Recent work suggested that head-to-head and tail-to-tail domain walls could be induced to form in ferroelectric superlattices by introducing compensating "delta doping" layers via chemical substitution in specified atomic planes [Phys. Rev. B 73, 020103(R), 2006]. Here we investigate a variation of this approach in which superlattices are formed of alternately stacked groups of II-IV and I-V perovskite layers, and the "polar discontinuity" at the II-IV/I-V interface effectively provides the delta-doping layer. Using first-principles calculations on SrTiO3/KNbO3 as a model system, we show that this strategy allows for the growth of a superlattice with stable polarized regions and large polarization discontinuities at the internal interfaces. We also generalize a Wannier-based definition of layer polarizations in perovskite superlattices [Phys. Rev. Lett. 97, 107602 (2006)] to the case in which some (e.g., KO or NbO2) layers are non-neutral, and apply this method to quantify the local variations in polarization in the proposed SrTiO3/KNbO3 superlattice system.
The stability of high-symmetry $P4mm$ polar phase in eleven ferroelectric perovskite superlattices with the polar discontinuity is studied from first principles. In most superlattices, this phase exhibits either the ferroelectric or the antiferrodistortive instability, or both of them. The structure of the ground state and, for a number of systems, also of metastable phases in these superlattices is found. The spontaneous polarization and piezoelectric properties of superlattices are calculated. The appearance of high piezoelectric coefficients (up to 150-270 pC/N) in some superlattices is ass…
Based on the locality principle of insulating superlattices, we apply the method of Wu {\it et al} [Phys. Rev. Letter {\bf 101}, 087610 (2008)] to the piezoelectric strains of individual layers under fixed displacement field. For a superlattice of arbitrary stacking sequence an accurate model is acquired for predicting piezoelectricity. By applying the model in the superlattices where ferroelectric and antiferrodistortive modes are in competition, functional piezoelectricity can be achieved. A strong nonlinear effect is observed and can be further engineered in the PbTiO$_3$/SrTiO$_3$ superlat…
Interface engineering in perovskite oxide superlattices has developed into a flourishing field, enabling not only further tuning of the exceptional properties, but also giving access to emergent physical phenomena. Here, we reveal a new mechanism for enhancing the electric polarization by the interface-induced oxygen octahedral tilts in BaTiO3/CaTiO3 superlattices. By combining a novel genetic algorithm with density functional theory (DFT), we predict that the true ground states in 1:1 and 2:2 BaTiO3/CaTiO3 superlattices grown on SrTiO3 adopt Pc symmetry with a large proper electric polarizati…
In the development of first-principles high-throughput searches for materials with desirable functional properties, there is a clear need for an efficient method to determine the ground state and low-energy alternative structures of superlattices. A method based on a simple strategy -- to generate starting structures based on low-energy structures of the constituent compounds, which are then optimized via structural relaxation calculations -- is proposed. This "stacking method" is demonstrated on the 2:2 PbTiO$_3$/SrTiO$_3$ superlattice, which has been the subject of recent experimental and th…
In insulators, the method of Marzari and Vanderbilt [Phys. Rev. B {\bf 56}, 12847 (1997)] can be used to generate maximally localized Wannier functions whose centers are related to the electronic polarization. In the case of layered insulators, this approach can be adapted to provide a natural definition of the local polarization associated with each layer, based on the locations of the nuclear charges and one-dimensional Wannier centers comprising each layer. Here, we use this approach to compute and analyze layer polarizations of ferroelectric perovskite superlattices, including changes in l…
In ABO3 perovskites, oxygen octahedron rotations are common structural distortions that can promote large ferroelectricity in BiFeO3 with an R3c structure [1], but suppress ferroelectricity in CaTiO3 with a Pbnm symmetry [2]. For many CaTiO3-like perovskites, the BiFeO3 structure is a metastable phase. Here, we report the stabilization of the highly-polar BiFeO3-like phase of CaTiO3 in a BaTiO3/CaTiO3 superlattice grown on a SrTiO3 substrate. The stabilization is realized by a reconstruction of oxygen octahedron rotations at the interface from the pattern of nonpolar bulk CaTiO3 to a different…
Discovering materials that display a linear magnetoelectric effect at room temperature is challenge. Such materials could facilitate novel devices based on the electric-field control of magnetism. Here we present simple, chemically intuitive design rules to identify a new class of bulk magnetoelectric materials based on the 'bicolor' layering of $Pnma$ ferrite perovskites, e.g., LaFeO$_3$/ LnFeO$_3$ superlattices for which Ln = lanthanide cation. We use first-principles density-functional theory calculations to confirm these ideas. Additionally, we elucidate the origin of this effect and show …
Results from dielectric and structural measurements on epitaxial SrTiO$_3$/BaZrO$_3$ superlattices reveal properties that cannot be explained simply in terms of those measured on single films of the constituent materials. For large superlattice periodicities (20/20 and 38/38 structures, i.e. samples in which each SrTiO3 and BaZrO3 layer are 20 or 38 unit cells thick, respectively), the capacitance-voltage curves indicate room-temperature ferroelectricity. For smaller periodicities (7/7 and 15/15), anti-ferroelectric-type behavior is observed, suggesting strong coupling between individual polar…
Using first-principles density functional theory, we study piezoelectricity in short-period superlattices made with combination of ferroelectric and paraelectric components and exhibiting polar discontinuities. We show that piezoelectric response of such a superlattice can be tuned both in terms of sign and magnitude with a choice of its components. As these superlattices with nonswitchable polarization do not undergo ferroelectric transitions, we predict them to exhibit a robust piezoelectric response with weaker temperature dependence compared to their bulk counterparts.
