Theoretical investigations of spin transfer torque in magnetic tunnel junctions using the tight-binding model in the framework of non-equilibrium Green functions formalism are presented. We show that the behavior of the spin transfer torque as a function of applied voltage can vary over a wide range depending on the band parameters of the ferromagnetic electrodes and the insulator that comprise the magnetic tunnel junction. The behavior of both the parallel and perpendicular components of the spin torque is addressed. This behavior is explained in terms of the spin and charge current dependence and on the interplay between evanescent states in the insulator and the Fermi surfaces of ferromagnetic electrodes comprising the junction. The origin of the perpendicular (field-like) component of spin transfer torque at zero bias, i.e. exchange coupling through the barrier between ferromagnetic electrodes is discussed.
We investigate the dependence of switching current density on the junction sizes in the spin transfer torque nanopillar structures by using micromagnetic simulations. While the macro spin model predicts weak dependence of switching current density on the junction sizes, we find that the switching current density is a sensitive function of the junction sizes. It can be explained with the complicated spin configurations and dynamics during the switching process. The detail spin configurations and dynamics are determined by spin wave excitation with the finite wave vector, which is related with t…
We present a detailed study of the spin-torque diode effect in CoFeB/MgO/CoFe/NiFe magnetic tunnel junctions. From the evolution of the resonance frequency with magnetic field at different angles, we clearly identify the free-layer mode and find an excellent agreement with simulations by taking into account several terms for magnetic anisotropy. Moreover, we demonstrate the large contribution of the out-of-plane torque in our junctions with asymmetric electrodes compared to the in-plane torque. Consequently, we provide a way to enhance the sensitivity of these devices for the detection of micr…
Magnetic tunnel junctions for spin-transfer torque switching were prepared to investigate the dielectric breakdown. The breakdown occurs typically at voltages not much higher than the switching voltages, a bottleneck for the implementation of spin-transfer torque Magnetic Random Access Memory. Intact and broken tunnel junctions are characterized by transport measurements and then prepared for transmission electron microscopy and energy dispersive x-ray spectrometry by focussed ion beam. The comparison to our previous model of the electric breakdown for thicker MgO tunnel barriers reveals signi…
We present a study of the spin transfer torque oscillator based on CoFeB/MgO/CoFeB asymmetric magnetic tunnel junctions. We observe microwave precession in junctions with different thickness of the free magnetization layer. Taking advantage of the ferromagnetic interlayer exchange coupling between the free and reference layer in the MTJ and perpendicular interface anisotropy in thin CoFeB electrode we demonstrate the nanometer scale device that can generate high frequency signal without external magnetic field applied. The amplitude of the oscillation exceeds 10 nV/Hz^0.5 at 1.5 GHz.
We study the bias-dependent spin-transfer torque in magnetic tunnel junctions in the Stoner model by scattering theory. We show that the in-plane (Slonczewski type) torque vanishes and subsequently reverses its direction when the bias voltage becomes larger or the barrier wider than material and device-dependent critical values. We are able to reproduce the magnitude and the bias dependence of measured in-plane and out-of-plane torques using realistic parameters. The condition for the vanishing torque is summarized by a phase diagram depending on the applied bias and barrier width, which is ex…
We explore the prospects of wafer scale inductive probing of the critical current density $j^{c0}$ for spin transfer torque switching of a CoFeB/MgO/CoFeB magnetic tunnel junction with varying MgO thickness. From inductive measurements magnetostatic parameters and the effective damping are derived and $j^{c0}$ is calculated based on spin transfer torque equations. The inductive values compare well to the values derived from current induced switching measurements on individual nanopillars. Using a wafer scale inductive probe head could in the future enable wafer probe station based metrology of…
Tunneling spectroscopy is applied to tunnel junctions with only one or no ferromagnetic electrode to study the excitation of quasi particles in magnetic tunnel junctions. The bias dependence is investigated with high accuracy by inelastic electron tunneling spectroscopy. Both types of junctions show a zero bias anomaly that is different in size and sign compared to magnetic tunnel junctions, i.e. junctions with two ferromagnetic electrodes. A pronounced difference is also found depending on the material that is probed by the tunneling electrons, which might be attributed to the excitation of m…
