We have performed a first-principles study on the deformation effect of the electronic structures of graphite nanoribbon arrays with zigzag edges on both sides, and the edge atoms are terminated with hydrogen atoms. A uniaxial strain is considered to have deformation effect on the graphite nanoribbons. We found that the antiferromagnetic arrangement of the spin polarizing edges of graphite nanoribbon is still more favorable than that with the ferromagnetic arrangement under deformation. We also learned that a tensile strain increases the magnetization of the graphite ribbon while a compressive strain decreases it. A positive pressure derivative of the band gap of antiferromagnetic state is observed for the graphite nanoribbon under uniaxial strains. The strain changes the shape of band structure and the band gap; in here, the edge atoms play a crucial role. The deformations are also found to influence the contribution of the edge atoms to the bands near the Fermi level. The deformation effect for the graphite nanoribbon under transverse electric field is also studied.
We study numerically the adsorption of a mixture of CO$_2$ and CH$_4$ on a graphite substrate covered by graphene nanoribbons (NRs). The NRs are flat and parallel to the graphite surface, at a variable distance ranging from 6 Å to 14 Å. We show that the NRs-graphite substrate acts as an effective filter for CO$_2$. Our study is based on Molecular Dynamics (MD) simulations. Methane is considered a spherical molecule, and carbon dioxide is represented as a linear rigid body. Graphite is modeled as a continuous material, while the NRs are approached atomistically. We observe that when the NRs are…
A simple one-stage solution-based method was developed to produce graphene nanoribbons by sonicating graphite powder in organic solutions with polymer surfactant. The graphene nanoribbons were deposited on silicon substrate, and characterized by Raman spectroscopy and atomic force microscopy. Single-layer and few-layer graphene nanoribbons with a width ranging from sub-10 nm to tens of nm and length ranging from hundreds of nm to 1 μm were routinely observed. Electrical transport properties of individual graphene nanoribbons were measured in both the back-gate and polymer-electrolyte top-gate …
In this Letter, we investigate the strain-induced band-gap modulation of both armchair and zigzag graphane nanoribbons based on the first-principles calculations. Within the elastic range, the band gap changes linearly with the uniaxial strain, where the band-gap of graphane nanoribbonsis more sensitive to compressive than tensile deformation. The band-gap deformation mainly originates from the shift of valence band edge of graphane nanoribbons under stain. Our results imply the great potential of graphane nanoribbons in the pressure sensor and optical electronics applications.
We investigate the functionalization of functional groups to graphene nanoribbons with zigzag and armchair edges using first principles calculations. We find that the formation energy for the configuration of the functional groups functionalized to the zigzag edge is ~0.2 eV per functional group lower than that to the armchair edge. The formation energy difference arises from a structural deformation on the armchair edge by the functionalization whereas there is no structural deformation on the zigzag edge. Selective functionalization on the zigzag edge takes place at a condition of the temper…
Formation of clusters of interlayer interstitial carbon atoms in graphite is studied by means of molecular dynamics simulation. It is shown that the deformation potential is attractive for interstitials located in one interlayer region and repulsive for interstitials located in different interlayer regions. As a result, relatively small interstitial clusters are formed which are arranged in a checkerboard-like order.
