrates. High resolution X-ray diffraction shows a significant improvement of Bi2Se3 crystal quality compared to layers deposited on other substrates. The measured full width at half maximum of the rocking curve is Delta omega=13 arcsec, and the (omega-2theta) scans exhibit clear layer thickness fringes. Atomic force microscope images show triangular twin domains with sizes increasing with layer thickness. The structural quality of the domains is confirmed on…
We studied and optimized the molecular beam epitaxy of GaSb layers on vicinal (001) Si substrates using a GaAs nucleation layer. An in-depth analysis of the different growth stages under optimized conditions revealed the formation of a high density of small GaAs islands forming a quasi-two-dimensional layer. GaSb then nucleated atop this layer as three-dimensional islands before turning to two-dimensional growth within a few nanometers. Moreover, reflexion high-energy electron diffraction revealed a fast relaxation of GaAs on Si and of GaSb on GaAs. The GaSb layer quality was better than that …
Molecular beam epitaxy growth of cadmium telluride structures on hexagonal boron nitride
本研究首次实现了在二维六方氮化硼（hBN）衬底上通过分子束外延生长碲化镉（CdTe）量子阱，经氦温光致发光验证其存在，且该生长所需温度比体衬底低70-100℃，为三维半导体在二维衬底上的外延生长提供了新可能。
We observe a catalytic mechanism during the growth of III-O and IV-O materials by suboxide molecular-beam epitaxy ($S$-MBE). By supplying the molecular catalysts In$_2$O and SnO we increase the growth rates of Ga$_2$O$_3$ and In$_2$O$_3$. This catalytic action is explained by a metastable adlayer $A$, which increases the reaction probability of the reactants Ga$_2$O and In$_2$O with active atomic oxygen, leading to an increase of the growth rates of Ga$_2$O$_3$ and In$_2$O$_3$. We derive a model for the growth of binary III-O and IV-O materials by $S$-MBE and apply these findings to a generali…
Antiperovskites, or inverse perovskites, have recently emerged as a material class with a plethora of promising electronic properties. This perspective describes the molecular beam epitaxy (MBE) growth of oxide antiperovskites Sr$_3$PbO and Sr$_3$SnO. We show that MBE offers great potential not only in growing antiperovskites with high structural quality, but also in providing a means to seamlessly connect with advanced characterization tools, including x-ray photoelectron spectroscopy (XPS), low-energy electron diffraction (LEED), reflection high-energy electron diffraction (RHEED), and scann…
Recently, theorists have predicted many materials with a low magnetic moment and large spin-polarization for spintronic applications. These compounds are predicted to form in the inverse Heusler structure, however, many of these compounds have been found to phase segregate. In this study, ordered Cr2CoGa thin films were synthesized without phase segregation using molecular beam epitaxy. The present as-grown films exhibit a low magnetic moment from antiferromagnetically coupled Cr and Co atoms as measured with SQUID magnetometry and soft X-ray magnetic circular dichroism. Electrical measurement…
We demonstrate the self-assembled growth of vertically aligned GaN nanowire ensembles on a flexible Ti foil by plasma-assisted molecular beam epitaxy. The analysis of single nanowires by transmission electron microscopy reveals that they are single crystalline. Low-temperature photoluminescence spectroscopy demonstrates that, in comparison to standard GaN nanowires grown on Si, the nanowires prepared on the Ti foil exhibit a equivalent crystalline perfection, a higher density of basal-plane stacking faults, but a reduced density of inversion domain boundaries. The room-temperature photolumines…
The lattice mismatch between interesting 2D materials and commonly available 3D substrates is one of the obstacles in the epitaxial growth of monolithic 2D/3D heterostructures, but a number of 2D materials have not yet been considered for epitaxy. Here we present the first molecular beam epitaxy growth of NiTe$_{2}$ 2D transition metal dichalcogenide. Importantly, the growth is realized on a nearly lattice matched GaAs(111)B substrate. Structural properties of the grown layers are investigated by electron diffraction, X-ray diffraction, and scanning tunnelling microscopy. Surface coverage and …
