The problem with the temperature dependence of the Casimir force is investigated. Specifically, the entropy behavior in the low temperature limit, which caused debates in the literature, is analyzed. It is stressed that the behavior of the relaxation frequency in the $T\to0$ limit does not play a physical role since the anomalous skin effect dominates in this range. In contrast with the previous works, where the approximate Leontovich impedance was used for analysis of nonlocal effects, we give description of the problem in terms of exact nonlocal impedances. It is found that the Casimir entropy is going to zero at $T\to0$ only in the case when $s$ polarization does not contribute to the classical part of the Casimir force. However, the entropy approaching zero from the negative side that, in our opinion, cannot be considered as thermodynamically satisfactory. The resolution of the negative entropy problem proposed in the literature is analyzed and it is shown that it cannot be considered as complete. The crisis with the thermal Casimir effect is stressed.
We show that exact results are obtained for the calculation of Casimir forces between arbitrary materials using the concept of surface impedances, obtaining in a trivial way the force in the limit of perfect conductors and also Lifshitz formula in the limit of semi-infinite media. As an example we present a full and rigorous calculation of the Casimir force between two metallic half-spaces described by a hydrodynamic nonlocal dielectric response.
The impedance boundary condition is used to calculate the Casimir force in configurations of two parallel plates and a shpere (spherical lens) above a plate at both zero and nonzero temperature. The impedance approach allows one to find the Casimir force between the realistic test bodies regardless of the electromagnetic fluctuations inside the media. Although this approach is an approximate one, it has wider areas of application than the Lifshitz theory of the Casimir force. The general formulas of the impedance approach to the theory of the Casimir force are given and the formal substitution…
In a recent paper, Geyer, Klimchitskaya, and Mostepanenko [Phys. Rev. A 67, 062102 (2003); quant-ph/0306038] proposed the final solution of the problem of temperature correction to the Casimir force between real metals. The basic idea was that one cannot use the dielectric permittivity in the frequency region where a real current may arise leading to Joule heating of the metal. Instead, the surface impedance approach is proposed as a solution of all contradictions. The purpose of this comment is to show that (i) the main idea contradicts to the fluctuation dissipation theorem, (ii) the propose…
The surface impedance approach to the description of the thermal Casimir effect in the case of real metals is elaborated starting from the free energy of oscillators. The Lifshitz formula expressed in terms of the dielectric permittivity depending only on frequency is shown to be inapplicable in the frequency region where a real current may arise leading to Joule heating of the metal. The standard concept of a fluctuating electromagnetic field on such frequencies meets difficulties when used as a model for the zero-point oscillations or thermal photons in the thermal equilibrium inside metals.…
We compute the Casimir Energy of a spherical region using a Surface Impedance approach. We characterize the Surface Impedance of the boundary using plasma model. Exact analytical formulae are obtained by means of the zeta function regularization method and all the divergencies are explicitly computed. We find that it is possible to have negative Casimir energy for some range of values of the relevant parameter. Limits of applicability of the model are discussed.
We consider the three-body Casimir-Polder interaction between three atoms during their dynamical self-dressing. We show that the time-dependent three-body Casimir-Polder interaction energy displays nonlocal features related to quantum properties of the electromagnetic field and to the nonlocality of spatial field correlations. We discuss the measurability of this intriguing phenomenon and its relation with the usual concept of stationary three-body forces.
The surface impedance approach is discussed in connection with the precise calculation of the Casimir force between metallic plates. It allows to take into account the nonlocal connection between the current density and electric field inside of metals. In general, a material has to be described by two impedances $Z_{s}(ω,q)$ and $Z_{p}(ω,q)$ corresponding to two different polarization states. In contrast with the approximate Leontovich impedance they depend not only on frequency $ω$ but also on the wave vector along the plate $q$. In this paper only the nonlocal effects happening at frequencie…
The problem of nonlocality in the dynamical three-body Casimir-Polder interaction between an initially excited and two ground-state atoms is considered. It is shown that the nonlocal spatial correlations of the field emitted by the excited atom during the initial part of its spontaneous decay may become manifest in the three-body interaction. The observability of this new phenomenon is discussed.
The nonlocal response functions to quantum fluctuations are used to find asymptotic expressions for the Casimir free energy and entropy at arbitrarily low temperature in the configuration of two parallel metallic plates. It is shown that by introducing an alternative nonlocal response to the off-the-mass-shell fluctuations the Lifshitz theory is brought into agreement with the requirements of thermodynamics. According to our results, the Casimir entropy calculated using the nonlocal response functions, which take into account dissipation of conduction electrons, remains positive and monotonous…
he Casimir force is calculated between plates with thin metallic coating. Thin films are described with spatially dispersive (nonlocal) dielectric functions. For thin films the nonlocal effects are more relevant than for half-spaces. However, it is shown that even for film thickness smaller than the mean free path for electrons, the difference between local and nonlocal calculations of the Casimir force is of the order of a few tenths of a percent. Thus the local description of thin metallic films is adequate within the current experimental precision and range of separations.
