Single pulse All Optical Helicity-Independent Switching is demonstrated in an in-plane magnetized magnetic tunnel junction. A toggle switching of the 2nm thick Co40Fe40B20 soft layer could be achieved by exchange coupling the Co40Fe40B20 with a 10nm thick Co85Gd15 layer monitored by measuring the Tunnel magneto resistance of the device. The use of in plane magnetized electrodes relaxes the constrains linked to perpendicular magnetic anisotropy systems while achieving a tunneling magnetoresistance (TMR) ratio exceeding 100%. The influence of the upper electrical electrode, which is opaque to the laser beam in this study, is also discussed.
We study the evolution of perpendicularly magnetized tunnel junctions under 300 to 400 $^{\circ}$C annealing. The hysteresis loops do not evolve much during annealing and they are not informative of the underlying structural evolutions. These evolutions are better revealed by the frequencies of the ferromagnetic resonance eigenmodes of the tunnel junction. Their modeling provides the exchange couplings and the layers' anisotropies within the stack which can serve as a diagnosis of the tunnel junction state after each annealing step. The anisotropies of the two CoFeB-based parts and the two Co/…
Deterministic current-induced spin-orbit torque (SOT) switching of magnetization in a heavy transition metal/ferromagnetic metal/oxide magnetic heterostructure with the ferromagnetic layer being perpendicularly-magnetized typically requires an externally-applied in-plane field to break the switching symmetry. We show that by inserting an in-plane magnetized ferromagnetic layer CoFeB underneath the conventional W/CoFeB/MgO SOT heterostructure, deterministic SOT switching of the perpendicularly-magnetized top CoFeB layer can be realized without the need of in-plane bias field. Kerr imaging study…
A theoretical formula is derived for the threshold current to switch a perpendicular magnetization in a ferromagnet by the spin Hall effect. The numerical simulation of the Landau-Lifshitz-Gilbert equation indicates that magnetization switching is achieved when the steady-state solution of the magnetization in the presence of the current is outside an energetically unstable region. Based on the numerical result, an analytical theory deriving the threshold current is developed by focusing on the first-order perturbation to the unstable state. The analytical formula clarifies that the magnitude …
We study the offset fields affecting the free layer of perpendicularly magnetized tunnel junctions. In extended films, the free layer offset field results from interlayer exchange coupling with the reference layer through the MgO tunnel oxide. The free layer offset field is thus accompanied with a shift of the free layer and reference layer ferromagnetic resonance frequencies. The shifts depend on the mutual orientation of the two magnetizations. The offset field decreases with the resistance area product of the tunnel oxide. Patterning the tunnel junction into an STT-MRAM disk-shaped cell cha…
Voltage-induced magnetization dynamics in a conically magnetized free layer with an elliptic cylinder shape is theoretically studied on the basis of the macrospin model. It is found that an application of voltage pulse can induce the precessional switching of magnetization even at zero-bias magnetic field, which is of substantial importance for device applications such as voltage-controlled nonvolatile memory. Analytical expressions of the conditions for precessional switching are derived.
We study the combined effects of spin transfer torque, voltage modulation of interlayer exchange coupling and magnetic anisotropy on the switching behavior of perpendicular magnetic tunnel junctions (p-MTJs). In asymmetric p-MTJs, a linear-in-voltage dependence of interlayer exchange coupling enables the effective perpendicular anisotropy barrier to be lowered for both voltage polarities. This mechanism is shown to reduce the critical switching current and effective activation energy. Finally, we analyze the possibility of having switching via interlayer exchange coupling only.
