The lowest radiative correction to the Casimir energy density between two parallel plates is calculated using effective field theory. Since the correlators of the electromagnetic field diverge near the plates, the regularized energy density is also divergent. However, the regularized integral of the energy density is finite and varies with the plate separation L as 1/L^7. This apparently paradoxical situation is analyzed in an equivalent, but more transparent theory of a massless scalar field in 1+1 dimensions confined to a line element of length L and satisfying Dirichlet boundary conditions.
We develop an exact method for computing Casimir forces and the power of radiative heat transfer between two arbitrary nanostructured surfaces out of thermal equilibrium. The method is based on a generalization of the scattering approach recently used in investigations on the Casimir effect. Analogously to the equilibrium case, we find that also out of thermal equilibrium the shape and composition of the surfaces enter only through their scattering matrices. The expressions derived provide exact results in terms of the scattering matrices of the intervening surfaces.
Axion is a light pseudoscalar particle of much interest for physics of elementary particles and for astrophysics. We review the recently obtained constraints on axion to nucleon coupling constants following from different experiments on measuring the Casimir interaction. These constraints are compared with those following from other laboratory experiments within the wide range of masses of axion-like particles from 10^{-10} to 20 eV. We also collect the most strong constraints on the Yukawa-type and power-type corrections to the Newton law of gravitation which follow from measurements of the C…
We find the Casimir-like energies for strings and membranes. We show that the related Casimir forces can be interpreted as quantum corrections to the classical tensions of the strings and membranes. We see that these corrections always increase the tensions of the circular string as well as spherical membrane, while for the straight string, rectangular and cylindrical membranes, these Casimir forces may increase or decrease the tensions. So we find that the quantum vacuum can break the (tensional) isotropy of the rectangular and cylindrical membranes. Also obtaining the nonzero-temperature Cas…
The finite conductivity corrections to the Casimir force in two configurations are calculated in the third and fourth orders in relative penetration depth of electromagnetic zero oscillations into the metal. The obtained analytical perturbation results are compared with recent computations. Applications to the modern experiments are discussed.
We study the Casimir-Lifshitz force and the radiative heat transfer in a system consisting of three bodies held at three independent temperatures and immersed in a thermal environment, the whole system being in a stationary configuration out of thermal equilibrium. The theory we develop is valid for arbitrary bodies, i.e. for any set of temperatures, dielectric and geometrical properties, and describes each body by means of its scattering operators. For the three-body system we provide a closed-form unified expression of the radiative heat transfer and of the Casimir-Lifshitz force (both in an…
By considering the effect of diffusion on the external electric field response of charge carriers in metals and semiconductors, it is shown that the finite temperature correction proposed Bostrom and Sernelius requires substantial modification, and there is no large correction as suggested for good conductors. The apparent violation of the Third Law of Thermodynamics of the various proposed temperature corrections to the Casimir force is also resolved. Finally, the effect of Debye screening on electrostatic calibrations between pure germanium surfaces is calculated
Using perturbation theory the first order dispersive correction to the Casimir energy between two plates separated by a dielectric material is calculated. It falls off with the plate separation as 1/L^6. The result is derived both from evaluation of the zero-point energy and within the Lifshitz formulation. It is pointed out that a possible surface term can be more important, varying like 1/L^5.
We discuss the temperature correction to the Casimir force between nonideal metallic bodies which caused disagreement in the literature. A general method to find the troubling term is proposed that does not require a direct reference to the Lifshitz formula. The linear in temperature correction is shown to survive for nonideal metals. It is important for small separations between bodies tested in the recent experiments.
We calculate the roughness correction to the Casimir effect in the parallel plates geometry for metallic plates described by the plasma model. The calculation is perturbative in the roughness amplitude with arbitrary values for the plasma wavelength, the plate separation and the roughness correlation length. The correction is found to be always larger than the result obtained in the Proximity Force Approximation.
