Pervez Hoodbhoy
In the presence of an external field, the imposition of specific boundary conditions can lead to interesting new manifestations of the Casimir effect. In particular, it is shown here that even a single conducting plate may experience a non-zero force due to vacuum fluctuations. The origins of this force lie in the change induced by the external potential in the density of available quantum states.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
We examine recent prescriptions for estimating the thermal Casimir force between two metallic plates from the point of view of their consistency with the Bohr-van Leeuwen theorem of classical statistical physics. We find that prescriptions including the effect of ohmic dissipation satisfy the theorem, while prescriptions that neglect ohmic dissipation do not.
We combine linear response theory and dimensional regularization in order to derive the dynamical Casimir force in the low frequency regime. We consider two parallel plates moving along the normal direction in $D-$dimensional space. We assume the free-space values for the mass of each plate to be known, and obtain finite, separation-dependent mass corrections resulting from the combined effect of the two plates. The global mass correction is proportional to the static Casimir energy, in agreement with Einstein's law of equivalence between mass and energy for stressed rigid bodies.
Quasiperiodic arrangement of magnetodielectric $δ$-plates: Green's functions and Casimir energies for $N$ bodies
本文将卡西米尔能量计算从标量场推广到电磁场，研究由N个磁介电δ-板构成的有限准周期排列，发现量子真空压力可使板堆膨胀或收缩，并推导了相应的类Faddeev方程。
Casimir energy of $N$ magnetodielectric $δ$-function plates
本文通过多重散射形式和图解环方法，将卡西米尔能量密度推广到任意 $N$ 个磁介电 $\delta$-函数板，揭示了依赖参数 $\Delta$ 的最近邻与次近邻散射贡献。
We present boundary conditions for the electromagnetic fields on a δ-function plate, having both electric and magnetic properties, sandwiched between two magneto-electric semi-infinite half spaces. The optical properties for an isolated δ-function plate are shown to be independent of the longitudinal material properties of the plate. The Casimir-Polder energy between an isotropically polarizable atom and a magneto-electric δ-function plate is attractive for a purely electric δ-function plate, repulsive for a purely magnetic δ-function plate, and vanishes for the simultaneous perfect conductor …
In this work, we consider the Casimir effect due to massless fermionic fields in the presence of long cylinders. More precisely, we consider the interaction between a cylinder parallel to a plate, between two parallel cylinders outside each other, and between a cylinder lying parallelly inside another cylinder. We derive the explicit formulas for the Casimir interaction energies and compute the leading and the next-to-leading order terms of the small separation asymptotic expansions. As expected, the leading order terms coincide with the proximity force approximations. We compare the results o…
We study the Casimir energy of a massless scalar field that obeys Dirichlet boundary conditions on a hyperboloid facing a plate. We use the optical approximation including the first six reflections and compare the results with the predictions of the proximity force approximation and the semi-classical method. We also consider finite size effects by contrasting the infinite with a finite plate. We find sizable and qualitative differences between the new optical method and the more traditional approaches.
The electromagnetic vacuum energy is considered in the presence of a perfectly conducting plane and a ball with dielectric permittivity $\varepsilon$ and magnetic permeability $μ$, $μ\ne1$. The attention is focused on the Casimir repulsion in this system caused by magnetic permeability of the sphere. In the case of perfectly permeable sphere, $μ=\infty$, the vacuum energy is estimated numerically. The short and long distance asymptotes corresponding to the repulsive force and respective low temperature corrections and high temperature limits are found for a wide range of $μ$. The constraints o…
We study the interplay of thermal and diffractive effects in Casimir energies. We consider plates with edges, oriented either parallel or perpendicular to each other, as well as a single plate with a slit. We compute the Casimir energy at finite temperature using a formalism in which the diffractive effects are encoded in a lower dimensional non-local field theory that lives in the gap between the plates. The formalism allows for a clean separation between direct or geometric effects and diffractive effects, and makes an analytic derivation of the temperature dependence of the free energy poss…
We investigate the nontrivial interplay between geometry and temperature in the Casimir effect for the sphere-plate and cylinder-plate configurations. At low temperature, the thermal contribution to the Casimir force is dominated by this interplay, implying that standard approximation techniques such as the PFA are inapplicable even in the limit of small surface separation. Thermal fluctuations on scales of the thermal wavelength lead to a delocalization of the thermal force density at low temperatures. As a consequence, the temperature dependence strongly differs from naive expectations. Most…