We give a rigorous analytical derivation of low-temperature behavior of the Casimir entropy in the framework of the Lifshitz formula combined with the Drude dielectric function. An earlier result that the Casimir entropy at zero temperature is not equal to zero and depends on the parameters of the system is confirmed, i.e. the third law of thermodynamics (the Nernst heat theorem) is violated. We illustrate the resolution of this thermodynamical puzzle in the context of the surface impedance approach by several calculations of the thermal Casimir force and entropy for both real metals and diele…
The low-temperature asymptotic expressions for the Casimir interaction between two real metals described by Leontovich surface impedance are obtained in the framework of thermal quantum field theory. It is shown that the Casimir entropy computed using the impedance of infrared optics vanishes in the limit of zero temperature. By contrast, the Casimir entropy computed using the impedance of the Drude model attains at zero temperature a positive value which depends on the parameters of a system, i.e., the Nernst heat theorem is violated. Thus, the impedance of infrared optics withstands the ther…
Recently J.S. Hoye, I.Brevik, J.B. Aarseth, and K.A. Milton [Phys. Rev. E v.67, 056116 (2003); quant-ph/0212125] proposed that if the Lifshitz formula is combined with the Drude model, the transverse electric zero mode does not contribute to the result for real metals and there arises a linear temperature correction to the Casimir force at small temperatures. The authors claim that in spite of the fact that the Casimir entropy in their approach is negative, the Nernst heat theorem is satisfied. In the present Comment we show that the authors' conclusion regarding the Nernst heat theorem is in …
We extend the Lifshitz theory of the Casimir force to the case of two parallel magnetic metal plates possessing a spatially nonlocal dielectric response. By solving Maxwell equations in the configuration of an electromagnetic wave incident on the boundary plane of a magnetic metal semispace, the exact surface impedances are expressed in terms of its magnetic permeability and longitudinal and transverse dielectric functions. This allows application of the Lifshitz theory with reflection coefficients written via the surface impedances for calculation of the Casimir pressure between magnetic meta…
We investigate repulsive Casimir force between slabs containing left-handed materials with controllable electromagnetic properties. The sign of Casimir force is determined by the electric and magnetic properties of the materials, and it is shown that the formation of the repulsive force is related to the wave impedances of two slabs. The sign change of the Casimir force as a function of the distance is studied. Special emphasis is put on the restoring Casimir force which may be found to exist between perfectly conducting material and metamaterial slabs. This restoring force is a natural power …
It has been known that the Lifshitz theory of the Casimir force comes into conflict with the measurement data if the response of conduction electrons in metals to electromagnetic fluctuations is described by the well tested dissipative Drude model. The same theory is in a very good agreement with measurements of the Casimir force from graphene whose spatially nonlocal electromagnetic response is derived from the first principles of quantum electrodynamics. Here, we propose the spatially nonlocal phenomenological dielectric functions of metals which lead to nearly the same response, as the stan…
The applicability of the Lifshitz formula is discussed to the case of two thick parallel plates made of real metal. The usual description of the zero-point vacuum oscillations on the background of the frequency-dependent dielectric permittivity is shown to be in contradiction with thermodynamics. Instead, the Lifshitz formula for the Casimir free energy should be reformulated in terms of the reflection coefficients containing the surface impedance instead of the dielectric permittivity. This approach is presently confirmed experimentally by precision measurements of the van der Waals and Casim…
Transmission-line waveguides can mediate long-range fluctuation-induced forces between neutral objects. We present two approaches for the description of these forces between electric components embedded in transmission-line circuits. The first, following ordinary quantum electrodynamics (QED), consists of the quantization and scattering theory of voltage and current waves inside transmission lines. The second approach relies on a simple circuit analysis with additional noisy current sources due to resistors in the circuit, as per the fluctuation-dissipation theorem (FDT). We apply the latter a…
We calculate the corrections to the Casimir force between two metals due to the spatial dispersion of their response functions. We employ model-independent expressions for the force in terms of the optical coefficients. We express the non-local corrections to the Fresnel coefficients employing the surface $d_\perp$ parameter, which accounts for the distribution of the surface screening charge. Within a self-consistent jellium calculation, spatial dispersion increases the Casimir force significatively for small separations. The nonlocal correction has the opposite sign than previously predicted…
Temperature correction to the Casimir force is considered for real metals at low temperatures. With the temperature decrease the mean free path for electrons becomes larger than the field penetration depth. In this condition description of metals with the impedance of anomalous skin effect is shown to be more appropriate than with the permittivity. The effect is crucial for the temperature correction. It is demonstrated that in the zero frequency limit the reflection coefficients should coincide with those of ideal metal if we demand the entropy to be zero at T=0. All the other prescriptions d…