We consider detailed roughness and conductivity corrections to the Casimir force in the recent Casimir force measurement employing an Atomic Force Microscope. The roughness of the test bodies-a metal plate and a sphere- was investigated with the Atomic Force Microscope and the Scanning Electron Microscope respectively. It consists of separate crystals of different heights and a stochastic background. The amplitude of roughness relative to the zero roughness level was determined and the corrections to the Casimir force were calculated up to the fourth order in a small parameter (which is this a…
The low-temperature asymptotic expressions for the Casimir interaction between two real metals described by Leontovich surface impedance are obtained in the framework of thermal quantum field theory. It is shown that the Casimir entropy computed using the impedance of infrared optics vanishes in the limit of zero temperature. By contrast, the Casimir entropy computed using the impedance of the Drude model attains at zero temperature a positive value which depends on the parameters of a system, i.e., the Nernst heat theorem is violated. Thus, the impedance of infrared optics withstands the ther…
A general analysis of thermal noise in torsion pendulums is presented. The specific case where the torsion angle is kept fixed by electronic feedback is analyzed. This analysis is applied to a recent experiment that employed a torsion pendulum to measure the Casimir force. The ultimate limit to the distance at which the Casimir force can be measured to high accuracy is discussed, and in particular the prospects for measuring the thermal correction are elaborated upon.
We discuss corrections to the Casimir effect at finite temperature and effective field theory. Recently, it has been shown that effective field theories can reproduce radiative corrections to the Casimir energy calculated in full QED. We apply effective field theory methods at finite temperature and reproduce the Casimir free energy. We show that the system undergoes dimensional reduction at high temperature and that it can be described by an effective three-dimensional field theory.
Hard momentum cutoff is used for estimating IR/UV corrections to the Casimir force. In contrast to the power-law corrections arising from the IR cutoff, one will find the UV cutoff-dependent corrections to be exponentially suppressed. As a consequence of this fact, there is no chance to detect the corrections due to UV cutoff arising for instance from the "minimum-length" scenarios even if fundamental quantum-gravity scale is taken around $\sim$ TeV (as is the case, for example, in various models with extra dimensions).
When comparing experimental results with theoretical predictions of the Casimir force, the accuracy of the theory is as important as the precision of experiments. Here we evaluate the Casimir force when finite conductivity of the reflectors and finite temperature are simultaneously taken into account. We show that these two corrections are correlated, i.e. that they can not, in principle, be evaluated separately and simply multiplied. We estimate the correlation factor which measures the deviation from this common approximation. We focus our attention on the case of smooth and plane plates wit…
Linear in temperature correction to the Casimir force is discussed. The correction is important for small separations between bodies tested in the recent experiments and disappears in the case of perfect conductors.
We consider the Casimir effect between two parallel plates localized on a brane. In order to properly compute the contribution to the Casimir energy due to any higher dimensional field, it is necessary to take into account the localization properties of the KK modes. When no massless mode appears in the spectrum, the correction to the Casimir energy is exponentially suppressed. When a massless mode is present in the spectrum, the correction to the Casimir energy can be, in principle, sizeable. Here we illustrate a new method to compute the correction to the Casimir energy between two parallel …
We recently proposed a new approach to the Casimir effect based on classical ray optics (the "optical approximation"). In this paper we show how to use it to calculate the local observables of the field theory. In particular we study the energy-momentum tensor and the Casimir pressure. We work three examples in detail: parallel plates, the Casimir pendulum and a sphere opposite a plate. We also show how to calculate thermal corrections, proving that the high temperature `classical limit' is indeed valid for any smooth geometry.
A new systematic correction for Casimir force measurements is proposed and applied to the results of an experiment that was performed more than a decade ago. This correction brings the experimental results into good agreement with the Drude model of the metallic plates' permittivity. The systematic is due to time-dependent fluctuations in the distance between the plates caused by mechanical vibrations or tilt, or position measurement uncertainty, and is similar to the correction for plate roughness.
