Lithium-ion batteries (LIBs) are the leading technology used in consumer electronics, electric vehicles, and grid-level electrochemical energy storage applications. The ever-increasing use of LIBs has highlighted a gap in understanding of their behavior throughout their life cycle. Current monitoring systems rely on electrical and sometimes temperature measurements to assess the internal state which limits information about complex electrochemical processes. In response, ultrasonic testing (UT) has shown promise for non-invasive assessment due to its ease of use and sensitivity to mechanical changes which are correlated with electrochemical changes within the battery. We summarize the research in UT methods applied to LIBs throughout their life cycle. We also discuss physics-based and data-driven modeling approaches used to interpret ultrasonic signals in the context of LIBs, with an emphasis on the existing challenge of establishing rigorous links between electrochemical behavior and elastic and poroelastic wave physics to gain insight regarding physical changes in the LIB that can be directly measured using UT. Finally, we discuss the challenges of implementing UT across the LIB life cycle and identify opportunities for further research. This review aims to provide helpful guidance to researchers and practitioners of UT in the growing field of UT for electrochemical battery systems.
We perform phase-field simulations of the electrodeposition process that forms dendrites within metal-anode batteries including anisotropic representation. We describe the evolution of a phase field, the lithium-ion concentration, and an electric potential, during a battery charge cycle, solving equations using time-marching algorithms with automatic time-step adjustment and implemented on an open-source finite element library. A modified lithium crystal surface anisotropy representation for phase-field electrodeposition model is proposed and evaluated through different numerical tests, exhibi…
We present a porous electrode model for lithium-ion batteries using Butler--Volmer reaction kinetics. We model lithium concentration in both the solid and fluid phase along with solid and liquid electric potential. Through asymptotic reduction, we show that the electric potentials are spatially homogeneous which decouples the problem into a series of time-dependent problems. These problems can be solved on three distinguished time scales, an early time scale where capacitance effects in the electrode dominate, a mid-range time scale where a spatial concentration gradient forms in the electroly…
All-solid-state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendritic growth at room temperature. While cell parameters such as current density, electrolyte porosity and interfacial properties have been investigated, mechanical properties of lithium metal and the role of applied stack pressure on the shorting behavior is still poorly understood. Here, we…
We demonstrate that photoacoustic microscopy (PAM) can be a potential novel imaging tool to investigate the Li metal dendrite growth, a critical issue leading to short circuit and even explosion of Li metal batteries. Our results suggest several advantages of PAM imaging of Li metal batteries: high resolution (micrometers), 3D imaging capability, deep penetration in a separator, and high contrast from bulk Li metal. Further, PAM has potential for in situ real-time imaging of Li metal batteries.
In mathematical models of lithium-ion batteries, the highly heterogeneous porous electrodes are frequently approximated as comprising spherical particles of uniform size, leading to the commonly-used single-particle model (SPM) when transport in the electrolyte is assumed to be fast. Here electrode heterogeneity is modelled by extending this to a distribution of particle sizes. Unimodal and bimodal particle-size distributions (PSD) are considered. For a unimodal PSD, the effect of the spread of the distribution on the cell dynamics is investigated, and choice of effective particle radius when …
A porous electrode resulting from unregulated Li growth is the major cause of the low Coulombic efficiency and potential safety hazards of rechargeable Li metal batteries. Strategies aiming to achieve large granular Li deposits have been extensively explored; yet, the ideal Li deposits, which consist of large Li particles that are seamlessly packed on the electrode and can be reversibly deposited and stripped, have never been achieved. Here, by controlling the uniaxial stack pressure during battery operation, a dense Li deposition (99.49% electrode density) with an ideal columnar structure has…
The rapid pace of replacing fossil fuel propelled transport by electric vehicles is critically dependent on high-performing, high energy density and efficient batteries. Optimal and safe use of existing battery cells and development of much-needed novel battery chemistries and geometries require a large range of diagnostic and monitoring tools. While structural and chemical information is readily extracted through a host of imaging techniques, non-invasive functional detection of interior battery processes remains limited. Here we introduce sensitive magnetometry performed outside the battery …
Dendrite free electrodeposition of lithium metal is necessary for the adoption of high energy density rechargeable lithium metal batteries. Here, we demonstrate a new mechanism of using a liquid crystalline electrolyte to suppress dendrite growth with a lithium metal anode. A nematic liquid crystalline electrolyte modifies the kinetics of electrodeposition by introducing additional overpotential due to its bulk distortion and anchoring free energy. By extending the phase-field model, we simulate the morphological evolution of the metal anode and explore the role of bulk distortion and anchorin…
Photo-rechargeable (solar) battery can be considered as an energy harvesting cum storage system, where it can charge the conventional metal-ion battery using light instead of electricity, without having other parasitic reactions. Here we demonstrate a two-electrode lithium ion solar battery with multifaceted TiS2-TiO2 hybrid sheets as cathode. Choice of TiS2-TiO2 electrode ensures the formation of a type II semiconductor heterostructure while the lateral heterostructure geometry ensures high mass/charge transfer and light interactions with the electrode. TiS2 has a higher lithium binding energ…
To develop a high-density and long-life lithium-ion battery, a technology is needed that allows non-destructive visualization of the spatial distribution of deteriorated parts after cycle test. In the present study, we measured the distribution of the magnetic field leaking from the lithium-ion battery during its operation. Based on the measurement results, we evaluated the current density distribution inside a battery using the electric current reconstruction process. With respect to the changes in an internal state of the lithium-ion battery associated with cycle deterioration, we successful…
Beyond-intercalation batteries promise a step-change in energy storage compared to intercalation based lithium- and sodium-ion batteries. However, only performance metrics that include all cell components and operation parameters can tell whether a true advance over intercalation batteries has been achieved.