Here, we present an analytical and numerical model describing the magnetization dynamics in MgO-based spin-torque nano-oscillators with an in-plane magnetized polarizer and an out-of-plane free layer. We introduce the spin-transfer torque asymmetry by considering the cosine angular dependence of the resistance between the two magnetic layers in the stack. For the analytical solution, dynamics are determined by assuming a circular precession trajectory around the direction perpendicular to the plane, as set by the effective field, and calculating the energy integral over a single precession per…
We demonstrate current-induced bipolar switching in in-plane magnetized spin-valve devices that incorporate a perpendicularly magnetized spin polarizing layer. Further, hysteretic transitions into a state with intermediate resistance occur at high currents, again for both current polarities. These transitions are shown to be consistent with a macrospin model that considers a spin-polarized current that is tilted with respect to the free layer plane, due to the presence of spin-transfer torque from the polarizing layer. These unique switching characteristics, which have their origin in the nonc…
The flow of in-plane current through ultrathin magnetic heterostructures can cause magnetization switching or domain wall nucleation owing to bulk and interfacial effects. Within the magnetic layer, the current can create magnetic instabilities via spin transfer torques (STT). At interface(s), spin current generated from the spin Hall effect in a neighboring layer can exert torques, referred to as the spin Hall torques, on the magnetic moments. Here, we study current induced magnetization switching in perpendicularly magnetized CoFeB/MgO heterostructures with a heavy metal (HM) underlayer. Dep…
We investigate the Gilbert damping and the magnetization switching of perpendicularly magnetized FeCoB-based free layers embedded in tunnel junctions adequate for spin-torque operated memories. We study the influence of the boron content in MgO / FeCoB /Ta systems alloys on their Gilbert damping after crystallization annealing. Increasing the boron content from 20 to 30\% increases the crystallization temperature, thereby postponing the onset of elemental diffusion within the free layer. This reduction of the interdiffusion of the Ta atoms helps maintaining the Gilbert damping at a low level o…
Spin-orbit torque can drive electrical switching of magnetic layers. Here, we report that at least for micrometer-sized samples there is no simple correlation between the efficiency of dampinglike spin-orbit torque (ξ_DL^j) and the critical switching current density of perpendicularly magnetized spin-current generator/ferromagnet heterostructures. We find that the values of ξ_DL^j based on switching current densities can either under- or over-estimated ξ_DL^j by up to tens of times in a domain-wall depinning analysis, while in the macrospin analysis based on the switching current density ξ_DL^…
A practical problem for memory applications involving perpendicularly magnetized magnetic tunnel junctions is the reliability of switching characteristics at high-bias voltage. Often it has been observed that at high-bias, additional error processes are present that cause a decrease in switching probability upon further increase of bias voltage. We identify the main cause of such error-rise process through examination of switching statistics as a function of bias voltage and applied field, and the junction switching dynamics in real time. These experiments show a coincidental onset of error-ri…
Exchange coupling between two magnetic layers through an interlayer is of broad interest for numerous recent applications of nano-magnetic systems. In this Letter we study ferromagnetic exchange coupling through amorphous paramagnetic Fe-Ta alloys. We show that the exchange coupling depends exponentially on spacer thickness and scales with the Fe-Ta susceptibility, which can be tuned via the alloy composition and/or temperature. Such materials are of high interest for the engineering of perpendicularly magnetized CoFeB-MgO based tunnel junctions as it enables ferromagnetic coupling of magnetic…
Current-induced spin-transfer torques (STT) and spin-orbit torques (SOT) enable the electrical switching of magnetic tunnel junctions (MTJs) in nonvolatile magnetic random access memories. In order to develop faster memory devices, an improvement of the timescales underlying the current driven magnetization dynamics is required. Here we report all-electrical time-resolved measurements of magnetization reversal driven by SOT in a three-terminal MTJ device. Single-shot measurements of the MTJ resistance during current injection reveal that SOT switching involves a stochastic two-step process con…
The nature of spin wave modes excited by spin-polarized direct current in a spin-torque auto-oscillator based on a magnetic nanocontact was studied by a micromagnetic simulation in the case when the external bias magnetic field was rotated from the in-plane to perpendicular-to-plane orientation. In qualitative agreement with the weakly-nonlinear analytical theory it was found, that at a certain critical angle, an abrupt switching from the self-localized nonlinear "bullet" mode to a propagating quasi-linear Slonczewski mode takes place, and is accompanied by an upward jump in generated microwav…
Perpendicular magnetic tunnel junctions are one of the building blocks for spintronic memories, which allow fast nonvolatile data access, offering substantial potentials to revolutionize the mainstream computing architecture. However, conventional switching mechanisms of such devices are fundamentally hindered by spin polarized currents4, either spin transfer torque or spin orbit torque with spin precession time limitation and excessive power dissipation. These physical constraints significantly stimulate the advancement of modern spintronics. Here, we report an optomagnetic tunnel junction us…
We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and the read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density $5\times10^{11}$ A/m$^2$ in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof…
