We have studied the adsorption of gas molecules (CO, NO, NO2, O2, N2, CO2, and NH3) on graphene nanoribbons (GNRs) using first principles methods. The adsorption geometries, adsorption energies, charge transfer, and electronic band structures are obtained. We find that the electronic and transport properties of the GNR with armchair-shaped edges are sensitive to the adsorption of NH3 and the system exhibits n type semiconducting behavior after NH3 adsorption. Other gas molecules have little effect on modifying the conductance of GNRs. Quantum transport calculations further indicate that NH3 molecules can be detected out of these gas molecules by GNR based sensor.
We have studied the adsorption of Li atoms at the hollow sites of graphene nanoribbons (zigzag and armchair), graphene, and fullerenes by means of density functional theory calculations including local and semilocal functionals. The binding energy of a Li atom on armchair nanoribbons (of about 1.70 eV for LSDA and 1.20 eV for PBE) is comparable to the corresponding value in graphene (1.55 and 1.04 eV for LSDA and PBE, respectively). Notably, the interaction between Li and zigzag nanoribbons is much stronger. The binding energy of Li at the edges of zigzag nanoribbons is about 50% stronger than…
We study numerically the adsorption of a mixture of CO$_2$ and CH$_4$ on a graphite substrate covered by graphene nanoribbons (NRs). The NRs are flat and parallel to the graphite surface, at a variable distance ranging from 6 Å to 14 Å. We show that the NRs-graphite substrate acts as an effective filter for CO$_2$. Our study is based on Molecular Dynamics (MD) simulations. Methane is considered a spherical molecule, and carbon dioxide is represented as a linear rigid body. Graphite is modeled as a continuous material, while the NRs are approached atomistically. We observe that when the NRs are…
The anchoring of benzene molecules on lithium adsorption sites at the surface of graphene and nanoribbons thereof are investigated. The effects of adsorbate densities, specific adsorption locations, and spin states on the structural stability and electronic properties of the underlying graphene derivatives are revealed. At sufficiently high densities, bare lithium adsorption turns armchair graphene nanoribbons metallic and their zigzag counterparts half-metallic due to charge transfer from the adatom to the π electronic system. Upon benzene adsorption, the lithium cation encounters two π syste…
Using the density functional theory, we have demonstrated the chemical functionalization of semiconducting graphene nanoribbons (GNRs) with Stone-Wales (SW) defects by carboxyl (COOH) groups. It is found that the geometrical structures and electronic properties of the GNRs changed significantly, and the electrical conductivity of the system could be considerably enhanced by mono-adsorption and double-adsorption of COOH, which sensitively depends upon the axial concentration of SW defects COOH pairs (SWDCPs). With the increase of the axial concentration of SWDCPs, the system would transform fro…
First-principles and semi-empirical tight binding calculations were performed to understand the adsorption of oxygen on the surface of two dimensional (2D) and zigzag stanene nano-ribbons. The intrinsic spin-orbit interaction is considered in the Kane-Mele tight binding model. The adsorption of an oxygen atom or molecule on the 2D stanene opens an electronic energy band gap. We investigate the helical edge states and topological phase in the pure zigzag stanene nano-ribbons. The adsorption of oxygen atoms on the zigzag stanene nano-ribbons deforms the helical edge states at the Fermi level whi…
The dramatic changes in electronic and magnetic properties are investigated using the first-principles calculations for (Cl, Br, I, At)-adsorbed graphene nanoribbons. The rich and unique features are clearly revealed in the adatom-dominated band structures, p-type doping, spin arrangement/magnetic moment, spatial charge distribution, and orbital- and spin-projected density of states. Halogen adsorptions can create the non-magnetic, ferromagnetic or anti-ferromagnetic metals, being mainly determined by concentrations and edge structures. The number of holes per unit cell increases with the adat…
Electronic structures of SiC nanoribbons have been studied by spin-polarized density functional calculations. The armchair nanoribbons are nonmagnetic semiconductor, while the zigzag nanoribbons are magnetic metal. The spin polarization in zigzag SiC nanoribbons is originated from the unpaired electrons localized on the ribbon edges. Interestingly, the zigzag nanoribbons narrower than $\sim$4 nm present half-metallic behavior. Without the aid of external field or chemical modification, the metal-free half-metallicity predicted for narrow SiC zigzag nanoribbons opens a facile way for nanomateri…