We study the finite temperature Casimir interaction between a cylinder and a plate using the exact formula derived from the Matsubara representation and the functional determinant representation. We consider the scalar field with Dirichlet and Neumann boundary conditions. The asymptotic expansions of the Casimir energy and the Casimir force when the separation $a$ between the cylinder and the plate is small are derived. As in the zero temperature case, it is found that the leading terms of the Casimir energy and the Casimir force agree with those derived from the proximity force approximation …
We study the Casimir effect for scalar fields with general curvature coupling subject to mixed boundary conditions $(1+β_{m}n^μ\partial_μ)ϕ=0$ at $x=a_{m}$ on one ($m=1$) and two ($m=1,2$) parallel plates at a distance $a\equiv a_{2}-a_{1}$ from each other. Making use of the generalized Abel-Plana formula previously established by one of the authors \cite{Sahrev}, the Casimir energy densities are obtained as functions of $β_{1}$ and of $β_{1}$,$β_{2}$,$a$, respectively. In the case of two parallel plates, a decomposition of the total Casimir energy into volumic and superficial contributions is…
We provide further evidence for the nontrivial interplay between geometry and temperature in the Casimir effect. We investigate the temperature dependence of the Casimir force between an inclined semi-infinite plate above an infinite plate in D dimensions using the worldline formalism. Whereas the high-temperature behavior is always found to be linear in T in accordance with dimensional-reduction arguments, different power-law behaviors at small temperatures emerge. Unlike the case of infinite parallel plates, which shows the well-known T^D behavior of the force, we find a T^{D-1} behavior for…
We study the Casimir energy due to a quantum real scalar field coupled to two planar, infinite, zero-width, parallel mirrors with non-homogeneous properties. These properties are represented, in the model we use, by scalar functions defined on each mirror's plane. Using the Gelfand-Yaglom's theorem, we construct a Lifshitz-like formula for the Casimir energy of such a system. Then we use it to evaluate the energy perturbatively, for the case of almost constant scalar functions, and also implementing a Derivative Expansion, under the assumption that the spatial dependence of the properties is s…
The Casimir effect continues to be a subject of discussion regarding its relationship, or the lack of it, with the vacuum energy of fluctuating quantum fields. In this note, we propose a Gedankenexperiment considering an imaginary process similar to a vacuum fluctuation in a typical static Casimir set up. The thought experiment leads to intriguing conclusions regarding the minimum distance between the plates when approaching the Planck scale. More specifically, it is found that distance between the plates cannot reach a value below $(L/L_P)^{2/3}$ Planck lengths, being $L_P$ the Planck length …
The Casimir pressure is calculated between parallel metal plates, containing the materials Au, Cu, or Al. Our motivation for making this calculation is the need of comparing theoretical predictions, based on the Lifshitz formula, with experiments that are becoming gradually more accurate. In particular, the finite temperature correction is considered, in view of the recent discussion in the literature on this point. A special attention is given to the case where the difference between the Casimir pressures at two different temperatures, T=300 K and T=350 K, is involved. This seems to be a case…
The prototypical Casimir effect arises when a scalar field is confined between parallel Dirichlet boundaries. We study corrections to this when the boundaries themselves have apertures and edges. We consider several geometries: a single plate with a slit in it, perpendicular plates separated by a gap, and two parallel plates, one of which has a long slit of large width, related to the case of one plate being semi-infinite. We develop a general formalism for studying such problems, based on the wavefunctional for the field in the gap between the plates. This formalism leads to a lower dimension…
We consider vacuum fluctuations of the quantum electromagnetic field in the presence of an infinite and perfectly conducting plate. We evaluate how the change of vacuum fluctuations due to the plate modifies the Casimir-Polder potential between two atoms placed near the plate. We use two different methods to evaluate the Casimir-Polder potential in the presence of the plate. They also give new insights on the role of boundary conditions in the Casimir-Polder interatomic potential, as well as indications for possible generalizations to more complicated boundary conditions.
We find the exact Casimir force between a plate and a cylinder, a geometry intermediate between parallel plates, where the force is known exactly, and the plate--sphere, where it is known at large separations. The force has an unexpectedly weak decay \sim L/(H^3 \ln(H/R)) at large plate--cylinder separations H (L and R are the cylinder length and radius), due to transverse magnetic modes. Path integral quantization with a partial wave expansion additionally gives a qualitative difference for the density of states of electric and magnetic modes, and corrections at finite temperatures.
