The origin of the very large piezoelectric response observed in the vicinity of the morphotropic phase boundary (MPB) in perovskite lead zirconate titanate and related systems has been under intensive studies. Polarization rotation ideas are frequently invoked to explain the piezoelectric properties. It was recently reported that lead titanate undergoes a phase transformation sequence $P4mm\to Pm\to Cm\to R\bar{3}c$ at 10 K as a function of hydrostatic pressure [M. Ahart et al. Nature Letters. \textbf{451}, 545 (2008)]. We demonstrate that this interpretation is not correct by (i) simulating the reported diffraction patterns, and (ii) by density-functional theory computations which show that neither the $Pm$, $Cm$ nor $Pmm2$ phase is stable in the studied pressure range, and further show that octahedral tilting is the key stabilization mechanism under high pressure. Notes on a more general ground are given to demonstrate that a continuous phase transition between rhombohedral and tetragonal phases via intermediate monoclinic phase is not possible. Thus, two-phase co-existence in the vicinity of the phase transition region is probable and has an important role for electromechanical properties.
The structural characteristics of the perovskite- based ferroelectric Pb(Zn1/3Nb2/3)O3-9%PbTiO3 at the morphotropic phase boundary (MPB) region (x≃0.09) have been analyzed. The analysis is based on the symmetry adapted free energy functions under the assumption that the total polarization and the unit cell volume are conserved during the transformations between various morphotropic phases. Overall features of the relationships between the observed lattice constants at various conditions have been consistently explained. The origin of the anomalous physical properties at MPB is discussed.
We used an optical reflection method to measure the temperature-dependence of the piezoelectricity, electrostriction and time constant of a morphotropic phase boundary (MPB) thin film. We obtained the piezoelectric constant and the electrostrictive constant as a function of temperature by curve fitting the experimental data. We also obtained the time constant as a function of temperature and applied voltage. An abnormal behavior of the strain that was larger at 275 K than at 285 K was observed. This observation was also consistent with the minimal hysteresis behavior of the time constant at 27…
We report on the discovery of a lead-free morphotropic phase boundary in Sm doped BiFeO3 with a simple perovskite structure using the combinatorial thin film strategy. The boundary is a rhombohedral to pseudo-orthorhombic structural transition which exhibits a ferroelectric (FE) to antiferroelectric (AFE) transition at approximately Bi0.86Sm0.14FeO3 with dielectric constant and out-of-plane piezoelectric coefficient comparable to those of epitaxial (001) oriented Pb(Zr,Ti)O3 (PZT) thin films at the MPB. The discovered composition may be a strong candidate of a Pb-free piezoelectric replacement…
The contributory mechanisms associated with high piezoelectric response in piezoelectric ceramics have been examined by in-situ electric field dependent high energy synchro x-ray diffraction study. A comparative study of electric field induced lattice strain and the propensity for non-180o domain switching on two closeby compositions of a high performance piezoelectric alloy (1-x)PbTiO3-(x)BiScO3, one within the morphotropic phase boundary (MPB) region exhibiting d33 of 425 pC/N and another just outside the MPB region exhibiting d33 of 260 pC/N, unravelled that, inspite of the MPB specimen exh…
Temperature dependent structural changes in a nearly pure monoclinic phase composition (x=0.525) of Pb(Zr_xTi_1-x)O_3 (PZT) have been investigated using Rietveld analysis of high-resolution synchrotron powder x-ray diffraction data and correlated with changes in the dielectric constant and planar electromechanical coupling coefficient. Our results show that the intrinsic piezoelectric response of the tetragonal phase of PZT is higher than that of the monoclinic phase. It is also shown that the high piezoelectric response of PZT may be linked with an anomalous softening of the elastic modulus (…
In this work, we address the issue of peaking of piezoelectric response at a particular composition in the morphotropic phase boundary (MPB) region of (Pb0.940Sr0.06)(ZrxTi1-x)O3 (PSZT) piezoelectric ceramics. We present results of synchrotron x-ray powder diffraction, dielectric, piezoelectric and sound velocity studies to critically examine the applicability of various models for the peaking of physical properties. It is shown that the models based on the concepts of phase coexistence, polarization rotation due to monoclinic structure, tricritical point and temperature dependent softening of…
The symmetry was examined using neutron diffraction method on Pb(Zn1/3Nb2/3)O3 -9%PbTiO3 (PZN/9PT) which has a composition at the morphotropic phase boundary (MPB) between Pb(Zn1/3Nb2/3)O3 and PbTiO3. The results were compared with those of other specimens with same composition but with different prehistory. The equilibrium state of all examined specimens is not the mixture of rhombohedral and tetragonal phases of the end members but exists in a new polarization rotation line Mc# (orthorhombic-monoclinic line). Among examined specimens, one exhibited tetragonal symmetry at room temperature but…
The effects of atomic short-range order on the properties of Pb(Zr_{1-x}Ti_x)O_3 alloy in its morphotropic phase boundary (MPB) are predicted by combining first-principles-based methods and annealing techniques. Clustering is found to lead to a compositional expansion of this boundary, while the association of unlike atoms yields a contraction of this region. Atomic short-range order can thus drastically affect properties of perovskite alloys in their MPB, by inducing phase transitions. Microscopic mechanisms responsible for these effects are revealed and discussed.
