We try to minimize the number of qubits needed to factor an integer of n bits using Shor's algorithm on a quantum computer. We introduce a circuit which uses 2n+3 qubits and O(n^3 lg(n)) elementary quantum gates in a depth of O(n^3) to implement the factorization algorithm. The circuit is computable in polynomial time on a classical computer and is completely general as it does not rely on any property of the number to be factored.
Keywords: Factorization, quantum circuits, modular arithmetics
The quantum circuit model allows gates between any pair of qubits yet physical instantiations allow only limited interactions. We address this problem by providing an interaction graph together with an efficient method for compiling quantum circuits so that gates are applied only locally. The graph requires each qubit to interact with 4 other qubits and yet the time-overhead for implementing any n-qubit quantum circuit is 6 log n. Building a network of quantum computing nodes according to this graph enables the network to emulate a single monolithic device with minimal overhead.
A number of commercially available quantum computers, such as those based on trapped-ion or superconducting qubits, can now perform mid-circuit measurements and resets. In addition to being crucial for quantum error correction, this capability can help reduce the number of qubits needed to execute many types of quantum algorithms by measuring qubits as early as possible, resetting them, and reusing them elsewhere in the circuit. In this work, we introduce the idea of qubit-reuse compilation, which takes as input a quantum circuit and produces as output a compiled circuit that requires fewer qu…
We describe quantum circuits generating four-qubit maximally entangled states, the amount of entanglement being quantified by using the absolute value of the Cayley hyperdeterminant as an entanglement monotone. More precisely, we show that this type of four-qubit entangled states can be obtained by the action of a family of CNOT circuits on some special states of the LU orbit of the state |0000 >.
We consider four-dimensional qudits as qubit pairs and their qudit Pauli operators as qubit Clifford operators. This introduces a nesting, $C_1^2 \subset C_2^4 \subset C_3^2$, where $C_n^m$ is the $n$th level of the $m$-dimensional qudit Clifford hierarchy. If we can convert between logical qubits and qudits, then qudit Clifford operators are qubit non-Clifford operators. Conversion is achieved by qubit fusion and qudit fission using stabilizer circuits that consume a resource state. This resource is a fused qubit stabilizer state with a fault-tolerant state preparation using stabilizer circui…
In this paper, we present Clifford+T gates based quantum circuit design of integer division having $n$ ancillary qubits. The proposed quantum circuit is based on restoring division algorithm. The proposed quantum circuit of integer division consists of (i) quantum circuitry of conditional addition operation, (ii) quantum circuitry of integer subtraction. To design ancillary and T-count optimized design of quantum integer division, the optimized quantum circuit design of integer conditional addition operation and integer subtraction are presented. The proposed quantum integer division circuitry…
Although near-term quantum computing devices are still limited by the quantity and quality of qubits in the so-called NISQ era, quantum computational advantage has been experimentally demonstrated. Moreover, hybrid architectures of quantum and classical computing have become the main paradigm for exhibiting NISQ applications, where low-depth quantum circuits are repeatedly applied. In order to further scale up the problem size solvable by the NISQ devices, it is also possible to reduce the number of physical qubits by "cutting" the quantum circuit into different pieces. In this work, we experi…
We propose a theory of characterizing quantum circuits with qubit functional configurations. Any quantum circuit can be decomposed into alternating sequences of 1-qubit unitary gates and CNOT gates. Each CNOT sequence prepares the current quantum state into a layer of qubit functional configuration to specify the rule for the next 1-qubit unitary sequence on how to collectively modify the state vector entries. All the functional configuration layers on a quantum circuit define its type which can include many other circuits sharing the same configuration layers. Studying the functional configur…
How to implement quantum oracle with limited resources raises concerns these days. We design two ancilla-adjustable and efficient algorithms to synthesize SAT-oracle, the key component in solving SAT problems. The previous work takes 2m-1 ancillary qubits and O(m) elementary gates to synthesize an m clauses oracle. The first algorithm reduces the number of ancillary qubits to 2\sqrt{m}, with at most an eightfold increase in circuit size. The number of ancillary qubits can be further reduced to 3 with a quadratic increase in circuit size. The second algorithm aims to reduce the circuit depth. B…
Classical simulations of quantum circuits are limited in both space and time when the qubit count is above 50, the realm where quantum supremacy reigns. However, recently, for the low depth circuit with more than 50 qubits, there are several methods of simulation proposed by teams at Google and IBM. Here, we present a scheme of simulation which can extract a large amount of measurement outcomes within a short time, achieving a 64-qubit simulation of a universal random circuit of depth 22 using a 128-node cluster, and 56- and 42-qubit circuits on a single PC. We also estimate that a 72-qubit ci…
Understanding how a stabilizer circuit responds to different input is important to formulating an effective strategy for resource management. In this paper, we further investigate the many ways of using stabilizer operations to generate a single qubit output from a two-qubit state. In particular, by restricting the input to certain product states, we discover probabilistic operations capable of transforming stabilizer circuit outputs back into stabilizer circuit inputs. These secondary operations are ideally suited for recovery purposes and require only one extra resource ancilla to succeed. A…
Each platonic solid defines a single-qubit positive operator valued measure (POVM) by interpreting its vertices as points on the Bloch sphere. We construct simple circuits for implementing this kind of measurements and other simple types of symmetric POVMs on one qubit. Each implementation consists of a discrete Fourier transform and some elementary quantum operations followed by an orthogonal measurement in the computational basis.
