The role of exchange-correlation effects in non-equilibrium quantum transport through molecular junctions is assessed by analyzing the IV curve of a generic two-level model using self-consistent many-body perturbation theory (second Born and GW approximations) on the Keldysh contour. For weak molecule-lead coupling we identify a mechanism which can lead to anomalously strong peaks in the dI/dV due to a bias-induced interplay between the position of the HOMO and LUMO levels. The effect is suppressed by self-interaction errors and is therefore unlikely to be observed in standard transport calculations based on density functional theory. Inclusion of dynamic correlations lead to substantial renormalization of the energy levels. In particular, we find a strong enhancement of quasi-particle (QP) scattering at finite bias which reduces the QP lifetimes significantly with a large impact on the IV curve.
Current-induced switching is considered in a magnetic junction. The junction includes pinned and free ferromagnetic layers which work in the regime of the high spin injection. It is shown that in such a regime the exchange magnetization reversal threshold can be lowered up to two times when the axes of the layers are noncollinear.
We study the combined effects of spin transfer torque, voltage modulation of interlayer exchange coupling and magnetic anisotropy on the switching behavior of perpendicular magnetic tunnel junctions (p-MTJs). In asymmetric p-MTJs, a linear-in-voltage dependence of interlayer exchange coupling enables the effective perpendicular anisotropy barrier to be lowered for both voltage polarities. This mechanism is shown to reduce the critical switching current and effective activation energy. Finally, we analyze the possibility of having switching via interlayer exchange coupling only.
The exchange bias effect is commonly used to shift the coercive field of a ferromagnet. This technique is crucial for the use of magnetic tunnel junctions as logic or memory devices. Therefore, an independent switching of the two ferromagnetic electrodes is necessary to guarantee a reliable readout. Here, we demonstrate that the intrinsic exchange bias effect of Ni-Mn-Sn can be used to apply a unidirectional anisotropy to magnetic tunnel junctions. For this, we use epitaxial Ni-Mn-Sn films as pinning layers for microfabricated CoFeB/MgO/CoFeB magnetic tunnel junctions. We compare the exchange …
A generalized Green's function theory is developed to simulate the inelastic electron tunneling spectroscopy (IETS) of molecular junctions. It has been applied to a realistic molecular junction with an octanedithiolate embedded between two gold contacts in combination with the hybrid density functional theory calculations. The calculated spectra are in excellent agreement with recent experimental results. Strong temperature dependence of the experimental IETS spectra is also reproduced. It is shown that the IETS is extremely sensitive to the intra-molecular conformation and to the molecule-met…
We compare theoretical techniques utilized for description of optical response in molecular junctions, and their application to simulate Raman spectroscopy in such systems. Strong and weak sides of the Hilbert vs. Liouville space, as well as quasiparticles vs. many-body states, formulations are discussed. Common origins of the methodologies and different approximations utilized in different formulations are identified.
We propose a scheme for calculation of linear optical response of current-carrying molecular junctions for the case when electronic tunneling through the junction is much faster than characteristic time of external laser field. We discuss relationships between nonequilibrium Green function (NEGF) and time-dependent density functional theory (TDDFT) approaches, and derive expressions for optical response and linear polarizability within NEGF-TDDFT scheme. Corresponding results for isolated molecule, derived within TDDFT approach previously, are reproduced when coupling to contacts is neglected.
A polaron model proposed as a possible mechanism for nonlinear conductance [Galperin M, Ratner M A, and Nitzan A 2005 Nano Lett. 5 125-30] is revisited with focus on the differences between the weak and strong molecule-lead coupling cases. Within the one-molecular level model we present an approximate expression for the electronic Green function corresponding to inelastic transport case, which in the appropriate limits reduces to expressions presented previously for the isolated molecule and for molecular junction coupled to a slow vibration (static limit). The relevance of considerations base…
We present measurements of magnetic tunnel junctions made using a self-assembled-monolayer molecular barrier. Ni/octanethiol/Ni samples were fabricated in a nanopore geometry. The devices exhibit significant changes in resistance as the angle between the magnetic moments in the two electrodes is varied, demonstrating that low-energy electrons can traverse the molecular barrier while maintaining spin coherence. An analysis of the voltage and temperature dependence of the data suggests that the spin-coherent transport signals can be degraded by localized states in the molecular barriers.