The basic mechanism underlying electric field switching produced by a resonant tunnelling diode (RTD) is analysed and the theory compared with experimental results; agreement to within 12% is achieved. The electro-absorption modulator (EAM) device potential of this effect is explored in an optical waveguide configuration. It is shown that a RTD-EAM can provide significant absorption coefficient change, via the Franz-Keldysh effect, at appropriate optical communication wavelengths around 1550 nm and can achieve up to 28 dB optical modulation in a 200 um active length device. The advantage of th…
We time-resolve the spin-transfer-torque-induced switching in perpendicularly magnetized tunnel junctions of diameters from 50 to 250 nm in the thermally activated regime. When the field and the spin-torque concur to favor the P to AP transition, the reversal yields monotonic resistance ramps that can be interpreted as a domain wall propagation through the device at velocities of 17 to 30 nm/ns; smaller cells switch hence faster. When the field hinders the P to AP transition, the switching is preceded by repetitive switching attempts, during which the resistance transiently increases until suc…
Starting from a low-energy effective Hamiltonian model, we theoretically calculate the dynamical optical conductivity and permittivity tensor of a magnetized graphene layer with Rashba spin orbit coupling (SOC). Our results reveal a transverse Hall conductivity correlated with the usual nonreciprocal longitudinal conductivity. Further analysis illustrates that for intermediate magnetization strengths, the relative magnitudes of the magnetization and SOC can be identified experimentally by two well-separated peaks in the dynamical optical response (both the longitudinal and transverse component…
Control of magnetism without using magnetic fields enables large-scale integration of spintronic devices for memory, computation and communication in the beyond-CMOS era. Mechanisms including spin torque transfer, spin Hall effect, and electric field or strain assisted switching have been implemented to switch magnetization in various spintronic devices. Their operation speed, however, is fundamentally limited by the spin precession time to be longer than 10-100 picoseconds. Overcoming such a speed constraint is critical for the prospective development of spintronics. Here we report the demons…
We report measurements of magnetic switching and steady-state magnetic precession driven by spin-polarized currents in nanoscale magnetic tunnel junctions with low-resistance, < 5 Ohm-micron-squared, barriers. The current densities required for magnetic switching are similar to values for all-metallic spin-valve devices. In the tunnel junctions, spin-transfer-driven switching can occur at voltages that are high enough to quench the tunnel magnetoresistance, demonstrating that the current remains spin-polarized at these voltages.
Current-induced spin-orbit torques provide a versatile tool for switching magnetic devices. In perpendicular magnets, the dampinglike component of the torque is the main driver of magnetization reversal. The degree to which the fieldlike torque assists the switching is a matter of debate. Here we study the switching of magnetic tunnel junctions with a CoFeB free layer and either W or Ta underlayers, which have a ratio of fieldlike to dampinglike torque of 0.3 and 1, respectively. We show that the fieldlike torque can either assist or hinder the switching of CoFeB when the static in-plane magne…
We report on the magnetic switching and backhopping effects due to spin-transfer-torque in magnetic tunnel junctions. Experimental data on the current-induced switching in junctions with MgO tunnel barrier reveal a random back-and-forth switching between the magnetization states, which appears when the current direction favors the parallel magnetic configuration. The effect depends on the barrier thickness $t_b$, and is not observed in tunnel junctions with very thin MgO tunnel barriers, $t_b$ $<$ 0.95 nm. Switching dependence on the bias voltage and barrier thickness is explained in terms of …
We investigated electroforming-free bipolar resistive switching behavior in Pt/Ti/Al2O3/Al tunnel junctions where the Al2O3 tunnel barrier was naturally formed on Al in air. Various compliance current values for the junction's set switching successfully lead to various resistance values in its low resistance state, suggesting the possibility for multi-level-operation. A mechanism for the bipolar switching is qualitatively discussed in terms of the modulation of the tunnel barrier by the reactive Ti layer on top of the barrier.
We use three-terminal magnetic tunnel junctions (MTJs) designed for field-free switching by spin-orbit torques (SOTs) to systematically study the impact of dual voltage pulses on the switching performances. We show that the concurrent action of an SOT pulse and an MTJ bias pulse allows for reducing the critical switching energy below the level typical of spin transfer torque while preserving the ability to switch the MTJ on the sub-ns time scale. By performing dc and real-time electrical measurements, we discriminate and quantify three effects arising from the MTJ bias: the voltage-controlled …
We analyse the phenomenon of back-hopping in spin-torque induced switching of the magnetization in perpendicularly magnetized tunnel junctions. The analysis is based on single-shot time-resolved conductance measurements of the pulse-induced back-hopping. Studying several material variants reveals that the back-hopping is a feature of the nominally fixed system of the tunnel junction. The back-hopping is found to proceed by two sequential switching events that lead to a final state P' of conductance close to --but distinct from-- that of the conventional parallel state. The P' state does not ex…
A new mechanism different from the spin accumulation picture is proposed for the current induced magnetization switching in magnetic tunnel junctions by taking into account the effect of the electron electron interaction. We found in tunnel structures the possibility of an enhanced spin switching effect that, when normalized with respect to the current, is much bigger than that in multilayers. Some recent experimental results show evidence for the present picture.