This study of elastic and plastic deformation of graphene, silicene, and boron nitride (BN) honeycomb nanoribbons under uniaxial tension determines their elastic constants and reveals interesting features. In the course of stretching in the elastic range, the electronic and magnetic properties can be strongly modified. In particular, it is shown that the band gap of a specific armchair nanoribbon is closed under strain and highest valance and lowest conduction bands are linearized. This way, the massless Dirac fermion behavior can be attained even in a semiconducting nanoribbon. Under plastic …
Tuning the Electronic Structure of Graphene by Controlling Spatial Confinement
Center for Advanced Systems Understanding (CASUS)（高级系统理解中心）；Helmholtz Zentrum Dresden-Rossendorf（德累斯顿-罗斯多夫亥姆霍兹中心）；Institute of Artificial Intelligence, Technische Universität Dresden（德累斯顿工业大学人工智能研究所）
Change of the bonding environment at the free edges of graphene monolayer leads to excess edge energy and edge force, depending on the edge morphology (zigzag or armchair). By using a reactive empirical bond-order potential and atomistic simulations, we show that the excess edge energy in free-standing graphene nanoribbons can be partially relaxed by both in-plane and out-of-plane deformation. The excess edge energy and edge force are calculated for graphene nanoribbons with parallel zigzag or armchair edges. Depending on the longitudinal constraint, the compressive edge force leads to either …
Seven types of armchair graphyne nanoribbons are investigated with HSE06 functional. The quantum confinements in the graphyne nanoribbons open or increase the band gaps of the corresponding two-dimensional graphynes, which is crucial to high on/off ratio in electronic device operation. The major carrier mobilities of the graphyne nanoribbons with high percentage of sp hybridized carbon atoms are very large. The sparse linking pattern results in small number of frontier crystal orbitals and small deformation potential constants, which are responsible for the large carrier mobilities. Some graph…
Graphene nanoribbons present diverse electronic properties ranging from semiconducting to half-metallic, depending on their geometry, dimensions and chemical composition. Here we present a route to control these properties via externally applied mechanical deformations. Using state-of-the-art density functional theory calculations combined with classical elasticity theory considerations, we find a remarkable Young's modulus value of ~7 TPa for ultra-narrow graphene strips and a pronounced electromechanical response towards bending and torsional deformations. Given the current advances in the s…
We investigate the deformation and failure mechanisms of phosphorene sheet and nanoribbons under uniaxial tensile strain along the zigzag direction using the density functional tight-binding method. Surprisingly, twin-like deformation occurs homogenously across the phosphorene sheet, which significantly increases its failure strain. Vacancies within the sheet lead to the heterogeneous nucleation of twins at a lower critical strain which, subsequently, propagate across the entire sheet. Twin-like deformation always occurs heterogeneously in phosphorene nanoribbons (with or without vacancies). P…
Cooperative adsorption and diffusion trapping induced by AlF3 intercalation in graphite
Instituto de Física del Litoral (IFIS-Litoral, CONICET–UNL)（里奥托尔物理研究所）；Centro Atómico Bariloche, Comisión Nacional de Energía Atómica (CNEA)（巴里洛切原子中心，国家原子能委员会）；Departamento de Física, Facultad de Ingeniería Química, Universidad Nacional del Litoral（国立里奥托尔大学化工学院物理系）；Institute of Environmental Technology (IET), CEET, VSB – Technical University of Ostrava（俄斯特拉发理工大学CEET环境技术研究所）
We demonstrate the preparation of both armchair and zigzag epitaxial graphene nanoribbons (GNRs) on 4H-SiC using a polymer-assisted, sublimation growth method. Historically, the preparation of GNRs depended on the quality, or smoothness, of the surface changes during growth. The physical phenomenon of terrace step formation introduces the risk of GNR deformation along sidewalls, but the risk is heavily mitigated by this polymer-assisted sublimation method. Two widths (100 nm and 50 nm) are examined electrically and optically for both armchair and zigzag GNRs. Our electrical results support the…
Electronic states in boron-nitride and boron-carbon-nitride nanoribbons with zigzag edges are studied using the extended Hubbard model with nearest neighbor Coulomb interactions. The charge and spin polarized states are considered, and the phase diagram between two states is obtained. Next, the electric capacitance is calculated in order to examine the nano-functionalities of the system. Due to the presence of the strong site energies, the charge polarized state overcomes the spin polarized states, giving the large difference of the phase diagram in comparison with that of graphite system. The…
We study analytically, based on the tight-binding model, the electronic band structure of armchair AA-stacked bilayer graphene nanoribbons (BLGNRs) in several regimes. We apply hard-wall boundary conditions to determine the discretion dominating on the Bloch wavefunctions in the confined direction. First we consider an ideal case, perfect nanoribbons without any edge deformation, and show that their electronic properties are strongly size-dependent. We find that the narrow armchair AA-stacked BLGNRs (similar to single-layer graphene nanoribbons) may be metallic or semiconducting depending on t…
Dislocations are a central concept in materials science, which dictate the plastic deformation and damage evolution in materials. Layered materials such as graphite admit two general types of interlayer dislocations: basal and prismatic dislocations, of which prismatic dislocations have been relatively less studied. Using density functional theory (DFT) calculations, we have examined different prismatic core structures in graphite and evaluated their structure, energetics and mobility. We find close energetic interplay between bonded and "free-standing" core structures in both zigzag and armch…
Armchair silicene nanoribbons with width of 9-39 silicon atoms are investigated by using self-consistent field crystal orbital method based on density functional theory. The carrier mobilities obtained from deformation potential theory oscillate with respect to the width and the values are a fraction of what the graphene nanoribbons have. The buckled structure, hydrogen saturation, edge reconstruction as well as edge roughness decrease the carrier mobilities which are explained with the aid of crystal orbitals.