This paper reports our Monte Carlo (MC) studies aiming to explain the experimentally observed paramagnetic molecule induced antiferromagnetic coupling between the ferromagnetic (FM) electrodes. Recently developed magnetic tunnel junction based molecular spintronics devices (MTJMSDs), which were prepared by chemically bonding the paramagnetic molecules between the FM electrodes along the exposed side edges of magnetic tunnel junctions, exhibited molecule induced strong antiferromagnetic coupling. Our MC studies focused on the atomic model analogous to the MTJMSD and studied the effect of molecu…
We present a theoretical study of the transport characteristics of molecular junctions, where first-row diatomic molecules are attached to (001) gold and platinum electrodes. We find that the conductance of all of these junctions is of the order of the conductance quantum unit $G_0$, spelling out that they belong to the transparent regime. We further find that the transmission coefficients show wide plateaus as a function of the energy, instead of the usual sharp resonances that signal the molecular levels in the tunneling regime. We use Caroli's model to show that this is a rather generic pro…
We study heat conduction in (n, 0)/(2n, 0) intramolecular junctions by using molecular dynamics method. It is found that the heat conduction is asymmetric, namely, heat transports preferably in one direction. This phenomenon is also called thermal rectification. The rectification is weakly dependent on the detailed structure of connection part, but is strongly dependent on the temperature gradient. We also study the effect of the tube radius and intramolecular junction length on the rectification. Our study shows that the tensile stress can increase rectification. The physical mechanism of the…
Devices made of few molecules constitute the miniaturization limit that both inorganic and organic-based electronics aspire to reach. However, integration of millions of molecular junctions with less than 100 molecules each has been a long technological challenge requiring well controlled nanometric electrodes. Here we report molecular junctions fabricated on a large array of sub-10 nm single crystal Au nanodots electrodes, a new approach that allows us to measure the conductance of up to a million of junctions in a single conducting Atomic Force Microscope (C-AFM) image. We observe two peaks …
Graphene nano-ribbons junctions based electronic devices are proposed in this Letter. Non-equilibrium Green function calculations show that nano-ribbon junctions tailored from single layer graphene with different edge shape and width can act as metal-semiconductor junctions and quantum dots can be implemented. In virtue of the possibilities of patterning monolayer graphene down to atomic precision, these structures, quite different from the previously reported two-dimensional bulk graphene or carbon nanotube devices, are expected to be used as the building blocks of the future nano-electronics…
Despite the uniquely high thermal conductivity of graphene is well known, the exploitation of graphene into thermally conductive nanomaterials and devices is limited by the inefficiency of thermal contacts between the individual nanosheets. A fascinating yet experimentally challenging route to enhance thermal conductance at contacts between graphene nanosheets is through molecular junctions, allowing covalently connecting nanosheets otherwise interacting only via weak Van der Waals forces. Beside the bare existence of covalent connections, the choice of molecular structures to be used as therm…
The conductance of a molecular junction is commonly determined by either charge-transfer-doping, where alignment of the Fermi energy to the molecular levels is achieved, or tunnelling through the tails of molecular resonances within the highest-occupied and lowest-unoccupied molecular-orbital gap. Here, we present an alternative mechanism where electron transport is dominated by electrode surface states. They give rise to metallization of the molecular bridge and additional, pronounced conductance resonances allowing for substantial tailoring of its electronic properties via, e.g. a gate volta…
Understanding electron transport processes in molecular wires connected between contacts is a central focus in the field of molecular electronics. Especially, the dephasing effect causing tunneling-to-hopping transition has great importance from both applicational and fundamental points of view. We analyzed coherent and incoherent electron transmission through conjugated molecular wires by means of density-functional tight-binding theory within the D'Amato-Pastawski model. Our approach can study explicitly the structure/transport relationship in molecular junctions in a dephasing environmental…
In this work we consider a current carrying molecular junction with both electron-phonon and electron-electron interactions taken into account. After performing Lang-Firsov transformation and considering Markov approximations in accordance to weak coupling to the electronic leads, we obtain the master equation governing the time evolution of the reduced density matrix of the junction. The steady state of the density matrix can be used to obtain I-V characteristic of the junction in several regimes of strengths of the interactions. Our results indicate that the system can show negative differen…