The stability of a high-symmetry $P4mm$ polar phase in seventeen short-period ferroelectric perovskite superlattices with polar discontinuity is studied from first principles within the density-functional theory. It is shown that in most superlattices this phase exhibits either the ferroelectric instability or the antiferrodistortive one, or both of them. For each superlattice, the ground-state structure, the structure of possible metastable phases, the spontaneous polarization, and piezoelectric properties are calculated. The properties of superlattices with the polar discontinuity are compar…
We carry out first-principles calculations of the nonlinear dielectric response of short-period ferroelectric superlattices. We compute and store not only the total polarization, but also the Wannier-based polarizations of individual atomic layers, as a function of electric displacement field, and use this information to construct a model capable of predicting the nonlinear dielectric response of an arbitrary superlattice sequence. We demonstrate the successful application of our approach to superlattices composed of SrTiO$_3$, CaTiO$_3$, and BaTiO$_3$ layers.
In this work, we use density functional theory calculations to demonstrate how spontaneous electric polarizations can be induced \textit{via} a hybrid improper ferroelectric mechanism in iodide perovskites, a family well-known to display solar-optimal band gaps, to create new materials for photoferroic applications. We first assemble three chemically distinct ($A$$A^{\prime}$)($B$$B^{\prime}$)I$_6$ double perovskites using centrosymmetric $AB$I$_3$ perovskite iodides (where $A$ = Cs, Rb, K and $B$ = Sn, Ge) as building units. In each superlattice, we investigate the effects of three types of $…
We do a search for topological insulators which are associated with ferromagnetic ordering and show anomalous quantum Hall effect, among transition metal oxide superlattices taking the parent compounds as LaAlO3 and SrTiO3. Among the various superlattices which are studied here, (LaAlO3)10/(LaOsO3)2 exhibits a ferromagnetic ground state with a topologically non-trivial energy gap when a spin-orbit interaction is turned on. The study of transverse conductivity shows that the system has quantized Hall conductivity inside the topological energy gap without applying any external magnetic field. Th…
Taking into account Goodenough's superexchange rules, including both full structural relaxation and spin-orbit coupling, and checking strong correlation effects, we look for compensated half metals within the class of oxide double perovskites materials. Identifying likely half metallic (or half semimetallic) antiferromagnets, the full complications including orbital magnetism are included in order to arrive at realistic predictions of designed magnetic compounds with (near) vanishing net moment. After sorting through several candidates that have not been considered previously, two materials, K…
We propose to insert TiO layers to perovskite ATiO$_{3}$ to form a superlattice and use first-principles calculations to investigate its basic properties. Our computational analysis shows that the structure, which consists of repeated ATiO_{3} and TiO layers, has strong anisotropic conductivity. The structure immediately suggests a possible control of its conductivity by ion displacements related to its intrinsic ferroelectricity. In addition, we have obtained the structural information of its low-energy phases with the aid of phonon calculation and examined their evolution with epitaxial stra…