Dirichlet boundary conditions on a surface can be imposed on a scalar field, by coupling it quadratically to a $δ$-like potential, the strength of which tends to infinity. Neumann conditions, on the other hand, require the introduction of an even more singular term, which renders the reflection and transmission coefficients ill-defined because of UV divergences. We present a possible procedure to tame those divergences, by introducing a minimum length scale, related to the non-zero `width' of a {\em nonlocal} term. We then use this setup to reach (either exact or imperfect) Neumann conditions,…
We analyze the introduction of dissipative effects in the study of the dynamical Casimir effect. We consider a toy model for an electromagnetic cavity that contains a semiconducting thin shell, which is irradiated with short laser pulses in order to produce periodic oscillations of its conductivity. The coupling between the quantum field in the cavity and the microscopic degrees of freedom of the shell induces dissipation and noise in the dynamics of the field. We argue that the photon creation process should be described in terms of a damped oscillator with nonlocal dissipation and colored no…
The spatially nonlocal response functions are proposed which nearly coincide with the commonly used local response for electromagnetic fields and fluctuations on the mass shell, but differ significantly for the off-shell fluctuating field. It is shown that the fundamental Lifshitz theory using the suggested response functions comes to an agreement with the measurement data for the Casimir force without neglecting the dissipation of free electrons. We demonstrate that reflectances of the on-shell electromagnetic waves calculated using the nonlocal and commonly employed local responses differ on…
We present supplementary information on the recent indirect measurement of the Casimir pressure between two parallel plates using a micromachined oscillator. The equivalent pressure between the plates is obtained by means of the proximity force approximation after measuring the force gradient between a gold coated sphere and a gold coated plate. The data are compared with a new theoretical approach to the thermal Casimir force based on the use of the Lifshitz formula, combined with a generalized plasma-like dielectric permittivity which takes into account interband transitions of core electron…
We study the Casimir interaction energy due to the vacuum fluctuations of the Electromagnetic (EM) field in the presence of two mirrors, described by $2+1$-dimensional, generally nonlocal actions, which may contain both parity-conserving and parity-breaking terms. We compare the results with the ones corresponding to Chern-Simons boundary conditions, and evaluate the interaction energy for several particular situations.
We emphasize and demonstrate that, besides using the usual recursion relations involving successive layers, generalized Fresnel coefficients of a multilayer can equivalently be calculated using the recursion relations involving stacks of layers, as introduced some time ago [M. S. Tomas, Phys. Rev. A 51, 2545 (1995)]. Moreover, since the definition of the generalized Fresnel coefficients employed does not imply properties of the stacks, these nonstandard recursion relations can be used to calculate Fresnel coefficients not only for local systems but also for a general multilayer consisting of v…
The energy of fluctuating electromagnetic field is investigated for the thermal Casimir force acting between parallel plates made of real metal. It is proved that for nondissipative media with temperature independent dielectric permittivity the energy at nonzero temperature comprises of the (renormalized) energies of the zero-point and thermal photons. In this manner photons can be considered as collective elementary excitations of the matter of plates and electromagnetic field. If the dielectric permittivity depends on temperature the energy contains additional terms proportional to the deriv…
In this paper we theoretically demonstrate the tunability of the Casimir force both in sign and magnitude between parallel plates coated with dispersive materials. We show that this force, existing between uncharged plates, can be tuned by carefully choosing the value of the plasma frequency (i.e., the epsilon-near-zero frequency) of the coating in the neighborhood of the resonance frequency of the cavity. The coating layer enables a continuous variation of the force between four limiting values when a coating is placed on each plate. We explore the consequences of such variation when pairs of…
The temperature dependence of the Casimir force between a real metallic plate and a metallic sphere is analyzed on the basis of optical data concerning the dispersion relation of metals such as gold and copper. Realistic permittivities imply, together with basic thermodynamic considerations, that the transverse electric zero mode does not contribute. This results in observable differences with the conventional prediction, which does not take this physical requirement into account. The results are shown to be consistent with the third law of thermodynamics, as well as being consistent with curr…