We investigate transport properties of molecular junctions under two types of bias--a short time pulse or an AC bias--by combining a solution for the Green functions in the time domain with electronic structure information coming from ab initio density functional calculations. We find that the short time response depends on lead structure, bias voltage, and barrier heights both at the molecule-lead contacts and within molecules. Under a low frequency AC bias, the electron flow either tracks or leads the bias signal (capacitive or resistive response) depending on whether the junction is perfect…
We report resistance versus magnetic field measurements for a La0.65Sr0.35MnO3/SrTiO3/La0.65Sr0.35MnO3 tunnel junction grown by molecular-beam epitaxy, that show a large field window of extremely high tunneling magnetoresistance (TMR) at low temperature. Scanning the in-plane applied field orientation through 360^/circ, the TMR shows 4-fold symmetry, i.e. biaxial anisotropy, aligned with the crystalline axes but not the junction geometrical long axis. The TMR reaches ~ 1900% at 4K, corresponding to an interfacial spin polarization of > 95% assuming identical interfaces. These results show that…
We report theoretical investigations on the role of interfacial bonding mechanism and its resulting structures to quantum transport in molecular wires. Two bonding mechanisms for the Au-S bond in an Au(111)/1,4-benzenedithiol(BDT)/Au(111) junction were identified by ab initio calculation, confirmed by a recent experiment, which, we showed, critically control charge conduction. It was found, for Au/ BDT/Au junctions, the hydrogen atom, bound by a dative bond to the Sulfur, is energetically non-dissociative after the interface formation. The calculated conductance and junction breakdown forces o…
We demonstrate the reversible in situ photoreduction of molecular junctions of phosphomolybdate [PMo12O40]3- monolayer self-assembled on flat gold electrodes, connected by the tip of a conductive atomic force microscope. The conductance of the one electron reduced [PMo12O40]4- molecular junction is increased by ca. 10, this open-shell state is stable in the junction in air at room temperature. The analysis of a large current-voltage dataset by unsupervised machine learning and clustering algorithms reveals that the electron transport in the pristine phosphomolybdate junctions leads to symmetri…
We assess the performances of the transition voltage spectroscopy (TVS) method to determine the energies of the molecular orbitals involved in the electronic transport though molecular junctions. A large number of various molecular junctions made with alkyl chains but with different chemical structure of the electrode-molecule interfaces are studied. In the case of molecular junctions with clean, unoxidized electrode-molecule interfaces, i.e. alkylthiols and alkenes directly grafted on Au and hydrogenated Si, respectively, we measure transition voltages in the range 0.9 - 1.4 V. We conclude th…
Using an updated simulation tool, we examine molecular junctions comprised of benzene-1,4-dithiolate bonded between gold nanotips, focusing on the importance of environmental factors and inter-electrode distance on the formation and structure of bridged molecules. We investigate the complex relationship between monolayer density and tip separation, finding that the formation of multi-molecule junctions is favored at low monolayer density, while single-molecule junctions are favored at high density. We demonstrate that tip geometry and monolayer interactions, two factors that are often neglecte…
We consider a biased molecular junction subjected to external time-dependent electromagnetic field. We discuss local field formation due to both surface plasmon-polariton excitations in the contacts and the molecular response. Employing realistic parameters we demonstrate that such self-consistent treatment is crucial for proper description of the junction transport characteristics.
This is a preliminary acount of a theory for Raman scattering by current-carrying molecular junctions. The approach combines a non-equilibrium Green's function (NEGF) description of the non-equilibrium junction with a generalized scattering theory formulation for evaluating the light scattering signal. This generalizes our previous study (Phys. Rev. Lett. 95, 206802 (2005); J. Chem. Phys. 124, 234709 (2006)) of junction spectroscopy by including molecular vibrations and developing machinery for calculation of state-to-state (Raman scattering) fluxes within the NEGF formalism. For large enough …
The conductance of single molecule junctions is calculated using a Landauer approach combined to many-body perturbation theory MBPT) to account for electron correlation. The mere correction of the density-functional theory eigenvalues, which is the standard procedure for quasiparticle calculations within MBPT, is found not to affect noticeably the zero-bias conductance. To reduce it and so improve the agreement with the experiments, the wavefunctions also need to be updated by including the non-diagonal elements of the self-energy operator.
We study electron transport through single-molecule junctions formed by an octanethiol molecule bonded with the thiol anchoring group to a gold electrode and the opposing methyl endgroup to a carbon tip. Using the scanning tunneling microscope based break junction technique, we measure the electrical conductance of such molecular junctions. We observe the presence of well-defined conductance plateaus during the stretching of the molecular bridge, which is the signature of the formation of a molecular junction.
