We consider an air-silica honeycomb lattice and demonstrate a new approach to the formation of a core defect. Typically, a high or low-index core is formed by adding a high-index region or an additional air-hole (or other low-index material) to the lattice, but here we discuss how a core defect can be formed by manipulating the cladding region rather than the core region itself. Germanium-doping of the honeycomb lattice has recently been suggested for the formation of a photonic band-gap guiding silica-core and here we experimentally demonstrate how an index-guiding silica-core can be formed by fluorine-doping of the honeycomb lattice.
Understanding cladding properties is crucial for designing microstructured optical fibers. This is particularly acute for Inhibited-Coupling guiding fibers because of the reliance of their core guidance on the core and cladding mode-field overlap integral. Consequently, careful planning of the fiber cladding parameters allows obtaining fibers with optimized characteristics such as low loss and broad transmission bandwidth. In this manuscript, we report on how one can tailor the modal properties of hollow-core photonic crystal fibers by adequately modifying the fiber cladding. We show that the …
A Core/Cladding Yb-doped fiber amplifier configuration is presented that relies on anti-Stokes fluorescence cooling for effective heat mitigation in high-power operation. In the proposed design, the inner cladding of the double clad fiber is doped with the same ion as in the core; therefore, the excess heat generated from the background absorption is removed by the anti-Stokes fluorescence in both core and inner cladding. We consider both silica and ZBLAN glasses for the host material in the Core/Cladding Yb-doped fiber amplifier. The model incorporates the spatial profiles of the signal and p…
In this paper we present a theoretical and numerical analysis of light localization in hollow core microstructured fibers (HCMFs) with a complicated shape of the core cladding boundary. The analysis is based on well established models (for example, the ARROW model) and also on the models proposed for the first time. In particular, we consider local and nonlocal mechanisms of light localization in the waveguide structures with a determined type of discrete rotational symmetry of the core cladding boundary. We interpret and analyze mechanisms of light localization in negative curvature hollow co…
The analysis of substances outside the cladding has challenged the optical fiber sensors community for decades. A common solution relies on the propagation of light in cladding modes. However, the coupling of light to/from these modes is typically based on permanent gratings in specific locations, which restrict the sensors to point measurements only. In this work, we present dynamic, random-access coupling of light between core and cladding modes of standard fibers, in arbitrarily located short sections. Coupling is based on the stimulation of Brillouin dynamic gratings by two coded pump wave…
In this paper we consider an interaction between the air core modes of hollow core waveguide microstructures and core cladding boundary walls in various shapes. The analysis is based on well established models such as the anti-resonant reflecting optical waveguide model and on the models proposed for the first time. In particular, we consider the dynamics of light localization in the polygonalcore cladding boundary wall as dependant on the type of its discrete rotational symmetry. Based on our findings we analyze the mechanisms of light localization in the core cladding boundary walls of negat…
Here a detailed formalism to achieve an analytical solution of a lossy high power Yb-doped silica fiber laser is introduced. The solutions for the lossless fiber laser is initially attained in detail. Next, the solution for the lossy fiber laser is obtained based on the lossless fiber laser solution. To examine the solutions for both lossless and lossy fiber laser two sets of values are compared with the exact numerical solutions and the results are in a good agreement. Furthermore, steps and procedures for achieving the final solutions are explained clearly and precisely.
