We consider a Fabry-Perot cavity made by two moving mirrors and driven by an intense classical laser field. We show that stationary entanglement between two vibrational modes of the mirrors, with effective mass of the order of micrograms, can be generated by means of radiation pressure. The resulting entanglement is however quite fragile with respect to temperature.
Precisely resolving the continuous variable energy-time entanglement of paired photons is an important issue in quantum optics. The Fabry-Perot interferometer provides a distinguished opportunity for this purpose if the single photon pulse's self-interference is carefully avoided. A dual channel Fabry-Perot interferometer is proposed and studied with the focus put upon higher order quantum interference effects. When the two channels are properly set up, it is capable of resolving the energy-time entanglement in detail analogously to that a usual Fabry-Perot interferometer can resolve classical…
We have built a microwave Fabry-Perot resonator made of diamond-machined copper mirrors coated with superconducting niobium. Its damping time (Tc = 130 ms at 51 GHz and 0.8 K) corresponds to a finesse of 4.6 x 109, the highest ever reached for a Fabry-Perot in any frequency range. This result opens novel perspectives for quantum information, decoherence and non-locality studies.
We generate high-dimensional time-bin entanglement using a mode-locked laser and analyze it with a 2-photon Fabry-Perot interferometer. The dimension of the entangled state is limited only by the phase coherence between subsequent pulses and is practically infinite. In our experiment a pico-second mode-locked laser at 532 nm pumps a non-linear potassium niobate crystal to produce photon pairs by spontaneous parametric down-conversion at 810 and 1550 nm.
With photon-number resolving detectors, we show compression of interference fringes with increasing photon numbers for a Fabry-Perot interferometer. This feature provides a higher precision in determining the position of the interference maxima compared to a classical detection strategy. We also theoretically show supersensitivity if N-photon states are sent into the interferometer and a photon-number resolving measurement is performed.
We have constructed an apparatus containing a linear ion trap and a high-finesse optical cavity in the ultraviolet spectral range. In our construction, we have avoided all organic materials inside the ultrahigh vacuum chamber. We show that, unlike previously reported, the optical cavity does not degrade in performance over a time scale of 9 months.
We discuss a method to select the velocities of ultra-cold atoms with a modified Fabry-Perot type of device made of two effective barriers and a well created, respectively, by blue and red detuned lasers. The laser parameters may be used to select the peak and width of the transmitted velocity window. In particular, lowering the central well provides a peak arbitrarily close to zero velocity having a minimum but finite width. The low-energy atomic scattering off this laser device is parameterized and approximate formulae are found to describe and explain its behaviour.
The development of efficient network nodes is a key element for the realisation of quantum networks which promise great capabilities as distributed quantum computing or provable secure communication. We report the realisation of a quantum network node using a trapped ion inside a fiber-based Fabry-Perot cavity. We show the generation of deterministic entanglement at a high fidelity of $ 91.2(2) $\,\% between a trapped Yb--ion and a photon emitted into the resonator mode. We achieve a success probability for generation and detection of entanglement for a single shot of $ 2.5 \cdot 10^{-3}$ resu…
We describe a new and distinctive interferometry in which a probe particle scatters off a superposition of locations of a single free target particle. In one dimension, probe particles incident on superposed locations of a single "mirror" can interfere as if in a Fabry-Perot interferometer; in two dimensions, probe particles scattering off superposed locations of a single "slit" can interfere as if in a two-slit Young interferometer. The condition for interference is loss of orthogonality of the target states and reduces, in simple examples, to transfer of orthogonality from target to probe st…
In this paper we describe a Fabry-Perot interferometer in the language of quantum optics. We go on to model the Fabry-Perot interferometer as a beam splitter having frequency dependent transmissivity and reflectivity coefficients. The antibunching, a totally non-classical effect, is to be expected if one excites this interferometer with carefully frequency-selected single photons arriving simultaneously from opposite directions. Contrary to a normal beam splitter, even slightly different frequency single photons should be able to show this effect, as long as the photon counters are not frequen…
Fabry-Perot interferometers have stimulated numerous scientific and technical applications ranging from high resolution spectroscopy over metrology, optical filters to interfaces of light and matter at the quantum limit and more. End facet machining of optical fibers has enabled the miniaturization of optical Fabry-Perot cavities. Integration with fiber wave guide technology allows for small yet open devices with favorable scaling properties including mechanical stability and compact mode geometry. These Fiber Fabry-Perot Cavities (FFPCs) are stimulating extended applications in many fields in…
We carry out analysis of optomechanical system formed by moveable mirror of Fabry-Perot cavity pumped by detuned laser. Optical spring arising from detuned pump creates in the system several eigen modes which could be treated as high-Q oscillators. Modulation of laser power results in parametric modulation of oscillators spring constants thus allowing to squeeze noise in quadratures of the modes. Evidence of the squeezing could be found in the light reflected from the cavity.
We study a dispersion-compensated high-finesse optical Fabry-Perot microcavity under high-intensity cw pumping. The Kerr non-linearity in the optical coatings causes a spontaneous four-wave mixing process, which leads to the emission of time-correlated photon pairs. The photon frequencies are shifted by $\pm 1$ free spectral range relative to the pump frequency. This setup allows for constructing a photon-pair source with precisely adjustable frequency difference between the emitted photons, which may have applications in quantum communication.
