We develop a formalism for the calculation of the flow of angular momentum carried by the fluctuating electromagnetic field within a cavity bounded by two flat anisotropic materials. By generalizing a procedure employed recently for the calculation of the Casimir force between arbitrary materials, we obtain an expression for the torque between anisotropic plates in terms of their reflection amplitude matrices. We evaluate the torque in 1D for ideal and realistic model materials.
We consider two parallel corrugated plates and show that a Casimir torque arises when the corrugation directions are not aligned. We follow the scattering approach and calculate the Casimir energy up to second order in the corrugation amplitudes, taking into account nonspecular reflections, polarization mixing and the finite conductivity of the metals. We compare our results with the proximity force approximation, which overestimates the torque by a factor 2 when taking the conditions that optimize the effect. We argue that the Casimir torque could be measured for separation distances as large…
We investigate in detail the Casimir torque induced by quantum vacuum fluctuations between two nanostructured plates. Our calculations are based on the scattering approach and take into account the coupling between different modes induced by the shape of the surface which are neglected in any sort of proximity approximation or effective medium approach. We then present an experimental setup aiming at measuring this torque.
The linear momentum and angular momentum of virtual photons of quantum vacuum fluctuations can induce the Casimir force and the Casimir torque, respectively. While the Casimir force has been measured extensively, the Casimir torque has not been observed experimentally though it was predicted over forty years ago. Here we propose to detect the Casimir torque with an optically levitated nanorod near a birefringent plate in vacuum. The axis of the nanorod tends to align with the polarization direction of the linearly polarized optical tweezer. When its axis is not parallel or perpendicular to the…
We utilize Effective Field Theory(EFT) techniques to calculate the casimir torque on a cylindrical gear in the presence of a polarizable but neutral object. We present results for the energy and torque as a function of angle for a gear with multiple cogs, as well as for the case of a concentric cylindrical gear.
The torque density per unit height exerted on a perfectly conducting wedge due to the quantum vacuum fluctuations (the Casimir torque) is obtained. A canonical quantum field theoretical approach with the method of calculating vacuum-to-vacuum propagator (Green function) [1] is used.
Casimir interactions play an important role in the dynamics of nanoscale objects. Here, we investigate the noncontact transfer of angular momentum at the nanoscale through the analysis of the Casimir torque acting on a chain of rotating nanoparticles. We show that this interaction, which arises from the vacuum and thermal fluctuations of the electromagnetic field, enables an efficient transfer of angular momentum between the elements of the chain. Working within the framework of fluctuational electrodynamics, we derive analytical expressions for the Casimir torque acting on each nanoparticle i…
More than forty years ago, Barash published a calculation of the full retarded Casimir-Lifshitz torque for planar birefringent media with arbitrary degrees of anisotropy. An independent theoretical confirmation has been lacking since. We report a systematic and transparent derivation of the torque between two media with both electric and magnetic birefringence. Our approach, based on an eigenmode decomposition of Maxwell's equations, generalizes Barash's result for electrically birefringent materials, and can be generalized to a wide range of anisotropic materials and finite thickness effects.
Motivated by the problem of Casimir energy, we investigate the idea of using inhomogeneity of surfaces instead of their corrugation, which leads to Casimir interaction between two inhomogeneous semi-transparent concentric cylinders. Using the multiple scattering method, we study the Casimir energy and torque between the cylinders with different potentials subjected to Dirichlet boundary conditions, both in weak and strong coupling regimes. We also extend our formalism to the case of two inhomogeneous dielectrics in a weak coupling regime.
The Casimir force between two parallel plates separated by anisotropic media is investigated. We theoretically calculate the Casimir force between two parallel plates when the interspace between the plates is filled with anisotropic media. Our result shows that the anisotropy of the material between the plates can significantly affect the Casimir force, especially the direction of the force. If ignoring the anisotropy of the in-between material makes the force to be repulsive (attractive), by contrast, taking the anisotropy into account may produce an extra attractive (repulsive) force. The ph…
We extend a fictitious-cavity approach to calculate the Casimir effect for cavities bounded by flat anisotropic materials. We calculate the energy, force and torque in terms only of the optical coefficients of the walls of the cavity. We calculate the Casimir effect at zero and finite temperature for some simple systems. As a non trivial application, we calculate the torque between a semi-infinite anisotropic plate and an anisotropic film. We study the effect of the film thickness in the torque and find an optimal width that maximizes the torque.