Temperature-dependent dielectric permittivity of lead-free (LixNa1-x)NbO3 for nominal x = 0.04-0.20, prepared by solid state reaction followed by sintering, was studied to resolve often debated issue pertaining to exactness of morphotropic phase boundary (MPB) location along with structural aspects and phase stability in the system near MPB. Interestingly, a diffuse phase transition has been observed in the dielectric permittivity peak arising from the disorder induced in A-site and structural frustration in the perovskite cell due to Li substitution. A partial phase diagram has been proposed …
Using data obtained from first-principles calculations, we show that the position of the morphotropic phase boundary (MPB) and transition temperature at MPB in ferroelectric perovskite solutions can be predicted with quantitative accuracy from the properties of the constituent cations. We find that the mole fraction of PbTiO$_3$ at MPB in Pb(B$'$B$''$)O$_3$-PbTiO$_3$, BiBO$_3$-PbTiO$_3$ and Bi(B$'$B$''$)O$_3$-PbTiO$_3$ exhibits a linear dependence on the ionic size (tolerance factor) and the ionic displacements of the B-cations as found by density functional theory calculations. This dependenc…
Evidences of a monoclinic phase in unpoled (PbMg1/3Nb2/3O3)1-x-(PbTiO3)x with x=0.35 (PMN-PT 35%) and unpoled (PbZn1/3Nb2/3O3)1-x-(PbTiO3)x with x=0.09 (PZN-PT 9%) are presented from a neutron Rietveld analysis. This monoclinic phase is different from the phase recently evidenced by Noheda and coworkers in PbZr1-xTixO3 with x=0.481 but is identical to the phase observed in poled PZN-PT with x=0.102 by the same authors. The structural resolutions allowed us to compare both structures and to deduce the direction and magnitude of polarization. In PMN-PT 35% and PZN-PT 9% this phase is characteris…
Ceramic solid solutions of PbZr(1-x)TixO3 (PZT) with compositions of about x= 0.50 are well-known for their extraordinarily large piezoelectric responses. The latter are highly anisotropic, and it was recently shown that, for the rhombohedral compositions (x< 0.5), the piezoelectric coefficients were largest away from the polar direction, contrary to common belief. Shortly afterwards a low-symmetry monoclinic phase was observed by synchrotron x-ray diffraction at around x=0.50. Similar behavior and features are also present in a number of related lead-based strongly-piezoelectric single crysta…
We find an unexpected tetragonal-to-monoclinic-to-rhombohedral-to-cubic phase transition sequence induced by pressure, and a morphotropic phase boundary in a pure compound using first-principles calculations. Huge dielectric and piezoelectric coupling constants occur in the transition regions, comparable to those observed in the new complex single-crystal solid-solution piezoelectrics such as Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_{3}$-PbTiO$_{3}$, which are expected to revolutionize electromechanical applications. Our results show that morphotropic phase boundaries and giant piezoelectric effects do not …
In piezoelectric ceramics the changes in the phase stabilities versus stress and temperature in the vicinity of the phase boundary play a central role. The present study was dedicated to the classical piezoelectric, lead-zirconate-titanate (PZT) ceramic with composition Pb(Zr$_{0.54}$Ti$_{0.46}$)O$_3$ at the Zr-rich side of the morphotropic phase boundary at which both intrinsic and extrinsic contributions to piezoelectricity are significant. The pressure-induced changes in this two-phase (rhombohedral $R3c$+monoclinic $Cm$ at room temperature and $R3c+P4mm$ above 1 GPa pressures) system were …
We report on the evolution of the magnetic structure of BiFeO3 thin films grown on SrTiO3 substrates as a function of Sm doping. We determined the magnetic structure using neutron diffraction. We found that as Sm increases, the magnetic structure evolves from a cycloid to a G-type antiferromagnet at the morphotropic phase boundary, where there is a large piezoelectric response due to an electric-field induced structural transition. The occurrence of the magnetic structural transition at the morphotropic phase boundary offers another route towards room temperature multiferroic devices.