We report on the writing of chirped volume Bragg gratings using 400 nm femtosecond pulses and the phase-mask inscription technique in the pure silica inner cladding of the gain fiber. The usefulness of such fiber component is demonstrated as a pump reflector in a cladding-pumped all-fiber laser. A reflectivity of 53% for the residual pump power guided in the cladding of the highly multimode 125 microns fiber is achieved, allowing for significant pump recycling in the fiber laser cavity which therefore optimizes the overall laser performances. As proof of concept, adding this pump reflector at …
The temperature distribution inside a double-cladding optical fiber laser or amplifier is examined in detail. Traditionally, the quantum defect in the core is taken to be the main source of heating in an active optical fiber. However, contributions from the parasitic absorption of the signal and the pump may also play an important role, especially for low quantum defect or radiation-balanced lasers and amplifiers. The contributions to the heating in both the core and the inner-cladding are considered and analyzed in general terms in this paper. In particular, it is shown that if the maximum to…
Two-Step Tapering-Collapse Method Enables Element-Interdiffused Cladding for Enhanced Laser Amplification in Yb:YAG Single Crystal Fibers
College of Advanced Interdisciplinary Studies, National University of Defense Technology（国防科技大学高等交叉学院）；Nanhu Laser Laboratory, National University of Defense Technology（国防科技大学南湖实验室）；State Key Lab of Crystal Materials, Shandong University（山东大学晶体材料国家重点实验室）
Space-division multiplexing (SDM), whereby multiple spatial channels in multimode and multicore optical fibers are used to increase the total transmission capacity per fiber, is being investigated to avert a data capacity crunch and reduce the cost per transmitted bit. With the number of channels employed in SDM transmission experiments continuing to rise, there is a requirement for integrated SDM components that are scalable. Here, we demonstrate a cladding-pumped SDM erbium-doped fiber amplifier (EDFA) that consists of six uncoupled multimode erbium-doped cores. Each core supports three spat…
The advent of photonic bandgap (PBG) guiding hollow- core photonic crystal fiber (HC-PCF) sparked the hope of guiding light with attenuation below the fundamental silica Rayleigh scattering limit (SRSL) of conventional step-index fibers. Unfortunately, the combination of the strong core-cladding optical-overlap, the surface roughness at the silica cladding struts and the presence of interface-modes limited the lowest reported transmission-loss to 1.2 dB/km at 1550 nm. This hope is recently revived by the introduction of hypocycloid core- contour (i.e. negative curvature) in inhibited-coupling …
Understanding the impact of the cladding tube structure on the overall guiding performance is crucial for designing single-mode, wide-band, and ultra low-loss nested hollow-core anti-resonant fiber (HC-ARF). Here we thoroughly investigate on how the propagation loss is affected by the nested elements when their geometry is realistic (i.e., non-ideal). Interestingly, it was found that the size rather than the shape of the nested elements, have a dominant role in the final loss performance of the HC-ARFs. We identify a unique 'V-shape' pattern for suppression of higher-order modes loss by optimi…
By means of the transfer matrix method, the optical properties of fibers with a distinct intermediate layer between a hol-low core and periodic cladding are calculated. The periodic cladding consists of two types of the alternating layers. The intermediate layer has distinct thickness and refractive index. Depending on these parameters, the fiber can work in the single-mode or multi-mode regimes. In the multi-mode regime, the optical loss of the smallest loss mode can be de-creased by increasing the thickness of the layer. In the single-mode regime, the optical loss falls with a rise in the re…
Optical fiber with high numerical aperture (NA) can efficiently relieve the degeneracy of higher order linearly polarized modes. The degeneracy relief is investigated in two types of high NA fibers, i.e., low index cladding fiber and high-index-core fiber. A naked core fiber, as with low index cladding, can be used theoretically to generate the orbital angular momentum mode (OAMM) HE21 and the cylindrically symmetric modes (CSMs) TM01 and TE01. A high index core fiber incorporated with high contrast index structure can be used similarly to obtain OAMM HE31. The generation of both CSMs and OAMM…
In this letter, to the best of our knowledge, a new type of hollow-core anti-resonant fiber (HC-ARF) design using hybrid silica/chalcogenide cladding is presented for single-polarization, high-birefringence, and endlessly single-mode operation at 2 $μ$m wavelength. We show that the inclusion of a chalcogenide layer in the cladding allows strong suppression of $x$-polarization, while maintaining low propagation loss and single-mode propagation for $y$-polarization. The optimized HC-ARF design includes a combination of low propagation loss, high-birefringence, and polarization-extinction ratio (…