Atomic and electronic structures of phosphorene nanoribbons are studied within density functional theory. These novel materials present different physical phenomena expected in two very different physical systems: one dimensional metallic chains and semiconductor surfaces. While `rugged' nanoribbons are semiconducting in their layer-terminnated structures, pure `linear' and `zigzag' nanoribbons are metallic due to metallic edge states. Linear nanoribbons undergo edge reconstruction and zigzag nanoribbons beyond a certain width undergo Peierls transition leading to opening of a band gap in the …
Using the ab initio pseudopotential density functional method, we investigate the functionalization of halogen molecules into graphene-based nanostructures with zigzag and armchair edges. We find that halogen molecules adsorb through chemisorption on the zigzag edge carbon atoms with a binding energy of ~1-5 eV and their adsorption on a perfect zigzag edge is preferred, in sharp contrast to physisorption on the armchair edge and elsewhere where they adsorb with a binding energy of ~0.07 eV. We suggest that our findings would be utilized for an approach to the separation of zigzag graphene nano…
We investigated the vibrational properties of graphene nanoribbons by means of first-principles calculations on the basis of density functional theory. We confirm that the phonon modes of graphene nanoribbons with armchair and zigzag type edges can be interpreted as fundamental oscillations and their overtones. These show a characteristic dependence on the nanoribbon width. Furthermore, we demonstrate that a mapping of the calculated Gamma-point phonon frequencies of nanoribbons onto the phonon dispersion of graphene corresponds to an "unfolding" of nanoribbons' Brillouin zone onto that of gra…
Graphene nanoribbons have attracted attention for their novel electronic and spin transport properties1-6, and because nanoribbons less than 10 nm wide have a band gap that can be used to make field effect transistors. However, producing nanoribbons of very high quality, or in high volumes, remains a challenge. Here, we show that pristine few-layer nanoribbons can be produced by unzipping mildly gas-phase oxidized multiwalled carbon nanotube using mechanical sonication in an organic solvent. The nanoribbons exhibit very high quality, with smooth edges (as seen by high-resolution transmission e…
Growing graphene nanoribbons from small organic molecules encapsulated in carbon nanotubes can result in products with uniform width and chirality. We propose a method based on encapsulation of 1,2,4-trichlorobenzene from the liquid phase and subsequent annealing. This procedure results in graphene nanoribbons several tens of nanometers long. The presence of nanoribbons was proven by Raman spectra both on macroscopic samples and on the nanoscale by tip-enhanced Raman scattering and high-resolution transmission electron microscopic images.
Seven types of armchair graphyne nanoribbons are investigated with HSE06 functional. The quantum confinements in the graphyne nanoribbons open or increase the band gaps of the corresponding two-dimensional graphynes, which is crucial to high on/off ratio in electronic device operation. The major carrier mobilities of the graphyne nanoribbons with high percentage of sp hybridized carbon atoms are very large. The sparse linking pattern results in small number of frontier crystal orbitals and small deformation potential constants, which are responsible for the large carrier mobilities. Some graph…
We theoretically investigate the thermoelectric properties of zigzag graphene nanoribbons in the presence of extended line defects, substrate impurities and edge roughness along the nanoribbon's length. A nearest-neighbor tight-binding model for the electronic structure and a fourth nearest- neighbor force constant model for the phonon bandstructure are used. For transport we employ quantum mechanical non-equilibrium Green's function simulations. Starting from the pristine zigzag nanoribbon structure that exhibits very poor thermoelectric performance, we demonstrate how after a series of engin…
Graphene nanoribbons are prepared inside boron nitride nanotubes by liquid phase encapsulation and subsequent annealing of 1,2,4-trichlorobenzene. The product is imaged with high resolution transmission electron microscopy, and characterized by optical absorption and Raman spectroscopy. Carbon-containing material is detected inside the boron nitride nanotubes with energy-dispersive x-ray spectroscopy (EDS) and scanning transmission electron microscopy (STEM). The observed structures twist under the electron beam and the characteristic features of nanoribbons appear in the Raman spectra.
