Avalanche photo detection is commonly used in applications which require single photon sensitivity. We examine the limits of using avalanche photo diodes (APD) for characterising photon statistics at high data rates. To identify the regime of linear APD operation we employ a ps-pulsed diode laser with variable repetition rates between 0.5MHz and 80MHz. We modify the mean optical power of the coherent pulses by applying different levels of well-calibrated attenuation. The linearity at high repetition rates is limited by the APD dead time and a non-linear response arises at higher photon-numbers due to multiphoton events. Assuming Poissonian input light statistics we ascertain the effective mean photon-number of the incident light with high accuracy. Time multiplexed detectors (TMD) allow to accomplish photon- number resolution by photon chopping. This detection setup extends the linear response function to higher photon-numbers and statistical methods may be used to compensate for non-linearity. We investigated this effect, compare it to the single APD case and show the validity of the convolution treatment in the TMD data analysis.
A multichannel detector has been constructed using a single avalanche photodiode and a fiber-loop delay line. Detection probabilities of the channels can be set using a variable-ratio coupler. The performance of the detector is demonstrated on its capability to distinguish multi-photon states (containing two or more photons) from the one-photon state and the vacuum state.
We experimentally demonstrate optical control of negative-feedback avalanche diode (NFAD) detectors using bright light. We deterministically generate fake single-photon detections with a better timing precision than normal operation. This could potentially open a security loophole in quantum cryptography systems. We then show how monitoring the photocurrent through the avalanche photodiode can be used to reveal the detector is being blinded.
We demonstrate the use of two high speed avalanche photodiodes in exploring higher order photon correlations. By employing the photon number resolving capability of the photodiodes the response to higher order photon coincidences can be measured. As an example we show experimentally the sensitivity to higher order correlations for three types of photon sources with distinct photon statistics. This higher order correlation technique could be used as a low cost and compact tool for quantifying the degree of correlation of photon sources employed in quantum information science.
We present an InGaAs/InP avalanche photodiode with an active quenching circuit on an ASIC (application specific integrated circuit) that is capable of operating in both gated and free-running modes. The 1.6mm2 ASIC chip is fabricated using CMOS (complementary metal oxide semiconductor) technology guaranteeing long-term stability, reliability and compactness. In the free-running mode we find a single photon detection efficiency of 10% with <2kHz of noise.
Avalanche photodiode based single photon detectors, as crucial and practical components, are widely used in quantum key distribution (QKD) systems. For effective detection, most of these SPDs are operated in the gated mode, in which the gate is added to obtain high avalanche gain, and is removed to quench the avalanche. The avalanche transition region (ATR) is a certain existence in the process of adding and removing the gate. We first experimentally investigate the characteristic of the ATR, including in the commercial SPD and high-speed SPD, and then propose an ATR attack to control the dete…
In this paper we present a novel construction of an active quenching circuit intended for single photon detection. For purpose of evaluation, we have combined this circuit with a standard avalanche photodiode C30902S to form a single photon detector. A series of measurements, presented here, show that this single photon detector has a dead time of less than 40ns, maximum random counting frequency of over 14MHz, low after pulsing, detection efficiency of over 20% and a good noise performance. This simple and robust active quenching circuit can be built from of-the-shelf electronic components an…
A highly sensitive photodetection system with a detection limit of 1 photon/s was developed. This system uses a commercially available 200-mm-diameter silicon avalanche photodiode (APD) and an in-house-developed ultralow-noise readout circuit, which are both cooled to 77 K. When the APD operates at a low gain of about 10, it has a high-linearity response to the number of incident photons and a low excess noise factor. The APD also has high quantum efficiency and a dark current of less than 1 e/s at 77 K. This photodetection system will shorten the measurement time and enable higher spatial and…
We present a practical and easy-to-implement method for high-speed near infrared single-photon detection based on InGaAs/InP single-photon avalanche photodiodes (SPADs), combining aspects of both sine gating and self-differencing techniques. At a gating frequency of 921 MHz and temperature of -30 $^{\circ}$C we achieve: a detection efficiency of 9.3 %, a dark count probability of 2.8$\times10^{-6}$ ns$^{-1}$, while the afterpulse probability is 1.6$\times10^{-4}$ ns$^{-1}$, with a 10 ns "count-off time" setting. In principle, the maximum count rate of the SPAD can approach 100 MHz, which can s…
This paper describes the design, fabrication, and performance of planar-geometry InGaAs-InP devices which were specifically developed for single-photon detection at a wavelength of 1550 nm. General performance issues such as dark count rate, single-photon detection efficiency, afterpulsing, and jitter are described.