Recently the Casmir-Polder force felt by an atom near a substrate under nonequilibrium stationary conditions has been studied theoretically with macroscopic quantum electrodyanamics (MQED) and verified experimentally with cold atoms. We give a quantum field theory derivation of the Langevin equation describing the atom's motion based on the influence functional method valid for fully nonequilibrium (nonstationary) conditions. The noise associated with the quantum field derived from first principles is generally colored and nonlocal, which is at variance with the `local source hypothesis' of MQ…
We apply the derivative expansion approach to the Casimir effect for a real scalar field in $d$ spatial dimensions, to calculate the next to leading order term in that expansion, namely, the first correction to the proximity force approximation. The field satisfies either Dirichlet or Neumann boundary conditions on two static mirrors, one of them flat and the other gently curved. We show that, for Dirichlet boundary conditions, the next to leading order term in the Casimir energy is of quadratic order in derivatives, regardless of the number of dimensions. Therefore it is local, and determined…
Starting from the Lifshitz formula for the Casimir force between parallel plates we calculate the difference between the forces at two different settings, one in which the temperature is $T_1=350$ K, the other when $T_2=300$ K. As material we choose gold, and make use of the Drude dispersion relation. Our results, which are shown graphically, should be directly comparable to experiment. As an analogous calculation based upon the plasma dispersion relation leads to a different theoretical force difference, an experiment of this kind would be a decisive test. We also present an analogous calcula…
The effect of edges and apertures on the Casimir energy of an arrangement of plates and boundaries can be calculated in terms of an effective nonlocal lower-dimensional field theory that lives on the boundary. This formalism has been developed in a number of previous papers and applied to specific examples with Dirichlet boundary conditions. Here we generalize the formalism to arbitrary boundary conditions. As a specific example, the geometry of a flat plate and a half-plate placed parallel to it is considered for a number of different boundary conditions and the area-dependent and edge depend…
The problem of thermal Casimir force, which consists in disagreement of theoretical predictions of the fundamental Lifshitz theory with the measurement data of high precision experiments and some peculiar properties of the Casimir entropy, is reviewed. We discuss different approaches to the resolution of this problem proposed in the literature during the last twenty years. Particular attention is given to the role of the effects of spatial dispersion. The recently suggested nonlocal Drude-like permittivities which take proper account of the dissipation of conduction electrons and bring the pre…
Dynamical Casimir effect of the optomechanical cavity interacting with one-dimensional photonic crystal is theoretically investigated in terms of the complex spectral analysis of Floquet-Liouvillian in the symplectic-Floquet space. The quantum vacuum fluctuation of the intra-cavity mode is parametrically amplified by a periodic motion of the mirror boundary, and the amplified photons are spontaneously emitted to the photonic band. We have derived the non-Hermitian effective Floquet-Liouvillian from the total system Liouvillian with the use of the Brillouin-Wigner-Feshbach projection method in …
It is well known that, beginning in 2000, the behavior of the thermal correction to the Casimir force between real metals has been hotly debated. As was shown by several research groups, the Lifshitz theory, which provides the theoretical foundation for the calculation of both the van der Waals and Casimir forces, leads to different results depending on the model of metal conductivity used. To resolve these controversies, the theoretical considerations based on the principles of thermodynamics and new experimental tests were invoked. We analyze the present status of the problem (in particular,…
The prototypical Casimir effect arises when a scalar field is confined between parallel Dirichlet boundaries. We study corrections to this when the boundaries themselves have apertures and edges. We consider several geometries: a single plate with a slit in it, perpendicular plates separated by a gap, and two parallel plates, one of which has a long slit of large width, related to the case of one plate being semi-infinite. We develop a general formalism for studying such problems, based on the wavefunctional for the field in the gap between the plates. This formalism leads to a lower dimension…
We report an improved dynamic determination of the Casimir pressure between two plane plates obtained using a micromachined torsional oscillator. The main improvements in the current experiment are a significant suppression of the surface roughness of the Au layers deposited on the interacting surfaces, and a decrease in the experimental error in the measurement of the absolute separation. A metrological analysis of all data permitted us to determine both the random and systematic errors, and to find the total experimental error as a function of separation at the 95% confidence level. In contr…
The Lifshitz formula for the dispersive forces is generalized to the materials, which cannot be described with the local dielectric response. Principal nonlocality of poor conductors is related with the finite screening length of the penetrating field and the collisional relaxation; at low temperatures the role of collisions plays the Landau damping. The spatial dispersion makes the theory self consistent. Our predictions are compared with the recent experiment. It is demonstrated that at low temperatures the Casimir-Lifshitz entropy disappears as $T$ in the case of degenerate plasma and as $T…
