We apply lattice Boltzmann methods to study the relaxation of the velocity profile in binary fluids under shear during spinodal decomposition. In simple fluids, when a shear flow is applied on the boundaries of the system, the time required to obtain a triangular profile is inversely proportional to the viscosity and proportional to the square of the size of the system. We find that the same behaviour also occurs for binary mixtures, for any component ratio in the mixture and independently from the time when shear flow is switched on during phase separation.
A new lattice Boltzmann model for multicomponent ideal gas mixtures is presented. The model development consists of two parts. First, a new kinetic model for Stefan- Maxwell diffusion amongst the species is proposed and realized as a lattice Boltzmann equation on the standard discrete velocity set. Second, a compressible lattice Boltzmann model for the momentum and energy of the mixture is established. Both parts are consistently coupled through mixture composition, momentum, pressure, energy and enthalpy whereby a passive scalar advection-diffusion coupling is obviated, unlike in previous app…
Current multi-component, multiphase pseudo-potential lattice Boltzmann models have thermodynamic inconsistencies that prevent them to correctly predict the thermodynamic phase behavior of partially miscible multi-component mixtures, such as hydrocarbon mixtures. This paper identifies these inconsistencies and attempts to design a thermodynamically consistent multi-component, multiphase pseudo-potential lattice Boltzmann model that allows mass transfer across the phase interfaces and is capable to predict the phase behavior of typically partially miscible hydrocarbon mixtures. The designed mode…
The wall shear stress is a quantity of profound importance for clinical diagnosis of artery diseases. The lattice Boltzmann is an easily parallelizable numerical method of solving the flow problems, but it suffers from errors of the velocity field near the boundaries which leads to errors in the wall shear stress and normal vectors computed from the velocity. In this work we present a simple formula to calculate the wall shear stress in the lattice Boltzmann model and propose to compute wall normals, which are necessary to compute the wall shear stress, by taking the weighted mean over boundar…
Well designed lattice-Boltzmann codes exploit the essentially embarrassingly parallel features of the algorithm and so can be run with considerable efficiency on modern supercomputers. Such scalable codes permit us to simulate the behaviour of increasingly large quantities of complex condensed matter systems. In the present paper, we present some preliminary results on the large scale three-dimensional lattice-Boltzmann simulation of binary immiscible fluid flows through a porous medium derived from digitised x-ray microtomographic data of Bentheimer sandstone, and from the study of the same f…
A multiple-relaxation-time discrete Boltzmann model (DBM) is proposed for multicomponent mixtures, where compressible, hydrodynamic, and thermodynamic nonequilibrium effects are taken into account. It allows the specific heat ratio and the Prandtl number to be adjustable, and is suitable for both low and high speed fluid flows. From the physical side, besides being consistent with the multicomponent Navier-Stokes equations, Fick's law and Stefan-Maxwell diffusion equation in the hydrodynamic limit, the DBM provides more kinetic information about the nonequilibrium effects. The physical capabil…
We study the structure of a shock wave for a two-, three- and four-component gas mixture on the basis of numerical solution of the Boltzmann equation for the model of hard sphere molecules. For the evaluation of collision integrals we use the Conservative Projection Method developed by F.G. Tscheremissine which we extended to gas mixtures in cylindrical coordinates. The transition from the upstream to downstream uniform state is presented by macroscopic values and distribution functions. The obtained results were compared with numerical and experimental results of other authors.
Numerical solution of non-steady problems of supersonic inflow of a binary mixture of a rarefied gas on a normally posed wall with mirror and diffuse reflection laws is obtained on the basis of the kinetic Boltzmann equation for the model of hard sphere molecules. For calculation of collision integrals we apply the projection method, developed by Tcheremissine for a one-component gas and generalized by the author for a binary gas mixture in the case of cylindrical symmetry. We demonstrate a good qualitative agreement of our results with other authors for one-component gases.