We present an {\it ab-initio} study of the spin-transfer torque in a Fe/MgO/FePt/Fe magnetic tunnel junctions. We consider a FePt film with a thickness up to six unit cells, either in direct contact with the MgO spacer or with an intercalated ultra-thin Fe seed layer. We find that in the FePt layer the torque is not attenuated as strongly as in the case of pure Fe. Moreover, in FePt the torque alternates sign at the Fe and Pt atomic planes throughout the stack for all FePt thicknesses considered. Finally, when Fe is intercalated between MgO and L$1_0$-FePt, the torque is sharply attenuated and…
Joint influence of two effects, namely, nonequilibrium spin injection by current, and current induced surface torque, on spin-valve type ferromagnetic metallic junctions is considered theoretically. The CPP configuration is assumed. The consideration is based on solving a coupled set of equations of motion for the mobile electron and lattice magnetizations. Boundary conditions are derived from the total magnetization flux continuity condition. A dispersion relation is derived for current dependent spin-wave fluctuations. The fluctuations become unstable under current density exceeding some thr…
Using magnetron sputtering, we have prepared Co-Fe-B/tunnel barrier/Co-Fe-B magnetic tunnel junctions with tunnel barriers consisting of alumina, magnesia, and magnesia-alumina bilayer systems. The highest tunnel magnetoresistance ratios we found were 73% for alumina and 323% for magnesia-based tunnel junctions. Additionally, tunnel junctions with a unified layer stack were prepared for the three different barriers. In these systems, the tunnel magnetoresistance ratios at optimum annealing temperatures were found to be 65% for alumina, 173% for magnesia, and 78% for the composite tunnel barrie…
Voltage-driven spin transfer torque in a magnetic tunnel junction comprising magnetic insulating electrodes is studied theoretically. In contrast with the conventional magnetic tunnel junctions comprising transition metal ferromagnets, the spin transfer torque presents unconventional bias dependencies, related to the presence of spin-dependent Fowler-Nordheim tunneling processes. In particular, we find that (i) the out-of-plane torque generally dominates the in-plane torque, (ii) out-of-plane torque and in-plane torque are symmetric and asymmetric at low bias voltage, respectively, and (iii) b…
We demonstrate spin torque induced auto-oscillation in MgO-based magnetic tunnel junctions. At the generation threshold, we observe a strong line narrowing down to 6 MHz at 300K and a dramatic increase in oscillator power, yielding spectrally pure oscillations free of flicker noise. Setting the synthetic antiferromagnet into autooscillation requires the same current polarity as the one needed to switch the free layer magnetization. The induced auto-oscillations are observed even at zero applied field, which is believed to be the acoustic mode of the synthetic antiferromagnet. While the phase c…
InGaN/GaN tunnel junction contacts were grown on top of an InGaN/GaN blue (450 nm) light emitting diode wafer using plasma assisted molecular beam epitaxy. The tunnel junction contacts enable low spreading resistance n-GaN top contact layer thereby requiring less top metal contact coverage on the surface. A voltage drop of 5.3 V at 100 mA, forward resistance of 2 x 10-2 ohm cm2 and a higher light output power are measured in tunnel junction LED. A low resistance of 5 x 10-4 ohm cm2 was measured in a MBE grown tunnel junction on GaN PN junction device, indicating that the tunnel junction LED de…
Enhanced interband tunnel injection of holes into a PN junction is demonstrated using P-GaN/InGaN/N-GaN tunnel junctions with a specific resistivity of 1.2 X 10-4 Ω cm2. The design methodology and low-temperature characteristic of these tunnel junctions is discussed, and insertion into a PN junction device is described. Applications of tunnel junctions in III-nitride optoelectronics devices are explained using energy band diagrams. The lower band gap and polarization fields reduce tunneling barrier, eliminating the need for ohmic contacts to p-type GaN. This demonstration of efficient tunnel i…
We calculate the spin-transfer torque in Fe/MgO/Fe tunnel junctions and compare the results to those for all-metallic junctions. We show that the spin-transfer torque is interfacial in the ferromagnetic layer to a greater degree than in all-metallic junctions. This result originates in the half metallic behavior of Fe for the $Δ_1$ states at the Brillouin zone center; in contrast to all-metallic structures, dephasing does not play an important role. We further show that it is possible to get a component of the torque that is out of the plane of the magnetizations and that is linear in the bias…