A critical look is taken at the calculation of the Casimir effect. The boundary conditions play an important role and should be imposed in a physical way. An acceptable result for the vacuum energy is only obtained when different regularization schemes yield the same result. Radiative corrections to the Casimir force between two parallel plates due to electromagnetic vacuum fluctuations have been obtained both in full QED and in a low-energy, effective field theory with conflicting results. Including surface terms in the effective Lagrangian, the QED result can be understood. Finally, a proble…
The frequency spectrum of the finite temperature correction to the Casimir force can be determined by the use of the Lifshitz formalism for metallic plates of finite conductivity. We show that the correction for the TE electromagnetic modes is dominated by frequencies so low that the plates cannot be modelled as ideal dielectrics. We also address the issues relating to the behavior of electromagnetic fields at the surfaces an within metallic conductors, and claculate the surface modes using appropriate low-frequency metallic boundary conditions. Our result brings the tehrmal correction into ag…
The frequency spectrum of the finite temperature correction to the Casimir force can be determined by use of the Lifshitz formalism for metallic plates of finite conductivity. We show that the correction for the $TE$ electromagnetic modes is dominated by frequencies so low that the plates cannot be modelled as ideal dielectrics. We also address issues relating to the behavior of electromagnetic fields at the surfaces and within metallic conductors, and calculate the surface modes using appropriate low-frequency metallic boundary conditions. Our result brings the thermal correction into agreeme…
We develop a QED approach to find the contribution of the quantum vacuum to the electromagnetic Abraham force. Semi-classical theories predict diverging contributions from the quantum vacuum. We show that the divergencies disappear by Kramers-Bethe mass-renormalization. The finite remainder is compared to the relativistic corrections to the Abraham force. This work generalizes an earlier paper [1], dedicated to the harmonic oscillator, to the hydrogen atom and corrects two subtle errors.
In this work we analyze the incidence of the plates' thickness on the Casimir force and radiative heat transfer for a configuration of parallel plates in a non-equilibrium scenario, relating to Lifshitz's and Landauer's formulas. From a first-principles canonical quantization scheme for the study of the matter-field interaction, we give closed-form expressions for the non-equilibrium Casimir force and the heat transfer between plates of thickness $d_{\rm L},d_{\rm R}$. We distinguish three different contributions to the Casimir force and to the heat transfer in the general non-equilibrium situ…
Temperature correction to the Casimir force is considered for real metals at low temperatures. With the temperature decrease the mean free path for electrons becomes larger than the field penetration depth. In this condition description of metals with the impedance of anomalous skin effect is shown to be more appropriate than with the permittivity. The effect is crucial for the temperature correction. It is demonstrated that in the zero frequency limit the reflection coefficients should coincide with those of ideal metal if we demand the entropy to be zero at T=0. All the other prescriptions d…
We investigate Casimir effect as well as thermal Casimir effect for a pair of parallel perfectly plates placed in general stationary space-time background. It is found that the Casimir energy is influenced by the 00-component of metric and the corresponding quantity in dragging frame. We give a scheme to renormalize thermal correction to free energy in curved space-time. It is shown that the thermal corrections to Casimir thermodynamic quantities not only depend on the proper temperature and proper geometrical parameters of the plates, but also on the determinant of space-time metric.
Scattering theory methods make it possible to calculate the Casimir energy of a perfectly conducting elliptic cylinder opposite a perfectly conducting plane in terms of Mathieu functions. In the limit of zero radius, the elliptic cylinder becomes a finite-width strip, which allows for the study of edge effects. However, existing packages for computing Mathieu functions are insufficient for this calculation, because none can compute Mathieu functions of both the first and second kind for complex arguments. To address this shortcoming, we have written a general purpose Mathieu function package, …
We calculate the corrections to the Casimir force between two metals due to the spatial dispersion of their response functions. We employ model-independent expressions for the force in terms of the optical coefficients. We express the non-local corrections to the Fresnel coefficients employing the surface $d_\perp$ parameter, which accounts for the distribution of the surface screening charge. Within a self-consistent jellium calculation, spatial dispersion increases the Casimir force significatively for small separations. The nonlocal correction has the opposite sign than previously predicted…
The recently suggested modification of the transverse electric contribution to the Lifshitz formula (S. K. Lamoreaux, arXiv:0801.1283) is discussed. We show that this modification is inconsistent with the data of two precise experiments, and violates the Nernst heat theorem. The preprint's suggestion concerning the resolution of the "apparent violation of the Third Law of Thermodynamics" is shown to be incorrect.