We present an ab initio study of the BFCO solid solution formed by multiferroics BiFeO3 (BFO) and BiCoO3 (BCO). We find that BFCO presents a strongly discontinuous morphotropic transition between BFO-like and BCO-like ferroelectric phases. Further, for all compositions such phases remain (meta)stable and retain well-differentiated properties. Our results thus suggest that an electric field can be used to switch between these structures, and show that such a switching involves large phase-change effects of various types, including piezoelectric, electric, and magnetoelectric ones.
A first-principles-derived approach is used to study structural, piezoelectric and dielectric properties of Pb(Zr_{1-x}Ti_{x})O_{3} (PZT) solid solutions near the morphotropic phase boundary at low temperature. Three ferroelectric phases are found to exist: a tetragonal phase for larger x compositions, a rhombohedral phase for smaller x compositions, and the recently discovered monoclinic phase in between. In this monoclinic phase, the polarization associated with the Zr atoms behaves differently from the polarization associated with the Ti atoms. As the composition x decreases, the former rot…
We report the finding of unusual scale-dependent symmetry below the ferroelectric Curie temperature in the perovskite Pb(Zr1-xTix)O3 single crystals of morphotropic phase boundary compositions. The crystals of tetragonal symmetry (from x-ray diffraction experiments) on sub-micrometer scale exhibit a macroscopic (optically determined) cubic symmetry. This peculiar optical isotropy is explained by the anomalously small size of tetragonal ferroelectric domains. Upon further cooling the crystals transform to the phase consisting of micrometer-sized domains of monoclinic Cm symmetry.
Results presented in this article demonstrate importance of taking into account such a phenomenon as the solid solution decomposition at the boundaries separating coexisting phases in lead-zirconate-titanate-based solid solutions with compositions belonging to the morphotropic boundary region of the "temperature-composition" phase diagram. It is shown that in the local decomposition of solid solutions in the vicinity of the boundaries separating the tetragonal and rhombohedral phases in lead-zirconate-titanate-based solid solutions lead to the changes of the chemical composition of the solid s…
In this review we address some of the experimental challenges found in the x-ray diffraction characterization of the low-symmetry phases recently discovered in the PZT, PZN-PT and PMN-PT piezoelectric systems around their morphotropic phase boundaries. In particular, we discuss the need for special care in the preparation of powder samples made from single crystals in order to avoid degradation and peak-broadening effects.
A summary of the work recently carried out on the morphotropic phase boundary (MPB) of PZT is presented. By means of x-ray powder diffraction on ceramic samples of excellent quality, the MPB has been successfully characterized by changing temperature in a series of closely spaced compositions. As a result, an unexpected monoclinic phase has been found to exist in between the well-known tetragonal and rhombohedral PZT phases. A detailed structural analysis, together with the investigation of the field effect in this region of compositions, have led to an important advance in understanding the m…
High resolution x-ray powder diffraction measurements on poled PbZr(1-x)TixO3 (PZT) ceramic samples close to the rhombohedral-tetragonal phase boundary (the so-called morphotropic phase boundary, MPB) have shown that for both rhombohedral and tetragonal compositions, the piezoelectric elongation of the unit cell does not occur along the polar directions but along those directions associated with the monoclinic distortion. This work provides the first direct evidence for the origin of the very high piezoelectricity in PZT.