Fast gated avalanche photodiodes (APDs) are the most commonly used single photon detectors for high bit rate quantum key distribution (QKD). Their robustness against external attacks is crucial to the overall security of a QKD system or even an entire QKD network. Here, we investigate the behavior of a gigahertz-gated, self-differencing InGaAs APD under strong illumination, a tactic Eve often uses to bring detectors under her control. Our experiment and modelling reveal that the negative feedback by the photocurrent safeguards the detector from being blinded through reducing its avalanche prob…
We report a demonstration of quantum key distribution (QKD) at GHz clock rates with InGaAs avalanche photodiodes (APDs) operating in a self-differencing mode. Such a mode of operation allows detection of extremely weak avalanches so that the detector afterpulse noise is sufficiently suppressed. The system is characterized by a secure bit rate of 2.37 Mbps at 5.6 km and 27.9 kbps at 65.5 km when the fiber dispersion is not compensated. After compensating the fiber dispersion, the QKD distance is extended to 101 km, resulting in a secure key rate of 2.88 kbps. Our results suggest that InGaAs APD…
Spatial correlations between two photons are the key resource in realising many quantum imaging schemes. Measurement of the bi-photon correlation map is typically performed using single-point scanning detectors or single-photon cameras based on CCD technology. However, both approaches are limited in speed due to the slow scanning and the low frame-rate of CCD-based cameras, resulting in data acquisition times on the order of many hours. Here we employ a high frame rate, single photon avalanche diode (SPAD) camera, to measure the spatial joint probability distribution of a bi-photon state produ…
We propose and demonstrate a scheme to realize a high-efficiency truly quantum random number generator (RNG) at room temperature (RT). Using an effective extractor with simple time bin encoding method, the avalanche pulses of avalanche photodiode (APD) are converted into high-quality random numbers (RNs) that are robust to slow varying noise such as fluctuations of pulse intensity and temperature. A light source is compatible but not necessary in this scheme. Therefor the robustness of the system is effective enhanced. The random bits generation rate of this proof-of-principle system is 0.69 M…
Photon avalanche triggered by a single photon in a bistable nonlinear optical cavity
Universite Grenoble Alpes, CNRS, LPMMC（格勒诺布尔阿尔卑斯大学，法国国家科学研究中心，微观与分子物理研究所）；Pitaevskii BEC Center, CNR-INO and Dipartimento di Fisica, Universita di Trento（皮塔耶夫斯基玻色-爱因斯坦凝聚中心，意大利国家研究委员会红外光学研究所及特伦托大学物理系）；MajuLab, CNRS-UCA-SU-NUS-NTU International Joint Research Unit（迈朱实验室，法国国家科学研究中心-南法大学-新加坡国立大学-南洋理工大学国际联合研究单位）
We report a 2 GHz operation of InGaAs avalanche photodiodes for efficient single photon detection at telecom wavelengths. Employing a self-differencing circuit that incorporates tuneability in both frequency and arm balancing, extremely weak avalanches can now be sensed so as to suppress afterpulsing. The afterpulse probability is characterized as 4.84% and 1.42% for a photon detection efficiency of 23.5% and 11.8%, respectively. The device will further increase the secure bit rate for fiber wavelength quantum key distribution.
We report an automated characterization of a single-photon detector based on commercial silicon avalanche photodiode (PerkinElmer C30902SH). The photodiode is characterized by I-V curves at different illumination levels (darkness, 10 pW and 10 uW), dark count rate and photon detection efficiency at different bias voltages. The automated characterization routine is implemented in C++ running on a Linux computer.