We compute the leading radiative correction to the Casimir force between two parallel plates in the $λΦ^4$ theory. Dirichlet and periodic boundary conditions are considered. A heuristic approach, in which the Casimir energy is computed as the sum of one-loop corrected zero-point energies, is shown to yield incorrect results, but we show how to amend it. The technique is then used in the case of periodic boundary conditions to construct a perturbative expansion which is free of infrared singularities in the massless limit. In this case we also compute the next-to-leading order radiative correct…
We study the corrections to the Casimir effect in the classical geometry of two parallel metallic plates, separated by a distance $a$, due to the presence of a minimal length ($\hbar\sqrt{(β)}$) arising from quantum mechanical models based on a Generalized Uncertainty Principle (GUP). The approach for the quantization of the electromagnetic field is based on projecting onto the maximally localized states of a few specific GUP models and was previously developed to study the Casimir-Polder effect. For each model we compute the lowest order correction in the minimal length to the Casimir energy …
We consider the Casimir interaction energy between a plane and a sphere of radius $R$ at finite temperature $T$ as a function of the distance of closest approach $L$. Typical experimental conditions are such that the thermal wavelength $λ_T=\hbar c/k_\mathrm{B}T$ satisfies the condition $L\ll λ_T\ll R$. We derive the leading correction to the proximity-force approximation valid for such intermediate temperatures by developing the scattering formula in the plane-wave basis. Our analytical result captures the joint effect of the spherical geometry and temperature and is written as a sum of tempe…
A general theory of photon-mediated energy and momentum transfer in N-body planar systems out of thermal equilibrium is introduced. It is based on the combination of the scattering theory and the fluctuational-electrodynamics approach in many-body systems. By making a Landauer-like formulation of the heat transfer problem, explicit formulas for the energy transmission coefficients between two distinct slabs as well as the self-coupling coefficients are derived and expressed in terms of the reflection and transmission coefficients of the single bodies. We also show how to calculate local equili…
We calculate the low temperature corrections to the free energy for a sphere in front of a plane. First, the scalar field obeying Dirichet or Neumann boundary conditions is considered. Second, the electromagnetic field is studied, the sphere being perfectly conducting and being a dielectric ball with both, constant permittivity and permittivity of the plasma model.
A widely used method for estimating Casimir interactions [H. B. G. Casimir, Proc. K. Ned. Akad. Wet. 51, 793 (1948)] between gently curved material surfaces at short distances is the proximity force approximation (PFA). While this approximation is asymptotically exact at vanishing separations, quantifying corrections to PFA has been notoriously difficult. Here we use a derivative expansion to compute the leading curvature correction to PFA for metals (gold) and insulators (SiO$_2$) at room temperature. We derive an explicit expression for the amplitude $\hatθ_1$ of the PFA correction to the fo…
The surface impedance approach is discussed in connection with the precise calculation of the Casimir force between metallic plates. It allows to take into account the nonlocal connection between the current density and electric field inside of metals. In general, a material has to be described by two impedances $Z_{s}(ω,q)$ and $Z_{p}(ω,q)$ corresponding to two different polarization states. In contrast with the approximate Leontovich impedance they depend not only on frequency $ω$ but also on the wave vector along the plate $q$. In this paper only the nonlocal effects happening at frequencie…
The Casimir effect, reflecting quantum vacuum fluctuations in the electromagnetic field in a region with material boundaries, has been studied both theoretically and experimentally since 1948. The forces between dielectric and metallic surfaces both plane and curved have been measured at the 10 to 1 percent level in a variety of room-temperature experiments, and remarkable agreement with the zero-temperature theory has been achieved. In fitting the data various corrections due to surface roughness, patch potentials, curvature, and temperature have been incorporated. It is the latter that is th…
We derive the leading-order correction to the proximity force approximation (PFA) result for the electromagnetic Casimir interaction in the plane-sphere geometry by developing the scattering approach in the plane-wave basis. Expressing the Casimir energy as a sum over round trips between plane and sphere, we find two distinct contributions to the correction. The first one results from the variation of the Mie reflection operator, calculated within the geometric optical WKB approximation, over the narrow Fourier interval associated to specular reflection at the vicinity of the point of closest …
We calculate the second order roughness correction to the Casimir energy for two parallel metallic mirrors. Our results may also be applied to the plane-sphere geometry used in most experiments. The metallic mirrors are described by the plasma model, with arbitrary values for the plasma wavelength, the mirror separation and the roughness correlation length, with the roughness amplitude remaining the smallest length scale for perturbation theory to hold. From the analysis of the intracavity field fluctuations, we obtain the Casimir energy correction in terms of generalized reflection operators,…
We present the basic principles of non-local optics in connection with the calculation of the Casimir force between half-spaces and thin films. At currently accessible distances $L$, non-local corrections amount to about half a percent, but they increase roughly as 1/L at smaller separations. Self consistent models lead to corrections with the opposite sign as models with abrupt surfaces.