The physical limitations of quantum hardware often require nearest-neighbor qubit structures, in which two-qubit gates are required to construct nearest-neighbor quantum circuits. However, two-qubit gates are considered a major cost of quantum circuits because of their high error rate as compared with single-qubit gates. The controlled-not (CNOT) gate is the typical choice of a two-qubit gate for universal quantum circuit implementation together with the set of single-qubit gates. In this study, we construct a one-dimensional nearest-neighbor circuit of quantum Fourier transform (QFT), which i…
We show that low-depth random quantum circuits can be efficiently simulated by a quantum teleportation-inspired algorithm. By using logical qubits to redirect and teleport the quantum information in quantum circuits, the original circuits can be renormalized to new circuits with a smaller number of logical qubits. We demonstrate the algorithm to simulate several random quantum circuits, including 1D-chain 1000-qubit 42-depth, 2D-grid 125*8-qubit 42-depth and 2D-Bristlecone 72-qubit 32-depth circuits. Our results present a memory-efficient method with a clear physical picture to simulate low-de…
We propose a protocol to construct the 35 $f$-controlled phase gates of a three-qubit refined Deutsch-Jozsa (DJ) algorithm, by using single-qubit $σ_z$ gates, two-qubit controlled phase gates, and two-target-qubit controlled phase gates. Using this protocol, we discuss how to implement the three-qubit refined DJ algorithm with superconducting transmon qutrits resonantly coupled to a single cavity. Our numerical calculation shows that implementation of this quantum algorithm is feasible within the present circuit QED technique. The experimental realization of this algorithm would be an importan…
We consider a circuit-QED setup that allows the induction and control of non-Markovian dynamics of a qubit. Non-Markovianity is enforced over the qubit by means of its direct coupling to a bosonic mode which is controllably coupled to other qubit-mode system. We show that this configuration can be achieved in a circuit-QED setup consisting of two initially independent superconducting circuits, each formed by one charge qubit and one transmission-line resonator, which are put in interaction by coupling the resonators to a current-biased Josephson junction. We solve this problem exactly and then…
We develop a unitary dependence theory to characterize the behaviors of quantum circuits and states in terms of how quantum gates manipulate qubits and determine their measurement probabilities. A qubit has dependence on a 1-qubit unitary gate if its measurement probabilities depend on the parameters of the gate. A 1-qubit unitary creates such a dependence onto the target qubit, and a CNOT gate copies all the dependences from the control qubit to the target qubit. The complete dependence picture of the output state details the connections qubits may have when being manipulated or measured. Com…
We present a circuit construction for a new fixed-frequency superconducting qubit and show how it can be scaled up to a grid with strictly local interactions. The circuit QED realization we propose implements $σ_z$-type coupling between a superconducting qubit and any number of $LC$ resonators. The resulting \textit{longitudinal coupling} is inherently different from the usual $σ_x$-type \textit{transverse coupling}, which is the one that has been most commonly used for superconducting qubits. In a grid of fixed-frequency qubits and resonators with a particular pattern of always-on interaction…
Quantum measurement is important to quantum computing as it extracts the outcome of the circuit at the end of the computation. Previously, all measurements have to be done at the end of the circuit. Otherwise, it will incur significant errors. But it is not the case now. Recently IBM started supporting dynamic circuits through hardware (instead of software by simulator). With mid-circuit hardware measurement, we can improve circuit efficacy and fidelity from three aspects: (a) reduced qubit usage, (b) reduced swap insertion, and (c) improved fidelity. We demonstrate this using real-world appli…
Traditional quantum circuit optimization is performed directly at the circuit level. Alternatively, a quantum circuit can be translated to a ZX-diagram which can be simplified using the rules of the ZX-calculus, after which a simplified circuit can be extracted. However, the best-known extraction procedures can drastically increase the number of 2-qubit gates. In this work, we take advantage of the fact that local changes in a ZX-diagram can drastically affect the complexity of the extracted circuit. We use a pair of congruences (i.e., non-simplification rewrite rules) based on the graph-theor…
We theoretically propose a circuit QED system implemented with triple-leg stripline resonator (TSR). Unlikely from linear stripline resonator, the fundamental intra-cavity microwave modes of the TSR are two-fold degenerate. When a superconducting qubit is placed near one of the TSR legs, one fundamental mode is directly coupled to the qubit, while the other one remains uncoupled. Our system closely resembles an optical cavity QED system, where an atom in a cavity couples only to the incident photon with a specific polarization by placing a polarization beamsplitter in front of the optical cavi…
We present novel algorithms to estimate outcomes for qubit quantum circuits. Notably, these methods can simulate a Clifford circuit in linear time without ever writing down stabilizer states explicitly. These algorithms outperform previous noisy near-Clifford techniques for most circuits. We identify a large class of input states that can be efficiently simulated despite not being stabilizer states. The algorithms leverage probability distributions constructed from Bloch vectors, paralleling previously known algorithms that use the discrete Wigner function for qutrits.