Implementation of high-speed quantum key distribution~(QKD) has become one of the major focus in the field, which produces high key-generation rate for applications. To achieve high-speed QKD, tailored techniques are developed and employed to quickly generate and detect quantum states. However, these techniques may introduce unique loopholes to compromise the security of QKD systems. In this paper, we investigate the loopholes of self-differencing~(SD) avalanche photodiode~(APD) detector, typically used for high-speed detection in a QKD system, and demonstrate experimental testing of SD APD de…
Single-shot high-resolution spectroscopy of single-photon-level optical pulses using a virtually imaged phased-array and single-photon avalanche diode array
We implement an InGaAs/InP single-photon avalanche diode (SPAD) for single-photon detection with the fastest gating frequency reported so far, of 2.23 GHz, which approaches the limit given by the bandwidth of the SPAD - 2.5 GHz. We propose a useful way to characterize the afterpulsing distribution for rapid gating that allows for easy comparison with conventional gating regimes. We compare the performance of this rapid gating scheme with free-running detector and superconducting single-photon detector (SSPD) for the coherent one-way quantum key distribution (QKD) protocol. The rapid gating sys…
We demonstrate an efficient photon number detector for visible wavelengths using a silicon avalanche photodiode. Under subnanosecond gating, the device is able to resolve up to four photons in an incident optical pulse. The detection efficiency at 600 nm is measured to be 73.8%, corresponding to an avalanche probability of 91.1% of the absorbed photons, with a dark count probability below 1.1x10^{-6} per gate. With this performance and operation close to room temperature, fast-gated silicon avalanche photodiodes are ideal for optical quantum information processing that requires single-shot pho…
We report operation and characterization of a lab-assembled single-photon detector based on commercial silicon avalanche photodiodes (PerkinElmer C30902SH, C30921SH). Dark count rate as low as 5 Hz was achieved by cooling the photodiodes down to -80 C. While afterpulsing increased as the photodiode temperature was decreased, total afterpulse probability did not become significant due to detector's relatively long deadtime in a passively-quenched scheme. We measured photon detection efficiency higher than 50% at 806 nm.
In this work we investigate operation in the Geiger mode of the new single photon avalanche photo diode (SPAD) SAP500 manufactured by Laser Components. This SPAD is sensitive in the range 400-1000nm and has a conventional reach-through structure which ensures good quantum efficiency at the long end of the spectrum. By use of passive and active quenching schemes we investigate detection efficiency, timing jitter, dark counts, afterpulsing, gain and other important parameters and compare them to the "standard" low noise SPAD C30902SH from Perkin Elmer. We conclude that SAP500 offers better combi…
Afterpulsing noise in InGaAs/InP single photon avalanche photodiodes (APDs) is caused by carrier trapping and can be suppressed successfully through limiting the avalanche charge via sub-nanosecond gating. Detection of faint avalanches requires an electronic circuit that is able to effectively remove the gate-induced capacitive response while keeping photon signals intact. Here we demonstrate a novel ultra-narrowband interference circuit (UNIC) that can reject the capacitive response by up to 80 dB per stage with little distortion to avalanche signals. Cascading two UNIC's in a readout circuit…
Avalanche photodiodes are widely used as practical detectors of single photons.1 Although conventional devices respond to one or more photons, they cannot resolve the number in the incident pulse or short time interval. However, such photon number resolving detectors are urgently needed for applications in quantum computing,2-4 communications5 and interferometry,6 as well as for extending the applicability of quantum detection generally. Here we show that, contrary to current belief,3,4 avalanche photodiodes are capable of detecting photon number, using a technique to measure very weak avalanc…
Afterpulsing is one of the main technological flaws present in photon counting detectors based on solid-state semiconductor avalanche photodiodes operated in Geiger mode. Level of afterpulsing depends mainly on type of the semiconductor, doping concentrations and temperature and presents an additional source of noise, along with dark counts. Unlike dark counts which appear randomly in time, aterpulses and are time-correlated with the previous detections. For measurements that rely on timing information afterpulsing can create fake signals and diminish the sensitivity. In this work we test a no…
Quantum key distribution (QKD) at telecom wavelengths (1260-1625nm) has the potential for fast deployment due to existing optical fibre infrastructure and mature telecom technologies. At these wavelengths, indium gallium arsenide (InGaAs) avalanche photodiode (APD) based detectors are the preferred choice for photon detection. Similar to their silicon counterparts used at shorter wavelengths, they exhibit fluorescence from recombination of electron-hole pairs generated in the avalanche breakdown process. This fluorescence may open side channels for attacks on QKD systems. Here, we characterize…