Advancement of nanotechnology has greatly accelerated the miniaturization of mechanical or electronic devices. This work proposes a new nanoscale spring - a graphene nanoribbon-based helicoid (GH) structure by using large-scale molecular dynamics simulation. It is found that the GH structure not only possesses an extraordinary high tensile deformation capability, but also exhibits unique features not accessible from traditional springs. Specifically, its yield strain increases when its inner radius is enlarged, which can exceed 1000%, and it has three elastic deformation stages including the i…
The conductance through a quantum point contact created by a sharp and hard metal tip on the graphite surface has features which to our knowledge have not been encountered so far in metal contacts or in nanowires. In this paper we first investigate these features which emerge from the strongly directional bonding and electronic structure of graphite, and provide a theoretical understanding for the electronic conduction through quantum point contacts. Our study involves the molecular-dynamics simulations to reveal the variation of interlayer distances and atomic structure at the proximity of th…
Electrons in isolated graphene layers are a two-dimensional gas of massless Dirac Fermions. In realistic devices, however, the electronic properties are modified by elastic deformations, interlayer coupling and substrate interaction. Here we unravel the electronic structure of doped graphene, revisiting the stage one graphite intercalation compound KC$_8$ using angle--resolved photoemission spectroscopy and ab--initio calculations. The full experimental dispersion is in excellent agreement to calculations of doped graphene once electron correlations are included on the $GW$ level. This highlig…
We present the analytical solution of the wavefunction and energy dispersion of armchair graphene nanoribbons (GNRs) based on the tight-binding approximation. By imposing hard-wall boundary condition, we find that the wavevector in the confined direction is discretized. This discrete wavevector serves as the index of different subbands. Our analytical solutions of wavefunction and associated energy dispersion reproduce the numerical tight-binding results and the solutions based on the k*p approximation. In addition, we also find that all armchair GNRs with edge deformation have energy gaps, wh…
Density functional study of strain effects on the electronic band structure and transport prop- erties of the graphene nanoribbons (GNR) is presented. We apply a uniaxial strain in the x (nearest-neighbor) and y (second nearest-neighbor) directions, related to the deformation of zigzag and armchair edge GNRs (AGNR and ZGNR), respectively. We calculate the quantum conduc- tance and band structures of the GNR using the Wannier function in a strain range from -8% to +8% (minus and plus signs show compression and tensile strain). As strain increases, depending on the AGNR family type, the electric…
We report that mechanical deformation of graphite with cavity shock waves introduces a new group of charge carriers, with both effective mass and native concentration one order of magnitude above those found in the pristine material. Their nature, however, remains quasi-2D. Our results show that defects introduced during mechanical exfoliation have the potential to unlock oscillatory behavior above 50 T in graphite, thus providing a new probe for field-induced electronic phase transitions in the material.
Electric field enhances the electronic and diffusion properties of penta-graphene nanoribbons for application in lithium-ion batteries: a first-principles study
A few-layer black phosphorene has recently gained significant interest in the scientific community. In this paper, we consider several polymorphs of phosphorene nanoribbons (PNRs) and employ deformation potential theory within the effective mass approximation together with density functional theory to investigate their structural, mechanical and electronic properties. The results show that stability of PNRs strongly depends on the direction along which they can be cut from 2D counterpart. PNRs also exhibit a wide range of line stiffness ranging from 6x10^10 eV/m to 18x10^11 eV/m which has litt…
The thermoelectric properties of MoS2 armchair nanoribbons with different width are studied by using first-principles calculations and Boltzmann transport theory, where the relaxation time is predicted from deformation potential theory. Due to the dangling bonds at the armchair edge, there is obvious structure reconstruction of the nanoribbons which plays an important role in governing the electronic and transport properties. The investigated armchair nanoribbons are found to be semiconducting with indirect gaps, which exhibit interesting width-dependent oscillation behavior. The smaller gap o…
Atomistic simulations were utilized to develop fundamental insights regarding the elongation process starting from ultranarrow graphene nanoribbons (GNRs) and resulting in monatomic carbon chains (MACCs). There are three key findings. First, we demonstrate that complete, elongated, and stable MACCs with fracture strains exceeding 100% can be formed from both ultranarrow armchair and zigzag GNRs. Second, we demonstrate that the deformation processes leading to the MACCs have strong chirality dependence. Specifically, armchair GNRs first form DNA-like chains, then develop into monatomic chains b…