Gas separation of a binary gaseous mixture is one of characteristic phenomena in the micro-scale flows that differ from the conventional size flows. In this work, the separation in a binary gas mixture flows through a microchannel is investigated by the lattice Boltzmann method with a diffuse-bounce-back (DBB) boundary condition. The separation degree and rate are measured in the He--Ar and Ne--Ar systems for different mole fractions, pressure ratios, and Knudsen numbers. The results show that the separation phenomenon in the He--Ar mixture is more obvious than that in the Ne--Ar mixture at th…
A new lattice Boltzmann model for reactive ideal gas mixtures is presented. The model is an extension to reactive flows of the recently proposed multi-component lattice Boltzmann model for compressible ideal gas mixtures with Stefan-Maxwell diffusion for species interaction. First, the kinetic model for the Stefan--Maxwell diffusion is enhanced to accommodate a source term accounting the change of the mixture composition due to chemical reaction. Second, by including the heat of formation in the energy equation, the thermodynamic consistency of the underlying compressible lattice Boltzmann mod…
Present work attempts to identify the roles of flow- and geometric-variables on the scaling factor which is a necessary parameter for modeling the apparent viscosity of non-Newtonian fluid in porous media. While idealizing the porous media microstructure as arrays of circular and square cylinders, present study uses multi-relaxation time lattice Boltzmann method to conduct pore-scale simulation of shear thinning non-Newtonian fluid flow. Variation in the size and inclusion ratio of the solid cylinders generates wide range of porous media with varying porosity and permeability. Present study al…
We report a hybrid numerical method for the solution of the model H fluctuating hydrodynamic equations for binary mixtures. The momentum conservation equations with Landau-Lifshitz stresses are solved using the fluctuating lattice Boltzmann equation while the order parameter conservation equation with Langevin fluxes are solved using the stochastic method of lines. Two methods, based on finite difference and finite volume, are proposed for spatial discretisation of the order parameter equation. Special care is taken to ensure that the fluctuation-dissipation theorem is maintained at the lattic…
Non-Newtonian fluid flows, especially in three dimensions (3D), arise in numerous settings of interest to physics. Prior studies using the lattice Boltzmann method (LBM) of such flows have so far been limited to mainly to two dimensions and used less robust collision models. In this paper, we develop a new 3D cascaded LBM based on central moments and multiple relaxation times on a three-dimensional, nineteen velocity (D3Q19) lattice for simulation of generalized Newtonian (power law) fluid flows. The relaxation times of the second order moments are varied locally based on the local shear rate …
We propose numerical simulations of viscoelastic fluids based on a hybrid algorithm combining Lattice-Boltzmann models (LBM) and Finite Differences (FD) schemes, the former used to model the macroscopic hydrodynamic equations, and the latter used to model the polymer dynamics. The kinetics of the polymers is introduced using constitutive equations for viscoelastic fluids with finitely extensible non-linear elastic dumbbells with Peterlin's closure (FENE-P). The numerical model is first benchmarked by characterizing the rheological behaviour of dilute homogeneous solutions in various configurat…
We use free energy lattice Boltzmann methods (FRE LBM) to simulate shear and extensional flow of a binary mixture in two and three dimensions. To this end, two classical configurations are digitally twinned, namely a parallel-band device for binary shear flow and a four-roller apparatus for binary extensional flow. The FRE LBM and the test cases are implemented in the open-source C++ framework OpenLB and evaluated for several non-dimensional numbers. Characteristic deformations are captured, where breakup mechanisms occur for critical capillary regimes. Though the known mass leakage for small …
A new lattice Boltzmann model (LBM) for chemically reactive mixtures is presented. The approach capitalizes on the recently introduced thermodynamically consistent LBM for multicomponent mixtures of ideal gases. Similar to the non-reactive case, the present LBM features Stefan--Maxwell diffusion of chemical species and a fully on-lattice mean-field realization of the momentum and energy of the flow. Besides introducing the reaction mechanism into the kinetic equations for the species, the proposed LBM also features a new realization of the compressible flow by using a concept of extended equil…