Spectral anti-crossings between the fundamental guided mode and core wall resonances alter the dispersion in hollow-core anti-resonant-reflection photonic crystal fibers. Here we study the effect of this dispersion change on the nonlinear propagation and dynamics of ultrashort pulses. We find that it causes emission of narrow spectral peaks through a combination of four-wave mixing and dispersive wave emission. We further investigate the influence of the anti-crossings on nonlinear pulse propagation and show that their impact can be minimized by adjusting the core-wall thickness in such a way …
Optical fibers containing multiple cores are being developed towards capacity enhancement in space-division multiplexed optical communication networks. In many cases, the fibers are designed for negligible direct coupling of optical power among the cores. The cores remain, however, embedded in a single, mechanically-unified cladding. Elastic (or acoustic) modes supported by the fiber cladding geometry are in overlap with multiple cores. Acoustic waves may be stimulated by light in any core through electrostriction. Once excited, the acoustic waves may induce photo-elastic perturbations to opti…
The remarkable recent demonstrations in ultralow loss Inhibited-Coupling (IC) hollow-core photonic crystal fibers (HCPCFs) place them as serious candidates for the next-generation of long-haul fiber optics systems. A hindrance to this prospect, but also to short-haul applications such as micromachining, where stable and high-quality beam delivery is needed, is the challenge to design and fabricate an IC-guiding fiber that combines ultra-low loss, truly and robust single-modeness, and polarization-maintaining operation. Design solutions proposed up to now require a trade-off between low loss an…
We present detailed experimental study on noise-seeded intermodal modulation instability (IM-MI) in normal dispersion region of a conventional step-index fiber. The sharp refractive index contrast between core and cladding leads to large group velocity mismatch between the spatial modes, coaxing to efficient IM-MI and generation of multiple spectral peaks along with Raman peaks. Evolution of the spectrum with pump powers and fiber lengths are observed. Experimental findings are well supported with the theoretical framework based on bimodal-MI model considering the distinct dispersion parameter…
We show how to apply tiling and pattern theory in the design of hollow-core photonic crystal fibers and guide light in multiple bandgaps. By combining two different glass apexes in a single [$3^6$;$3^2$.$4.3.4$] 2-uniform tiling, transmission regions with fundamental, second and third harmonic wavelengths are supported. This cladding design may also be an excellent candidate for high power beam delivery of Er/Yb, Nd:YAG and Ti:Sapphire laser sources.
Surface modes (SM) are highly spatially localized modes existing at the core-cladding interface of photonic-bandgap hollow-core fiber (PBG-HCF). When coupling with SM, the air modes (AM) in the core would suffer a higher loss despite being spectrally within the cladding photonic bandgap, and would be highly dispersive around the avoided crossing (anti-crossing) wavelength. In this paper, we numerically demonstrate that such avoided crossings can play an important role in the tuning of the temperature dependence of group delay of AM of PBG-HCF. At higher temperatures, both the thermal-optic eff…
We investigate various methods for extending the simple analytical capillary model to describe the dispersion and loss of anti-resonant hollow-core fibers without the need of detailed finite-element simulations across the desired wavelength range. This poor-man's model can with a single fitting parameter quite accurately mimic dispersion and loss resonances and anti-resonances from full finite-element simulations. Due to the analytical basis of the model it is easy to explore variations in core size and cladding wall thickness, and should therefore provide a valuable tool for numerical simulat…
We propose a scheme to enhance the effective photonic bandwidth exploiting bandgap overlapping of same order or different orders through judiciously chosen aperiodic geometries is spatial dimension. To implement the scheme, we design a specialty optical fiber with hybrid chirped-cladding. Our designed fiber provides an ultra-wide photonic bandwidth of ~ 3 micron. The less dispersive behavior of the structure carries the signature of zero dispersion at ~2.7micron. The proposed two material all-solid fiber geometry is based on thermally compatible chalcogenide glasses, GeAsSe and AsSe as low and…
We study photonic crystal fibers and ring resonators with topological features induced by Aubry- Andre-Harper modulations of the cladding. We find non trivial gaps and edge states at the interface between regions with different Chern numbers. We calculate the field profile and eigenvalue dispersion by an exact recursive approach. Compared with conventional circular resonators and fibers, the proposed structure features topological protection and hence robustness against symmetry-preserving local perturbations that do not close the gap. These topological photonic crystal fibers sustain strong f…
The optical properties of solid core microstructured optical fibers (SC MOFs) have been studied for a long time. The process of energy outflow of the core modes has always been associated with the process of constructive interference of the core modes fields under reflection from the photonic crystal cladding. In this paper, we want to offer a new look at the light localization in the core of SC MOFs related to the behavior of spin and orbital parts of the Poynting vector of these core modes and singularities arising in it.