We report stronger constraints on the parameters of Yukawa-type corrections to Newtonian gravity from measurements of the lateral Casimir force between sinusoidally corrugated surfaces of a sphere and a plate. In the interaction range from 1.6 to 14 nm the strengthening of previously known high confidence constraints up to a factor of $2.4\times 10^7$ is achieved using these measurements. It is shown that the replacement of a plane plate with a corrugated one in the measurements of the normal Casimir force by means of an atomic force microscope would result in the strengthening of respective h…
We evaluate the renormalized vacuum expectation values (VEVs) of electric and magnetic fields squared and the energy-momentum tensor for the electromagnetic field in the geometry of two parallel conducting plates on background of cosmic string spacetime. On the base of these results, the Casimir-Polder force on a polarizable particle and the Casimir forces acting on the plates are investigated. The VEVs are decomposed into the pure string and plate-induced parts. The VEV of the electric field squared is negative for points with radial distance to the string smaller than the distance to the pla…
The Casimir force between two parallel plates separated by anisotropic media is investigated. We theoretically calculate the Casimir force between two parallel plates when the interspace between the plates is filled with anisotropic media. Our result shows that the anisotropy of the material between the plates can significantly affect the Casimir force, especially the direction of the force. If ignoring the anisotropy of the in-between material makes the force to be repulsive (attractive), by contrast, taking the anisotropy into account may produce an extra attractive (repulsive) force. The ph…
We argue that the appropriate variable to study a non trivial geometry dependence of the Casimir force is the lateral component of the Casimir force, which we evaluate between two corrugated metallic plates outside the validity of the Proximity Force Approximation (PFA). The metallic plates are described by the plasma model, with arbitrary values for the plasma wavelength, the plate separation and the corrugation period, the corrugation amplitude remaining the smallest length scale. Our analysis shows that in realistic experimental situations the Proximity Force Approximation overestimates the…
In this paper aiming to obtain the Casimir energy between a sinusoidally corrugated sphere and a plate, we first present a derivation of the sphere-plate Casimir force obtained by applying proximity force approximation (PFA). One may investigate this problem by using the scattering matrix method. Despite that this method achieves the exact result, but difficulties of applying this formalism make the procedure complicated. We use the PFA to achieve the purpose in a truly explicit manner. Considering the sphere to have different kinds of sinusoidally corrugations, we obtain the effect of deforma…
We make remarks on Hoodbhoy's paper [J. Phys. A: Math. Gen. 38 (2005) 10253-10256] by pointing out the single plate considered could be elastic and there will be deformations once the net (one-sided) force being upon the plate which will change the position-dependent potential imposed by Hoodbhoy.
The Casimir energy is evaluated for massless scalar fields under Dirichlet or Neumann boundary conditions, and for the electromagnetic field with perfect conductor boundary conditions on one and two infinite parallel plates moving by uniform proper acceleration through the Fulling--Rindler vacuum in an arbitrary number of spacetime dimension. For the geometry of a single plate the both regions of the right Rindler wedge, (i) on the right (RR region) and (ii) on the left (RL region) of the plate are considered. The zeta function technique is used, in combination with contour integral representa…
The zero-temperature Casimir-Lifshitz force between two plates moving parallel to each other at arbitrary constant speed was found in [New J. Phys. 11, 033035 (2009)]. The solution is here generalized to the case where the plates are at different temperatures. The Casimir-Lifshitz force is obtained by calculating the electromagnetic stress tensor, using the method employed by Antezza et al. [Phys. Rev. A 77, 022901 (2008)] for non-moving plates at different temperatures. The perpendicular force on the plates has contributions from the quantum vacuum and from the thermal radiation; both of thes…
We study the lateral Casimir force between corrugated dielectric plates. We use the dielectric contrast perturbation theory [R. Golestanian, {\it Phys. Rev. Lett.} {\bf 95}, 230601, (2005)], which allows us to consider arbitrary deformations with large amplitudes. We consider sinusoidal, rectangular, and sawtooth corrugations, for samples made of silicon and gold. We use the plasma and Drude-Lorentz models for the permittivity of gold and silicon, respectively. For these geometries and materials, the lateral Casimir force is {\it not} a sinusoidal function of the relative lateral displacement …
We investigate in detail the Casimir torque induced by quantum vacuum fluctuations between two nanostructured plates. Our calculations are based on the scattering approach and take into account the coupling between different modes induced by the shape of the surface which are neglected in any sort of proximity approximation or effective medium approach. We then present an experimental setup aiming at measuring this torque.