The question of the origin of the piezoelectric properties enhancement in perovskite ferroelectrics is approached by analyzing the Gibbs free energy of tetragonal BaTiO3, PbTiO3 and Pb(Zr,Ti)O3 in the framework of the Landau-Ginzburg-Devonshire theory. The flattening of the Gibbs free energy profile appears as a fundamental thermodynamic process behind the piezoelectric enhancement. The generality of the approach is demonstrated by examining the free energy flattening and piezoelectric enhancement as a function of composition, temperature, electric field and mechanical stress. It is shown that…
Piezoelectrics play a critical role in various applications. The permanent dipole associated with the molecular cations in organometal-halide perovskites (OMHPs) may lead to spontaneous polarization and thus piezoelectricity. Here, we explore the piezoelectric properties of OMHPs with density functional theory. We find that the piezoelectric coefficient depends sensitively on the molecular ordering, and that the experimentally observed light-enhanced piezoelectricity is due to to a non-polar to polar structural transition. By comparing OMHPs with different atomic substitutions in the $ABX_3$ a…
The stability of high-symmetry $P4mm$ polar phase in eleven ferroelectric perovskite superlattices with the polar discontinuity is studied from first principles. In most superlattices, this phase exhibits either the ferroelectric or the antiferrodistortive instability, or both of them. The structure of the ground state and, for a number of systems, also of metastable phases in these superlattices is found. The spontaneous polarization and piezoelectric properties of superlattices are calculated. The appearance of high piezoelectric coefficients (up to 150-270 pC/N) in some superlattices is ass…
High-temperature electronic materials are in constant demand as the required operational range for various industries increases. Here we design $(A,A^\prime)B_2$O$_6$ perovskite oxides with [111] ``rock salt" $A$-site cation order and predict them to be potential high-temperature piezoelectric materials. By selecting bulk perovskites which have a tendency towards only out-of-phase $B$O$_6$ rotations, we avoid possible staggered ferroelectric to paraelectric phase transitions while also retaining non-centrosymmetric crystal structures necessary for ferro- and piezoelectricity. Using density fun…
We screen a large chemical space of perovskite alloys for systems with the right properties to accommodate a morphotropic phase boundary (MPB) in their composition-temperature phase diagram, a crucial feature for high piezoelectric performance. We start from alloy end-points previously identified in a high-throughput computational search. An interpolation scheme is used to estimate the relative energies between different perovskite distortions for alloy compositions with a minimum of computational effort. Suggested alloys are further screened for thermodynamic stability. The screening identifi…
We observed that electric field induces phase transition from tetragonal to rhombohedral in polycrystalline morphotropic lead zirconate titanate (PZT) films, as reported in 2011 for bulk PZT. Moreover, we evidenced that this field-induced phase transition is strongly correlated with PZT film piezoelectric properties, that is to say the larger the phase transition, the larger the longitudinal piezoelectric coefficient d 33,eff . Although d 33,eff is already comprised between as 150 to 170 pm/V, our observation suggests that one could obtain larger d 33,eff values, namely 250 pm/V, by optimizing…
For the intrinsic carriers of MAPbBr$_{3}$, the temperature $T$ dependent mobility $μ(T)$ of behaves like $μ\propto T^{-1/2}$ in piezoelectric tetragonal phase, $μ\propto T^{-1.4}$ in non-piezoelectric cubic phase. But for the photo-generated carriers in other halide perovskites ABX$_{3}$, $μ\propto T^{-3/2}$ behavior is typical. Due to the strong interaction of carrier with longitudinal optical phonon, in ABX$_{3}$ the carriers mainly exist as optical polarons. The softness of ABX$_{3}$ renders it without inversion center in tetragonal phase, which allows piezoelectric effect at low carrier c…
Two-dimensional polarity is intriguing but remains in the early stage. Here a structural evolution diagram is established for GeS monolayer, which leads a noncollinear ferrielectric $δ$-phase energetically as stable as the ferroelectric $α$-phase. Its ferrielectricity is induced by the phonon frustration, i.e., the competition between ferroelectric and antiferroelectric modes, providing more routes to tune its polarity. Besides its prominent properties like large band gap, large polarization, and high Curie temperature, more interestingly, the morphotropic phase boundary between $α$- and $δ$-p…
Strong piezoelectricity in the perovskite-type PbZr(1-x)TixO3 (PZT) and Pb(Zn1/3Nb2/3)O3-PbTiO3 (PZN-PT) systems is generally associated with the existence of a morphotropic phase boundary (MPB) separating regions with rhombohedral and tetragonal symmetry. An x-ray study of PZN-9%PT has revealed the presence of a new orthorhombic phase at the MPB, and a near-vertical boundary between the rhombohedral and orthorhombic phases, similar to that found for PZT between the rhombohedral and monoclinic phases. We discuss the results in the light of a recent theoretical paper by Vanderbilt and Cohen, wh…