In this paper, dedicated to Johan Høye on the occasion of his 70th birthday, we examine manifestations of Casimir torque in the weak-coupling approximation, which allows exact calculations so that comparison with the universally applicable, but generally uncontrolled, proximity force approximation may be made. In particular, we examine Casimir energies between planar objects characterized by $δ$-function potentials, and consider the torque that arises when angles between the objects are changed. The results agree very well with the proximity force approximation when the separation distance bet…
Vacuum Torque Without Anisotropy: Switchable Casimir Torque Between Altermagnets
Tsung-Dao Lee Institute & School of Physics and Astronomy, Shanghai Jiao Tong University（上海交大李政道研究所与物理与天文学院）；Shanghai Branch, Hefei National Laboratory（合肥国家实验室上海分部）
We present a calculation of the Casimir torque acting on a liquid crystal near a birefringent crystal. In this system, a liquid crystal bulk is uniformly aligned at one surface and is twisted at the other surface by a birefringent crystal, e.g. barium titanate. The liquid crystal is separated from the solid crystal by an isotropic, transparent material such as SiO$_2$. By varying the thickness of the deposited layer, we can observe the effect of retardation on the torque (which differentiates it from the close-range van der Waals torque). We find that a barium titanate slab would cause 5CB (4-…
Barash has calculated the Casimir forces between parallel birefringent plates with optical axes parallel to the plate boundaries [Izv. Vyssh. Uchebn.\ Zaved., Radiofiz., {\bf 12}, 1637 (1978)]. The interesting new feature of the solution compared to the case of isotropic plates is the existence of a Casimir torque which acts to line up the optical axes if they are not parallel or perpendicular. The forces were found from a calculation of the Helmholtz free energy of the electromagnetic field. Given the length of the calculations in this problem and hopes of an experimental measurement of the t…
We extend our previous work [Phys. Rev. Lett. {\bf 100}, 183602 (2008)] on the generalization of the Casimir-Lifshitz theory to treat anisotropic magnetodielectric media, focusing on the forces between metals and magnetodielectric metamaterials and on the possibility of inferring magnetic effects by measurements of these forces. We present results for metamaterials including structures with uniaxial and biaxial magnetodielectric anisotropies, as well as for structures with isolated metallic or dielectric properties that we describe in terms of filling factors and a Maxwell Garnett approximatio…
We show that an isotropic dipolar particle in the vicinity of a substrate made of nonreciprocal plasmonic materials can experience a lateral Casimir force and torque when the particle's temperature differs from that of the slab and the environment. We connect the existence of the lateral force to the asymmetric dispersion of nonreciprocal surface polaritons and the existence of the lateral torque to the spin-momentum locking of such surface waves. Using the formalism of fluctuational electrodynamics, we show that the features of lateral force and torque should be experimentally observable usin…
The Casimir-Lifshitz torque between two biaxially polarizable anisotropic planar slabs is shown to exhibit a non-trivial sign-reversal in its rotational sense. The critical distance $a_c$ between the slabs that marks this reversal is characterized by the frequency $ω_c\!\sim \!c/2a_c$ at which the in-planar polarizabilities along the two principal axes are equal. The two materials seek to align their principal axes of polarizabilities in one direction below $a_c$, while above $a_c$ their axes try to align rotated perpendicular relative to their previous minimum energy orientation. The sign-rev…
The Casimir energy is constructed for a system consisting of two semi-infinite slabs of anisotropic material. Each of them is characterized by bulk complex dielectric permittivity tensor and surface conductivity on the free boundary. We found general form of the scattering matrix and Fresnel coefficients for each part of the system by solving Maxwell equations in the anisotropic media.
The Casimir effect is a force arising in the macroscopic world as a result of radiation pressure of vacuum fluctuations. It thus plays a key role in the emerging domain of nano-electro-mechanical systems (NEMS). This role is reviewed in the present paper, with discussions of the influence of the material properties of the mirrors, as well as the geometry dependence of the Casimir effect between corrugated mirrors. In particular, the lateral component of the Casimir force and restoring torque between metal plates with misaligned corrugations are evaluated.
We study the torque arising between two corrugated metallic plates due to the interaction with electromagnetic vacuum. This Casimir torque can be measured with torsion pendulum techniques for separation distances as large as 1$μ$m. It allows one to probe the nontrivial geometry dependence of the Casimir energy in a configuration which can be evaluated theoretically with accuracy. In the optimal experimental configuration, the commonly used proximity force approximation turns out to overestimate the torque by a factor 2 or larger.