We investigate fast-pulse switching of in-plane-magnetized magnetic tunnel junctions (MTJs) within 3-terminal devices in which spin-transfer torque is applied to the MTJ by the giant spin Hall effect. We measure reliable switching, with write error rates down to $10^{-5}$, using current pulses as short as just 2 ns in duration. This represents the fastest reliable switching reported to date for any spin-torque-driven magnetic memory geometry, and corresponds to a characteristic time scale that is significantly shorter than predicted possible within a macrospin model for in-plane MTJs subject t…
Interface-engineered voltage-driven magnetic tunnel junctions with ultra-low-energy magnetization switching
University of Arizona（亚利桑那大学）；University of Minnesota（明尼苏达大学）；National Institute of Standards and Technology（美国国家标准与技术研究院）；Korea Research Institute of Chemical Technology（韩国化学技术研究所）
The electric conductivity behavior in the single and double tunnel-coupled quantum wells (QW) with different doping profile caused by impact of short pulses of the strong longitudinal (in the quantum wells plane) electric field has been investigated. It is established that at low temperatures (4 K) after such impact the long-term metastable state with increased electric conductance may be observed in the case of the asymmetric QW couple with the impurity delta shaped layer in the narrower QW. It is not observed in the structures with other configurations. The observed effect is explained by th…
Magnetic tunnel junctions for spin-transfer torque switching were prepared to investigate the dielectric breakdown. The breakdown occurs typically at voltages not much higher than the switching voltages, a bottleneck for the implementation of spin-transfer torque Magnetic Random Access Memory. Intact and broken tunnel junctions are characterized by transport measurements and then prepared for transmission electron microscopy and energy dispersive x-ray spectrometry by focussed ion beam. The comparison to our previous model of the electric breakdown for thicker MgO tunnel barriers reveals signi…
We propose a tunneling heterostructure by replacing one of the metal electrodes in a metal/ferroelectric/metal ferroelectric tunnel junction with a heavily doped semiconductor. In this metal/ferroelectric/semiconductor tunnel diode, both the height and the width of the tunneling barrier can be electrically modulated due to the ferroelectric field effect, leading to a colossal tunneling electroresistance. This idea is implemented in Pt/BaTiO3/Nb:SrTiO3 heterostructures, in which an ON/OFF conductance ratio above 10$^4$ can be readily achieved at room temperature. The colossal tunneling electror…
Thin electrodes of magnetic tunnel junctions can show superparamagnetism at surprisingly low temperature. We analysed their thermally induced switching for varying temperature, magnetic and electric field. Although the dwell times follow an Arrhenius law, they are orders of magnitude too small compared to a model of single domain activation. Including entropic effects removes this inconsistency and leads to a magnetic activation volume much smaller than that of the electrode. Comparing data for varying barrier thickness then allows to separate the impact of Zeman energy, spin-transfer-torque a…
Here we demonstrate that both, tunnel magneto resistance (TMR) and resistive switching (RS), can be observed simultaneously in nano-scale magnetic tunnel junctions. The devices show bipolar RS of 6 % and TMR ratios of about 100 %. For each magnetic state, multiple resistive sates are created depending on the bias history which provides a method for multi-bit data storage and logic. The electronic transport measurements are discussed in the framework of a memristive system. Differently prepared MgO barriers are compared to gain insight into the switching mechanism.
We propose and computationally analyze a nonvolatile static random access memory (NV-SRAM) cell using magnetic tunnel junctions (MTJs) with magnetic-field-free current-induced magnetization switching (CIMS) architecture. A pair of MTJs connected to the storage nodes of a standard SRAM cell with CIMS architecture enables fully electrical store and restore operations for nonvolatile logic information. The proposed NV-SRAM is expected to be a key component of next-generation power-gating logic systems with extremely low static-power dissipation.