We report the fabrication of (111)-oriented superlattice structures with alternating 2m-layers (m = 1, 2, and 3) of Ca0.5Sr0.5IrO3 perovskite and two layers of SrTiO3 perovskite on SrTiO3(111) substrates. In the case of m = 1 bilayer films, the Ir sub-lattice is a buckled honeycomb, where a topological state may be anticipated. The successful growth of superlattice structures on an atomic level along the [111] direction was clearly demonstrated by superlattice reflections in x-ray diffraction patterns and by atomically-resolved transmission electron microscope images. The ground states of the …
We report the structural and magnetoelectrical properties of La$_{0.7}$Ca$_{0.3}$MnO$_3$/BaTiO$_3$ perovskite superlattices grown on (001)-oriented SrTiO$_3$ by the pulsed laser deposition technique. Magnetic hysteresis loops together with temperature dependent magnetic properties exhibit well-defined coercivity and magnetic transition temperature (T$_C$) \symbol{126}140 K. $DC$ electrical studies of films show that the magnetoresistance (MR) is dependent on the BaTiO$_3$ thickness and negative $MR$ as high as 30% at 100K are observed. The $AC$ electrical studies reveal that the impedance and …
Perovskite oxide heterostructures offer an important path forward for stabilizing and controlling low-dimensional magnetism. One of the guiding design principles for these materials systems is octahedral connectivity. In superlattices composed of perovskites with different crystal symmetries, variation of the relative ratio of the constituent layers as well as the individual layer thicknesses gives rise to non-equilibrium crystal symmetries that, in turn, lead to unprecedented control of interfacial ferromagnetism. We have found that in superlattices of CaMnO$_3$ (CMO) and LaNiO$_3$ (LNO), int…
Using first principles calculations, we investigate the electronic and magnetic properties of the trigonally distorted (R-3c) perovskite-derived NiCrO$_3$. Within the local spin density approximation (LSDA), our calculations show that this system is an exactly compensated half-metal (CHM). The local spin moments of Cr 2.04, and antialigned Ni -1.41 and three oxygens -0.63 (in the units of $μ_B$), indicate high spin S=3/2 Cr$^{3+}$ and S=3/2 (NiO$_3$)$^{3-}$ units. Considering reasonable values of the on-site Coulomb repulsion U on both Ni and Cr ions with LDA+U approach, this system becomes an…
The defect stability in a prototypical perovskite oxide superlattice consisting of SrTiO$_3$ and PbTiO$_3$ (STO/PTO) is determined using first principles density functional theory calculations. Specifically, the oxygen vacancy formation energies E$_v$ in the paraelectric and ferroelectric phases of a superlattice with four atomic layers of STO and four layers of PTO (4STO/4PTO) are determined and compared. The effects of charge state, octahedral rotation, polarization, and interfaces on the E$_v$ are examined. The formation energies vary layer-by-layer in the superlattices, with E$_v$ being hi…
Complex polar structures of incommensurate modulations (ICMs) are revealed in chemically modified PbZrO$_3$ perovskite antiferroelectrics using advanced transmission electron microscopy techniques. The Pb-cation displacements, previously assumed to arrange in a fully-compensated antiparallel fashion, are found to be either antiparallel but with different magnitudes, or in a nearly orthogonal arrangement in adjacent stripes in the ICMs. Ab initio calculations corroborate the low-energy state of these arrangements. Our discovery corrects the atomic understanding of ICMs in PbZrO$_3$-based perovs…
Using an extension of a first-principles method developed by King-Smith and Vanderbilt [Phys. Rev. B {\bf 49}, 5828 (1994)], we investigate the effects of in-plane epitaxial strain on the ground-state structure and polarization of eight perovskite oxides: BaTiO$_3$, SrTiO$_3$, CaTiO$_3$, KNbO$_3$, NaNbO$_3$, PbTiO$_3$, PbZrO$_3$, and BaZrO$_3$. In addition, we investigate the effects of a nonzero normal stress. The results are shown to be useful in predicting the structure and polarization of perovskite oxide thin films and superlattices.