This paper presents the current state of mathematical modelling of the electrochemical behaviour of lithium-ion batteries as they are charged and discharged. It reviews the models developed by Newman and co-workers, both in the cases of dilute and moderately-concentrated electrolytes and indicates the modelling assumptions required for their development. Particular attention is paid to the interface conditions imposed between the electrolyte and the active electrode material; necessary conditions are derived for one of these, the Butler-Volmer relation, in order to ensure physically realistic …
The performance of lithium and sodium ion batteries relies notably on the accessibility to carbon electrodes of controllable porous structure and chemical composition. This work reports a facile synthesis of well-defined porous N-doped carbons (NPCs) using a poly(ionic liquid) (PIL) as precursor, and graphene oxide (GO)-stabilized poly(methyl methacrylate) (PMMA) nanoparticles as sacrificial template. The GO-stabilized PMMA nanoparticles were first prepared and then decorated by a thin PIL coating before carbonization. The resulting NPCs reached a satisfactory specific surface area of up to 56…
Lithium-metal batteries employing concentrated glyme-based electrolytes and different cathode chemistries are herein evaluated in view of a safe use of the highly energetic alkali-metal anode. Indeed, diethylene-glycol dimethyl-ether (DEGDME) and triethylene-glycol dimethyl-ether (TREGDME) dissolving lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium nitrate (LiNO3) in concentration approaching the solvents saturation limit are used in lithium batteries employing either a conversion sulfur-tin composite (S:Sn 80:20 w/w) or a Li+ (de-)insertion LiFePO4 cathode. Cyclic voltammetry (…
A thick electrode with high areal capacity has been developed as a strategy for high-energy-density lithium-ion batteries, but thick electrodes have difficulties in manufacturing and limitations in ion transport. Here, we reported a new manufacturing approach for ultra-thick electrode with aligned structure, called structure electrode additive manufacturing or SEAM, which aligns active materials to the through-thicknesses direction of electrodes using shear flow and a designed printing path. The ultra-thick electrodes with high loading of active materials, low tortuous structure, and good stru…
University of the Witwatersrand（威特沃特斯兰德大学）；Université de Tours（图尔大学）；Inserm Research Unit U1253: iBrain（法国国家健康与医学研究院U1253单元：iBrain）；Faculté de Médecine（医学院）；Moscow State University（莫斯科国立大学）
The recycling of lithium ion batteries has been mentioned as one of the near-future waste management necessities. In order for recycling to be economically viable, straightforward and cost effective techniques need to be developed to separate the individual materials in a composite electrode. Ultrasonic separation might be such a technique, provided that lithium ion battery microparticles respond predictably to a sound field. Lithium ion battery cathodes contain hydrophobic carbon. Owing to the incompressibility of a solid, the thin gaseous layer surrounding these hydrophobic particles must os…
Employing two-dimensional (2D) materials as anodes for lithium-ion batteries (LIBs) is believed to be an effective approach to meet the growing demands of high-capacity next-generation LIBs. In this work, the first-principles density functional theory (DFT) calculations are employed to evaluate the potential application of two-dimensional phosphorus carbide (2D PCx, x=2, 5, and 6) monolayers as anode materials for lithium-ion batteries. The 2D PCx systems are predicted to show outstanding structural stability and electronic properties. From the nudge elastic band calculations, the Li atoms sho…
Lithium metal cells are key towards achieving high specific energy and energy density for electrification of transportation and aviation. Anode-free cells are the limiting case of lithium metal cells involving no excess lithium and the highest possible specific energy. In addition, anode-free cells are easier, cheaper and safer as they avoid handling and manufacturing of lithium metal foils. Issues related to dendrite growth and poor cycling are magnified in anode-free cells due to lack of excess lithium. Electrolyte and current collector surface play a crucial role in affecting the cycling pe…
We have demonstrated a fiber lithium ion battery (LIB) fabricated by co-twisting a LiFePO4 composite-coated copper wire (cathode) together with an aluminum wire (anode). An all-solid LiPF6 composite layer functioning both as the electrolyte and battery separator is deposited onto the two electrode wires before twisting. To characterize the electrochemical properties of the battery, charge-discharge tests with different C-rates are performed. The fiber LIB has an open-circuit voltage of ~3.4 V, and the typical specific capacity is found to be ~87 mAhg-1 at 0.5 C charge-discharge rate. Besides, …