A moving pellicle superconducting mirror, which is driven by radiation pressure on its one side, and by the Coulomb force on its other side, can become a parametric oscillator that can generate microwaves when placed within a high-Q superconducting Fabry-Perot resonator system. A paraxial-wave analysis shows that the fundamental resonator eigenmode needed for parametric oscillation is the TM011 mode. A double Fabry-Perot structure is introduced to resonate the pump and the idler modes, but to reject the parasitic anti-Stokes mode. The threshold for oscillation is estimated based on the radiati…
We report on the realization of an open plane-concave Fabry-Pérot resonator with a mode volume below $λ^3$ at optical frequencies. We discuss some of the less common features of this new microcavity regime and show that the ultrasmall mode volume allows us to detect cavity resonance shifts induced by single nanoparticles even at quality factors as low as $100$. Being based on low-reflectivity micromirrors fabricated on a silicon cantilever, our experimental arrangement provides broadband operation, tunability of the cavity resonance, lateral scanning and promise for optomechanical studies.
We report the experimental observation of the photothermal effect. The measurements are performed by modulating the laser power absorbed by the mirrors of two high-finesse Fabry-Perot cavities. The results are very well described by a recently proposed theoretical model [M. Cerdonio, L. Conti, A. Heidmann and M. Pinard, Phys. Rev. D 63 (2001) 082003], confirming the correctness of such calculations. Our observations and quantitative characterization of the photothermal effect demonstrate its critical importance for high sensitivity interferometric displacement measurements, as those necessary …
We experimentally realize a Fabry-Perot-type optical microresonator near the cesium D2 line wavelength based on a tapered optical fiber, equipped with two fiber Bragg gratings which enclose a sub-wavelength diameter waist. Owing to the very low taper losses, the finesse of the resonator reaches F = 86 while the on-resonance transmission is T = 11 %. The characteristics of our resonator fulfill the requirements of non-linear optics and cavity quantum electrodynamics in the strong coupling regime. In combination with its demonstrated ease of use and its advantageous mode geometry, it thus opens …
In recent years quantum phenomena have been experimentally demonstrated on variety of optomechanical systems ranging from micro-oscillators to photonic crystals. Since single photon couplings are quite small, most experimental approaches rely on the realization of high finesse Fabry-Perot cavities in order to enhance the effective coupling. Here we show that by exploiting a, long path, low finesse fiber Fabry-Perot interferometer ground state cooling can be achieved. We model a 100 m long cavity with a finesse of 10 and analyze the impact of additional noise sources arising from the fiber. As …
We numerically demonstrate atomic Fabry-Perot resonances for a pulsed interacting Bose-Einstein condensate (BEC) source transmitting through double Gaussian barriers. These resonances are observable for an experimentally-feasible parameter choice, which we determined using a previously-developed analytical model for a plane matter-wave incident on a double rectangular barrier system. By simulating an effective one-dimensional Gross-Pitaevskii equation, we investigate the effect of atom number, scattering length, and BEC momentum width on the resonant transmission peaks. For $^{85}$Rb atomic so…
We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F>=130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose-Einstein condensates enabled by this cavity [Y. Colombe et al., Nature 450, 272 (2007)]. It should also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle le…
Optical transport represents a natural route towards fast communications, and it is currently used in large scale data transfer. The progressive miniaturization of devices for information processing calls for the microscopic tailoring of light transport and confinement at length scales appropriate for the upcoming technologies. With this goal in mind, we present a theoretical analysis of a one-dimensional Fabry-Perot interferometer built with two highly saturable nonlinear mirrors: a pair of two-level systems. Our approach captures non-linear and non-reciprocal effects of light transport that …
We demonstrate the fabrication of ultra-low-loss, all-fiber Fabry-Pérot cavities containing a nanofiber section, optimized for cavity quantum electrodynamics. By continuously monitoring the finesse and fiber radius during fabrication of a nanofiber between two fiber Bragg gratings, we are able to precisely evaluate taper transmission as a function of radius. The resulting cavities have an internal round-trip loss of only 0.31% at a nanofiber waist radius of 207 nm, with a total finesse of 1380, and a maximum expected internal cooperativity of $\sim$ 1050 for a cesium atom on the nanofiber surf…
Polariton states with high levels of chiral dissymmetry offer exciting prospects for quantum information, sensing, and lasing applications. Such dissymmetry must emanate from either the involved optical resonators or the quantum emitters. Here, we theoretically demonstrate how chiral polaritons can be realized by combining (high quality factor) achiral Fabry-Perot cavities with samples exhibiting a phenomenon known as "apparent circular dichroism" (ACD), which results from an interference between linear birefringence and dichroic interactions. By introducing a quantum electrodynamical theory o…
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry-Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound-Drever-Hall locking technique is compared to a novel rigid cavity design that makes use of the hig…
We demonstrate fiber Fabry-Perot (FFP) cavities with concave mirrors that can be operated at cavity lengths as large as 1.5mm without significant deterioration of the finesse. This is achieved by using a laser dot machining technique to shape spherical mirrors with ultralow roughness and employing single-mode fibers with large mode area for good mode matching to the cavity. Additionally, in contrast to previous FFPs, these cavities can be used over an octave-spanning frequency range with adequate coatings. We also show directly that shape deviations caused by the fiber's index profile lead to …
Ramsey spectroscopy via coherent population trapping (CPT) is essential in precision measurements. The conventional CPT-Ramsey fringes contain numbers of almost identical oscillations and so that it is difficult to identify the central fringe. Here, we experimentally demonstrate a temporal spinwave Fabry-Pérot interferometry via double-$Λ$ CPT of laser-cooled $^{87}$Rb atoms. Due to the constructive interference of temporal spinwaves, the transmission spectrum appears as a comb of equidistant peaks in frequency domain and thus the central Ramsey fringe can be easily identified. From the optica…
