基于0.13 $μ$ m数字CMOS的6位1.2GSps低功耗Flash ADC
A 6bit, 1.2GSps Low-Power Flash-ADC in 0.13$μ$m Digital CMOS
摘要:
介绍了一种采用标准数字0.13 $μ$ m CMOS工艺实现的6位1.2GSps、宽模拟带宽、低功耗Flash ADC。采用容性内插在设计低功耗时具有多种优势:无需基准电阻阶梯、隐式采样保持操作、内插网络中无边缘效应(与电阻内插相比)以及仅400 fF的极低输入电容,从而形成易于驱动的模拟转换器接口。该ADC在1.2GSps下工作,有效分辨率带宽(ERBW)为700 MHz,功耗为160 mW。在600 MSps时,我们实现了600 MHz的ERBW,功耗仅为90 mW,均采用1.5V电源。这分别对应于2.2和1.5 pJ/convstep的显著品质因数(FoM)。模块面积为0.12mm^2。
英文摘要:
A 6bit flash-ADC with 1.2GSps, wide analog bandwidth and low power, realized in a standard digital 0.13 $μ$m CMOS copper technology is presented. Employing capacitive interpolation gives various advantages when designing for low power: no need for a reference resistor ladder, implicit sample-and-hold operation, no edge effects in the interpolation network (as compared to resistive interpolation), and a very low input capacitance of only 400fF, which leads to an easily drivable analog converter interface. Operating at 1.2GSps the ADC achieves an effective resolution bandwidth (ERBW) of 700MHz, while consuming 160mW of power. At 600MSps we achieve an ERBW of 600MHz with only 90mW power consumption, both from a 1.5V supply. This corresponds to outstanding Figure-of-Merit numbers (FoM) of 2.2 and 1.5pJ/convstep, respectively. The module area is 0.12mm^2.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。