Hysteretic magneto-resistance of point contacts formed between non-magnetic tips and single ferromagnetic films exchange-pinned by antiferromagnetic films is investigated. The analysis of the measured current driven and field driven hysteresis agrees with the recently proposed model of the surface spin-valve, where the spin orientation at the interface can be different from that in the bulk of the film. The switching in magneto-resistance at low fields is observed to depend significantly on the direction of the exchange pinning, which allows identifying this transition as a reversal of interior spins of the pinned ferromagnetic films. The switching at higher fields is thus due to a spin reversal in the point contact core, at the top surface of the ferromagnet, and does not exhibit any clear field offset when the exchange-pinning direction or the magnetic field direction is varied. This magnitude of the switching field of the surface spins varies substantially from contact to contact and sometimes from sweep to sweep, which suggests that the surface coercivity can change under very high current densities and/or due to the particular microstructure of the point contact. In contrast, no changes in the effect of the exchange biasing on the interior spins are observed at high currents, possibly due to the rapid drop in the current density away from nanometer sized point contact cores.
We theoretically study the spin current and spin-transfer torque generation in a conventional spin- valve hybrid structure of type ferromagnetic/normal metal/ferromagnetic (FM/NM/FM) made of the topological insulator (TI), in which a gate voltage is attached to the normal layer. We demonstrate the penetration of the spin-transfer torque into the right ferromagnetic layer and show that, unlike graphene spin-valve junction, the spin-transfer torque in TI is very sensitive to the chemical potential of the NM region. As an important result, by changing the chemical potential of the NM spacer and m…
Using a multilayer structure containing (cobalt detector layer)/(copper spacer)/(Permalloy source layer), we show experimentally how the non-reorientable spin-orbit torque generated by the Permalloy source layer (the component of spin-orbit torque that does not change when the Permalloy magnetization is rotated) can be measured using spin-torque ferromagnetic resonance (ST-FMR) with lineshape analysis. We find that dynamic spin pumping between the magnetic layers exerts torques on the magnetic layers as large or larger than the spin-orbit torques, so that if dynamic spin pumping is neglected t…
Spin orbit torques are of great interest for switching the magnetization direction in nanostructures, moving skyrmions and exciting spin waves. The standard method of determining their efficiency is by spin torque ferromagnetic resonance (ST-FMR), a technique that involves analyzing the resonance linewidth or lineshape. On microstuctures these two analysis methods are quite consistent. Here we present ST-FMR results on permalloy (Ni$_{80}$Fe$_{20}$) nanowires -- with widths varying from $150$ to 800 nm -- that show that the standard model used to analyze the resonance linewidth and lineshape g…
Spin-torque oscillators are strong candidates as nano-scale microwave generators and detectors. However, because of large amplitude-phase coupling (non-linearity), phase noise is enhanced over other linear auto-oscillators. One way to reduce nonlinearity is to use ferromagnetic layers as a resonator and excite them at localized spots, making a resonator-excitor pair. We investigated the excitation of oscillations in dipole-coupled ferromagnetic layers, driven by localized current at ferromagnetic nano-contacts. Oscillations possessed properties of optical-mode spin-waves and at low field ($\ap…
Spin-orbit torques in bilayers of ferromagnetic and nonmagnetic materials hold promise for energy efficient switching of magnetization in nonvolatile magnetic memories. Previously studied spin Hall and Rashba torques originate from spin-orbit interactions within the nonmagnetic material and at the bilayer interface, respectively. Here we report a spin-orbit torque that arises from planar Hall current in the ferromagnetic material of the bilayer and acts as either positive or negative magnetic damping. This planar Hall torque exhibits unusual biaxial symmetry in the plane defined by the applied…
Spin-orbit torque switching without external field with a ferromagnetic exchange-biased coupling layer
通过自旋-轨道力矩（SOT）的垂直铁磁自由层的磁化反转是磁性随机存取存储器（MRAM）中自旋转移力矩（STT）切换的有吸引力的替代方案，其中写入过程涉及使高电流穿过磁阻隧道势垒。确定性SOT开关通常需要一个小的击穿偏置场，但在自旋电子学应用中从外部产生场是不切实际的。在这里，我们展示了强大的零场SOT开关的垂直Co 90 Fe 10（CoFe）自由层的对称性被打破的磁耦合到第二个面内交换偏置的CoFe层通过一个钌间隔。自由层的优选磁性状态由电流极性和层间交换耦合（IEC）的性质确定。我们的战略提供了一个可扩展的解决方案，以实现无偏置场的SOT开关，可以导致一代基于SOT的设备，结合高存储密度和耐久性与潜在的低功耗。