The Casimir force and free energy at low temperatures has been the subject of focus for some time. We calculate the temperature correction to the Casimir-Lifshitz free energy between two parallel plates made of dielectric material possessing a constant conductivity at low temperatures, described through a Drude-type dielectric function. For the transverse magnetic (TM) mode such a calculation is new. A further calculation for the case of the TE mode is thereafter presented which extends and generalizes previous work for metals. A numerical study is undertaken to verify the correctness of the a…
The Casimir interaction between two thick parallel plates, one made of metal and the other of dielectric, is investigated at nonzero temperature. It is shown that in some temperature intervals the Casimir pressure and the free energy of a fluctuating field are the nonmonotonous functions of temperature and the respective Casimir entropy can be negative. The physical interpretation for these conclusions is given. At the same time we demonstrate that the entropy vanishes when the temperature goes to zero, i.e., in the Casimir interaction between metal and dielectric the Nernst heat theorem is sa…
We study the interplay of thermal and diffractive effects in Casimir energies. We consider plates with edges, oriented either parallel or perpendicular to each other, as well as a single plate with a slit. We compute the Casimir energy at finite temperature using a formalism in which the diffractive effects are encoded in a lower dimensional non-local field theory that lives in the gap between the plates. The formalism allows for a clean separation between direct or geometric effects and diffractive effects, and makes an analytic derivation of the temperature dependence of the free energy poss…
So far there has been no reliable method to calculate the Casimir force at separations comparable to the root-mean-square of the height fluctuations of the surfaces. Statistical analysis of rough gold samples has revealed the presence of peaks considerably higher than the root-mean-square roughness. These peaks redefine the minimum separation distance between the bodies and can be described by extreme value statistics. Here we show that the contribution of the high peaks to the Casimir force can be calculated with a pairwise additive summation, while the contribution of asperities with normal …
We study the geometrical corrections to the simple Proximity Force Approximation for the non-retarded Casimir force. We present analytical results for the force between objects of various shapes and substrates, and between pairs of objects. We compare the results to those from more exact numerical calculations. We treat spheres, spheroids, cylinders, cubes, cones, and wings; the analytical PFA results together with the geometrical correction factors are summarized in a table.