Armchair graphene nanoribbons with different proportions of edge oxygen atoms are investigated by using crystal orbital method based on density functional theory. All the nanoribbons are energetically favorable, although buckled edges are present. Isolated edge oxygen atoms cause semiconductor-metal transition via introducing edge states, while adjacent edge oxygen atoms not. For the graphene nanoribbons with all oxygen atoms on the edges, both band gap and carrier mobility alternate with respect to the ribbon width. The carrier mobilities are as 18%-65% large as those of the graphene nanoribb…
Novel route for the establishing of magnetism in realistic oxidized graphene nanoribbons is proposed. Modelling of the migration of hydroxyl groups from central part to the zig-zag edges of graphene nanoribbons passivated by oxygen are performed with using density functional theory. The presence of hydroxyl groups near the edges leads formation of dangling bonds there instead saturated due to oxidation and repairs of magnetism diminished by edges oxidation. The route of manufacturing and stability of new type of magnetic graphene nanoribbons are also discussed.
Using first-principles calculations and deformation potential theory, we investigate the intrinsic carrier mobility (μ) of monolayer MoS2 sheet and nanoribbons. In contrast to the dramatic three orders of magnitude of deterioration of μ in graphene upon forming nanoribbons, the magnitude of μ in armchair MoS2 nanoribbons is comparable to that in monolayer MoS2 sheet, albeit oscillating with width. Surprisingly, a room-temperature transport polarity reversal is observed with μ of hole (h) and electron (e) being 200.52 (h) and 72.16 (e) cm2V-1s-1 in sheet, and 49.72 (h) and 190.89 (e) cm2V-1s-1 …
One-dimensional (1D) materials have attracted significant research interest due to their unique quantum confinement effects and edge-related properties. Atomically thin 1D nanoribbon is particularly interesting because it is a valuable platform with physical limits of both thickness and width. Here, we develop a catalyst-free growth method and achieves the growth of Bi2O2Se nanostructures with tunable dimensionality. Significantly, Bi2O2Se nanoribbons with thickness down to 0.65 nm, corresponding to monolayer, are successfully grown for the first time. Electrical and optoelectronic measurement…
We show by first-principles calculations that the electronic properties of zigzag graphene nanoribbons (Z-GNRs) adsorbed on Si(001) substrate strongly depend on ribbon width and adsorption orientation. Only narrow Z-GNRs with even rows of zigzag chains across their width adsorbed perpendicularly to the Si dimer rows possess an energy gap, while wider Z-GNRs are metallic due to width-dependent interface hybridization. The Z-GNRs can be metastably adsorbed parallel to the Si dimer rows, but show uniform metallic nature independent of ribbon width due to adsorption induced dangling-bond states on…
The flexoelectric and electronic properties of zig-zag graphene nanoribbons are explored under mechanical bending using state of the art first principles calculations. A linear dependence of the bending induced out of plane polarization on the applied strain gradient is found. The inferior flexoelectric properties of graphene nanoribbons can be improved by more than two orders of magnitude by hydrogen and fluorine functionalization (CH and CF nanoribbons). A large out of plane flexoelectric effect is predicted for CF nanoribbons. The origin of this enhancement lies in the electro-negativity di…
Aligned graphene nanoribbon (GNR) arrays were made by unzipping of aligned single-walled and few-walled carbon nanotube (CNT) arrays. Nanotube unzipping was achieved by a polymer-protected Ar plasma etching method, and the resulting nanoribbon array was transferred onto any substrates. Atomic force microscope (AFM) imaging and Raman mapping on the same CNTs before and after unzipping confirmed that ~80% of CNTs were opened up to form single layer sub-10 nm GNRs. Electrical devices made from the GNRs (after annealing in H2 at high temperature) showed on/off current (Ion/Ioff) ratios up to 103 a…
We have explored the possibility of using low dimensional phosphorene based nanoscale device for the detection of nitroaromatic based explosives. In this work, we have investigated the structural, electronic, adsorption, and quantum transport properties of phosphorene nanoribbon APNR in the presence of different nitroaromatic compounds NACs using the state-of-the-art first principle density functional theory DFT calculations. Our results reveal that the adsorption of explosive molecules is far from the APNR surface, which neither affects the structure of the explosive molecule nor the APNR sur…
With photothermal efficiency higher than traditionally used reduced graphene oxide, while simultaneously being water dispersible, we propose biocompatible Molybdenum Nanoribbons - gold Nanoparticles (MoS2 NR-Au NPs) system for synergistically enhanced photo-thermal ablation of cancerous cells (100% fatality) using NIR radiation (808nm), owing to commendable temperature rise above 70oC at a much faster rate.
