Electrical and magnetic properties of nano-scale Pi-junctions
Samanta Piano
备注：
30 pages, 27 figures. To be published as an invited research chapter in the book "Spintronics: Materials, Applications and Devices", G. C. Lombardi et al. (eds.), Nova Science Publishers (2008, in press)
The physics of the "Pi" phase shift in ferromagnetic Josephson junctions enables a range of applications for spin-electronic devices and quantum computing. In this respect our research is devoted to the evaluation of the best materials for the development and the realization of the quantum devices based on superconductors and at the same point towards the reduction of the size of the employed heterostructures towards and below nano-scale. In this chapter we report our investigation of transitions from "0" to "Pi" states in Nb Josephson junctions with strongly ferromagnetic barriers of Co, Ni, Ni$_{80}$Fe$_{20}$ (Py) and Fe. We show that it is possible to fabricate nanostructured Nb/ Ni(Co, Py, Fe)/Nb $π$-junctions with a nano-scale magnetic dead layer and with a high level of control over the ferromagnetic barrier thickness variation. In agreement with the theoretical model we estimate, from the oscillations of the critical current as function of the ferromagnetic barrier thickness, the exchange energy of the ferromagnetic material and we obtain that it is close to bulk ferromagnetic materials implying that the ferromagnet is clean and S/F roughness is minimal. We conclude that S/F/S Josephson junctions are viable structures in the development of superconductor-based quantum electronic devices; in particular Nb/Co/Nb and Nb/Fe/Nb multilayers with their low value of the magnetic dead layer and high value of the exchange energy can readily be used in controllable two-level quantum information systems. In this respect, we discuss applications of our nano-junctions to engineering magnetoresistive devices such as programmable pseudo-spin-valve Josephson structures.
We demonstrated doping in 2D monolayer graphene via local electrical stressing. The doping, confirmed by the resistance-voltage transfer characteristics of the graphene system, is observed to continuously tunable from N-type to P-type as the electrical stressing level (voltage) increases. Two major physical mechanisms are proposed to interpret the observed phenomena: modifications of surface chemistry for N-type doping (at low-level stressing) and thermally-activated charge transfer from graphene to SiO2 substrate for P-type doping (at high-level stressing). The formation of P-N junction on 2D…
Many nanoelectronic devices rely on thin dielectric barriers through which electrons tunnel. For instance, aluminium oxide barriers are used as Josephson junctions in superconducting electronics. The reproducibility and drift of circuit parameters in these junctions are affected by the uniformity, morphology, and composition of the oxide barriers. To improve these circuits the effect of the atomic structure on the electrical response of aluminium oxide barriers must be understood. We create three-dimensional atomistic models of aluminium oxide tunnel junctions and simulate their electronic tra…
In our proof-of-principle study we examine the influence of skyrmions on magnetoresistive transport. In particular, we show that magnetic tunnel junctions are a technologically appealing and promising way for electrical detection of non-collinear magnetic structures. The calculated effect is shown to originate from scattering between different k-states and cannot be identified through densities of states alone. Our results suggest that the detection efficiency strongly depends on the utilized materials.