Growth of $α-Ga_2O_3$ on $Al_2O_3$ by conventional molecular-beam epitaxy and metal-oxide-catalyzed epitaxy
本研究通过 In 介导的金属氧化物催化外延（MOCATAXY）在 $m$ 面 $Al_2O_3$ 上生长 $α-Ga_2O_3$，相比常规 MBE，显著提升了生长速率、扩大了生长窗口并降低了面外镶嵌展宽。
The addition of boron to GaAs nanowires grown by self-catalyzed molecular beam epitaxy was found to have a strong effect on the nanowire morphology, with axial growth greatly reduced as the nominal boron concentration was increased. Transmission electron microscopy measurements show that the Ga catalyst droplet was unintentionally consumed during growth. Concurrent radial growth, a rough surface morphology and tapering of nanowires grown under boron flux suggest that this droplet consumption is due to reduced Ga adatom diffusion on the nanowire sidewalls in the presence of boron. Modelling of …
Materials with perpendicular magnetic anisotropy (PMA) effect with high Curie temperature ($T_C$) is essential in applications. In this work, $Cr_2Te_3$ thin films showing PMA with $T_C$ ranging from 165 K to 295 K were successfully grown on $Al_2O_3$ by the molecular beam epitaxy (MBE) technique. The structural analysis, magneto-transport and magnetic characterizations were conducted to study the physical origin of the improved $T_C$. In particular, ferromagnetic (FM) and antiferromagnetic (AFM) ordering competition were investigated. A phenomenological model based on the coupling degree betw…
Hexagonal boron nitride (h-BN) is a layered two-dimensional material with properties that make it promising as a dielectric in various applications. We report the growth of h-BN films on Ni foils from elemental B and N using molecular beam epitaxy. The presence of crystalline h-BN over the entire substrate is confirmed by Raman spectroscopy. Atomic force microscopy is used to examine the morphology and continuity of the synthesized films. A scanning electron microscopy study of films obtained using shorter depositions offers insight into the nucleation and growth behavior of h-BN on the Ni sub…
Materials with a layered Kagome lattice are expected to give rise to novel physics arising from band structures with topological properties, spin liquid behavior and the formation of skyrmions. Until now, most work on Kagome materials has been performed on bulk samples due to difficulties in thin film synthesis. Here, by using molecular beam epitaxy, layered Kagome-structured FeSn films are synthesized on (111) oriented LaAlO3 substrate. Both in-situ and ex-situ characterizations indicate these films are highly crystalline and c-axis oriented, with atomically smooth surfaces. However, the film…
High-kinetic energy impacts between inorganic surfaces and molecular beams seeded by organics represent a fundamental case study in materials science, most notably when they activate chemical-physical processes leading to nanocrystals growth. Here we demonstrate single-layer graphene synthesis on copper by C60 supersonic molecular beam (SuMBE) epitaxy at 645 °C, with the possibility of further reduction. Using a variety of electron spectroscopy and microscopy techniques, and first-principles simulations, we describe the chemical-physical mechanisms activated by SuMBE resulting in graphene grow…
GaAs:Mn nanowires were obtained on GaAs(001) and GaAs(111)B substrates by molecular beam epitaxial growth of (Ga,Mn)As at conditions leading to MnAs phase separation. Their density is proportional to the density of catalyzing MnAs nanoislands, which can be controlled by the Mn flux and/or the substrate temperature. Being rooted in the ferromagnetic semiconductor (Ga,Mn)As, the nanowires combine one-dimensional properties with the magnetic properties of (Ga,Mn)As and provide natural, self assembled structures for nanospintronics.