Crystallographic and spin polarized transport properties of (100) textured and (100) epitaxial Fe/MgO/Fe magnetic tunnel junctions are compared. Strong similarities in the transport properties show that structural coherence and magnetic quality at the 25 nm grain scale in textured junctions are sufficient to issue signatures of the spin polarized transport specific to a single crystal junction. This demonstrates that the lateral coherence of the Bloch tunneling wave function is identically limited in both systems. Our analysis leads to model the textured tunnel junction as a juxtaposition of n…
We demonstrate a simple network-analyzer technique to make quantitative measurements of the bias dependence of spin torque in a magnetic tunnel junction. We apply a microwave current to exert an oscillating spin torque near the ferromagnetic resonance frequency of the tunnel junction's free layer. This produces an oscillating resistance that, together with an applied direct current, generates a microwave signal that we measure with the network analyzer. An analysis of the resonant response yields the strength and direction of the spin torque at non-zero bias. We compare to measurements of the …
In quasi-magnetic tunnel junctions (QMTJs) with a EuS spin filter tunnel barrier between Al and Co electrodes, we observed large magnetoresistance (MR). The bias dependence shows an abrupt increase of MR ratio in high bias voltage, which is contrary to conventional magnetic tunnel junctions (MTJs). This behavior can be understood as due to Fowler-Nordheim tunneling through the fully spin-polarized EuS conduction band. The I-V characteristics and bias dependence of MR calculated using tunneling theory shows excellent agreement with experiment.
Spin transport in magnetic tunnel junctions in the presence of spin diffusion is considered theoretically. Combining ballistic tunneling across the barrier and diffusive transport in the electrodes, we solve the spin dynamics equation in the metallic layers. We show that spin diffusion mixes the transverse spin current components and dramatically modifies the bias dependence of the effective spin transfer torque. This leads to a significant linear bias dependence of the out-of-plane torque, as well as a non-conventional thickness dependence of both spin torque components.
We investigate the dependence of perpendicular and parallel spin transfer torque (STT) and tunneling magnetoresistance (TMR) on the insulator barrier energy in the magnetic tunnel junction (MTJ). We employed single orbit tight binding model combined with the Keldysh non-equilibrium Green's function method in order to calculate the perpendicular and parallel STT, and TMR in MTJ with the finite bias voltages. The dependences of STT and TMR on the insulator barrier energy are calculated for the semi-infinite half metallic ferromagnetic electrodes. We find that perfect linear relation between the …
We show that GdN nanoislands can enhance inter-band tunneling in GaN PN junctions by several orders of magnitude, enabling low optical absorption low-resistance tunnel junctions (specific resistivity 1.3 X 10-3 Ω-cm2) for various optoelectronic applications. We exploit the ability to overgrow high quality GaN over GdN nanoislands to create new nanoscale heterostructure designs that are not feasible in planar epitaxy. GdN nanoisland assisted inter-band tunneling was found to enhance tunneling in both of the polar orientations of GaN. Tunnel injection of holes was confirmed by low temperature op…
MgO based magnetic tunnel junctions are prepared to investigate the dielectric breakdown of the tunnel barrier. The breakdown is directly visualized by transmission electron microscopy measurements. The broken tunnel junctions are prepared for the microscopy measurements by focussed ion beam out of the junctions characterized by transport investigations. Consequently, a direct comparison of transport behavior and structure of the intact and broken junctions is obtained. Compared to earlier findings in Alumina based junctions, the MgO barrier shows much more microscopic pinholes after breakdown…
The spin-torque in magnetic tunnel junctions possesses two components that both depend on the applied voltage. Here, we develop a new method for the accurate extraction of this bias-dependence from experiments over large voltage ranges. We study several junctions with different magnetic layer structures of the top electrode. Our results obtained on junctions with symmetric CoFeB electrodes agree well with theoretical calculations. The bias-dependences of asymmetric samples, with top electrodes containing NiFe, however, are twisted compared to the quadratic form generally assumed. Our measureme…
We investigated electroforming-free bipolar resistive switching behavior in Pt/Ti/Al2O3/Al tunnel junctions where the Al2O3 tunnel barrier was naturally formed on Al in air. Various compliance current values for the junction's set switching successfully lead to various resistance values in its low resistance state, suggesting the possibility for multi-level-operation. A mechanism for the bipolar switching is qualitatively discussed in terms of the modulation of the tunnel barrier by the reactive Ti layer on top of the barrier.