The transport properties of carriers in semiconducting graphene nanoribbons are studied by comparing the effects of phonon, impurity, and line-edge roughness scattering. It is found that scattering from impurities located at the surface of nanoribbons, and from acoustic phonons are as important as line edge roughness scattering. The relative importance of these scattering mechanisms varies with the temperature, Fermi level location, and the width of the ribbons. Based on the analysis, strategies for improvement of low-field mobility are described.
A theory is developed for interband tunneling in semiconducting carbon nanotube and graphene nanoribbon p-n junction diodes. Characteristic length and energy scales that dictate the tunneling probabilities and currents are evaluated. By comparing the Zener tunneling processes in these structures to traditional group IV and III-V semiconductors, it is proved that for identical bandgaps, carbon based 1D structures have higher tunneling probabilities. The high tunneling current magnitudes for 1D carbon structures suggest the distinct feasibility of high-performance tunneling-based field-effect tr…
We have assessed mechanical bending as a powerful controlling tool for the electronic structure and optical properties of phosphorene nanoribbons. We use state-of-the-art density functional approximations in our work. The overall performance of the recently developed meta-generalized gradient approximation (meta-GGA) mTASK [Phys. Rev. Mater. \textbf{5}, 063803 (2021)] functional establishes the method as a useful alternative to the screened hybrid HSE06 for better band gaps of phosphorene nanoribbons. We present a detailed and novel analysis to interpret the optical absorption of bent phosphor…
We have performed a first-principles study on the deformation effect of the electronic structures of graphite nanoribbon arrays with zigzag edges on both sides, and the edge atoms are terminated with hydrogen atoms. A uniaxial strain is considered to have deformation effect on the graphite nanoribbons. We found that the antiferromagnetic arrangement of the spin polarizing edges of graphite nanoribbon is still more favorable than that with the ferromagnetic arrangement under deformation. We also learned that a tensile strain increases the magnetization of the graphite ribbon while a compressive…
Pristine graphene interacts relatively weakly with Al, which is a specie of importance for novel generations of metal-ion batteries. We employ DFT calculations to explore the possibility of enhancing Al interaction with graphene. We investigate non-doped and N-doped graphene nanoribbons, address the impact of the edge sites, which are always present to some extent in real samples, and N-containing defects on the material's reactivity towards Al. The results are compared to that of pristine graphene. We show that introduction of edges does not affect the energetics of Al adsorption significantl…
Nanoribbons (nanographite ribbons) are carbon systems analogous to carbon nanotubes. We characterize a wide class of nanoribbons by a set of two integers $<p,q>$, and then define the width $w$ in terms of $p$ and $q$. Electronic properties are explored for this class of nanoribbons. Zigzag (armchair) nanoribbons have similar electronic properties to armchair (zigzag) nanotubes. The band gap structure of nanoribbons exhibits a valley structure with stream-like sequences of metallic or almost metallic nanoribbons. These sequences correspond to equi-width curves indexed by $w$. We reveal a peculi…
Graphene nanoribbons are quasi-one-dimensional meterials with finite width. Characterizing a wide class of nanoribbons by edge shape and width, we make a systematic analysis of their electronic properties. The band gap structure of nanoribbons is shown to exhibit a valley structure with stream-like sequences of metallic or almost metallic nanoribbons. Among them, all zigzag nanoribbons are metallic, and armchair nanoribbons are metallic by period of 3. We find that these stream-like sequences correspond to equi-width curves, and that the band gap of chiral and armchair nanoribbons oscillate as…
The atomic structure, stacking sequences and electronic structure of folded graphene nanoribbons (FGNRs) are investigated by first-principles calculations. It reveals that the common configurations of all FGNRs are racket-like structures including a nanotube-like edge and two flat nanoribbons. Interestingly, the two flat nanoribbons can form new stacking styles instead of the most stable AB-stacking sequences for bilayer nanoribbons. The stability of the FGNRs are associated with several factors of initial structures, such as interlayer distance of two nanoribbons, stacking sequences, edge sty…
We study electronic properties of graphene derivatives which have closed edges. They are finite-length graphene nanoribbons and graphene nanodisks. No metallic states are found in finite-length zigzag nanoribbons though all infinite-length zigzag nanoribbons are metallic. We also study hexagonal, parallelogrammic and trigonal nanodisks with zigzag or armchair edges. No metallic states are found in these nanodisks either except trigonal zigzag nanodisks. It is interesting that we can design the degeneracy of the metallic states arbitrarily in trigonal zigzag nanodisks by changing the size.