Graphene nanoribbons (GNRs) with widths of a few nanometres are promising candidates for future nano-electronic applications due to their structurally tunable bandgaps, ultrahigh carrier mobilities, and exceptional stability. However, the direct growth of micrometre-long GNRs on insulating substrates, which is essential for the fabrication of nano-electronic devices, remains an immense challenge. Here, we report the epitaxial growth of GNRs on an insulating hexagonal boron nitride (h-BN) substrate through nanoparticle-catalysed chemical vapor deposition (CVD). Ultra-narrow GNRs with lengths of…
The buckling of graphene nano-ribbons containing a grain boundary is studied using atomistic simulations where free and supported boundary conditions are invoked. We found that when graphene contains a small angle grain boundary the buckling strains are larger when the ribbons with free (supported) boundary condition are subjected to compressive tension parallel (perpendicular) to the grain boundary. The shape of the deformations of the buckled graphene nanoribbons depends on the boundary conditions and the presence of the grain boundary and the direction of applied in-plane compressive tensio…
We present our study on atomic, electronic, magnetic and phonon properties of one dimensional honeycomb structure of molybdenum disulfide (MoS$_2$) using first-principles plane wave method. Calculated phonon frequencies of bare armchair nanoribbon reveal the fourth acoustic branch and indicate the stability. Force constant and in-plane stiffness calculated in the harmonic elastic deformation range signify that the MoS$_2$ nanoribbons are stiff quasi one dimensional structures, but not as strong as graphene and BN nanoribbons. Bare MoS$_2$ armchair nanoribbons are nonmagnetic, direct band gap s…
We studied, by scanning tunneling microscopy, the morphology of nanopits of monolayer depth created at graphite surfaces by hydrogen plasma etching under various conditions such as H$_2$ pressure, temperature, etching time, and RF power of the plasma generation. In addition to the known pressure-induced transition of the nanopit morphology, we found a sharp temperature-induced transition from many small rather round nanopits of ~150 nm size to few large hexagonal ones of 300-600 nm within a narrow temperature range. The remote and direct plasma modes switching mechanism, which was proposed to …
We use the tip of the scanning tunneling microscope (STM) to manipulate single weakly bound nanometer-sized sheets on the the highly oriented pyrolytic graphite (HOPG) surface through artifically increasing the tip and sample interaction in humid environment. By this means it is possible to tear apart a graphite sheet againt a step and fold this part onto the HOPG surface and thus generate the gaphene superlattices with hexagonal symmetry. The tip and sample surface interactions, including the van der Waals force, eletrostatic force and capillary attraction force originating from the Laplace p…
Herein, we investigate the structural, electronic and mechanical properties of zigzag graphene nanoribbons upon the presence of stress applying Density Functional Theory within the GGA-PBE approximation. The uniaxial stress is applied along the periodic direction, allowing a unitary deformation in the range of +/- 0.02%. The mechanical properties show a linear-response within that range while the non-linear dependence is found for higher strain. The most relevant results indicate that Young's modulus is considerable higher than those determined for graphene and carbon nanotubes. The geometrica…
Dirac semimetal is an ideal parent state to realize various exotic states of matters, such as quantum spin Hall state, Weyl semimetal phase and Majorana zero modes. Topological phase transition allows for the switching between these different topological states. Here, in this paper, we exhibit experimentally an effective approach of inducing topological phase transition in Cd3As2 nanoribbons, by applying a bending strain profile onto the sample. The local strain varies linearly from compression to tension through the cross-section of a bent nanoribbon. The strain gradient causes obvious lattic…
Atomic modulations of two-dimensional materials using scanning tunneling microscope (STM) tip-induced forces modifies their mechanical and electrical properties. In situ topographic and spectroscopic probing through electrical tunneling has been used for straining sheets of graphite, monolayer graphene and NbSe2. The findings also resolve a thirty-five-year-old controversy involving numerous proposed models to explain the source of anomalously high measured atomic amplitudes (of up to 24 Angstroms, expected 0.2 Angstroms) from atomic corrugation on graphite surfaces. Our findings attributes th…