We recently proposed a new approach to the Casimir effect based on classical ray optics (the "optical approximation"). In this paper we show how to use it to calculate the local observables of the field theory. In particular we study the energy-momentum tensor and the Casimir pressure. We work three examples in detail: parallel plates, the Casimir pendulum and a sphere opposite a plate. We also show how to calculate thermal corrections, proving that the high temperature `classical limit' is indeed valid for any smooth geometry.
We find the low-temperature behavior of the Casimir-Polder free energy for a polarizable and magnetizable atom interacting with a plate made of ferromagnetic dielectric material. It is shown that the corresponding Casimir-Polder entropy goes to zero with vanishing temperature, i.e., the Nernst heat theorem is satisfied, if the dc conductivity of the plate material is disregarded in calculations. If the dc conductivity is taken into account, the Nernst theorem is violated. These results are discussed in light of recent experiments.
Barash has calculated the Casimir forces between parallel birefringent plates with optical axes parallel to the plate boundaries [Izv. Vyssh. Uchebn.\ Zaved., Radiofiz., {\bf 12}, 1637 (1978)]. The interesting new feature of the solution compared to the case of isotropic plates is the existence of a Casimir torque which acts to line up the optical axes if they are not parallel or perpendicular. The forces were found from a calculation of the Helmholtz free energy of the electromagnetic field. Given the length of the calculations in this problem and hopes of an experimental measurement of the t…
We apply the generalized zeta function method to compute the Casimir energy and pressure between an unusual pair of parallel plates at finite temperature, namely: a perfectly conducting plate and an infinitely permeable one. The high and low temperature limits of these quantities are discussed; relationships between high and low temperature limits are estabkished by means of a modified version of the temperature inversion symmetry.
We study the Casimir interaction between perfectly conducting sphere and plate in the classical limit of high temperatures. By taking the small-distance expansion of the exact scattering formula, we compute the leading correction to the Casimir energy beyond the commonly employed proximity force approximation. We find that for a sphere of radius $R$ at distance $d$ from the plate the correction is of the form $\ln^2 (d/R)$, in agreement with indications from recent large-scale numerical computations. We develop a fast-converging numerical scheme for computing the Casimir interaction to high pr…
In this paper we correct a previously obtained expression for the Casimir-Lifshitz attraction force (Dedkov, Kyasov, Surf. Sci., 2010) in a system of two parallel plates in relative nonrelativistic motion, assuming the total thermal equilibrium of the system.
We consider two parallel corrugated plates and show that a Casimir torque arises when the corrugation directions are not aligned. We follow the scattering approach and calculate the Casimir energy up to second order in the corrugation amplitudes, taking into account nonspecular reflections, polarization mixing and the finite conductivity of the metals. We compare our results with the proximity force approximation, which overestimates the torque by a factor 2 when taking the conditions that optimize the effect. We argue that the Casimir torque could be measured for separation distances as large…
The Casimir force between two metallic plates is affected by their roughness state. This effect is usually calculated through the so-called `proximity force approximation' which is only valid for small enough wavevectors in the spectrum of the roughness profile. We introduce here a more general description with a wavevector-dependent roughness sensitivity of the Casimir effect. Since the proximity force approximation underestimates the effect, a measurement of the roughness spectrum is needed to achieve the desired level of accuracy in the theory-experiment comparison.
It has been demonstrated, using variational methods, that quantum vacuum energy gravitates according to the equivalence principle, at least for the finite Casimir energies associated with perfectly conducting parallel plates. This conclusion holds independently of the orientation of the plates. We review these arguments and add further support to this conclusion by considering parallel semitransparent plates, that is, $δ$-function potentials, acting on a massless scalar field, in a spacetime defined by Rindler coordinates. We calculate the force on systems consisting of one or two such plates …
Quantum fluctuations of the electromagnetic field in the medium surrounding two discharged macroscopic polarizable bodies induce a force between the two bodies, the so called Casimir force. In the last two decades many experiments have accurately measured this force, and significant efforts are made to harness it in the actuation of micro and nano machines. The inherent many body character of the Casimir force makes its computation very difficult in non-planar geometries, like the standard experimental sphere-plate configuration. Here we derive an approximate semi-analytic formula for the sphe…
We apply a perturbative approach to evaluate the Casimir energy for a massless real scalar field in 3+1 dimensions, subject to Dirichlet boundary conditions on two surfaces. One of the surfaces is assumed to be flat, while the other corresponds to a small deformation, described by a single function $η$, of a flat mirror. The perturbative expansion is carried out up to the fourth order in the deformation $η$, and the results are applied to the calculation of the Casimir energy for corrugated mirrors in front of a plane. We also reconsider the proximity force approximation within the context of …
We measured the gradient of the Casimir force between an Au sphere and a plate made of ferromagnetic metal (Ni). It is demonstrated that the magnetic properties influence the force magnitude. This opens prospective opportunities for the control of the Casimir force in nanotechnology and for obtaining Casimir repulsion by using ferromagnetic dielectrics.