We study the thermal transport in magnetic tunnel junctions. Thermal gradients across the tunneling barrier appear around the Fowler-Nordheim tunneling regime, due to the current-induced heat caused by quantum interference. Both thermovoltage and thermal temperature follow a linear response with the applied current, which is an evidence for a thermoelectric effect. By increasing the barrier transparency, the dynamics of thermoelectric properties is observed with the current. Accordingly, a large range of the Seebeck coefficient, 10 - 1000 μV/K, has been obtained in magnetic tunnel junctions.
Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and application of polarization engineered tunnel junctions for ultra-wide bandgap AlGaN (Al mole fraction higher than 50%) materials towards highly efficient UV LEDs. We demonstrate that polarization-induced 3D charge is beneficial in reducing tunneling barriers especially for high composition AlGaN tunnel junctions. The design of graded tunnel junction structure…
A standard route for fabrication of nanoscopic tunnel junctions is via electromigration of lithographically prepared gold nanowires. In the lithography process, a thin adhesion layer, typically titanium, is used to promote the adhesion of the gold nanowires to the substrate. Here, we demonstrate that such an adhesion layer plays a vital role in the electrical transport behavior of electromigrated tunnel junctions. We show that junctions fabricated from gold deposited on top of a titanium adhesion layer are electrically stable at ambient conditions, in contrast to gold junctions without a titan…
We demonstrate efficient spin-polarized tunneling between a ferromagnetic metal and a ferromagnetic semiconductor with highly mismatched conductivities. This is indicated by a large tunneling magnetoresistance (up to 30%) at low temperatures in epitaxial magnetic tunnel junctions composed of a ferromagnetic metal (MnAs) and a ferromagnetic semiconductor (GaMnAs) separated by a nonmagnetic semiconductor (AlAs). Analysis of the current-voltage characteristics yields detailed information about the asymmetric tunnel barrier. The low temperature conductance-voltage characteristics show a zero bias …
Perpendicular magnetic tunnel junction with MgAl2O4 barrier is investigated. It is found that reactive RF sputtering with O2 is essential to obtain strong perpendicular magnetic anisotropy and large tunneling magnetoresistance in MgAl2O4-based junctions. An interfacial perpendicular magnetic anisotropy energy density of 2.25 mJ/m2 is obtained for the samples annealed at 400C. An enhanced magnetoresistance of 60% has also been achieved. The Vhalf, bias voltage at which tunneling magnetoresistance drops to half of the zero-bias value, is found to be about 1V, which is substantially higher than t…
Molecular bridges covalently bonded to two ferromagnetic electrodes can transform ferromagnetic materials and produce intriguing spin transport characteristics. This paper discusses the impact of molecule induced strong coupling on spin transport. To study the molecular coupling effect organometallic molecular complex (OMC) was bridged between two ferromagnetic electrodes of a magnetic tunnel junction (Ta/Co/NiFe/AlOx/NiFe/Ta) along the exposed side edges. OMCs induced strong iter-ferromagnetic electrode coupling to yield drastic changes in transport properties of the magnetic tunnel junction …
The objective of this work is to describe the tunnel electron current in single barrier magnetic tunnel junctions within a new approach that goes beyond the single-band transport model. We propose a ballistic multi-channel electron transport model that can explain the influence of in-plane lattice strain on the tunnel magnetoresistance as well as the asymmetric voltage behavior. We consider as an example single crystal magnetic Fe(110) electrodes for Fe/Insulator/Fe and Fe/Insulator/La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ tunnel junctions, where the electronic band structures of Fe and La$_{0.67}$Sr$_…
Commercially successful magnetic tunnel junction can harness the unmatched capabilities of molecular device elements by solving decade-old fabrication issues. Utilization of magnetic tunnel junction as a testbed for molecules also enables unprecedented magnetic studies of molecular spintronics devices. This paper utilizes magnetic force microscopy (MFM) to vividly show that organometallic molecules when bridged between two ferromagnetic electrodes along the magnetic tunnel junction edges, transformed the magnetic electrodes itself. Molecules impacted several hundred-micron areas of ferromagnet…