The metal-semiconductor (M-S) junction based devices are commonly used in all sorts of electronic devices. Their electrical properties are defined by the metallic phase properties with a respect to the semiconductor used. Here we make an in-depth survey on the origin of the M-S junction at the atomic scale by studying the properties of the AuIn2 nanoelectrodes formed on the InP(001) surface by the in situ electrical measurements in combination with a detailed investigation of atomically resolved structure supported by the first-principle calculations of its local electrical properties. We have…
By means of the nonequilibrium Green function technique, the effect of spin-flip scatterings on the spin-dependent electrical transport in ferromagnet-insulator-ferromagnet (FM-I-FM) tunnel junctions is investigated. It is shown that Julliere's formula for the tunnel conductance must be modified when including the contribution from the spin-flip scatterings. It is found that the spin-flip scatterings could lead to an angular shift of the tunnel conductance, giving rise to the junction resistance not being the largest when the orientations of magnetizations in the two FM electrodes are antipara…
Cuprous (I) oxide (Cu_{2}O) based solar cells were fabricated with the use of the electrodeposition technique at nanometre scale, and the structural, morphological and electrical properties were investigated. The Cu_{2}O layers were electrodeposited on crystalline and polycrystalline copper substrates. To complete the Cu_{2}O/Cu(100) and Cu_{2}O/Cu interfaces as the solar cells the top electrodes of silver paste were painted on the rear of Cu_{2}O. The theoretical analysis of the current voltage curve was provided to determine the values of electrical parameters of the most efficient solar cel…
We propose and analize a graphene tunneling transit time device based on a heterostructure with a lateral p-i-n junction electrically induced in the graphene layer by the applied gate voltages of different polarity. The depleted i-section of the graphene layer (between the gates) serves as both the tunneling injector and the transit region. Using the developed device model, we demonstrate that the ballistic transit of electrons and holes generated due to interband tunneling in the i-section results in the negative ac conductance in the terahertz frequency range, so that the device can serve as…
Narrow gaps are formed in suspended single to few layer graphene devices using a pulsed electrical breakdown technique. The conductance of the resulting devices can be programmed by the application of voltage pulses, with a voltage of 2.5V~4.5V corresponding to an ON pulse and voltages ~8V corresponding to OFF pulses. Electron microscope imaging of the devices shows that the graphene sheets typically remain suspended and that the device conductance tends to zero when the observed gap is large. The switching rate is strongly temperature dependent, which rules out a purely electromechanical swit…
We address the quality of electrical contact between carbon nanotubes and metallic electrodes by performing first-principles calculations for the electron transmission through ideal 2- and 3-terminal junctions, thus revealing the physical limit of tube-metal conduction. The structural model constructed involves surrounding the tube by the metal atoms of the electrode as in most experiments; we consider metallic (5,5) and n-doped semiconducting (10,0) tubes surrounded by Au or Pd. In the case of metallic tubes, the contact conductance is shown to approach the ideal 4e^2/h in the limit of large …
Epitaxially grown, high quality semiconductor InSb nanowires are emerging material systems for the development of high performance nanoelectronics and quantum information processing and communication devices, and for the studies of new physical phenomena in solid state systems. Here, we report on measurements of a superconductor-normal conductor-superconductor junction device fabricated from an InSb nanowire with aluminum based superconducting contacts. The measurements show a proximity induced supercurrent flowing through the InSb nanowire segment, with a critical current tunable by a gate, i…
We present an atomistic theory of electronic transport through single organic molecules that reproduces the important features of the current-voltage characteristics observed in recent experiments. We trace these features to their origin in the electronic structure of the molecules and their local atomic environment. We demonstrate how conduction channels arise from the molecular orbitals and elucidate which specific properties of the individual orbitals determine their contribution to the current.
Current Induced Resistance Switching (CIS) was recently observed in thin tunnel junctions (TJs) with ferromagnetic (FM) electrodes and attributed to electromigration of metallic atoms in nanoconstrictions in the insulating barrier. The CIS effect is here studied in TJs with two thin (20 Å) non-magnetic (NM) Ta electrodes inserted above and below the insulating barrier. We observe resistance (R) switching for positive applied electrical current (flowing from the bottom to the top lead), characterized by a continuous resistance decrease and associated with current-driven displacement of metallic…
We report the synthesis and the electrical properties of fullerene-based molecular junctions on silicon substrate in which the highly π-conjugated molecule C60 (πquantum well) is isolated from the electrodes by alkyl chains (σtunnel barriers). Initially, the Si/SiO2/\sigmaC60 architecture was prepared either by sequential synthesis (3 different routes) or by direct grafting of the presynthesized C60-σ-Si(OEt)3 molecule. We described the chemical synthesis of these routes and the physico-chemical properties of the molecular monolayers. Then, the second σtunnel barrier was added on the Si/SiO2/σ…