The influence of molecular vibration on the Seebeck coefficient is studied within a simple model. Results of a scattering theory approach are compared to those of a full self-consistent non-equilibrium Green's function scheme. We show, for a reasonable choice of parameters, that inelastic effects have non-negligible influence on the resulting Seebeck coefficient for the junction. We note that the scattering theory approach may fail both quantitatively and qualitatively. Results of calculation with reasonable parameters are in good agreement with recent measurements [P. Reddy et al., Science 31…
Negative differential resistance (NDR) is tuned at junctions of electronically different dimer and trimer of Rose Bengal on an atomic flat gold (111) surface. Isolated molecule did not show any NDR. But it was induced to show double NDR with large peak to valley ratio (1.8~3.1) in room temperature via charging its neighbor reproducibly by an electrical pulse. In some sections of junction by applying pulse one could destroy the phenomenon or regenerate it by STM manipulation of molecules. NDR was also independent of polaronic nature. It was possible to write bits 1 and 0 for cationic NDR (in di…
Amine terminated molecules show well behaved conductance in the scanning tunneling microscope break-junction experimental measurements. We performed density functional theory based electron transport calculations to explain the nature of this phenomenon. We find that amines can be adsorbed only on apex Au atom, while thiolate group can be attached equally well to undercoordinated and clean Au surfaces. Our calculations show that only one adsorption geo metry is sterically and energetically possible for amine anchored junction whereas three different adsorption geometries with very distinct tra…
Using self-energy-corrected density functional theory (DFT) and a coherent scattering-state approach, we explain current-voltage (IV) measurements of four pyridine-Au and amine-Au linked molecular junctions with quantitative accuracy. Parameter-free many-electron self-energy corrections to DFT Kohn-Sham eigenvalues are demonstrated to lead to excellent agreement with experiments at finite bias, improving upon order-of-magnitude errors in currents obtained with standard DFT approaches. We further propose an approximate route for prediction of quantitative IV characteristics for both symmetric a…
Influence of interfaces on thiol-terminated molecular wires consisting of three phenyl (P3) or three thiophene (T3) rings was monitored by a new statistical approach based on mechanical controllable break junction technique (see SEM image of the junction and schematic of molecular arrangement). The P3 molecule exhibits stochastic variations in conductance G, in contrast to the T3 molecule.
We consider the radiation of angular momentum (AM) from current-carrying molecular junctions. Using the nonequilibrium Green's function method, we derive a convenient formula for the AM radiation and apply it to a prototypical benzene molecule junction. We discuss the selection rules for inelastic transitions between the molecular angular momentum eigenstates due to a 6-fold rotational symmetry. Our study provides important insights into the generation of light with AM from DC-biased molecular junctions.
Thermal conductance of single molecular junctions at room temperature has been measured recently using picowatt-resolution scanning probes. However, fully understanding thermal transport in a much wider temperature range is needed for the exploration of energy transfer at single-molecular limit and the development of single-molecular devices. Here, employing a semiclassical Langevin molecular dynamics method, a comparative study is performed on the thermal transport of an alkane chain between Au and graphene electrodes, respectively. We illustrate the different roles of quantum statistics and …
We discuss theoretical approaches to nonlinear optical spectroscopy of molecular junctions. Optical response functions are derived in the form convenient for implementation of Green function techniques, and their expressions in terms of pseudoparticle nonequilibrium Green functions are proposed. The formulation allows to account for both intra-molecular interactions and hybridization of molecular states due to coupling to contacts. Two-dimensional optical spectroscopy in junctions is considered as an example.
We present a pedagogical review of current density simulation in molecular junction models indicating its advantages and deficiencies in analysis of local junction transport characteristics. In particular, we argue that current density is a universal tool which provides more information than traditionally simulated bond currents, especially when discussing inelastic processes. However, current density simulations are sensitive to choice of basis and electronic structure method. We note that discussing local current conservation in junctions one has to account for source term caused by open cha…
A phase from an adiabatic exchange of Majorana bound states (MBS) reveals their exotic anyonic nature. For detecting this exchange phase, we propose an experimental setup consisting of a Corbino-geometry Josephson junction on the surface of a topological insulator, in which two MBS at zero energy can be created and rotated. We find that if a metallic tip is weakly coupled to a point on the junction, the time-averaged differential conductance of the tip-Majorana coupling shows peaks at the tip voltages $eV = \pm (α- 2πl) \hbar/ T_J$, where $α= π/2$ is the exchange phase of the two circulating M…
We revisit the non-collinear exchange coupling across the trilayer magnetic junction mediated by the diluted-magnetic-semiconductor thin film. By numerical approaches, we investigate the spiral angle between the ferromagnetic layers extensively in the parameter space. In contrast to previous study, we discovered the important role of spin relaxation, which tends to favor spiral exchange over the oscillatory Ruderman-Kittel-Kasuya-Yosida interaction. Finally, we discuss the physics origins of these two types of magnetic interactions.