We present results of a study of tunnel junction aging in which the early time dynamics are captured by in situ monitoring of electrical properties of Al-AlOx-Al planar tunnel junctions beginning when the deposition of the counterelectrode is complete. The observed stretched exponential dependences of the conductance and the capacitance manifest hierarchically constrained dynamics imposed by correlated relaxations of interface traps. Bias voltage is used as a control parameter to create bias-dependent aging trajectories that exhibit memory and age-dependent relaxations. Simple tunnel barrier a…
Magnetic tunnel junctions with the layer sequence Co$_2$Cr$_{0.6}$Fe$_{0.4}$Al/MgO/CoFe were fabricated by magnetron sputtering at room temperature (RT). The samples exhibit a large inverse tunneling magnetoresistance (TMR) effect of up to -66% at RT. The largest value of -84% at 20 K reflects a rather weak influence of temperature. The dependence on the voltage drop shows an unusual behavior with two almost symmetric peaks at $\pm600$ mV with large inverse TMR ratios and small positive values around zero bias.
We examine the spin torque (ST) response of magnetic tunnel junctions (MTJs) with ultra-thin MgO tunnel barrier layers to investigate the relationship between the spin-transfer torque and the tunnel magnetoresistance (TMR) under finite bias. We find that the spin torque per unit current exerted on the free layer decreases by less than 10% over a bias range where the TMR decreases by over 40%. We examine the implications of this result for various spin-polarized tunneling models and find that it is consistent with magnetic-state-dependent effective tunnel decay lengths.
We consider theoretically a current flowing perpendicular to interfaces of a spin-valve type ferromagnetic metallic junction. For the first time an effective approach is investigated to calculate a simultaneous action of the two current effects, namely, the nonequilibrium longitudinal spin injection and the transversal spin-transfer surface torque. Dispersion relation for fluctuations is derived and solved. Nonlinear problem is solved about steady state arising due to instability for a thick enough free layer.
We have fabricated nanoscale magnetic tunnel junctions (MTJs) with an additional fixed magnetic layer added above the magnetic free layer of a standard MTJ structure. This acts as a second source of spin-polarized electrons that, depending on the relative alignment of the two fixed layers, either augments or diminishes the net spin-torque exerted on the free layer. The compound structure allows a quantitative comparison of spin-torque from tunneling electrons and from electrons passing through metallic spacer layers, as well as analysis of Joule selfheating effects. This has significance for c…
Several experimental techniques have been introduced in recent years in attempts to measure spin transfer torque in magnetic tunnel junctions (MTJs). The dependence of spin torque on bias is important for understanding fundamental spin physics in magnetic devices and for applications. However, previous techniques have provided only indirect measures of the torque and their results to date for the bias dependence are qualitatively and quantitatively inconsistent. Here we demonstrate that spin torque in MTJs can be measured directly by using time-domain techniques to detect resonant magnetic pre…
Current-induced spin-transfer torques (STT) and spin-orbit torques (SOT) enable the electrical switching of magnetic tunnel junctions (MTJs) in nonvolatile magnetic random access memories. In order to develop faster memory devices, an improvement of the timescales underlying the current driven magnetization dynamics is required. Here we report all-electrical time-resolved measurements of magnetization reversal driven by SOT in a three-terminal MTJ device. Single-shot measurements of the MTJ resistance during current injection reveal that SOT switching involves a stochastic two-step process con…
We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and the read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density $5\times10^{11}$ A/m$^2$ in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof…
The discovery of spin torque transfer (STT) has lead to a significant advance in the development of spintronic devices. Novel structures and materials have been studied in order to improve the performance of the magnetic tunnel junctions (MTJs) performances and understand the fundamental physics in spin torque transfer. The adiabatic spin torque effect, which is due to the spatial non-uniformity of magnetic properties, has been predicted in theory and demonstrated experimentally in magnetic nanowires. However, this important spin torque has been rarely concerned in the magnetic tunnel junction…