We derive a deterministic protocol to implement a general single-qubit POVM on near-term circuit-based quantum computers. The protocol has a modular structure, such that an $n$-element POVM is implemented as a sequence of $(n-1)$ circuit modules. Each module performs a $2$-element POVM. Two variations of the protocol are suggested, one optimal in terms of number of ancilla qubits, the other optimal in terms of number of qubit gate operations and quantum circuit depth. We use the protocol to implement $2$- and $3$-element POVMs on two publicly available quantum computing devices. The results we…
We explore applications of nonlinear circuit QED with a charge qubit inductively coupled to a microwave LC resonator in the photonic engineering and ultrastrong-coupling multiphoton quantum optics. Simply sweeping the gate-voltage bias achieves arbitrary Fock-state pulsed maser, where the single qubit plays the role of artificial gain medium. Resonantly pumping the parametric qubit-resonator interface leads to the squeezing of resonator field, which is utilizable to the quantum-limited microwave amplification. Moreover, upwards and downwards multiphoton quantum jumps may be observed in the ste…
While mapping a quantum circuit to the physical layer one has to consider the numerous constraints imposed by the underlying hardware architecture. Connectivity of the physical qubits is one such constraint that restricts two-qubit operations, such as CNOT, to "connected" qubits. SWAP gates can be used to place the logical qubits on admissible physical qubits, but they entail a significant increase in CNOT-count. In this paper we consider the problem of reducing the CNOT-count in Clifford+T circuits on connectivity constrained architectures, like noisy intermediate-scale quantum (NISQ) computi…
We present reversible classical circuits for performing various arithmetic operations aided by dirty ancillae (i.e. extra qubits in an unknown state that must be restored before the circuit ends). We improve the number of clean qubits needed to factor an n-bit number with Shor's algorithm from 1.5n+O(1) to n+2, assisted by n-1 dirty qubits, without increasing the asymptotic size or depth of the circuit.
In a recent paper, we showed that secondary storage can extend the range of quantum circuits that can be practically simulated with classical algorithms. Here we refine those techniques and apply them to the simulation of Sycamore circuits with 53 and 54 qubits, with the entanglement pattern ABCDCDAB that has proven difficult to classically simulate with other approaches. Our analysis shows that on the Summit supercomputer at Oak Ridge National Laboratories, such circuits can be simulated with high fidelity to arbitrary depth in a matter of days, outputting all the amplitudes.
We present a scalable set of universal gates and multiply controlled gates in a qudit basis through a bijective mapping from N qubits to qudits with D = 2^N levels via rotations in U(2). For each of the universal gates (H, CNOT, and T), as well as the NOT gate and multiply-controlled-Z gates, we describe a systematic approach to identifying the set of U(2) rotations required to implement each gate for any qudit of size N and with minimal use of an ancilla level. The qudit gates are analyzed in terms of the total rotation count and gate depth as the system scales with D. We apply the qudit-basi…
We derive a family of stochastic master equations describing homodyne measurement of multi-qubit diagonal observables in circuit quantum electrodynamics. In the regime where qubit decay can be neglected, our approach replaces the polaron-like transformation of previous work, which required a lengthy calculation for the physically interesting case of three qubits and two resonator modes. The technique introduced here makes this calculation straightforward and manifestly correct. Using this technique, we are able to show that registers larger than one qubit evolve under a non-Markovian master eq…
We theoretically study operations with a four-level superconducting circuit as a two-qubit system. Using a mapping on a two-qubit system, we show how to implement iSWAP gates and Hadamard gates through pulses on transitions between particular pairs of energy levels. Our approach allows one to prepare pure two-qubit entangled states with desired form of reduced density matrices of the same purity and, in particular, arbitrary identical reduced states of qubits. We propose using schemes for the Hadamard gate and two-qubit entangled states with identical reduced density matrices in order to verif…