We report detailed atomistic simulations combined with high-fidelity conductance calculations to probe the structural origins of conductance fluctuations in thermally evolving Au-benzene-1,4-dithiolate-Au junctions. We compare the behavior of structurally ideal junctions (electrodes with flat surfaces) to structurally realistic, experimentally representative junctions resulting from break junction simulations. The enhanced mobility of metal atoms in structurally realistic junctions results in significant changes to the magnitude and origin of the conductance fluctuations. Fluctuations are larg…
We study interlayer exchange interaction in magnetic tunnel junctions with ferroelectric barrier. We focus on the influence of image forces on the voltage dependence of the interlayer magnetic interaction (magneto-electric effect). The influence of the image forces is twofold: 1) they significantly enforce magneto-electric effect occurring due to the surface charges at the interface between ferroelectric and ferromagnets; 2) in combination with voltage dependent dielectric constant of the ferroelectric barrier image forces cause an additional contribution to the magneto-electric effect in magn…
We report on a method to fabricate and measure gateable molecular junctions which are stable at room temperature. The devices are made by depositing molecules inside a few-layer graphene nanogap, formed by feedback controlled electroburning. The gaps have separations on the order of 1-2 nm as estimated from a Simmons model for tunneling. The molecular junctions display gateable IV-characteristics at room temperature.
Perpendicularly magnetized CoFeB layers with ultra-thin non-magnetic insertion layers are very widely used as the electrodes in magnetic tunnel junctions for spin transfer magnetic random access memory devices. Exchange interactions play a critical role in determining the thermal stability of magnetic states in such devices and their spin torque switching efficiency. Here the exchange constant of free layers incorporated in full magnetic tunnel junction layer stacks, specifically CoFeB free layers with W insertion layers is determined by magnetization measurements in a broad temperature range.…
Understanding and controlling heat transport in molecular junctions would provide new routes to design nanoscale coupled electronic and phononic devices. Using first principles full quantum calculations, we tune thermal conductance of a molecular junction by mechanically compressing and extending a short alkane chain connected to graphene leads. We find that the thermal conductance of the compressed junction drops by half in comparison to the extended junction, making it possible to turn on and off the heat current. The low conductance of the off state does not vary by further approaching the …
We investigate within a coarse-grained model the conditions leading to the appearance of Fano resonances or anti-resonances in the conductance spectrum of a generic molecular junction with a side group (T-junction). By introducing a simple graphical representation (parabolic diagram), we can easily visualize the relation between the different electronic parameters determining the regimes where Fano resonances or anti-resonances in the low-energy conductance spectrum can be expected. The results obtained within the coarse-grained model are validated using density-functional based quantum transp…
Estimating the relative alignment between the frontier molecular orbitals that dominates the charge transport through single-molecule junctions represents a challenge for theory. This requires approaches beyond the widely employed framework provided by the density functional theory, wherein the Kohn-Sham "orbitals" are treated as if they were real molecular orbitals, which is not the case. In this paper, we report results obtained by means of quantum chemical calculations, including the EOM-CCSD (equation-of-motion coupled-cluster singles and doubles), which is the state-of-the-art of quantum …
We consider a biased molecular junction subjected to external time-dependent electromagnetic field. The field for two typical junction geometries (bowtie antennas and metal nanospheres) is calculated within finite-difference time-domain technique. Time-dependent transport and optical response of the junctions is calculated within non-equilibrium Green's function approach expressed in a form convenient for description of multi-level systems. We present numerical results for a two-level (HOMO-LUMO) model, and discuss influence of localized surface plasmon polariton modes on transport.