Graphene nanoribbon (GNR) field-effect transistors (FETs) with widths down to 12 nm have been fabricated by electron beam lithography using a wafer-scale chemical vapor deposition (CVD) process to form the graphene. The GNR FETs show drain-current modulation of approximately 10 at 300 K, increasing to nearly 106 at 4 K. The strong temperature dependence of the minimum current indicates the opening of a bandgap for CVD-grown GNR-FETs. The extracted bandgap is estimated to be around 0.1 eV by differential conductance methods. This work highlights the development of CVD-grown large-area graphene …
The last decade has seen a flurry of studies related to graphene nanoribbons owing to their potential applications in the quantum realm. However, little experimental work has been reported towards nanoribbons of other 2D materials due to the absence of synthesis routes. Here, we propose a universal approach to synthesize high-quality networks of nanoribbons from arbitrary 2D materials while maintaining high crystallinity, sufficient yield, narrow size distribution, and straight-forward device integrability. The wide applicability of this technique is demonstrated by fabricating MoS2, WS2, WSe2…
We analyze the collective mode spectrum of graphene nanoribbons within the random phase approximation. In the undoped case, only metallic armchair nanoribbons support a propagating plasmon mode. Landau damping of this mode is shown to be suppressed through the chirality of the single particle wavefunctions. We argue that undoped zigzag nanoribbons should not support plasmon excitations because of a broad continuum of particle-hole excitations associated with surface states, into which collective modes may decay. Doped nanoribbons have properties similar to those of semiconductor nanowires, inc…
Graphene nanoribbons are widely regarded as promising building blocks for next-generation carbon-based devices. A critical issue to their prospective applications is whether and to what degree their electronic structure can be externally controlled. Here, we combine simple model Hamiltonians with extensive first-principles calculations to investigate the response of armchair graphene nanoribbons to transverse electric fields. Such fields can be achieved either upon laterally gating the nanoribbon or incorporating ambipolar chemical co-dopants along the edges. We reveal that the field induces a…
We investigate theoretically resonant tunneling through double-bended graphene nanoribbon structures, i.e., armchair-edged graphene nanoribbons (AGNRs) in between two semi-infinite zigzag graphene nanoribbon (ZGNR) leads. Our numerical results demonstrate that the resonant tunneling can be tuned dramatically by the Fermi energy and the length and/or widths of the AGNR for both the metallic and semiconductor-like AGNRs. The structure can also be use to control the valley polarization of the tunneling currents and could be useful for potential application in valleytronics devices.
We report the experimental observation of conductance quantization in graphene nanoribbons, where 1D transport subbands are formed due to the lateral quantum confinement. We show that this quantization in graphene nanoribbons can be observed at temperatures as high as 80 K and channel lengths as long as 1.7 $μ$m. The observed quantization is in agreement with that predicted by theoretical calculations.
We present our study on atomic, electronic, magnetic and phonon properties of one dimensional honeycomb structure of molybdenum disulfide (MoS$_2$) using first-principles plane wave method. Calculated phonon frequencies of bare armchair nanoribbon reveal the fourth acoustic branch and indicate the stability. Force constant and in-plane stiffness calculated in the harmonic elastic deformation range signify that the MoS$_2$ nanoribbons are stiff quasi one dimensional structures, but not as strong as graphene and BN nanoribbons. Bare MoS$_2$ armchair nanoribbons are nonmagnetic, direct band gap s…
The universality of $k$-dependent electron-photon and electron-phonon matrix elements is discussed for graphene nanoribbons and carbon nanotubes. An electron undergoes a change in wavevector in the direction of broken translational symmetry, depending on the light polarization direction. We suggest that this phenomenon originates from a microscopic feature of chirality.
Although carbon nanotubes consist of honeycomb carbon, they have never been fabricated from graphene directly. Here, it is shown by quantum molecular-dynamics simulations and classical continuum-elasticity modeling, that graphene nanoribbons can, indeed, be transformed into carbon nanotubes by means of twisting. The chiralities of the tubes thus fabricated can be not only predicted but also externally controlled. This twisting route is an opportunity for nanofabrication, and is easily generalizable to ribbons made of other planar nanomaterials.