Morphotropic phase boundaries (MPBs) show substantial piezoelectric and dielectric responses, which have practical applications. The predicted existence of MPB in HfO2-ZrO2 solid solution thin film has provided a new way to increase the dielectric properties of a silicon-compatible device. Here, we present a new fabrication design by which the density of MPB and consequently the dielectric constant of HfO2-ZrO2 thin film was considerably increased. The density of MPB was controlled by fabrication of a 10-nm [1 nm-Hf0.5Zr0.5O2 (Ferroelectric)/1 nm-ZrO2 (Antiferroelectric)] nanolaminate followed…
Interfacial effect on the optoelectronic and piezoelectric properties of Ge-Sn terminated Halide Perovskite heterostructure from first-principles study
A monoclinic phase was recently discovered near the morphotropic phase boundary in several high-performance piezoelectric perovskite solid solutions, but its properties have not been reported. In this paper the dielectric, piezo- and ferroelectric properties of the monoclinic Pm phase in the (1-x)Pb(Mg1/3Nb2/3)O3 -xPbTiO3 perovskite system are studied. In a (001)-oriented crystal of composition x=0.33, ferroelectric hysteresis loops with remanent polarization of 23 uC/cm^2 are displayed. In poled monoclinic crystals, under unipolar drive up to 10 kV/cm, the domain walls remain unchanged, the p…
Recently discovered fine structure of the morphotropic phase boundaries in highly piezoelectric mixture compounds PZT, PMN-PT, and PZN-PT demonstrates the importance of highly non-linear interactions in these systems. We show that an adequate Landau-type description of the ferroelectric phase transitions in these compounds is achieved by the use of a twelfth-order expansion of the Landau potential in terms of the phenomenological order parameter. Group-theoretical and catastrophe-theory methods are used in constructing the appropriate Landau potential. A complete phase diagram is calculated in…
We present an approach to the implementation of the virtual crystal approximation (VCA) for the study of properties of solid solutions in the context of density-functional methods. Our approach can easily be applied to any type of pseudopotential, and also has the advantage that it can be used to obtain estimates of the atomic forces that would arise if the real atoms were present, thus giving insight into the expected displacements in the real alloy. We have applied this VCA technique within the Vanderbilt ultrasoft-pseudopotential scheme to predict dielectric and piezoelectric properties of …
For decades it has been a well-known fact that among the few ferroelectric compounds in the perovskite family namely BaTiO3, KNbO3, PbTiO3 Na1/2Bi1/2TiO3 the dielectric and piezoelectric properties of BaTiO3 is considerably higher than the others in polycrystalline form at room temperature. Further, similar to ferroelectric alloys exhibiting morphotropic phase boundary, single crystals of BaTiO3 exhibits anomalously large piezoelectric response when poled away from the direction of spontaneous polarization at room temperature. These anomalous features in BaTiO3 remained unexplained so far from…
The complex elastic compliance and dielectric susceptibility of (Na_{0.5}Bi_{0.5})_{1-x}Ba_{x}TiO_{3} (NBT-BT) have been measured in the composition range between pure NBT and the morphotropic phase boundary included, 0 <= x <= 0.08. The compliance of NBT presents sharp peaks at the rhombohedral/tetragonal and tetragonal/cubic transitions, allowing the determination of the tetragonal region of the phase diagram, up to now impossible due to the strong lattice disorder and small distortions and polarizations involved. In spite of ample evidence of disorder and structural heterogeneity, the R-T t…
We identify a first-order, isosymmetric transition between a ferrielectric (FiE) and ferroelectric (FE) state in $A$-site ordered LaScO$_{3}$/BiScO$_{3}$ and LaInO$_{3}$/BiInO$_{3}$ superlattices. Such a previously unreported ferroic transition is driven by the easy switching of cation displacements without changing the overall polarization direction or crystallographic symmetry. Epitaxial strains less than 2% are predicted to be sufficient to transverse the phase boundary, across which we capture a ~5X increase in electric polarization. In a fashion similar to classic Pb-based perovskite cera…
Using first-principles density functional theory, we study piezoelectricity in short-period superlattices made with combination of ferroelectric and paraelectric components and exhibiting polar discontinuities. We show that piezoelectric response of such a superlattice can be tuned both in terms of sign and magnitude with a choice of its components. As these superlattices with nonswitchable polarization do not undergo ferroelectric transitions, we predict them to exhibit a robust piezoelectric response with weaker temperature dependence compared to their bulk counterparts.