We propose a new theory of thermal Casimir effect, holding for the experimentally important case of metallic surfaces with a roughness having a spatial scale smaller than the skin depth. The theory is based on a simple phenomenological model for a rough conductor, that explicitly takes account of the fact that ohmic conduction in the immediate vicinity of the surface of a conductor is much impeded by surface roughness, if the amplitude of roughness is smaller than the skin depth. As a result of the new model, we find that surface roughness strongly influences the magnitude of the thermal corre…
We calculate the Casimir force between two parallel ideal metal plates when there is an intervening chiral medium present. Making use of methods of quantum statistical mechanics we show how the force can be found in a simple and compact way. The expression for the force is in agreement with that obtained recently by Q.-D. Jiang and F. Wilczek [Phys. Rev. B {\bf 99}, 125403 (2019)], in their case with the use of Green function methods.
We compute Casimir forces in open geometries with edges, involving parallel as well as perpendicular semi-infinite plates. We focus on Casimir configurations which are governed by a unique dimensional scaling law with a universal coefficient. With the aid of worldline numerics, we determine this coefficient for various geometries for the case of scalar-field fluctuations with Dirichlet boundary conditions. Our results facilitate an estimate of the systematic error induced by the edges of finite plates, for instance, in a standard parallel-plate experiment. The Casimir edge effects for this cas…
Using a recently developed theory of the Casimir force (Raabe C and Welsch D-G 2005 Phys. Rev. A 71 013814), we calculate the force that acts on a plate in front of a planar wall and the force that acts on the plate in the case where the plate is part of matter that fills the space in front of the wall. We show that in the limit of a dielectric plate whose permittivity is close to unity, the force obtained in the former case reduces to the ordinary, i.e., unscreened Casimir-Polder force acting on isolated atoms. In the latter case, the theory yields the Casimir-Polder force that is screened by…
We discuss non-equilibrium extensions of the Casimir force (due to electromagnetic fluctuations), where the objects as well as the environment are held at different temperatures. While the formalism we develop is quite general, we focus on a sphere in front of a plate, as well as two spheres, when the radius is small compared to separation and thermal wavelengths. In this limit the forces can be expressed analytically in terms of the lowest order multipoles, and corroborated with results obtained by diluting parallel plates of vanishing thickness. Non-equilibrium forces are generally stronger …
We study the system of a massive fermion field confined between two parallel plates, where the properties of both plates are discussed under chiral MIT boundary conditions. We investigate the effects of the chiral angle on the Casimir energy for a massive fermion field with the general momentum. We find that the Casimir energy as a function of the chiral angle is generally symmetric, and the attractive Casimir force in the chiral case is stronger than that in the nonchiral case. In addition, we investigate the approximate Casimir energy for light and heavy mass cases. The behavior of the discr…
Two-point functions, the mean field squared and the vacuum expectation value (VEV) of the energy-momentum tensor are investigated for the electromagnetic field in the geometry of parallel plates on background of $(D+1)$% -dimensional dS spacetime. We assume that the field is prepared in the Bunch-Davies vacuum state and on the plates a boundary condition is imposed that is a generalization of the perfectly conducting boundary condition for an arbitrary number of spatial dimensions. It is shown that for $D\geq 4$ the background gravitational field essentially changes the behavior of the VEVs at…
On Casimir force between two real metallic plates
本文针对真实金属板间卡西米尔力的修正问题，采用多种介电模型研究有限温度下的力修正，分析利夫希茨公式的围道积分遗漏问题，给出近远区结果并验证一阶修正的一致性。
We investigate the Casimir force between a microfabricated elliptic cylinder (cylindrical lens) and a plate made of real materials. After a brief discussion of the fabrication procedure, which typically results in elliptic rather than circular cylinders, the Lifshitz-type formulas for the Casimir force and for its gradient are derived. In the specific case of equal semiaxes, the resulting formulas coincide with those derived previously for circular cylinders. The nanofabrication procedure may also result in asymmetric cylindrical lenses obtained from parts of two different cylinders, or rotate…
For the first time, we have studied the impact of magnetic polarizability of a neutral metallic particle on the dynamical Casimir-Polder force, when the particle is uniformly moving with relativistic velocity parallel to the surface of an ideally conducting plate. The material properties of particle are taken into account within the Drude model approach.