Ab initio calculations are utilized as an input to develop a simple model of polarization in epitaxial short-period CaTiO3/SrTiO3/BaTiO3 superlattices grown on a SrTiO3 substrate. The model is then combined with a genetic algorithm technique to optimize the arrangement of individual CaTiO3, SrTiO3 and BaTiO3 layers in a superlattice, predicting structures with the highest possible polarization and a low in-plane lattice constant mismatch with the substrate. This modelling procedure can be applied to a wide range of layered perovskite-oxide nanostructures providing guidance for experimental dev…
Exchange bias is usually rationalized invoking spin pinning effects caused by uncompensated antiferromagnetic interfaces. However, for compensated antiferromagnets other extrinsic factors, such as interface roughness or spin canting, have to be considered to produce a small uncompensation. As an alternative, here we propose two (related) possible mechanisms, driven by the intrinsic Dzyaloshinskii-Moriya interaction and ferroelectric polarization, for the explanation of exchange bias effects in perovskites with compensated G-type antiferromagnetism. One of the mechanisms is only active when a m…
In this paper, an efficient computational material design approach (cluster expansion) is employed for the ferroelectric $PbTiO_3$/$SrTiO_3$ system. Via exploring a conguration space including over $3 \times 10^6$ candidates, two special cation ordered configurations: either perfect or mixed 1/1 (101) superlattice, are identified with the mostly enhanced ferroelectric polarization by up to about 100% in comparison with the (001) superlattice. Analyzing these two special configurations reveals the exotic couplings between the antiferrodistortive distortion (AFD) and ferroelectric polarization (…
A key property that drives research in ferroelectric perovskite oxides is their strong piezoelectric response in which an electric field is induced by an applied strain, and vice-versa for the converse piezoelectric effect. We have achieved an experimental enhancement of the piezoelectric response and dielectric tunability in artificially layered epitaxial PbTiO$_{3}$/CaTiO$_{3}$ superlattices through an engineered rotation of the polarization direction. As the relative layer thicknesses within the superlattice were changed from sample to sample we found evidence for polarization rotation in m…
We have fabricated PbTiO$_{3}$/SrRuO$_{3}$ superlattices with ultra-thin SrRuO$_{3}$ layers. Due to the superlattice geometry, the samples show a large anisotropy in their electrical resistivity, which can be controlled by changing the thickness of the PbTiO$_{3}$ layers. Therefore, along the ferroelectric direction, SrRuO$_{3}$ layers can act as dielectric, rather than metallic, elements. We show that, by reducing the concentration of PbTiO$_{3}$, an increasingly important effect of polarization asymmetry due to compositional inversion symmetry breaking occurs. The results are significant as …
In the first-principles bulk-layer model the superlattice structure and polarization are determined by first-principles computation of the bulk responses of the constituents to the electrical and mechanical boundary conditions in an insulating superlattice. In this work the model is extended to predict functional properties, specifically dielectric permittivity and piezoelectric response. A detailed comparison between the bulk-layer model and full first-principles calculations for three sets of perovskite oxide superlattices, PbTiO$_3$/BaTiO$_3$, BaTiO$_3$/SrTiO$_3$ and PbTiO$_3$/SrTiO$_3$, is…
The effect of layer-by-layer heterostructuring and epitaxial strain on lattice instabilities and related ferroelectric properties is investigated from first principles for the [001]-(PbTiO$_3$)$_1$(PbZrO$_3$)$_1$ superlattice and pure PbTiO$_3$ on a cubic substrate. The results for the superlattice show an enhancement of the stability of the monoclinic r-phase with respect to pure PbTiO$_3$. Analysis of the lattice instabilities of the relaxed centrosymmetric reference structure computed within density functional perturbation theory suggests that this results from the presence of two unstable …
Epitaxial interfaces and superlattices comprised of polar and non-polar perovskite oxides have generated considerable interest because they possess a range of desirable properties for functional devices. In this work, emergent polarization in superlattices of SrTiO$_3$ (STO) and LaCrO$_3$ (LCO) is demonstrated. By controlling the interfaces between polar LCO and non-polar STO, polarization is induced throughout the STO layers of the superlattice. Using x-ray absorption near-edge spectroscopy and aberration-corrected scanning transmission electron microscopy displacements of the Ti cations off-…