Current-driven magnetization switching in low-resistance Co40Fe40B20/MgO/Co40Fe40B20 magnetic tunnel junctions (MTJs) is reported. The critical-current densities Jc required for current-driven switching in samples annealed at 270C and 300C are found to be as low as 7.8 x 10^5 A/cm^2 and 8.8 x 10^5 A/cm^2 with accompanying tunnel magnetoresistance (TMR) ratios of 49% and 73 %, respectively. Further annealing of the samples at 350C increases TMR ratio to 160 %, while accompanying Jc increases to 2.5 x 10^6 A/cm^2. We attribute the low Jc to the high spin-polarization of tunnel current and small …
We explore the scattering of Dirac electrons in a double-gated topological insulator in the presence of magnetic proximity effects and warped surface states. It is found that a magnetic field can shift the Dirac cone in momentum space and deform the constant-energy contour, or opens up a band gap at the Dirac point, depending on the magnetization orientation. The double gate voltage induces quantum wells and/or quantum barriers on the surface of topological insulators, generating surface resonant tunnelling states. It is found that the hexagonal warping effect can increase the electronic trans…
We report the first demonstration of the current-induced magnetization switching in a perpendicularly magnetized A1 CoPt single layer. We show that good perpendicular magnetic anisotropy can be obtained in a wide composition range of the A1 Co1-xPtx single layers, which allows to fabricate perpendicularly magnetized CoPt single layer with composition gradient to break the inversion symmetry of the structure. By fabricating the gradient CoPt single layer, we have evaluated the SOT efficiency and successfully realized the SOT-induced magnetization switching. Our study provides an approach to rea…
We study the effect of the Dzyaloshinskii-Moriya interaction (DMI) on current-induced magnetic switching of a perpendicularly magnetized heavy-metal/ferromagnet/oxide trilayer both experimentally and through micromagnetic simulations. We report the generation of stable helical magnetization stripes for a sufficiently large DMI strength in the switching region, giving rise to intermediate states in the magnetization confirming the essential role of the DMI on switching processes. We compare the simulation and experimental results to a macrospin model, showing the need for a micromagnetic approa…
We report the observation and micromagnetic analysis of current-driven magnetization switching in nanoscale ring-shaped magnetic tunnel junctions. When the electric current density exceeds a critical value of the order of $6\times 10^{6}$A/cm$^2$, the magnetization of the two magnetic rings can be switched back and forth between parallel and antiparallel onion states. Theoretical analysis and micromagnetic simulation show that the dominant mechanism for the observed current-driven switching is the spin torque rather than the current-induced circular Oersted field.
We demonstrate tunnel magnetoresistance (TMR) junctions based on a tri layer system consisting of an epitaxial NiMnSb, aluminum oxide and CoFe tri layer. The junctions show a tunnelling magnetoresistance of Delta R/R of 8.7% at room temperature which increases to 14.7% at 4.2K. The layers show clear separate switching and a small ferromagnetic coupling. A uniaxial in plane anisotropy in the NiMnSb layer leads to different switching characteristics depending on the direction in which the magnetic field is applied, an effect which can be used for sensor applications.
Strong ferromagnetic interlayer exchange couplings $J$ in perpendicularly magnetized systems are becoming increasingly desirable for applications. We study whether ferromagnetic interlayer exchange couplings can be measured by a combination of broadband ferromagnetic resonance methods and magnetometry hysteresis loops. For this we model the switching and the eigenexcitations in bilayer systems comprising a soft layer coupled to a thicker harder layer that possesses higher perpendicular magnetic anisotropy. For large $J >0$ the switching fields are essentially independent of $J$ but the frequen…
We studied polycrystalline B2-type Co2FeAl (CFA) full-Heusler alloy based magnetic tunnel junctions (MTJs) fabricated on a Si/SiO2 amorphous substrate. Polycrystalline CFA films with a (001) orientation, a high B2 ordering, and a flat surface were achieved using a MgO buffer layer. A tunnel magnetoresistance (TMR) ratio up to 175% was obtained for an MTJ with a CFA/MgO/CoFe structure on a 7.5-nm-thick MgO buffer. Spin-transfer torque induced magnetization switching was achieved in the MTJs with a 2-nm-thick polycrystalline CFA film as a switching layer. Using a thermal activation model, the in…
In magnetic nanostructures one usually uses a magnetic field to commute between two resistance (R) states. A less common but technologically more interesting alternative to achieve R-switching is to use an electrical current, preferably of low intensity. Such Current Induced Switching (CIS) was recently observed in thin magnetic tunnel junctions, and attributed to electromigration of atoms into/out of the insulator. Here we study the Current Induced Switching, electrical resistance, and magnetoresistance of thin MnIr/CoFe/AlO$_x$/CoFe tunnel junctions. The CIS effect at room temperature amount…