Graphene nano-ribbons junctions based electronic devices are proposed in this Letter. Non-equilibrium Green function calculations show that nano-ribbon junctions tailored from single layer graphene with different edge shape and width can act as metal-semiconductor junctions and quantum dots can be implemented. In virtue of the possibilities of patterning monolayer graphene down to atomic precision, these structures, quite different from the previously reported two-dimensional bulk graphene or carbon nanotube devices, are expected to be used as the building blocks of the future nano-electronics…
Nano-junctions, containing atomic-scale gold contacts between strongly disordered leads, exhibit different transport properties at room temperature and at low temperature. At room temperature, the nano-junctions exhibit conductance quantization effects. At low temperatures, the contacts exhibit Coulomb-Blockade. We show that the differences between the room-temperature and low temperature properties arise from the localization of electronic states in the leads. The charging energy and capacitance of the nano-junctions exhibit strong fluctuations with applied magnetic field at low temperature, …
Using empirical scheme, atomic structure of a new exotic class of silicon nanoclusters was elaborated upon the central icosahedral core (Si-IC) and pentagonal petals (Si-PP) growing from Si-IC vertexes. It was shown that Si-IC/Si-PP interface formation is energetically preferable. Some experimental observations of silicon nanostructures can be explained by presence of the proposed objects. The Extended Huckel Theory electronic structure calculations demonstrate an ability of the proposed objects to act as nanoscale tunnel junctions.
In this contribution we demonstrate structural control over a transport resonance in HS(CH$_{2}$)$_{n}$[1,4 - C$_{6}$H$_{4}$](CH$_{2}$)$_{n}$SH (n = 1, 3, 4, 6) metal - molecule - metal junctions, fabricated and tested using the scanning tunnelling microscopy-based $I(z)$ method. The Breit-Wigner resonance originates from one of the arene $π$-bonding orbitals, which sharpens and moves closer to the contact Fermi energy as $n$ increases. Varying the number of methylene groups thus leads to a very shallow decay of the conductance with the length of the molecule. We demonstrate that the electrica…
Nanowire devices have long been proposed as an efficient alternative to their planar counterparts for different optoelectronic applications. Unfortunately, challenges related to the growth and characterization of doping and p-n junction formation in nanowire devices (along axial or radial axis) have significantly impeded their development. The problems are further amplified if a p-n junction has to be implemented radially. Therefore, even though radial junction devices are expected to be on par with their axial junction counterparts, there are minimal reports on high-performance radial junctio…
Towards next-generation spintronics devices, such as computer memories and logic chips, it is necessary to satisfy high thermal stability, low-power consumption and high spin-polarization simultaneously. Here, from first-principles, we investigate thermal stability (both structure and magnetization) and the electric field control of magnetic anisotropy on Co2FeAl (CFA)/MgO. A phase diagram of structural thermal stability of the CFA/MgO interface is illustrated. An interfacial perpendicular-anisotropy, coming from the Fe-O orbital hybridization, provides high magnetic thermal stability and a lo…
One of the most fundamental devices for electronics and optoelectronics is the PN junction, which provides the functional element of diodes, bipolar transistors, photodetectors, LEDs, and solar cells, among many other devices. In conventional PN junctions, the adjacent p- and n-type regions of a semiconductor are formed by chemical doping. Materials with ambipolar conductance, however, allow for PN junctions to be configured and modified by electrostatic gating. This electrical control enables a single device to have multiple functionalities. Here we report ambipolar monolayer WSe2 devices in …
Nanoscale silicon p(+)-n junctions with very high concentration of boron, 5 10^21 cm-3, are found to demonstrate interesting optical properties. Emission band dominated in near-infrared electroluminescence (EL) spectra possesses high degree of the linear polarization along preferred crystallographic axis which can be controlled by the lateral voltage applied in the plane of the p(+)-n junction. Such behavior together with the temperature dependence of the EL intensity is attributed to the presence of the self-compensating dipole boron centers, B(+)-B(-), with negative correlation energy which …
The effect of nonmagnetic impurities and the effective masses on the spin-dependent transport in a ferromagnet-normal metal-ferromagnet junction is investigated on the basis of a two-band model. Our results show that impurities and the effective masses of electrons in two ferromagnetic electrodes have remarkable effects on the behaviors of the conductance, namely, both affect the oscillating amplitudes, periods, as well as the positions of the resonant peaks of the conductance considerably. The impurity tends to suppress the amplitudes of the conductance, and makes the spin-valve effect less o…
A method for the calculation of the conductance of nanoscale electrical junctions is extended to ab-initio electronic structure methods and applied to realistic models of metallic wires and break-junctions of sodium and gold. The method is systematically controllable and convergeable, and can be straightforwardly extended to include more complex processes and interactions. Important issues about the order in which are taken both the thermodynamic and the static (small field) limits are clarified, and characterized further through comparisons to model systems.