A new class of high-performance pyrrolidinium cation based ionanofluid electrolytes with higher lithium salt concentration are developed. The electrolytes are formed by dispersing imidazolium ionic liquid functionalized TiO2 nanoparticles in low conducting, 0.6 M lithium salt doped N-alkyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide (Pyr14TFSI) ionic liquid (IL) hosted electrolyte. Viscosity, ionic conductivity and thermal properties of these electrolytes are compared with well studied 0.2 M salt doped Pyr14TFSI IL-based electrolyte. The highly crystalline 0.6 M lithium salt dissolv…
Solid electrolytes are widely considered as the enabler of lithium metal anodes for safe, durable, and high energy density rechargeable lithium-ion batteries. Despite the promise, failure mechanisms associated with solid-state batteries are not well-established, largely due to limited understanding of the chemomechanical factors governing them. We focus on the recent developments in understanding solid-state aspects including the effects of mechanical stresses, constitutive relations, fracture, and void formation, and outline the gaps in the literature. We also provide an overview of the manuf…
The pseudo-two-dimensional (P2D) model is a complex mathematical model that can capture the electrochemical processes in Li-ion batteries. However, the model also brings a heavy computational burden. Many simplifications to the model have been introduced in the literature to reduce the complexity. We present a method for fast computation of the P2D model which can be used when simplifications are not accurate enough. By rearranging the calculations, we reduce the complexity of the linear algebra problem. We also employ automatic differentiation, using an open source package JAX for robustness,…
We propose fabrication of the fiber-shaped lithium ion batteries assembled by twisting a cathode filament together with an anode filament. The cathode filament is fabricated by depositing a LiFePO4 (LFP)-composite layer onto a steel-filled polyester conductive thread (SPCT). As anode filaments, we propose several scenarios including a Li4Ti5O12 (LTO)-composite coated SPCT (dip-and-dry deposition), a tin-coated SPCT (PVD deposition) as well as a bare tin wire. An electrolyte composite layer consisting of LiPF6 and polyethylene oxide (PEO) is then deposited onto both the anode and cathode filame…
Beyond Lithium-Ion Batteries: Are Effective Electrodes Possible for Alkaline and Other Alkali Elements? Exploring Ion Intercalation in Surface-Modified Few-Layer Graphene and Examining Layer Quantity and Stages
Diffusion-driven processes are important phenomena of materials science in the field of energy conversion and transmission. During the conversion from chemical energy to electrical energy, the species diffusion is generally linked to the rate of exchange, and hence to the performance of the conversion device. Alternatively, the transmission of the electric field diffuses the species when it passes through any medium. The consequences of this effect can be regulated to attune surface nano-patterns. Otherwise, uncontrolled morphologies may lead to permanent degradation of the metallic conductors…
Solid state battery technology has recently garnered considerable interest from companies including Toyota, BMW, Dyson, and others. The primary driver behind the commercialization of solid state batteries (SSBs) is to enable the use of lithium metal as the anode, as opposed to the currently used carbon anode, which would result in ~20% energy density improvement. However, no reported solid state battery to date meets all of the performance metrics of state of the art liquid electrolyte lithium ion batteries (LIBs) and indeed several solid state electrolyte (SSE) technologies may never reach pa…
Lithium-ion secondary batteries have been used in a wide variety of purposes, such as for powering mobile devices and electric vehicles, but their performance should be improved. One of the factors that limits their performance is the non-uniformity of the chemical reaction in the process of charging and discharging. Many attempts have been made to elucidate the mechanism behind this reaction non-uniformity. In this paper, to detect non-uniformity in various physical properties from Co K-edge two-dimensional X-ray absorption spectroscopy (2D-XAS) images of lithium ion batteries, we propose a m…