Nonequilibrium Casimir pressure for two graphene-coated plates: Quantum field theoretical approach
针对一片板温偏离环境的平行石墨烯涂层板系统，基于狄拉克模型极化张量描述石墨烯电磁响应，揭示非平衡卡西米尔压力与平衡态的幅值差异，指出空间局域理论对非平衡效应的低估规律并讨论应用。
It has been demonstrated that quantum vacuum energy gravitates according to the equivalence principle, at least for the finite Casimir energies associated with perfectly conducting parallel plates. We here add further support to this conclusion by considering parallel semitransparent plates, that is, delta-function potentials, acting on a massless scalar field, in a spacetime defined by Rindler coordinates (tau,x,y,xi). Fixed xi in such a spacetime represents uniform acceleration. We calculate the force on systems consisting of one or two such plates at fixed values of xi. In the limit of larg…
The low-temperature behavior of the Casimir-Polder free energy and entropy for an atom near a dielectric plate are found on the basis of the Lifshitz theory. The obtained results are shown to be thermodynamically consistent if the dc conductivity of the plate material is disregarded. With inclusion of dc conductivity, both the standard Lifshitz theory (for all dielectrics) and its generalization taking into account screening effects (for a wide range of dielectrics) violate the Nernst heat theorem. The inclusion of the screening effects is also shown to be inconsistent with experimental data o…
We study the Casimir pressure between two similar plates of finite thickness kept at different temperatures in the case when the dielectric permittivity of the plates depends on temperature. It is suggested to consider the dielectric permittivity at two different temperatures as the permittivities of two dissimilar bodies, thus allowing to apply the theory of Casimir forces out of thermal equilibrium developed earlier in the literature. Following this approach, we show that, in addition to the equilibrium contribution to the nonequilibrium Casimir pressure, a proper nonequilibrium contribution…
On the Lorentz Boosted Parallel Plate Casimir Cavity
本文利用电磁场关联子研究洛伦兹助推下平行板卡西米尔腔的应力-能量张量，证明发散项在助推参考系中自动抵消并得到有限结果。
We evaluate the Casimir energy and force for a massive scalar field with general curvature coupling parameter, subject to Robin boundary conditions on two codimension-one parallel plates, located on a $(D+1)$-dimensional background spacetime with an arbitrary internal space. The most general case of different Robin coefficients on the two separate plates is considered. With independence of the geometry of the internal space, the Casimir forces are seen to be attractive for special cases of Dirichlet or Neumann boundary conditions on both plates and repulsive for Dirichlet boundary conditions o…
Casimir energy for $N$ constant conductivity $δ$-plates with a neural network perception
本文将$N$个$δ$板的多重散射分解为近邻与次近邻贡献，研究恒定电导率多板及理想磁导体情形的卡西米尔能量，并用神经网络识别Boyer排斥构型中的吸引与排斥区域。
Recent work by Jaffe and Scardicchio has expressed the optical approximation to the Casimir effect as a sum over geometric quantities. The first two authors have developed a technique which uses the complex geometry of the space of oriented affine lines in ${\Bbb{R}}^3$ to describe reflection of rays off a surface. This allows the quantities in the optical approximation to the Casimir effect to be calculated. To illustrate this we determine explicitly and in closed form the geometric optics approximation of the Casimir force between two non-parallel plates. By making one of the plates finite w…
The multiple scattering formalism is used to extract irreducible N-body parts of Green's functions and Casimir energies describing the interaction of N objects that are not necessarily mutually disjoint. The irreducible N-body scattering matrix is expressed in terms of single-body transition matrices. The irreducible N-body Casimir energy is the trace of the corresponding irreducible N-body part of the Green's function. This formalism requires the solution of a set of linear integral equations. The irreducible three-body Green's function and the corresponding Casimir energy of a massless scala…
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。