Armchair graphene nanoribbons are a highly promising class of semiconductors for all-carbon nanocircuitry. Here, we present a new perspective on their electronic structure from simple model Hamiltonians and $\textit{ab initio}$ calculations. We focus on a specific set of nanoribbons of width $n = 3p+2$, where $n$ is the number of carbon atoms across the nanoribbon axis and $p$ is a positive integer. We demonstrate that the energy-gap opening in these nanoribbons originates from the breaking of a previously unidentified hidden symmetry by long-ranged hopping of $π$-electrons and structural dist…
In contrast to the well recognized transverse-electric-field-induced half-metallicity in zigzag graphene nanoribbons, here we demonstrate by first-principles calculations that zigzag graphene nanoribbons sandwiched between hexagonal boron nitride nanoribbons or sheets can be tuned into half-metal simply by a bias voltage or a moderate compressive strain. The half-metallicity is attributed to an enhanced coupling effect of spontaneous polarization and asymmetrical exchange correlation along the ribbon width. The findings should open a viable route for efficient spin-resolved band engineering in…
We study analytically, based on the tight-binding model, the electronic band structure of armchair AA-stacked bilayer graphene nanoribbons (BLGNRs) in several regimes. We apply hard-wall boundary conditions to determine the discretion dominating on the Bloch wavefunctions in the confined direction. First we consider an ideal case, perfect nanoribbons without any edge deformation, and show that their electronic properties are strongly size-dependent. We find that the narrow armchair AA-stacked BLGNRs (similar to single-layer graphene nanoribbons) may be metallic or semiconducting depending on t…
The fabrication of atomically precise structures with designer electronic properties is one of the emerging topics in condensed matter physics. The required level of structural control can either be reached through atomic manipulation using the tip of a scanning tunneling microscope (STM) or by bottom-up chemical synthesis. In this review, we focus on recent progress in constructing novel, atomically precise artificial materials: artificial lattices built through atom manipulation and graphene nanoribbons (GNRs) realized by on-surface synthesis. We summarize the required theoretical background…
Graphene nanoribbons with perfect edges are predicted to exhibit interesting electronic and spintronic properties, notably quantum-confined bandgaps and magnetic edge states. However, graphene nanoribbons produced by lithography have, to date, exhibited rough edges and low-temperature transport characteristics dominated by defects, mainly variable range hopping between localized states in a transport gap near the Dirac point. Here, we report that one- and two-layer nanoribbons quantum dots made by unzipping carbon nanotubes10 exhibit well-defined quantum transport phenomena, including Coulomb …
A simple one-stage solution-based method was developed to produce graphene nanoribbons by sonicating graphite powder in organic solutions with polymer surfactant. The graphene nanoribbons were deposited on silicon substrate, and characterized by Raman spectroscopy and atomic force microscopy. Single-layer and few-layer graphene nanoribbons with a width ranging from sub-10 nm to tens of nm and length ranging from hundreds of nm to 1 μm were routinely observed. Electrical transport properties of individual graphene nanoribbons were measured in both the back-gate and polymer-electrolyte top-gate …
We derive analytical expressions for the Young's modulus and the Poisson's ratio of the graphene nanoribbon, in which free edges are warped by the compressive edge stress. Our analytical formulas explicitly illustrate the reduction of the Young's modulus by the warped free edges, leading to the obvious width dependence for the Young's modulus of the graphene nanoribbon. The Poisson's ratio is also reduced by the warped free edges, and negative Poisson's ratio can be achieved in the graphene nanoribbon with an ultra-narrow width. These results are comparable with previous theoretical works.