The effect of film morphology on its surface chemistry and band structure has been analyzed for gallium nitride epitaxial films grown by molecular beam epitaxy. The film morphology has been studied using scanning electron microscopy and atomic force microscopy, and the bandstructure, defect and emission properties have been studied by X ray photoelectron spectroscopy and cathodoluminescence spectroscopy. It was found that the highly porous GaN nanowall network shows the highest relative conductivity and does not have defect related luminescence. The flatter films were more resistive and showed…
Interests in two-dimensional transition-metal dichalcogenides have prompted some recent efforts to grow ultrathin layers of these materials epitaxially using molecular-beam epitaxy. However, growths of monolayer and bilayer WSe2, an important member of the transition-metal dichalcogenides family, by the molecular-beam epitaxy method remain uncharted probably because of the difficulty in generating tungsten fluxes from the elemental source. In this work, we present a scanning tunneling microscopy and spectroscopy study of molecular-beam epitaxy-grown WSe2 monolayer and bilayer, showing atomical…
Here, we report a detailed method of growing LaAlGe, a non-magnetic Weyl semimetal, thin film on silicon(100) substrates by molecular beam epitaxy and their structural and electrical characterizations. 50 nm thick LaAlGe films were deposited and annealed for 16 hours in situ at a temperature 793 K. As-grown high-quality films showed uniform surface topography and near ideal stoichiometry with a body-centered tetragonal crystal structure. Temperature-dependent longitudinal resistivity can be understood with dominant interband s-d electron-phonon scattering in the temperature range 5-40 K. Hall …
We investigate the effect of the formation of metal droplets on the growth dynamics of InGaN by Plasma-Assisted Molecular Beam Epitaxy (PAMBE) at low temperatures (T = 450°C). We find that the presence of droplets on the growth surface strongly affects the adatom incorporation dynamics, making the growth rate a decreasing function of the overall metal flux impinging on the surface as soon as the metal dose exceeds the critical amount required for the nucleation of droplets. We explain this phenomenon via a model that takes into account droplet effects on the incorporation of metal adatoms into…
InGaAs/GaAsBi/InGaAs quantum wells (QWs) were grown on GaAs substrates by gas source molecular beam epitaxy for realizing the type II band-edge line-up. Both type I and type II transitions were observed in the Bi containing W QWs and the photoluminescence intensity was enhanced in the sample with a high Bi content, which is mainly due to the improvement of carrier confinement. Blue-shift of type II transitions at high excitation power density was observed and ascribed to the band-bending effect. The calculated transition energies based on 8 band k.p model fit well with the experiment results. …
We demonstrate the growth of thin films of molybdenum ditelluride and molybdenum diselenide on sapphire substrates by molecular beam epitaxy. In-situ structural and chemical analyses reveal stoichiometric layered film growth with atomically smooth surface morphologies. Film growth along the (001) direction is confirmed by X-ray diffraction, and the crystalline nature of growth in the 2H phase is evident from Raman spectroscopy. Transmission electron microscopy is used to confirm the layered film structure and hexagonal arrangement of surface atoms. Temperature dependent electrical measurements…
Hexagonal boron nitride (hBN) has been grown on sapphire substrates by ultra-high temperature molecular beam epitaxy (MBE). A wide range of substrate temperatures and boron fluxes have been explored, revealing that high crystalline quality hBN layers are grown at high substrate temperatures, $>$1600$^\circ$C, and low boron fluxes, $\sim1\times10^{-8}$ Torr beam equivalent pressure. \emph{In-situ} reflection high energy electron diffraction (RHEED) revealed the growth of hBN layers with $60^\circ$ rotational symmetry and the $[11\bar20]$ axis of hBN parallel to the $[1\bar100]$ axis of the sapp…
Epitaxial La doped BaSnO3 films were grown in an adsorption controlled regime by molecular beam epitaxy, where the excess volatile SnOx desorbs from the film surface. A film grown on a (001) DyScO3 substrate exhibited a mobility of 183 cm^2 V^-1 s^-1 at room temperature and 400 cm^2 V^-1 s^-1 at 10 K, despite the high concentration (1.2x10^11 cm^-2) of threading dislocations present. In comparison to other reports, we observe a much lower concentration of (BaO)2 Ruddlesden Popper crystallographic shear faults. This suggests that in addition to threading dislocations that other defects possibly…
Relying on the magnetism induced by the proximity effect in heterostructures of topological insulators and magnetic insulators is one of the promising routes to achieve the quantum anomalous Hall effect. Here we investigate heterostructures of Bi$_2$Te$_3$ and Fe$_3$O$_4$. By growing two different types of heterostructures by molecular beam epitaxy, Fe$_3$O$_4$ on Bi$_2$Te$_3$ and Bi$_2$Te$_3$ on Fe$_3$O$_4$, we explore differences in chemical stability, crystalline quality, electronic structure, and transport properties. We find the heterostructure Bi$_2$Te$_3$ on Fe$_3$O$_4$ to be a more via…