We report a 1.036 GHz gated Geiger mode InGaAs avalanche photodiode with a detection dead time of just 1.93 ns. This is demonstrated by full recovery of the detection efficiency two gate cycles after a detection event, as well as a measured maximum detection rate of 497 MHz. As an application, we measure the second order correlation function $g^{(2)}$ of the emission from a diode laser with a single detector which works reliably at high speed owing to the extremely short dead time of the detector. The device is ideal for high bit rate fiber wavelength quantum key distribution and photonic quan…
We have performed a detailed study of the dependence of afterpulse probability in InGaAs/InP sine-gated SPAD on the dead time and the existing approach for its implementation. We demonstrated an electrical scheme combining sinusoidal gating and active reset. We have shown when such solutions are beneficial from the key distribution point of view and enough to use a simple scheme with a snatching comparator. We have also proposed a precise method for measuring the afterpulse and presented a model describing the non-markovian dynamic of this effect. We have demonstrated that our afterpulsing mea…
Superconducting nanowire avalanche single-photon detectors (SNAPs) with n parallel nanowires are advantageous over single-nanowire detectors because their output signal amplitude scales linearly with n. However, the SNAP architecture has not been viably demonstrated for n > 4. To increase n for larger signal amplification, we designed a multi-stage, successive-avalanche architecture which used nanowires, connected via choke inductors in a binary-tree layout. We demonstrated an avalanche detector with n = 8 parallel nanowires and achieved eight-fold signal amplification, with a timing jitter of…
Here we report and discuss the avalanche-like up-conversion behavior in absence of the avalanche. We experimentally observed significant changes in the slope of the curve for the intensity dependence of up-conversion luminescence of erbium ions in green band on the pump intensity of the diode laser. Such changes are typical for the photon avalanche. However, the concentration of erbium ions is insufficient for an efficient exchange of energy between them, and excitation of a photon avalanche is not possible. Using a simple three-level approximation of the up-conversion process model, we have s…
Single-photon-avalanche diode (SPAD) arrays are essential tools in biophotonics, optical ranging and sensing and quantum optics. However, their small number of pixels, low quantum efficiency and small fill factor have so far hindered their use for practical imaging applications. Here, we demonstrate full-field entangled photon pair correlation imaging using a 100-kpixels SPAD camera. By measuring photon coincidences between more than 500 million pairs of positions, we retrieve the full point spread function of the imaging system and subsequently high-resolution images of target objects illumin…
We investigate the feasibility and performance of photon-number-resolved photodetection employing single-photon avalanche photodiodes (SPADs) with low dark counts. While the main idea, to split $n$ photons into $m$ detection modes with no more than one photon per mode, is not new, we investigate here a important variant of this situation where SPADs are side-coupled to the same waveguide rather than terminally coupled to a propagation tree. This prevents the nonideal SPAD quantum efficiency from contributing to photon loss. We propose a concrete SPAD segmented waveguide detector based on verti…
Temporal photon correlation measurement, instrumental to probing the quantum properties of light, typically requires multiple single photon detectors. Progress in single photon avalanche diode (SPAD) array technology highlights their potential as high performance detector arrays for quantum imaging and photon number resolving (PNR) experiments. Here, we demonstrate this potential by incorporating a novel on-chip SPAD array with 55% peak photon detection probability, low dark count rate and crosstalk probability of 0.14% per detection, in a confocal microscope. This enables reliable measurement…
Single-photon detectors are a pivotal component in photonic quantum technologies. A precise and comprehensive calibration of the intrinsic detection efficiency is of utmost importance to ensure the proper evaluation of the performance in view of the specific technological application of interest, such as the protection against security breaches in quantum cryptographic solutions. Here we report on a systematic study on and comprehensive analysis of the estimation of the intrinsic detection efficiency of two commercial single-photon detectors based on single-photon avalanche diodes (SPADs) for …
Avalanche photodiodes (APDs) are a practical option for space-based quantum communications requiring single-photon detection. However, radiation damage to APDs significantly increases their dark count rates and reduces their useful lifetimes in orbit. We show that high-power laser annealing of irradiated APDs of three different models (Excelitas C30902SH, Excelitas SLiK, and Laser Components SAP500S2) heals the radiation damage and substantially restores low dark count rates. Of nine samples, the maximum dark count rate reduction factor varies between 5.3 and 758 when operating at minus 80 deg…
We present a stable and high-performance fiber-coupled NbTiN superconducting nanowire avalanche photon detector (SNAP). We demonstrate afterpulse-free operation in serially connected two SNAPs (SC-2SNAP), even in the absence of a choke inductor, achieving a 7.7 times faster response speed than standard SSPDs. The SC-2SNAP device showed a system detection efficiency (SDE) of 81.0% with wide bias current margin, a dark count rate of 6.8 counts/s, and full width at half maximum timing jitter of 68 ps, operating at 2.3 K.