The development of highly-sensitive and miniaturized sensors that capable of real-time analytes detection is highly desirable. Nowadays, toxic or colorless gas detection, air pollution monitoring, harmful chemical, pressure, strain, humidity, and temperature sensors based on photonic crystal fiber (PCF) are increasing rapidly due to its compact structure, fast response and efficient light controlling capabilities. The propagating light through the PCF can be controlled by varying the structural parameters and core-cladding materials, as a result, evanescent field can be enhanced significantly …
We study coherent anti-Stokes Raman spectroscopy in air-filled anti-resonance hollow-core photonic crystal fiber, otherwise known as 'revolver' fiber. We compare the vibrational coherent anti-Stokes Raman signal of N$_2$, at 2331 cm$^{-1}$, generated in ambient air (no fiber present), with the one generated in a 2.96 cm of a revolver fiber. We show a 170 times enhancement for the signal produced in the fiber, due to an increased interaction path. Remarkably, the N$_2$ signal obtained in the revolver fiber shows near-zero non-resonant background, due to near-zero overlap between the laser field…
Cylindrical vector beams (CVBs) have a wide range of applications owing to their particular polarization characteristics and optical field distributions. For the first time, an azimuthally polarized fiber laser without any polarization controller is proposed and demonstrated experimentally. The scheme is based on a self-designed ring-core fiber and transverse mode filter (TMF). The ring-core fiber can break the degeneracy of LP11 modes and make the TE01 mode propagate stably in the fiber laser. The TMF, which made from the ring-core fiber by depositing a layer of Aluminum on the cladding surfa…
Optical properties of hollow-core revolver fibers are numerically investigated depending on various parameters: the hollow-core diameter, the capillary wall thickness, the values of the minimum gap between the capillaries, the number of capillaries in the cladding and the type of glass (silica and chalcogenide). Preliminary, similar calculations are made for simple models of hollow-core fibers. Based on the obtained results, the optimal design of the revolver fiber for Raman laser frequency conversion (1560 nm to 4420 nm in H2) was determined. As a result, efficient ns-pulsed 4420 nm Raman las…
The photonic crystal fibers (PCF) or air-silica microstructured fibers consist of a periodic array of dielectric transverse. By introducing a defect in this structure, it is possible to guide the light by a photonic bandgap effect, whose properties are different fundamentally from the guide by total internal reflection that takes place in conventional fibers. PCF with two cores have significant potential, and this is one of the main motivations witches led us to approach this theme in this article. Analysis of the inter-core coupling was also necessary to study the problem of crosstalk. Their …
Generation of High-order Laguerre-Gaussian modes in Coated and Uncoated Graded-Index and Step-Index Multimode Fibers
Dipartimento di Ingegneria dell’Informazione, Università di Brescia（布雷西亚大学信息工程系）；Dipartimento di Ingegneria dell’Informazione, Elettronica e Telecomunicazioni, Sapienza Università di Roma（罗马智慧大学信息与电子通信工程系）；Dipartimento di Ingegneria, Università degli Studi Niccolò Cusano（尼古拉·库萨诺大学工程系）
We report a silica glass nested capillary anti-resonant nodeless fiber with transmission and low bending sensitivity in the mid-infrared around 4000 nm. The fiber is characterized in terms of transmission over 1700-4200 nm wavelengths, revealing a mid-infrared 3500-4200 nm transmission window, clearly observable for a 12 m long fiber. Bending loss around 4000 nm is 0.5 dB/m measured over 3 full turns with 40 mm radius, going up to 5 dB/m for full turns with 15 mm radius. Our results provide experimental evidence of hollow-core silica fibers in which nested, anti-resonant capillaries provide hi…
All-optical switching of 77 fs pulses centered at 1560 nm, driven by 270 fs, 1030 nm pulses in a dual-core optical fiber exhibiting high index contrast is presented. The fiber is made of a thermally matched pair of lead silicate and borosilicate glasses used as core and cladding material, respectively. The novel switching approach is based on nonlinear balancing of dual-core asymmetry, by control pulse intensity induced group velocity reduction of the fast fiber channel. Due to the fiber core made of soft glass with high nonlinearity high switching contrast exceeding 20 dB is attained under ap…