We investigate a possible correlation between spin orbit torque (SOT) and exchange-bias (EB) in IrMn-layer/ferromagnetic-ribbon heterostructure by performing magnetoimpedance (MI) measurements. To uncover this correlation, we benefit from EB training effect probed by MI effect at room temperature. A damping-like SOT driven by ac current through the antiferromagnetic IrMn applies to the ferromagnetic ribbon layer, determined by MI magnetic field and frequency sweeps. Importantly, magnitude of the SOT is observed to remain intact against EB training and decrease of EB through alternative magneti…
Spin-torque ferromagnetic resonance (ST-FMR) is a common method used to measure spin-orbit torques (SOTs) in heavy metal/ferromagnet bilayer structures. In the course of a measurement, other resonant processes such as spin pumping (SP) and heating can cause spin current or heat flows between the layers, inducing additional resonant voltage signals via the inverse spin Hall effect (ISHE) and Nernst effects (NE). In the standard ST-FMR geometry, these extra artifacts exhibit a dependence on the angle of an in-plane magnetic field that is identical to the rectification signal from the SOTs. We sh…
When spin-orbit torques are measured using spin-torque ferromagnetic resonance (ST-FMR), two alternative ways of analyzing the results to extract the torque efficiencies -- lineshape analysis and analysis of the change in linewidth versus DC current -- often give inconsistent results. We identify a source for these inconsistencies. We show that fits of ST-FMR data to the standard analysis framework leave significant residuals that we identify as due to (i) current-induced excitations of a small volume of magnetic material with magnetic damping much larger than the bulk of the magnetic layer, t…
In ferromagnetic trilayers, a spin-orbit-induced spin current can have a spin polarization of which direction is deviated from that for the spin Hall effect. Recently, magnetization switching in ferromagnetic trilayers has been proposed and confirmed by the experiments. In this work, we theoretically and numerically investigate the switching current required for perpendicular magnetization switching in ferromagnetic trilayers. We confirm that the tilted spin polarization enables field-free deterministic switching at a lower current than conventional spin-orbit torque or spin-transfer torque sw…
We investigate spin-charge conversion phenomena in hybrid structures of topological insulator (TI) thin films and magnetic insulators. We find an anisotropic inverse spin-galvanic effect (ISGE) that yields a highly tunable spin-orbit torque (SOT). Concentrating on the quasiballistic limit, we also predict a giant anisotropic magnetoresistance (AMR) at low dopings. These effects, which have no counterparts in thick TIs, depend on the simultaneous presence of the hybridization between the surface states and the in-plane magnetization. Both the ISGE and AMR exhibit a strong dependence on the magn…
Spin-orbit coupling in inversion-asymmetric magnetic crystals and structures has emerged as a powerful tool to generate complex magnetic textures, interconvert charge and spin under applied current, and control magnetization dynamics. Current-induced spin-orbit torques mediate the transfer of angular momentum from the lattice to the spin system, leading to sustained magnetic oscillations or switching of ferromagnetic as well as antiferromagnetic structures. The manipulation of magnetic order, domain walls and skyrmions by spin-orbit torques provides evidence of the microscopic interactions bet…
Interface-driven spin-torque ferromagnetic resonance by Rashba coupling at the interface between non-magnetic materials
Rashba-Edelstein效应源于电子的自旋与其动量之间的相互作用，该相互作用由界面或表面处的自旋-轨道相互作用引起。结果表明，逆Rashba-Edelstein效应可用于将自旋电流转换为电荷电流。在这里，我们证明了Bi/Ag Rashba接口甚至可以驱动相邻的铁磁体共振。我们采用了自旋扭矩铁磁共振激发/检测计划，这是最初开发的散装自旋轨道效应，自旋霍尔效应。在我们的实验中，直接Rashba-Edelstein效应从驱动相邻坡莫合金（Py，Ni 80 Fe 20）层中的磁化旋进的交变充电电流产生振荡自旋电流。磁化动态的电检测是通过由各向异性磁阻引起的时间相关的多层电阻的整流机制来实现的。
Spin torque and spin Hall effect nanooscillators generate high intensity spin wave auto oscillations on the nanoscale enabling novel microwave applications in spintronics, magnonics, and neuromorphic computing. For their operation, these devices require externally generated spin currents either from an additional ferromagnetic layer or a material with a high spin Hall angle. Here we demonstrate highly coherent field and current tunable microwave signals from nanoconstrictions in single 15 and 20 nm thick permalloy layers. Using a combination of spin torque ferromagnetic resonance measurements,…
Ferromagnetic spin-valves and tunneling junctions are crucial for spintronics applications and are one of the most fundamental spintronics devices. Motivated by the potential unique advantages of antiferromagnets for spintronics, we theoretically study here junctions built out of non-collinear antiferromagnets. We demonstrate a large and robust magnetoresistance and spin-transfer torque capable of ultrafast switching between parallel and anti-parallel states of the junction. In addition, we show that the non-collinear order results in a spin-transfer torque that is in several key aspects diffe…