A theoretical study of the transport properties of zigzag and armchair graphene nanoribbons with a magnetic barrier on top is presented. The magnetic barrier modifies the energy spectrum of the nanoribbons locally, which results in an energy shift of the conductance steps towards higher energies. The magnetic barrier also induces Fabry-Perot type oscillations, provided the edges of the barrier are sufficiently sharp. The lowest propagating state present in zigzag and metallic armchair nanoribbons prevent confinement of the charge carriers by the magnetic barrier. Disordered edges in nanoribbon…
Quasi one-dimensional nanoribbons are excellent candidates for nanoelectronics, therefore here we investigate by means of density functional theory the structure and electronic properties of a new kind of 1D ribbons, namely: centered honeycomb NiSe2 nanoribbons. Depending on the crystallography and atomic composition of the edges, these ribbons can belong to one of six (two) zigzag (armchair) families. In the zigzag families, after edge reconstruction, all the bare ribbons are metallic. The influence of edge hydrogen passivation produces band gaps in two of the six families. For the armchair n…
We analyze the relevance of finite-size effects to the electronic structure of long graphene nanoribbons using a divide and conquer density functional approach. We find that for hydrogen terminated graphene nanoribbons most of the physical features appearing in the density of states of an infinite graphene nanoribbon are recovered at a length of 40 nm. Nevertheless, even for the longest systems considered (72 nm long) pronounced edge effects appear in the vicinity of the Fermi energy. The weight of these edge states scales inversely with the length of the ribbon and they are expected to become…
The Dirac electrons of graphene, an intrinsic zero gap semiconductor, uniquely carry spin and pseudospin that give rise to many fascinating electronic and transport properties. While isolated zigzag graphene nanoribbons are antiferromagnetic semiconductors, we show by means of first-principles and tight-binding calculations that zigzag graphene nanoribbons supported on graphene are half-metallic as a result of spin- and pseudospin-symmetry breaking. In particular, half-metallic Dirac cones are formed at K (K') near the Fermi level. The present results demonstrate that the unique combination of…
We present a first-principles study of bare and hydrogen passivated armchair nanoribbons of the puckered single layer honeycomb structures of silicon and germanium. Our study includes optimization of atomic structure, stability analysis based on the calculation of phonon dispersions, electronic structure and the variation of band gap with the width of the ribbon. The band gaps of silicon and germanium nanoribbons exhibit family behavior similar to those of graphene nanoribbons. The edges of bare nanoribbons are sharply reconstructed, which can be eliminated by the hydrogen termination of dangl…
We report a first-principles based study of mesoscopic quantum transport in chemically doped graphene nanoribbons with a width up to 10 nm. The occurrence of quasibound states related to boron impurities results in mobility gaps as large as 1 eV, driven by strong electron-hole asymmetrical backscattering phenomena. This phenomenon opens new ways to overcome current limitations of graphene-based devices through the fabrication of chemically-doped graphene nanoribbons with sizes within the reach of conventional lithography.
We study the electronic correlation effects in armchair nanoribbon and nanotube using weak-coupling approach and non-Abelian density-matrix renormalization-group method. We show that upon appropriate doping, the system exhibits a new type of flat-band ferromagnetism, different from the well-known Milke-Tasaki one. The strongly correlated ground state consists of intrinsic magnetic moments of flat-band states and itinerant carriers of dispersive bands, and the exchange coupling between them yields a ferromagnetism. The resultant ferromagnetic state with metallic conductivity has a potential in …
Using a tight binding model, we theoretically study the electronic properties of zigzag boron-carbon-nitride (BCN) nanoribbons where the outermost C atoms of zigzag graphene nanoribbons are replaced with B and N atoms. We show that the flat bands and edge states appear at the Fermi level when the number of B and N atoms are equal except the case of six times supercell. To investigate the origin of the edge states in BCN nanoribbons, we consider the semi-infinite graphene sheet with zigzag edge where outermost C atoms are replaced with B and N atoms. We analytically demonstrate the presence of …
Using a continuum Dirac theory, we study the density and spin response of zigzag edge terminated graphene ribbons subjected to edge potentials and Zeeman fields. Our analytical calculations of the density and spin responses of the closed system (fixed particle number) to the static edge fields, show a highly nonlinear Weber-Fechner type behavior where the response depends logarithmically on the edge potential. The dependence of the response on the size of the system (e.g. width of a nanoribbon) is also uncovered. Zigzag edge graphene nanoribbons, therefore, provide a realization of response of…
We investigate electron and phonon transport through edge disordered zigzag graphene nanoribbons based on the same methodological tool of nonequilibrium Green functions. We show that edge disorder dramatically reduces phonon thermal transport while being only weakly detrimental to electronic conduction. The behavior of the electronic and phononic elastic mean free paths points to the possibility of realizing an electron-crystal coexisting with a phonon-glass. The calculated thermoelectric figure of merit (ZT) values qualify zigzag graphene nanoribbons as a very promising material for thermoele…