We investigate the thermal Casimir force between two parallel plates made of different isotropic materials which are separated by a uniaxial anisotropic film. Numerical computations of the Casimir pressure at T=300K are performed using the complete Lifshitz formula adapted for an anisotropic intervening layer and in the nonrelativistic limit. It is shown that the standard (nonrelativistic) theory of the van der Waals force is not applicable in this case, because the effects of retardation contribute significantly even for film thicknesses of a few nanometers. We have also obtained simple analy…
The Casimir--Polder interaction between an anisotropic particle and a surface is orientation dependent. We study novel orientational effects that arise due to curvature of the surface for distances much smaller than the radii of curvature by employing a derivative expansion. For nanoparticles we derive a general short distance expansion of the interaction potential in terms of their dipolar polarizabilities. Explicit results are presented for nano-spheroids made of SiO$_2$ and gold, both at zero and at finite temperatures. The preferred orientation of the particle is strongly dependent on curv…
Using an exact numerical method for finite nonplanar objects, we demonstrate a stable mechanical suspension of a silica cylinder within a metallic cylinder separated by ethanol, via a repulsive Casimir force between the silica and the metal. We investigate cylinders with both circular and square cross sections, and show that the latter exhibit a stable orientation as well as a stable position, via a method to compute Casimir torques for finite objects. Furthermore, the stable orientation of the square cylinder is shown to undergo an unusual 45 degrees transition as a function of the separation…
We review the relation between Casimir effect and geometry, emphasizing deviations from the commonly used Proximity Force Approximation (PFA). We use to this aim the scattering formalism which is nowadays the best tool available for accurate and reliable theory-experiment comparisons. We first recall the main lines of this formalism when the mirrors can be considered to obey specular reflection. We then discuss the more general case where non planar mirrors give rise to non-specular reflection with wavevectors and field polarisations mixed. The general formalism has already been fruitfully use…
This paper presents a new method for the efficient numerical computation of Casimir interactions between objects of arbitrary geometries, composed of materials with arbitrary frequency-dependent electrical properties. Our method formulates the Casimir effect as an interaction between effective electric and magnetic current distributions on the surfaces of material bodies, and obtains Casimir energies, forces, and torques from the spectral properties of a matrix that quantifies the interactions of these surface currents. The method can be formulated and understood in two distinct ways: \textbf{…
We study the Casimir-Polder interaction at finite temperatures between a polarizable small, anisotropic particle and a non-planar surface using a derivative expansion. We obtain the leading and the next-to-leading curvature corrections to the interaction for low and high temperatures. Explicit results are provided for the retarded limit in the presence of a perfectly conducting surface.
We present the scattering approach which is nowadays the best tool for describing the Casimir force in realistic experimental configurations. After reminders on the simple geometries of 1d space and specular scatterers in 3d space, we discuss the case of stationary arbitrarily shaped mirrors in electromagnetic vacuum. We then review specific calculations based on the scattering approach, dealing for example with the forces or torques between nanostructured surfaces and with the force between a plane and a sphere. In these various cases, we account for the material dependence of the forces, and…
Casimir and Casimir-Polder repulsion have been known for more than 50 years. The general "Lifshitz" configuration of parallel semi-infinite dielectric slabs permits repulsion if they are separated by a dielectric fluid that has a value of permittivity that is intermediate between those of the dielectric slabs. This was indirectly confirmed in the 1970s, and more directly by Capasso's group recently. It has also been known for many years that electrically and magnetically polarizable bodies can experience a repulsive quantum vacuum force. More amenable to practical application are situations wh…
In a recent paper we have formulated a theory of non-relativistic quantum electrodynamics in the presence of an inhomogeneous Huttner-Barnett dielectric. Here we generalize the formalism to anisotropic materials and show how it may be modified to include conducting surfaces. We start with the derivation of the photon propagator for a slab of material and use it to work out the energy-level shift near a medium whose conductivity in the direction parallel to the surface far exceeds that in the direction perpendicular to the surface. We investigate the influence of the anisotropy of the material'…
Photonic topological insulator plates violate Lorentz reciprocity which leads to a directionality of surface-guided modes. This in-plane directionality can be imprinted via an applied magnetic field. On the basis of macroscopic quantum electrodynamics in nonreciprocal media, we show that two photonic topological insulator surfaces are subject to a tuneable, magnetic-field dependent Casimir torque. Due to the directionality, this torque exhibits a unique $2π$ periodicity, in contradistinction to the Casimir torques encountered for reciprocal uniaxial birefringent media or corrugated surfaces wh…
Recently, the topic of Casimir repulsion has received a great deal of attention, largely because of the possibility of technological application. The general subject has a long history, going back to the self-repulsion of a conducting spherical shell and the repulsion between a perfect electric conductor and a perfect magnetic conductor. Recently it has been observed that repulsion can be achieved between ordinary conducting bodies, provided sufficient anisotropy is present. For example, an anisotropic polarizable atom can be repelled near an aperture in a conducting plate. Here we provide new…