Organometallic lead halide perovskites are highly efficient materials for solar cells and other optoelectronic applications due to their high quantum efficiency and exceptional semiconducting properties. A peculiarity of these perovskites is the substantial ionic motion under external forces. Here, we reveal that electric field-and light-induced ionic motion in MAPbX3 crystals (X=Cl, Br, I and MA=CH3NH3) leads to unexpected piezoelectric-like response, an order of magnitude larger than in ferroelectric perovskite oxides. The nominal macroscopic symmetry of the crystals is broken by redistribut…
We report a more than 10-fold enhancement of the piezoelectric coefficient $d_{33}$ of polycrystalline CH$_3$NH$_3$PbI$_3$ (MAPbI$_3$) films when interfacing them with ferroelectric PbZr$_{0.2}$Ti$_{0.8}$O$_3$ (PZT). Piezo-response force microscopy (PFM) studies reveal $d_{33}^{MAPbI_3}$ values of ~0.3 pm/V for MAPbI$_3$ deposited on Au and ITO surfaces, with small phase angles fluctuating at length scales smaller than the grain size. In sharp contrast, on samples prepared on epitaxial PZT films, we observe large scale polar domains exhibiting clear, close to 90° PFM phase angles, pointing to …
Piezoelectrics have long been studied using parameterized models fit to experimental data, starting with the work of Devonshire in 1954. Much has been learned using such approaches, but they can also miss major phenomena if the materials properties are not well under-stood, as is exemplified by the realization that low-symmetry monoclinic phases are common around morphotropic phase boundaries, which was missed completed by low-order Devonshire models, and can only appear in higher order models. In the last 15 years, a new approach has developed using first-principles computations, based on fun…
A new lead-free (1-x)Li0.12Na0.88NbO3-xBaTiO3 (0 to x to 40) piezoelectric ceramics have been prepared using conventional ceramics processing route. Structural analysis revealed an existence of morphotropic phase boundary (MPB), separating orthorhombic and tetragonal phases, between the BaTiO3 content, x = 10-12.5. A partial phase diagram has been established based on temperature-dependent permittivity data for this new system and a nearly vertical temperature-independent MPB is observed. An improvement in electrical properties near MPB (e.g., for x = 12.5; εr = 10489 at Tm, d33 = 30 pC/N, kp …
There are two silver perovskite oxides: AgNbO3 and AgTaO3. AgNbO3 has a noncentrosymmetric group of Pmc21 at room temperature with a ferri-electric ordering of polarization. Such a ferri-electric state with small polarization can be changed into a ferroelectric state with very large polarization by a high electric field or by a chemical modification. The induced ferroelectric phase shows promising electromechanical response for applications in piezoelectric devices. In contrast, AgTaO3 is a quantum paraelectric, but ferroelectricity also can be induced through chemical substitution. The findin…
Next generation telecommunication technologies would benefit from strong piezoelectric and ferroelectric response in materials that are compatible with nitride radio-frequency electronic devices. Ferroelectric oxides with perovskite structure have been used in sensors and actuators for half a century, and halide perovskites transformed photovoltaics research in the past decade, but neither of them is compatible with nitride semiconductors. Nitride perovskites, despite numerous computational predictions, have not been experimentally demonstrated and their properties remain unknown. Here we repo…
The structural evolution of the strain-driven morphotropic phase boundary (MPB) in BiFeO3 films has been investigated using synchrotron x-ray diffractometry in conjunction with scanning probe microscopy. Our results demonstrate the existence of mixed-phase regions that are mainly made up of two heavily tilted ferroelectric triclinic phases. Analysis of first-principles computations suggests that these two triclinic phases originate from a phase separation of a single monoclinic state accompanied by elastic matching between the phase-separated states. These first-principle calculations further …
Piezoelectric and ferroelectric ceramics with a high Curie temperature (Tc) have attracted a growing attention owning to their applications under severe environments. In this work, phase structure, dielectric, ferroelectric and piezoelectric properties of (0.975-x)BiScO3-xPbTiO3-0.025Pb(Cd1/3Nb2/3)O3 ceramics (x = 0.58-0.64) were studied. A composition-induced structural transformation occurs from rhombohedral phase to tetragonal phase through an intermediate monoclinic phase with the increasing PT concentration. The relationship between structure and electrical properties of the system were d…
There is a general perception that large piezoelectric response in ferroelectric alloys requires tuning the system towards a morphotropic phase boundary (MPB), i.e., a composition driven inter-ferroelectric instability. Here we show that high piezoelectric response can be realized even in non-MPB alloy systems. This is demonstrated on (1-x)PbTiO3-(x)Bi(Zr0.5Ni0.5)O3 (PT-BNZ) by a comprehensive study involving electric-field and temperature dependent XRD, Raman spectroscopy, dielectric, piezoelectric and high field electrostrain measurements. We found that poling-field irreversibly suppresses t…