We report on the fabrication of all perovskite Mott insulator/band insulator YTiO3/CaTiO3 superlattices by pulsed laser deposition. The combination of in situ reflection high energy electron diffraction, X-ray diffraction, and X-ray reflectivity confirms the high quality of the films grown in a layer-by-layer mode. Electrical transport measurements reveal that a non-SrTiO3 based two dimensional electron gas system has formed at the YTiO3/CaTiO3 interface. These studies offer another route in the pursuit of complex oxide two-dimensional electron gas systems, which allows to obtain greater insig…
We perform density functional theory plus dynamical mean field theory calculations to investi- gate internal charge transfer in an artificial superlattice composed of alternating layers of vanadate and manganite perovskite and Ruddlesden-Popper structure materials. We show that the elec- tronegativity difference between vanadium and manganese causes moderate charge transfer from VO2 to MnO2 layers in both perovskite and Ruddlesden-Popper based superlattices, leading to hole doping of the VO2 layer and electron doping of the MnO2 layer. Comparison of the perovskite and Ruddlesden-Popper based h…
Atomic-scale precision epitaxy of perovskite oxide superlattices provides unique opportunities for controlling the correlated electronic structures, activating effective control knobs for intriguing functionalities including electromagnetic, thermoelectric, and electrocatalytic behaviors. In this study, we investigated the close interplay between the atomic and electronic structures of correlated superlattices synthesized by atomic-scale precision epitaxy. In particular, we employ superlattices composed of correlated magnetic SrRuO3 (SRO) and quantum paraelectric SrTiO3 (STO) layers. In those …
Based on the theoretical exploration of electronic structures, we propose that the ordered double perovskites LaAVRuO$_6$ and LaVO$_3$/ARuO$_3$ (001) superlattice (A = Ca, Sr and Ba) are strong candidates for half-metallic (HM) antiferromagnets (AFMs). %LaAVRuO$_6$ and LaVO$_3$/ARuO$_3$ have the %100% spin polarizations at the Fermi level but with zero %total magnetic moments. We have shown that the HM-AFM nature in LaAVRuO$_6$ is very robust regardless of (i) divalent ion replacement at A-sites, (ii) oxygen site relaxation, (iii) the inclusion of the Coulomb correlation, and (iv) cation disor…
The structure and interface characteristics of (LaVO3)6m(SrVO3)m superlattices deposited on (100)-SrTiO3 (STO) substrate were studied using Transmission Electron Microscopy (TEM). Cross-section TEM studies revealed that both LaVO3 (LVO) and SrVO3 (SVO) layers are good single crystal quality and epitaxially grown with respect to the substrate. It is evidenced that LVO layers are made of two orientational variants of a distorted perovskite compatible with bulk LaVO3 while SVO layers suffers from a tetragonal distortion due to the substrate induced stain. Electron Energy Loss Spectroscopy (EELS) …
Perovskite bilayers with (111)-orientation combine a honeycomb lattice as a key feature with the strongly correlated, multiorbital nature of electrons in transition metal oxides. In a systematic DFT+$U$ study of (111)-oriented (La$X$O$_3$)$_2$/(LaAlO$_3$)$_4$ superlattices, we establish trends in the evolution of ground states versus band filling in (111)-oriented (La$X$O$_3$)$_2$/(LaAlO$_3$)$_4$ superlattices, with $X$ spanning the entire $3d$ transition metal series. The competition between local quasi-cubic and global triangular symmetry triggers unanticipated broken symmetry phases, with m…
We employed first-principles density functional theory calculations guided by group-theoretical analysis and demonstrated the control of insulator-metal-insulator transition, polarization and two sublattice magnetization in (LaFeO$_3$)$_1$/(CaFeO$_3$)$_1$ superlattice via. multi structural mode coupling i.e., 'multimode coupling'. We have discovered a polar A-type charge disproportionation mode, Q$_{ACD}$ (analogous to the A-type antiferromagnetic ordering), and found that it couples with the trilinear coupling, $Q_{Tri}$ mode (common in $Pnma$ perovskite oxides and involves three structural m…
A double-layered perovskite oxide Sr$_3$Mo$_2$O$_7$ is considered a "hidden ladder" system with wide and narrow bands near the Fermi level, for which high-$T_{\rm c}$ superconductivity is expected. However, the difficulty in synthesis, especially in the preparation of samples without oxygen deficiency, can hinder the observation of superconductivity. In this study, we constructed a double-layer SrMoO$_3$ block through artificial superlattices with the insulating SrTiO$_3$ block, (SrMoO$_3$)$_m$/(SrTiO$_3$)$_t$ ($m = 2, 4$; $t = 4$). First-principles calculations for bilayered SrMoO$_3$ ($m = 2…
The unequal electronic occupation of localized orbitals (orbital polarization), and associated lowering of symmetry and degeneracy, play an important role in the properties of transition metal oxides. Here, we examine systematically the underlying origin of orbital polarization, taking as exemplar the 3$d$ manifold of Co$^{2+}$ in a variety of spin, orbital and structural phases in the double perovskite La$_2$CoTiO$_6$ and the (001) superlattice (LaCoO$_3$)$_1$+(LaTiO$_3$)$_1$ systems. Superlattices are of specific interest due to the large experimentally observed orbital polarization of their…