Current-induced spin-orbit torques provide a versatile tool for switching magnetic devices. In perpendicular magnets, the dampinglike component of the torque is the main driver of magnetization reversal. The degree to which the fieldlike torque assists the switching is a matter of debate. Here we study the switching of magnetic tunnel junctions with a CoFeB free layer and either W or Ta underlayers, which have a ratio of fieldlike to dampinglike torque of 0.3 and 1, respectively. We show that the fieldlike torque can either assist or hinder the switching of CoFeB when the static in-plane magne…
The nonlinear frequency shift coefficient, which represents the strength of the transformation of amplitude fluctuations into phase fluctuations of an oscillator, is measured for MgO-based spin-torque oscillators by analyzing the current dependence of the power spectrum. We have observed that linewidth against inverse normalized power plots show linear behavior below and above the oscillation threshold as predicted by the analytical theories for spin-torque oscillators. The magnitude of the coefficient is determined from the ratio of the linear slopes. Small magnitude of the coefficient has be…
We use three-terminal magnetic tunnel junctions (MTJs) designed for field-free switching by spin-orbit torques (SOTs) to systematically study the impact of dual voltage pulses on the switching performances. We show that the concurrent action of an SOT pulse and an MTJ bias pulse allows for reducing the critical switching energy below the level typical of spin transfer torque while preserving the ability to switch the MTJ on the sub-ns time scale. By performing dc and real-time electrical measurements, we discriminate and quantify three effects arising from the MTJ bias: the voltage-controlled …
Application of Bardeen's tunneling theory to magnetic tunnel junctions having a general degree of atomic disorder reveals the close relationship between magneto-conduction and voltage-driven pseudo-torque, as well as the thickness dependence of tunnel-polarization factors. Among the results: 1) The torque generally varies as sin theta at constant applied voltage. 2) Whenever polarization factors are well defined, the voltage-driven torque on each moment is uniquely proportional to the polarization factor of the other magnet. 3) At finite applied voltage, this relation predicts significant volt…
Spin-transfer ferromagnetic resonance (ST-FMR) in symmetric magnetic tunnel junctions (MTJs) with a varied thickness of the MgO tunnel barrier (0.75 nm < $t_{MgO}$ < 1.05 nm) is studied using the spin-torque diode effect. The application of an RF current into nanosized MTJs generates a DC mixing voltage across the device when the frequency is in resonance with the resistance oscillations arising from the spin transfer torque. Magnetization precession in the free and reference layers of the MTJs is analyzed by comparing ST-FMR signals with macrospin and micromagnetic simulations. From ST-FMR sp…
We prepared magnetic tunnel junctions with one ferromagnetic and one superconducting Al-Si electrode. Pure cobalt electrodes were compared with a Co-Fe-B alloy and the Heusler compound Co2FeAl. The polarization of the tunneling electrons was determined using the Maki-Fulde-model and is discussed along with the spin-orbit scattering and the total pair-breaking parameters. The junctions were post-annealed at different temperatures to investigate the symmetry filtering mechanism responsible for the giant tunneling magnetoresistance ratios in Co-Fe-B/ MgO/ Co-Fe-B junctions.
We discuss the coherence of magnetic oscillations in a magnetic tunnel junction-based spin-torque oscillator as a function of external field angle. Time-frequency analysis shows mode-hopping between distinct oscillator modes, which arises from linear and nonlinear couplings in the Landau-Lifshitz-Gilbert equation, analogous to mode-hopping observed in semiconductor ring lasers. These couplings and therefore mode-hopping are minimized near the current threshold for antiparallel (AP) alignment of free layer with reference layer magnetization. Away from the AP alignment, mode-hopping limits oscil…
This letter introduces a micromagnetic model able to characterize the magnetization dynamics in three terminal magnetic tunnel junctions, where the effects of spin-transfer torque and spin-orbit torque are taken into account. Our results predict that the possibility to separate electrically those two torque sources is very promising from a technological point of view for both next generation of nanoscale spintronic oscillators and microwave detectors. A scalable synchronization scheme based on the parallel connection of those three terminal devices is also proposed.