Despite the uniquely high thermal conductivity of graphene is well known, the exploitation of graphene into thermally conductive nanomaterials and devices is limited by the inefficiency of thermal contacts between the individual nanosheets. A fascinating yet experimentally challenging route to enhance thermal conductance at contacts between graphene nanosheets is through molecular junctions, allowing covalently connecting nanosheets otherwise interacting only via weak Van der Waals forces. Beside the bare existence of covalent connections, the choice of molecular structures to be used as therm…
In the present work, we have investigated the quantum transport in n Si junction less nanowire field effect transistors using 3 D, full band atomistic sp3d5s spin orbital coupled tight binding method. We have investigated the IDS VGS transfer characteristics, IDS VDS output characteristics, ON current, OFF current leakage, subthreshold swing and energy position resolved electron density spectrum Gn x, E in n Si junction less nanowire field effect transistors. We also study IDS VGS transfer characteristics with variation of High K gate materials. Quantum mechanical simulation is performed on th…
Inverse magnetoresistance has been observed in magnetic tunnel junctions with pinhole nanocontacts over a broad temperature range. The tunnel magnetoresistance undergoes a change of sign at higher bias and temperature. This phenomenon is attributed to the competition between the spin conserved ballistic transport through the pinhole contact where the transmission probability is close to unity and spin polarized tunneling across the insulating spacer with weak transmittivity.
We report measurements of magnetic switching and steady-state magnetic precession driven by spin-polarized currents in nanoscale magnetic tunnel junctions with low-resistance, < 5 Ohm-micron-squared, barriers. The current densities required for magnetic switching are similar to values for all-metallic spin-valve devices. In the tunnel junctions, spin-transfer-driven switching can occur at voltages that are high enough to quench the tunnel magnetoresistance, demonstrating that the current remains spin-polarized at these voltages.
Photocurrents in nanotube p-n junctions are calculated using a non-equilibrium Green function quantum transport formalism. The short-circuit photocurrent displays band-to-band transitions and photon-assisted tunneling, and has multiple sharp peaks in the infrared, visible, and ultraviolet ranges. The operation of such devices in the nanoscale regime leads to unusual size effects, where the photocurrent scales linearly and oscillates with device length. The oscillations can be related to the density of states in the valence band, a factor that also determines the relative magnitude of the photo…
Thermoelectric junctions are often made of components of different materials characterized by distinct transport properties. Single material junctions, with the same type of charge carriers, have also been considered to investigate various classical and quantum effects on the thermoelectric properties of nanostructured materials. We here introduce the concept of defect-induced thermoelectric voltage, namely, {\it thermodefect voltage}, in graphene nanoribbon (GNR) junctions under a temperature gradient. Our thermodefect junction is formed by two GNRs with identical properties except the existe…
Towards a novel magnetoresistance (MR) device with a carbon nanotube, we propose ``nonmagnetic metal/zigzag nanotube encapsulating magnetic atoms/nonmagnetic metal'' junctions. We theoretically investigate how spin-polarized edges of the nanotube and the encapsulated magnetic atoms influence on transport. When the on-site Coulomb energy divided by the magnitude of transfer integral, $U/|t|$, is larger than 0.8, large MR effect due to the direction of spins of magnetic atoms, which has the magnitude of the MR ratio of about 100%, appears reflecting such spin-polarized edges.