Spin-orbit interaction derived spin torques provide a means of reversing the magnetization of perpendicularly magnetized ultrathin films with currents that flow in the plane of the layers. A basic and critical question for applications is the speed and efficiency of switching with nanosecond current pulses. Here we investigate and contrast the quasistatic (slowly swept current) and pulsed current-induced switching characteristics of micron scale Hall crosses consisting of very thin ($<1$ nm) perpendicularly magnetized CoFeB layers on $β$-Ta. While complete magnetization reversal is found at a …
We study whether a direct measurement of the absolute temperature of a Magnetic Tunnel Junction (MTJ) can be performed using the high frequency electrical noise that it delivers under a finite voltage bias. Our method includes quasi-static hysteresis loop measurements of the MTJ, together with the field-dependence of its spin wave noise spectra. We rely on an analytical modeling of the spectra by assuming independent fluctuations of the different sub-systems of the tunnel junction that are described as macrospin fluctuators. We illustrate our method on perpendicularly magnetized MgO-based MTJs…
Recent research has indicated that introducing impurities that increase the resistivity of Pt can enhance the efficiency of the spin Hall torque it generates. Here we directly demonstrate the usefulness of this strategy by fabricating prototype 3-terminal in-plane-magnetized magnetic tunnel junctions that utilize the spin Hall torque from a $\rm{Pt}_{85}\rm{Hf}_{15}$ alloy, and measuring the critical currents for switching. We find that $\rm{Pt}_{85}\rm{Hf}_{15}$ reduces the switching current densities compared to pure Pt by approximately a factor of 2 for both quasi-static ramped current bias…
A possible mechanism for the resistive switching observed experimentally in Fe/MgO/V/Fe junctions is presented. Ab initio total energy calculations within the local density approximation and pseudopotential theory shows that by moving the oxygen ions across the MgO/V interface one obtains a metastable state. It is argued that this state can be reached by applying an electric field across the interface. In addition, the ground state and the metastable state show different electric conductances. The latter results are discussed in terms of the changes of the density of states at the Fermi level …
In the quest for reliable and power-efficient memristive devices, ferroelectric tunnel junctions are being investigated as potential candidates. CMOS-compatible ferroelectric hafnium oxides are at the forefront. However, in epitaxial tunnel devices with thicknesses around ${\approx}$ 4 - 6 nm, the relatively high tunnel energy barrier produces a large resistance that challenges their implementation. Here, we show that ferroelectric and electroresistive switching can be observed in ultrathin 2 nm epitaxial Hf$_{0.5}$Zr$_{0.5}$O$_2$ (HZO) tunnel junctions in large area capacitors (${\approx} 300…
We report the intrinsic critical current density (Jc0) in current-induced magnetization switching and the thermal stability factor (E/kBT, where E, kB, and T are the energy potential, the Boltzmann constant, and temperature, respectively) in MgO based magnetic tunnel junctions with a Co40Fe40B20(2nm)/Ru(0.7-2.4nm)/Co40Fe40B20(2nm) synthetic ferrimagnetic (SyF) free layer. We show that Jc0 and E/kBT can be determined by analyzing the average critical current density as a function of coercivity using the Slonczewski's model taking into account thermal fluctuation. We find that high antiferromagn…
Writing magnetic bits by spin-orbit torques (SOTs) arising from spin Hall effect creates new possibilities for ultrafast and low-power magnetoresistive random access memory (MRAM). For perpendicular MRAM, an extra in-plane field is required to break the symmetry for the deterministic SOT writing of the perpendicular storage layer. Although schemes have been demonstrated in external-field-free SOT switching of a perpendicular layer, practically integrating them with perpendicular MTJs still appears to be challenging. Here, we present experimental demonstration of spin-orbit torques (SOTs) switc…
In the persistent photoconductivity (PPC) phenomenon, illumination of a YBCO thin film junction with a 1mW He-Ne laser leads to the decrease of the critical critical voltage (similar to the threshold voltage). The decrease of the critical votage was reversed by illumination with incadenscent light. The critical voltage across the junction was experimentally decreased and increased by alternating illumination between He-Ne laser and incandescent light. We also observed visible quenching of the photo-induced state using a 5mW He-Ne laser. Finally, the threshold behavior of the junction was destr…
A prototype of magnetoresistive random access memory (MRAM) based on magnetic tunnel junctions (MTJ) was fabricated with crossed-anisotropy of magnetic layers on either side of the tunnelling barrier layer. It is demonstrated that the introduction of crossed-anisotropy results in smaller switching fields and better switching times compared to the conventional case of aligned anisotropies. The magnetoresistive properties of fabricated devices are in good agreement with the micromagnetic model.