The tunnel magnetoresistance (TMR) in the magnetic tunnel junction (MTJ) with embedded nanoparticles (NPs) was calculated in range of the quantum-ballistic model. The simulation was performed for electron tunneling through the insulating layer with embedded magnetic and nonmagnetic NPs within the approach of the double barrier subsystem connected in parallel to the single barrier one. This model can be applied for both MTJs with in-plane magnetization and perpendicular one. We also calculated the in-plane component of the spin transfer torque (STT) versus the applied voltage in MTJs with magne…
We analyse the phenomenon of back-hopping in spin-torque induced switching of the magnetization in perpendicularly magnetized tunnel junctions. The analysis is based on single-shot time-resolved conductance measurements of the pulse-induced back-hopping. Studying several material variants reveals that the back-hopping is a feature of the nominally fixed system of the tunnel junction. The back-hopping is found to proceed by two sequential switching events that lead to a final state P' of conductance close to --but distinct from-- that of the conventional parallel state. The P' state does not ex…
The magnetic tunnel junction is a cornerstone of spintronic devices and circuits, providing the main way to convert between magnetic and electrical information. In state-of-the-art magnetic tunnel junctions, magnesium oxide is used as the tunnel barrier between magnetic electrodes, providing a uniquely large tunnel magnetoresistance at room temperature. However, the wide bandgap and band alignment of magnesium oxide-iron systems increases the resistance-area product and causes challenges of device-to-device variability and tunnel barrier degradation under high current. Here, we study using fir…
We investigate a wafer scale tunnel junction fabrication method, where a plasma etched via through a dielectric layer covering bottom Al electrode defines the tunnel junction area. The ex-situ tunnel barrier is formed by oxidation of the bottom electrode in the junction area. Room temperature resistance mapping over a 150 mm wafer give local deviation values of the tunnel junction resistance that fall below 7.5 % with an average of 1.3 %. The deviation is further investigated by sub-1 K measurements of a device, which has one tunnel junction connected to four arrays consisting of N junctions (…
We show that direct current in a tantalum microstrip can induce steady-state magnetic oscillations in an adjacent nanomagnet through spin torque from the spin Hall effect (SHE). The oscillations are detected electrically via a magnetic tunnel junction (MTJ) contacting the nanomagnet. The oscillation frequency can be controlled using the MTJ bias to tune the magnetic anisotropy. In this 3-terminal device the SHE torque and the MTJ bias therefore provide independent controls of the oscillation amplitude and frequency, enabling new approaches for developing tunable spin torque nano-oscillators.
Precisely engineered tunnel junctions exhibit a long sought effect that occurs when the energy of the electron is comparable to the potential energy of the tunneling barrier. The resistance of metal-insulator-metal tunnel junctions oscillates with an applied voltage when electrons that tunnel directly into the barrier's conduction band interfere upon reflection at the classical turning points: the insulator-metal interface, and the dynamic point where the incident electron energy equals the potential barrier inside the insulator. A model of tunneling between free electron bands using the exact…
Spin dependent single electron tunneling in ferromagnetic double junctions is analysed theoretically in the limit of sequential tunneling. The influence of discrete energy spectrum of the central electrode (island)on the spin accumulation, spin fluctuations and tunnel magnetoresistance is analysed numerically in the case of a nonmagnetic island. It is shown that spin fluctuations are significant in magnetic as well as in nonmagnetic junctions.
We study the effect of strain on magnetic tunnel junctions (MTJ) induced by a diamond like carbon (DLC) film. The junction resistance as well as the tunnel magnetoresistance (TMR) reduces with the DLC film. Non-equilibrium Green's function quantum transport calculations show that the application of biaxial strain increases the conductance for both the parallel and anti-parallel configurations. However, the conductance for the minority channel and for the anti-parallel configuration is significantly more sensitive to strain, which drastically increases transmission through a MgO tunnel barrier,…
Magnetic tunnel junctions with wide band gap semiconductor ZnTe barrier were fabricated. A very low barrier height and sizable magnetoresistance were observed in the Fe/ZnTe/Fe junctions at room temperature. The nonlinear I-V characteristic curve confirmed the observed magnetoresistance is due to spin-dependent tunneling effect. Temperature dependent study indicated that the total conductance of the junction is dominated by direct tunneling, with only a small portion from the hopping conduction through the defect states inside the barrier.