For electrical spin injection and detection of spin-polarized electrons in silicon, we explore highly epitaxial growth of ferromagnetic full-Heusler-alloy Co2FeSi thin films on silicon substrates using low-temperature molecular beam epitaxy (LTMBE). Although in-situ reflection high energy electron diffraction images clearly show two-dimensional epitaxial growth for growth temperatures T_G of 60, 130, and 200 C, cross-sectional transmission electron microscopy experiments reveal that there are single-crystal phases other than Heusler alloys near the interface between Co_2FeSi and Si for T_G = 1…
RF plasma assisted MBE growth of Scandium Nitride (ScN) thin films on GaN (0001)/SiC, AlN (0001)/Al2O3 and on 6H-SiC (0001) hexagonal substrates is found to lead to a face centered cubic (rock-salt) crystal structure with (111) out-of-plane orientation instead of hexagonal orientation. For the first time, cubic (111) twinned patterns in ScN are observed by in-situ electron diffraction during epitaxy, and the twin domains in ScN are detected by electron backscattered diffraction, and further corroborated with X-ray diffraction. The epitaxial ScN films display very smooth, sub nanometer surface …
We studied structural, optical and magnetic properties of high-quality 5 and 15% Co-doped ZnO films grown by plasma-assisted molecular beam epitaxy (MBE) on (0001)-sapphire substrates. Magnetic force microscopy (MFM) and magnetic measurements with SQUID magnetometer show clear ferromagnetic behavior of the films up to room temperature whereas they are antiferromagnetic below 200 K approximately. Temperature dependence of the carrier mobility was determined using Raman line shape analysis of the longitudinal-optical-phonon-plasmon coupled modes. It shows that the microscopic mechanism for ferro…
We report growth of CuMnSb thin films by molecular beam epitaxy on InAs(001) substrates. The CuMnSb layers are compressively strained ($0.6~\text{%}$) due to lattice mismatch. The thin films have a $ω$ full width half max of $7.7^{''}$ according to high resolution X-ray diffraction, and a root mean square roughness of $0.14~\text{nm}$ as determined by atomic force microscopy. Magnetic and electrical properties are found to be consistent with reported values from bulk samples. We find a Néel temperature of $62~\text{K}$, a Curie-Weiss temperature of $-65~\text{K}$ and an effective moment of $5.…
Structural and optical properties of in situ Eu-doped ZnCdO/ZnMgO superlattices grown by plasma-assisted molecular beam epitaxy
该研究采用等离子体辅助分子束外延技术，制备了具有不同子层厚度的原位Eu掺杂ZnCdO-ZnMgO超晶格，为探究其结构和光学性质提供了基础。
Liquid-Metal-Enabled Synthesis of Aluminum-Containing III-Nitrides by Plasma-Assisted Molecular Beam Epitaxy
针对富铝氮化物薄膜结晶质量差、p型掺杂难的问题，提出液态金属赋能的等离子体辅助分子束外延法，实现了高结晶质量、高掺杂的含铝氮化物薄膜生长，为高性能光电器件提供支撑。
We show that reflection high-energy electron diffraction (RHEED) can be used as a highly sensitive tool to track surface and resulting film stoichiometry in adsorption-limited molecular beam epitaxy of (001) SrTiO3 thin films. Even under growth conditions that yield films with a lattice parameter that is identical to that of stoichiometric bulk crystals within the detection limit of high-resolution x-ray diffraction (XRD), changes in surface reconstruction occur from (1x1) to (2x1) to c(4x4) as the equivalent beam pressure of the Ti metalorganic source is increased. These surface reconstructio…
We have investigated the growth of BaTiO3 thin films deposited on pure and 1% Nb-doped SrTiO3(001) single crystals using atomic oxygen assisted molecular beam epitaxy (AO-MBE) and dedicated Ba and Ti Knudsen cells. Thicknesses up to 30 nm were investigated for various layer compositions. We demonstrate 2D growth and epitaxial single crystalline BaTiO3 layers up to 10 nm before additional 3D features appear; lattice parameter relaxation occurs during the first few nanometers and is completed at »10 nm. The presence of a Ba oxide rich top layer that probably favors 2D growth is evidenced for wel…
Atomically thin PtSe2 films have attracted extensive research interests for potential applications in high-speed electronics, spintronics and photodetectors. Obtaining high quality, single crystalline thin films with large size is critical. Here we report the first successful layer-by-layer growth of high quality PtSe2 films by molecular beam epitaxy. Atomically thin films from 1 ML to 22 ML have been grown and characterized by low-energy electron diffraction, Raman spectroscopy and X-ray photoemission spectroscopy. Moreover, a systematic thickness dependent study of the electronic structure i…
High-temperature growth of GaN nanowires by molecular beam epitaxy: toward the materials quality of bulk GaN
针对分子束外延中高温下GaN纳米线自发生长孵育时间长的问题，提出三种非常规生长方法实现最高875℃生长，所得纳米线光学质量媲美先进自支撑GaN层。
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。