We study the Casimir interaction between perfectly conducting sphere and plate in the classical limit of high temperatures. By taking the small-distance expansion of the exact scattering formula, we compute the leading correction to the Casimir energy beyond the commonly employed proximity force approximation. We find that for a sphere of radius $R$ at distance $d$ from the plate the correction is of the form $\ln^2 (d/R)$, in agreement with indications from recent large-scale numerical computations. We develop a fast-converging numerical scheme for computing the Casimir interaction to high pr…
We discuss possibility to obtain stronger constraints on non-Newtonian gravity from measuring the gradient of the Casimir force between a cylinder and a plate. Exact analytical expression for the Yukawa-type force in a cylinder-plate configuration is obtained, as well as its asymptotic expansions. The gravitational force is compared with the Casimir force acting between a cylinder and a plate. Numerical computations for the prospective constraints on non-Newtonian gravity are performed for recently proposed experiment using a microfabricated cylinder attached to a micromachined oscillator. Spe…
Perturbative corrections to the Casimir free energy due to macroscopic roughness of dielectric interfaces are obtained in the framework of an effective low-energy field theory. It describes the interaction of electromagnetic fields with materials whose plasma frequency $ω_p$ determines the low-energy scale. The naïve perturbative expansion of the single-interface scattering matrix in the variance of the profile is sensitive to short wavelength components of the roughness correlation function. We introduce generalized counter terms that subtract and correct these high-momentum contributions to …
The problem of estimating the thermal corrections to Casimir and Casimir-Polder interactions in systems involving conducting plates has attracted considerable attention in the recent literature on dispersion forces. Alternative theoretical models, based on distinct low-frequency extrapolations of the plates reflection coefficient for transverse electric (TE) modes, provide widely different predictions for the magnitude of this correction. In this paper we examine the most widely used prescriptions for this reflection coefficient from the point of view of their consistency with the Bohr-van Lee…
We obtain constraints on parameters of the Yukawa-type corrections to Newton's gravitational law from measurements of the gradient of the Casimir force between surfaces coated with ferromagnetic metal Ni and from measurements of the Casimir force between Au-coated sinusoidally corrugated surfaces at various angles between corrugations. It is shown that constraints following from the experiment with magnetic surfaces are slightly weaker than currently available strongest constraints, but benefit from increased reliability and independence of systematic effects.The constraints derived from the e…
It was recently found that thermodynamic anomalies which arise in the Casimir effect between metals described by the Drude model can be attributed to the interaction of fluctuating Foucault (or eddy) currents [Phys. Rev. Lett. 103, 130405 (2009)]. We show explicitly that the two leading terms of the low-temperature correction to the Casimir free energy of interaction between two plates, are identical to those pertaining to the Foucault current interaction alone, up to a correction which is very small for good metals. Moreover, a mode density along real frequencies is introduced, showing that t…
The physical origin of the negative thermal correction to the Casimir force between metals is clarified. For this purpose the asymptotic behavior of the thermal Casimir force is analyzed at large and small distances in the real frequency representation. Contributions from propagating and evanescent waves are considered separately. At large distances they cancel each other in substantial degree so that only the attractive Lifshitz limit survives. At smaller separations the repulsive evanescent contribution of s-polarization dominates in the case of two metals or a metal and a high-permittivity …
The Casimir-Polder force is an attractive force between a polarizable atom and a conducting or dielectric boundary. Its original computation was in terms of the Lamb shift of the atomic ground state in an electromagnetic field (EMF) modified by boundary conditions along the wall and assuming a stationary atom. We calculate the corrections to this force due to a moving atom, demanding maximal preservation of entanglement generated by the moving atom-conducting wall system. We do this by using non-perturbative path integral techniques which allow for coherent back-action and thus can treat non-M…
We report stronger constraints on the parameters of Yukawa-type corrections to Newtonian gravity from measurements of the lateral Casimir force between sinusoidally corrugated surfaces of a sphere and a plate. In the interaction range from 1.6 to 14 nm the strengthening of previously known high confidence constraints up to a factor of $2.4\times 10^7$ is achieved using these measurements. It is shown that the replacement of a plane plate with a corrugated one in the measurements of the normal Casimir force by means of an atomic force microscope would result in the strengthening of respective h…
The proximity force approximation (PFA) has been widely used as a tool to evaluate the Casimir force between smooth objects at small distances. In spite of being intuitively easy to grasp, it is generally believed to be an uncontrolled approximation. Indeed, its validity has only been tested in particular examples, by confronting its predictions with the next to leading order (NTLO) correction extracted from numerical or analytical solutions obtained without using the PFA. In this article we show that the PFA and its NTLO correction may be derived within a single framework, as the first two te…