Integrated technologies greatly enhance the prospects for practical quantum information processing and sensing devices based on trapped ions. High-speed and high-fidelity ion state readout is critical for any such application. Integrated detectors offer significant advantages for system portability and can also greatly facilitate parallel operations if a separate detector can be incorporated at each ion-trapping location. Here we demonstrate ion quantum state detection at room temperature utilizing single-photon avalanche diodes (SPADs) integrated directly into the substrate of silicon ion tra…
We characterize a new commercial, back-illuminated reach-through silicon single-photon avalanche photo diode (SPAD) SAP500 (Laser Components. Inc.), operated in Geiger-mode for purpose of photon counting. We show that for this sensor a significant interplay exists between dark counts, detection efficiency, afterpulsing, excess voltage and operating temperature, sometimes requiring a careful optimization tailored for a specific application. We find that a large flat plateau of sensitive area of about 0.5 mm in diameter, a peak quantum efficiency of 73% at 560 nm and timing precision down to 150…
InGaAs/InP single-photon avalanche diodes (SPADs) are widely used in practical applications requiring near-infrared photon counting such as quantum key distribution (QKD). Photon detection efficiency and dark count rate are the intrinsic parameters of InGaAs/InP SPADs, due to the fact that their performances cannot be improved using different quenching electronics given the same operation conditions. After modeling these parameters and developing a simulation platform for InGaAs/InP SPADs, we investigate the semiconductor structure design and optimization. The parameters of photon detection ef…
We report on the first realization of time-dependent quantum detector tomography for commercially available InGaAs avalanche photo detectors. For the construction of appropriate time-dependent POVMs from experimentally measured data, we introduce a novel scheme to calculate the weight of the regularization term based on the amount of measured data. We compare our POVM-based results with the theoretical predictions of the previously developed model by Gouzien et al. In contrast to our measurement-based construction of a time-dependent POVM for photon detectors, this previous investigation exten…
We report on the first demonstration of fluorescence detection using single-photon avalanche photodiodes (SPADs) monolithically integrated with a microfabricated surface ion trap. The SPADs are positioned below the trapping positions of the ions, and designed to detect 370 nm photons emitted from single $^{174}$Yb$^+$ and $^{171}$Yb$^+$ ions. We achieve an ion/no-ion detection fidelity for $^{174}$Yb$^+$ of 0.99 with an average detection window of 7.7(1) ms. We report a dark count rate as low as 1.2 kHz at room temperature operation. The fidelity is limited by laser scatter, dark counts, and h…
Integrated quantum photonics, which allows for the development and implementation of chip-scale devices, is recognized as a key enabling technology on the road towards scalable quantum networking schemes. However, many state-of-the-art integrated quantum photonics demonstrations still require the coupling of light to external photodetectors. On-chip silicon single-photon avalanche diodes (SPADs) provide a viable solution as they can be seamlessly integrated with photonic components, and operated with high efficiencies and low dark counts at temperatures achievable with thermoelectric cooling. …
Photonic quantum technologies promise a revolution of the world of information processing, from simulation and computing to communication and sensing, thanks to the many advantages of exploiting single photons as quantum information carriers. In this scenario, single-photon detectors play a key role. On the one hand, superconducting nanowire single-photon detectors (SNSPDs) are able to provide remarkable performance on a broad spectral range, but their applicability is often limited by the need of cryogenic operating temperatures. On the other hand, single-photon avalanche diodes (SPADs) overc…
We present a method designed to efficiently extract optical signals from InGaAs avalanche photodiodes (APDs) operated in gated mode. In particular, our method permits an estimation of the fraction of counts which actually results from the signal being measured, as opposed to being produced by noise mechanisms, specifically by afterpulsing. Our method in principle allows the use of InGaAs APDs at high detection efficiencies, with the full operation bandwidth, either with or without resorting to the application of a dead time. As we show below, our method can be used in configurations where afte…