In this study, a phase-field lattice Boltzmann model based on the Allen-Cahn equation with a filtered collision operator and high-order corrections in the equilibrium distribution functions is presented. Here we show that in addition to producing numerical results consistent with prior numerical methods, analytic solutions, and experiments with the density ratio of 1000, previous numerical deficiencies are resolved. Specifically, the new model is characterized by robustness at low viscosity, accurate prediction of shear stress at interfaces, and removal of artificial dense bubbles and rarefied…
In this paper, we consider the capabilities of the Boltzmann equation with the Shakhov and ellipsoidal models for the collision term to capture the characteristics of rarefied gas flows. The benchmark is performed by comparing the results obtained using these kinetic model equations with direct simulation Monte Carlo (DSMC) results for particles interacting via ab initio potentials. The analysis is restricted to channel flows between parallel plates and we consider three flow problems, namely: the heat transfer between stationary plates, the Couette flow and the heat transfer under shear. The …
Using Mathematica package, we derive analytical closed-form expressions for the shear and the bulk viscosity coefficients in multicomponent relativistic gases with constant cross sections, being the relativistic generalization for the hard spheres model. Some of them are cumbersome and require symbolic manipulations in an algebraic package. The constant cross sections are of the elastic processes, while the inelastic (or number-changing) processes (collisions or decays) are considered only partly. As examples, we find explicit expressions of the correct single-component first-order shear visco…
The late-stage demixing following spinodal decomposition of a three-dimensional symmetric binary fluid mixture is studied numerically, using a thermodynamicaly consistent lattice Boltzmann method. We combine results from simulations with different numerical parameters to obtain an unprecendented range of length and time scales when expressed in reduced physical units. Using eight large (256^3) runs, the resulting composite graph of reduced domain size l against reduced time t covers 1 < l < 10^5, 10 < t < 10^8. Our data is consistent with the dynamical scaling hypothesis, that l(t) is a univer…
In dilute gas kinetic theory, model collision dynamics such as Bhatnagar-Gross-Krook (BGK) model is often used to get a better insight and numerical modelling. BGK model and its variants assume that highly nonlinear collision term can be replaced by a simple relaxation dynamics towards Maxwell-Boltzmann distribution. Lebowitz et al., proposed an alternative framework for the collision model, known as Fokker-Planck model, where the relaxation of an arbitrary distribution towards Maxwell-Boltzmann distribution is modelled as a drift-diffusion process in velocity space. In the present manuscript,…
In the lattice Boltzmann method (LBM), the widely utilized wall boundary is the bounce-back (BB) boundary, which corresponds to the no-slip boundary. The BB boundary prevents the LBM from capturing the accurate shear drag on the wall when addressing high Reynolds number flows using coarse-grid systems. In this study, we proposed a "wall-function bounce (WFB)" boundary that incorporates a wall function into the LBM's boundary condition and overcomes the limitation of the BB. The WFB boundary calculates the appropriate shear drag on the wall using a wall function model, and thereafter modifies d…
This study aims to investigate the behavior of multicomponent fluid flows consisting of Newtonian and non-Newtonian components, especially terminal velocity of a rising bubble in a power-law fluid. A recent lattice Boltzmann (LB) model is extended using power-law scheme to be able to simulate both Newtonian and non-Newtonian fluid flows at high density and viscosity ratios. Also, a variable mobility is introduced in this study to minimize the unphysical error around small bubbles in the domain. A three-component fluid flow system is examined using a constant and variable mobility. It is shown …
We numerically analyse the rotation of a neutrally buoyant spheroid in a shear flow at small shear Reynolds number. Using direct numerical stability analysis of the coupled nonlinear particle-flow problem we compute the linear stability of the log-rolling orbit at small shear Reynolds number, ${\rm Re}_a$. As ${\rm Re}_a \to 0$ and as the box size of the system tends to infinity we find good agreement between the numerical results and earlier analytical predictions valid to linear order in ${\rm Re}_a$ for the case of an unbounded shear. The numerical stability analysis indicates that there ar…
Convective motions in a fluid layer are affected by its orientation with respect to the gravitational field. We investigate the long-term stability of a thermally-stressed layer of a binary liquid mixture and show that pattern formation is strongly affected by marginal inclinations as small as a few milliradians. At small Rayleigh numbers the mass transfer is dominated by the induced large scale shear flow, while at larger Rayleigh numbers it is dominated by solutal convection. At the transition, the balance between the solutal and shear flows gives rise to drifting columnar flows moving in op…