In earlier papers we have applied multiple scattering techniques to calculate Casimir forces due to scalar fields between different bodies described by delta function potentials. When the coupling to the potentials became weak, closed-form results were obtained. We simplify this weak-coupling technique and apply it to the case of tenuous dielectric bodies, in which case the method involves the summation of van der Waals (Casimir-Polder) interactions. Once again exact results for finite bodies can be obtained. We present closed formulas describing the interaction between spheres and between cyl…
Based on the theory of macroscopic quantum electrodynamics, we generalize the expression of the Casimir force for nonreciprocal media. The essential ingredient of this result is the Green's tensor between two nonreciprocal semi-infinite slabs including a reflexion matrix with four coefficients that mixes optical polarizations. This Green's tensor does not obey Lorentz's reciprocity and thus violates time-reversal symmetry. The general result for the Casimir force is analyzed in the retarded and nonretarded limits, concentrating on the influences arising from reflections with or without change …
We discuss the van der Waals (Casimir) free energies and pressures of thin metallic films, consisting from one to fifteen atomic layers, with regard to the anisotropy in their dielectric properties. Both free-standing films and films deposited on a dielectric substrate are considered. The computations are performed for a Au film and a sapphire substrate. According to our results, for free-standing Au films consisting of one and three atomic layers the respective relative error arising from the use of an isotropic (bulk) dielectric permittivity is equal to 73% and 37% for the van der Waals ener…
In this paper we study an archetypical scenario in which repulsive Casimir-Polder forces between an atom or molecule and two macroscopic bodies can be achieved. This is an extension of previous studies of the interaction between a polarizable atom and a wedge, in which repulsion occurs if the atom is sufficiently anisotropic and close enough to the symmetry plane of the wedge. A similar repulsion occurs if such an atom passes a thin cylinder or a wire. An obvious extension is to compute the interaction between such an atom and two facing wedges, which includes as a special case the interaction…
We provide further evidence for the nontrivial interplay between geometry and temperature in the Casimir effect. We investigate the temperature dependence of the Casimir force between an inclined semi-infinite plate above an infinite plate in D dimensions using the worldline formalism. Whereas the high-temperature behavior is always found to be linear in T in accordance with dimensional-reduction arguments, different power-law behaviors at small temperatures emerge. Unlike the case of infinite parallel plates, which shows the well-known T^D behavior of the force, we find a T^{D-1} behavior for…
We have used density functional theory to calculate the anisotropic dielectric functions for ultrathin gold sheets (composed of 1, 3, 6, and 15 atomic layers). Such films are important components in nano-electromechanical systems. When using correct dielectric functions rather than bulk gold dielectric functions we predict an enhanced attractive Casimir-Lifshitz force (at most around 20%) between two atomically thin gold sheets. For thicker sheets the dielectric properties and the corresponding Casimir forces approach those of gold half-spaces. The magnitude of the corrections that we predict …
We develop a formalism suitable for studying Maxwell's equations in the presence of a medium that is axially symmetric, in particular with respect to Casimir-Polder interaction energies. As an application, we derive the Casimir-Polder interaction energy between an electric $δ$-function plate and an anisotropically polarizable molecule for arbitrary orientations of the principal axes of polarizabilities of the molecule. We show that in the perfect conductor limit for the plate the interaction is insensitive to the orientation of the polarizabilities of the molecule. We obtain the Casimir-Polder…
Electromagnetic waves propagation on either rotating or anisotropic spacetime backgrounds (such as Kerr and Gödel metrics, or Bianchi-I metric) produce a reduction of the magnitude of Casimir forces between plates. These curved spacetimes behave as chiral or birefringent materials producing dispersion of electromagnetic waves, in such a way that right- and left-circularly polarized light waves propagate with different phase velocities. Results are explicitly calculated for discussed cases. The difference on the wavevectors of the two polarized electromagnetic waves produces an abatement of a C…
As part of our program to develop the description of three-body effects in quantum vacuum phenomena, we study the three-body interaction of two anisotropically polarizable atoms with a perfect electrically conducting plate, a generalization of earlier work. Three- and four-scattering effects are important, and lead to nonmonotonic behavior.
In an attempt to understand a recently discovered torque anomaly in quantum field theory with boundaries, we calculate the Casimir energy and torque of a scalar field subject to Dirichlet boundary conditions on an annular sector defined by two coaxial cylinders intercut by two planes through the axis. In this model the particularly troublesome divergence at the cylinder axis does not appear, but new divergences associated with the curved boundaries are introduced. All the divergences associated with the volume, the surface area, the corners, and the curvature are regulated by point separation …
We derive upper and lower bounds on the Casimir--Polder force between an anisotropic dipolar body and a macroscopic body separated by vacuum via algebraic properties of Maxwell's equations. These bounds require only a coarse characterization of the system---the material composition of the macroscopic object, the polarizability of the dipole, and any convenient partition between the two objects---to encompass all structuring possibilities. We find that the attractive Casimir--Polder force between a polarizable dipole and a uniform planar semi-infinite bulk medium always comes within 10% of the …