The electrical detection of spin torque ferromagnetic resonance (st-FMR) is becoming a popular method for measuring the spin-Hall angle of heavy metals (HM). However, various sensible analysis on the same material with either the same or different experimental setups yielded different spin-Hall angles with large discrepancy, indicating some missing ingredients in our current understanding of st-FMR. Here we carry out a careful analysis of electrical signals of the st-FMR in a HM/ferromagnet (HM/FM) bilayer with an arbitrary magnetic anisotropy. The FM magnetization is driven by two radio-frequ…
Magnetic fingerprint in a ferromagnetic wire: Spin torque diode effect and induction of the DC voltage spectrum inherent in the wire under application for RF current
Dependence of the Efficiency of Spin Hall Torque on the Transparency of Pt-Ferromagnetic Layer Interfaces
我们报告说，自旋电流传输跨铂铁磁体（FM）接口是强烈依赖于FM层的类型和厚度和后沉积处理协议。通过采用谐波电压测量和自旋扭矩铁磁共振测量，我们发现，在不同的界面条件下，Pt自旋霍尔效应施加阻尼类自旋扭矩FM的效率范围从< 0.05 to >0.10。我们还表明，温度依赖性的自旋扭矩效率的阻尼类扭矩和类场扭矩是依赖于Pt-FM接口的细节。在考虑界面自旋传输因子后，本研究中使用的Pt薄膜的“内部”自旋霍尔角估计为~ 0.20。这表明Pt-FM界面的精心设计可以提高Pt基自旋电子器件的自旋霍尔扭矩效率。
The conversion of spin information into electrical signals is indispensable for spintronic technologies. Spin-to-charge conversion in ferromagnetic tunnel contacts is well-described using linear (spin-)transport equations, provided that there is no applied bias, as in nonlocal spin detection. It is shown here that in a biased ferromagnetic tunnel contact, spin detection is strongly nonlinear. As a result, the spin-detection efficiency is not equal to the tunnel spin polarization. In silicon-based 4-terminal spin-transport devices, even a small bias (tens of mV) across the Fe/MgO detector conta…
We use micro-focus Brillouin light scattering spectroscopy to study the effects of spin-orbit torque on thermal spin waves in almost angular-momentum compensated ferrimagnetic CoGd alloy films. The spin-orbit torque is produced by the electric current flowing in the Pt layer adjacent to CoGd. Both the ferromagnetic and the exchange modes are detected in our measurements. The intensity and the linewidth of the ferromagnetic mode are modified by the spin-orbit torque. In contrast, the properties of the exchange mode are unaffected by the spin-orbit torque. We also find that the frequencies and t…
Spin-orbit torque in heavy metal/ferromagnet heterostructures with broken spatial inversion symmetry provides an efficient mechanism for manipulating magnetization using a charge current. Here, we report the presence of a spin torque in a single ferromagnetic layer in both asymmetric MgO/Fe0.8Mn0.2 and symmetric MgO/Fe0.8Mn0.2/MgO structures, which manifests itself in the form of an effective field transverse to the charge current. The current to effective field conversion efficiency, which is characterized using both the nonlinear magnetoresistance and second-order planar Hall effect methods,…
We study spin-dependent electron transport through a ferromagnetic-antiferromagnetic-normal metal tunneling junction subject to a voltage or temperature bias, in the absence of spin-orbit coupling. We derive microscopic formulas for various types of spin torque acting on the antiferromagnet as well as for charge and spin currents flowing through the junction. The obtained results are applicable in the limit of slow magnetization dynamics. We identify a parameter regime in which an unconventional damping-like torque can become comparable in magnitude to the equivalent of the conventional Sloncz…
Measurements of spin-orbit torques in a ferromagnetic/nonmagnetic multilayer are typically based on an assumption that the entire ferromagnetic layer uniformly responds to the spin-orbit torque. This assumption breaks down when the thickness of the ferromagnetic layer is comparable to the dynamic exchange coupling length, which can be as short as a few nanometers in certain measurement geometries. The nonuniform magnetization reorientation coupled with nonuniform contribution of each magnetic sublayer to the magnetoresistance or the Kerr effect may impact the accuracy in the extrapolation of s…
We present a phenomenological theory of spin-orbit torques in a metallic ferromagnet with spin-relaxing boundaries. The model is rooted in the coupled diffusion of charge and spin in the bulk of the ferromagnet, where we account for the anomalous Hall effects as well as the anisotropic magnetoresistance in the corresponding constitutive relations for both charge and spin sectors. The diffusion equations are supplemented with suitable boundary conditions reflecting the spin-sink capacity of the environment. In inversion-asymmetric heterostructures, the uncompensated spin accumulation exerts a d…