The interaction of metal-molecule-metal junctions with light is considered within a simple generic model. We show, for the first time, that light induced current in unbiased junctions can take place when the bridging molecule is characterized by a strong charge-transfer transition. The same model shows current induced light emission under potential bias that exceeds the molecular excitation energy. Results based on realistic estimates of molecular-lead coupling and molecule-radiation field interaction suggest that both effects should be observable.
Time-dependent currents in molecular junctions can be caused by structural fluctuations or interaction with external fields. In this publication, we demonstrate how the hierarchical quantum master equation approach can be used to study time-dependent transport in a molecular junction. This reduced density matrix methodology provides a numerically exact solution to the transport problem including time-dependent energy levels, molecule-lead coupling strengths and transitions between electronic states of the molecular bridge. Based on a representative model, the influence of a time-dependent mole…
Using first principle approaches, we investigate the effects of isotope substitution on the inelastic features in the hydrogen molecular junction. We observe thatlocal heating and inelastic current have significant isotope-substitution effects. Due to the contact characters, the energies of excited molecular vibrationsare inverse proportional to the square root of the mass. The heavier the molecule, the smaller the onset bias. In the $H_{2}$ and $D_{2}$ junctions, the heavier molecule has a smaller magnitude of electron-vibration interaction. Consequently, there is a crossing in the local temp…
We investigate the non-collinear exchange coupling across the trilayer magnetic junction composed of an intermediate layer with Rashba interaction and two sandwiching ferromagnetic ones. To compute the mediated exchange coupling, one needs to go beyond the single-particle argument and integrate over the contributions from the whole Fermi surface. Surprisingly, we find that the topology of the Fermi surface plays a crucial role in determining whether the oscillatory RKKY or the spiral interactions would dominate. At the end, we discuss the connection of our numerical results to experiments and …
Selective Fermi-Level Pinning: A Design Strategy for Giant Rectification in Molecular Junctions
Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University（液体-固体结构演化与材料加工教育部重点实验室，山东大学）
The interaction between electronic and nuclear degrees of freedom in single-molecule junctions is an essential mechanism, which may result in the current-induced rupture of chemical bonds. As such, it is fundamental for the stability of molecular junctions and for the applicability of molecular electronic devices. In this publication, we study current-induced bond rupture in molecular junctions using a numerically exact scheme, which is based on the hierarchical quantum master equation (HQME) method in combination with a discrete variable representation for the nuclear degrees of freedom. Empl…
Using a model comprising a 2-level bridge connecting free electron reservoirs we show that coupling of a molecular bridge to electron-hole excitations in the leads can markedly effect the source-drain current through a molecular junction.In some cases, e.g. molecules that exhibit strong charge transfer transitions, the contribution from electron-hole excitations can exceed the Landauer elastic current and dominate the observed conduction.
We investigate the thermopower of a metal-molecule-metal junction taking into account thermal effects on the junction. Based on analytical expressions and numerical simulations we show that the thermoelectric potential reveals valuable information on the mechanisms controlling the electron transfer process, including coherent transmission and thermalized hopping. We also show that at high temperatures the position of the Fermi energy relative to the molecular states can be easily deduced from the thermoelectric potential. Standard current-voltage measurements are insensitive to this informatio…
Using self-consistent calculations based on Non-Equilibrium Green's Function (NEGF) formalism, the origin of negative differential resistance (NDR) in molecular junctions and quantum wires is investigated. Coupling of the molecule to electrodes becomes asymmetric at high bias due to asymmetry between its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels. This causes appearance of an asymmetric potential profile due to a depletion of charge and reduction of screening near the source electrode. With increasing bias, this sharp potential drop leads to…
Ab initio calculations of phenyl dithiol connected to Au, Ag, Pd, and Pt electrodes are performed using non-equilibrium Green's functions and density functional theory. For each metal, the properties of the molecular junction are considered both in equilibrium and under bias. In particular, we consider in detail charge transfer, changes in the electrostatic potential, and their subsequent effects on the IV curves through the junctions. Gold is typically used in molecular junctions because it forms strong chemical bonds with sulfur. We find however that Pt and Pd make better electrical contacts…
Redox molecular junctions are molecular conduction junctions that involve more than one oxidation state of the molecular bridge. This property is derived from the ability of the molecule to transiently localize transmitting electrons, implying relatively weak molecule-leads coupling and, in many cases, the validity of the Marcus theory of electron transfer. Here we study the implications of this property on the non-linear transport properties of such junctions. We obtain an analytical solution of the integral equations that describe molecular conduction in the Marcus kinetic regime and use it …