Single-photon detectors (SPDs) are the most sensitive instruments for light detection. In the near-infrared range, SPDs based on III-V compound semiconductor avalanche photodiodes have been extensively used during the past two decades for diverse applications due to their advantages in practicality including small size, low cost and easy operation. In the past decade, the rapid developments and increasing demands in quantum information science have served as key drivers to improve the device performance of single-photon avalanche diodes and to invent new avalanche quenching techniques. This Re…
Silicon single-photon avalanche diode (SPAD) is a core device for single-photon detection in the visible and the near-infrared range, and widely used in many applications. However, due to limits of the structure design and device fabrication for current silicon SPADs, the key parameters of detection befficiency and timing jitter are often forced to compromise. Here, we propose a nanostructured silicon SPAD, which achieves high detection efficiency with excellent timing jitter simultaneously over a broad spectral range. The optical and electric simulations show significant performance enhanceme…
In this paper we present a general method for estimating rates of accidental coincidence between a pair of single photon detectors operated within their saturation regimes. By folding the effects of recovery time of both detectors and the detection circuit into an "effective duty cycle" we are able to accomodate complex recovery behaviour at high event rates. As an example, we provide a detailed high-level model for the behaviour of passively quenched avalanche photodiodes, and demonstrate effective background subtraction at rates commonly associated with detector saturation. We show that by p…
Single-photon detectors, like Avalanche Photo Diodes (APDs), have a great importance in many fields like quantum key distribution, laser ranging, florescence microscopy, etc. Afterpulsing is a typical non ideal behavior of APDs, operated in Geiger mode, which adversely affects any application which measures the number or timing of detection events. Several conflicting studies have tried to model afterpulsing behavior and link it to fundamental semiconductor physics. Here we describe experiments we performed on at least 2 different detectors from 3 manufacturers, all commonly used in quantum op…
InGaAs single-photon avalanche photodiodes (APDs) are key enablers for high-bit rate quantum key distribution. However, the deviation of such detectors from ideal models can open side-channels for an eavesdropper, Eve, to exploit. The phenomenon of backflashes, whereby APDs reemit photons after detecting a photon, gives Eve the opportunity to passively learn the information carried by the detected photon without the need to actively interact with the legitimate receiver, Bob. Whilst this has been observed in slow-gated detectors, it has not been investigated in fast-gated APDs where it has bee…
We have performed a statistical characterization of the effect of afterpulsing in a free-running silicon single-photon detector by measuring the distribution of afterpulse waiting times in response to pulsed illumination and fitting it by a sum of exponentials. We show that a high degree of goodness of fit can be obtained for 5 exponentials, but the physical meaning of estimated characteristic times is dubious. We show that a continuous limit of the sum of exponentials with a uniform density between the limiting times gives excellent fitting results in the full range of the detector response f…
A near-infrared (NIR) enhanced silicon single-photon avalanche diode (SPAD) fabricated in a customized 0.13 $μ$m CMOS technology is presented. The SPAD has a depleted absorption volume of approximately 15 $μ$m x 15 $μ$m x 18 $μ$m. Electrons generated in the absorption region are efficiently transported by drift to a central active avalanche region with a diameter of 2 $μ$m. At the operating voltage, the active region contains a spherically uniform field peak, enabling the multiplication of electrons originating from all corners of the device. The advantages of the SPAD architecture include hig…
We show that semiconductor avalanche photodiodes can exhibit diminutive amplification noise during the early evolution of avalanches. The noise is so low that the number of locally excited charges that seed each avalanche can be resolved. These findings constitute an important first step towards realization of a solid-state noiseless amplifier. Moreover, we believe that the experimental setup used, \textit{i.e.}, time-resolving locally excited avalanches, will become a useful tool for optimizing the number resolution.