The effects of tensile strain on the current-voltage (I-V) characteristics of hydrogenated-edge armchair graphene nanoribbons (HAGNRs) are investigated by using DFT theory. The strain is introduced in two different ways related to the two types of systems studied in this work: in-plane strained systems (A), and out-of-plane strained systems due to bending (B). These two kinds of strain lead to make a distinction among three cases: in-plane strained systems with strained electrodes (A1) and with unstrained electrodes (A2), and out-of-plane homogeneously strained systems with unstrained, fixed e…
In this work, the strain modulation of electronic structure and magnetic interaction in monolayer nanoribbons of B$_2$S, a recently realized monolayer system, is investigated. In the first part of our study, we focus on how the electronic structure of monolayer nanoribbons of B$_2$S is modified under uniaxial strains, then employing a tight-binding framework together with the conventional theory of elasticity, we discuss how strain-induced local deformations can be used as a means to affect Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction in zigzag nanoribbons of B$_2$S. We show that breaking …
Strained graphene with lattice deformations has been demonstrated to give rise to large pseudomagnetic fields and host many exotic properties. Here, we propose a non-magnetic approach to realize a momentum-dependent out-of-plane spin splitting in strained graphene nanoribbons with a moderate spin-orbit coupling. This unique spin splitting distincts from the well-known Zeeman-type spin splitting and the Rashba-type spin splitting. Our analysis indicates that the competition between quantum spin Hall edge states and valley edge states in the nanoribbon leads to the unique spin splitting. The qua…
Phosphorene, a honeycomb structure of black phosphorus, was isolated recently. We investigate electric properties of phosphorene nanoribbons based on the tight-binding model. A prominent feature is the presence of quasi-flat edge bands entirely detached from the bulk band. We explore the mechanism of the emergence of the quasi-flat bands analytically and numerically from the flat bands well known in graphene by a continuous deformation of a honeycomb lattice. The quasi-flat bands can be controlled by applying in-plane electric field perpendicular to the ribbon direction. The conductance is swi…
Recently, two-dimensional nanostructures consisting of alternating graphene and boron nitride (BN) domains have been synthesized. These systems possess interesting electronic and mechanical properties, with potential applications in electronics and optical devices. Here, we perform a first-principles investigation of models of BN-C hybrid monolayers and nanoribbons deposited on the Cu(111) surface, a substrate used for their growth in said experiments. For the sake of comparison, we also consider BN and BC2N nanostructures. We show that BN and BC2N monolayers bind weakly to Cu(111), whereas mo…
Graphite is an example of a layered material that can be bent to form fullerenes which promise important applications in electronic nanodevices. The spheroidal geometry of a slightly elliptically deformed sphere was used as a possible approach to fullerenes. We assumed that for a small deformation the eccentricity of the spheroid is much more smaller then one. We are interested in the elliptically deformed fullerenes C70 as well as in C60 and its spherical generalizations like big C240 and C540 molecules. In the next study the expanded field-theory model was proposed to study the electronic st…
The Hydrogen and Fluorine planar armchairs graphene nanoribbons (H and F AGNRs), subjected to twist deformation within fixed periodic boundary conditions, eventually morph to a helical conformations are investigated at few tractable points. Unlike structural properties, no effect of symmetries on mechanical properties is observed, though passivation does have a significant effect on mechanical as well as on electrical properties. Hookes law for severely twisted AGNRs indicates the high elasticity of H-AGNRs whereas the F-AGNRs shows plasticity after threshold torsional strain. Torsional stress…
The control of optically driven high-frequency strain waves in nanostructured systems is an essential ingredient for the further development of nanophononics. However, broadly applicable experimental means to quantitatively map such structural distortion on their intrinsic ultrafast time and nanometer length scales are still lacking. Here, we introduce ultrafast convergent beam electron diffraction (U-CBED) with a nanoscale probe beam for the quantitative retrieval of the time-dependent local distortion tensor. We demonstrate its capabilities by investigating the ultrafast acoustic deformation…
We present a machine learning based model that can predict the electronic structure of quasi-one-dimensional materials while they are subjected to deformation modes such as torsion and extension/compression. The technique described here applies to important classes of materials such as nanotubes, nanoribbons, nanowires, miscellaneous chiral structures and nano-assemblies, for all of which, tuning the interplay of mechanical deformations and electronic fields is an active area of investigation in the literature. Our model incorporates global structural symmetries and atomic relaxation effects, …
