In the era of Noisy Intermediate-Scale Quantum computing as well as in error correcting circuits, physical qubits coherence time and high fidelity gates are essential to the functioning of quantum computers. In this paper, we demonstrate theoretically and experimentally, that pulses designed by optimization can be used to counteract the loss of fidelity due to a control amplitude error of the transmon qubit. We analyze the control landscape obtained by robust optimal control and find it to depend on the error range, namely the solutions can get trapped in the basin of attraction of sub-optimal solutions. Robust controls are found for different error values and are compared to an incoherent loss of fidelity mechanism due to a finite relaxation rate. The controls are tested on the IBMQ's qubit and found to demonstrate resilience against significant $\sim 10\%$ errors.
With the long coherence time, the fixed-frequency transmon qubit is a promising qubit modality for quantum computing. Currently, diverse qubit architectures that utilize fixed-frequency transmon qubits have been demonstrated with high-fidelity gate performance. Nevertheless, the relaxation times of transmon qubits can have large temporal fluctuations, causing instabilities in gate performance. The fluctuations are often believed to be caused by nearly on-resonance couplings with sparse two-level-system (TLS) defects. To mitigate their impact on qubit coherence and gate performance, one direct …
this study significantly emphasizes on the entanglement engineering using a transmon qubit. A transmon qubit is created with two superconducting islands coupled with two Josephson Junction embedded into a transmission line. The transmon qubit energies are manipulated through its coupling to the transmission line. The key factor here is the coupling factor between transmission line and qubit by which the quantum features of the system such as transmon decay rate, energy dispersion, and related coherence time are controlled. To complete knowledge about the design, the system is quantum mechanica…
We introduce a new hybrid qubit consisting of a Majorana qubit interacting with a transmon longitudinally coupled to a resonator. To do so, we equip the longitudinal transmon qubit with topological quasiparticles, supported by an array of heterostructure nanowires, and derive charge- and phase-based interactions between the Majorana qubit and the resonator and transmon degrees of freedom. Inspecting the charge coupling, we demonstrate that the Majorana self-charging can be eliminated by a judicious choice of charge offset, thereby maintaining the Majorana degeneracy regardless of the quasipart…
Superconducting qubits are sensitive to a variety of loss mechanisms including dielectric loss from interfaces. By changing the physical footprint of the qubit it is possible to modulate sensitivity to surface loss. Here we show a systematic study of planar superconducting transmons of differing physical footprints to optimize the qubit design for maximum coherence. We find that qubits with small footprints are limited by surface loss and that qubits with large footprints are limited by other loss mechanisms which are currently not understood.
Measurement-induced state transitions in multi-qubit transmon processors
Quantum Algorithms and Applications Collaboratory, Sandia National Laboratories（桑迪亚国家实验室量子算法与应用协作组）；Institut Quantique and Département de Physique, Université de Sherbrooke（舍布鲁克大学量子研究所与物理系）
The design and implementation of quantum technologies necessitates the understanding of thermodynamic processes in the quantum domain. In stark contrast to macroscopic thermodynamics, at the quantum scale processes generically operate far from equilibrium and are governed by fluctuations. Thus, experimental insight and empirical findings are indispensable in developing a comprehensive framework. To this end, we theoretically propose an experimentally realistic quantum engine that uses transmon qubits as working substance. We solve the dynamics analytically and calculate its efficiency.
Using circuit QED, we consider the measurement of a superconducting transmon qubit via a coupled microwave resonator. For ideally dispersive coupling, ringing up the resonator produces coherent states with frequencies matched to transmon energy states. Realistic coupling is not ideally dispersive, however, so transmon-resonator energy levels hybridize into joint eigenstate ladders of the Jaynes-Cummings type. Previous work has shown that ringing up the resonator approximately respects this ladder structure to produce a coherent state in the eigenbasis (a dressed coherent state). We numerically…
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction (AQEC) instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. We realize an AQEC scheme, implemented with only two transmon qubits in a 2D scalable architecture, that actively corrects single-photon loss and passively suppresses low-frequency dephasing using …
Hybrid quantum circuits combining advantages of each individual system have provided a promising platform for quantum information processing. Here we propose an experimental scheme to directly couple a transmon qubit to an individual spin in the nitrogen-vacancy (NV) center, with a coupling strength three orders of magnitude larger than that for a single spin coupled to a microwave cavity. This direct coupling between the transmon and the NV center could be utilized to make a transmon bus, leading to a coherently virtual exchange among different single spins. Furthermore, we demonstrate that, …
Superconducting Josephson junction qubits constitute the main current technology for many applications, including scalable quantum computers and thermal devices. Theoretical modeling of such systems is usually done within the two-level approximation. However, accurate theoretical modeling requires taking into account the influence of the higher excited states without limiting the system to the two-level qubit subspace. Here, we study the dynamics and control of a superconducting transmon using the numerically exact stochastic Liouville-von Neumann equation approach. We focus on the role of sta…
Analytical formulas are presented for simplified but useful qubit geometries that predict surface dielectric loss when its thickness is much less than the metal thickness, the limiting case needed for real devices. These formulas can thus be used to precisely predict loss and optimize the qubit layout. Surprisingly, a significant fraction of surface loss comes from the small wire that connects the Josephson junction to the qubit capacitor. Tapering this wire is shown to significantly lower its loss. Also predicted are the size and density of the two-level state (TLS) spectrum from individual s…
Scaling the number of qubits while maintaining high-fidelity quantum gates remains a key challenge for quantum computing. Presently, superconducting quantum processors with >50-qubits are actively available. For such systems, fixed-frequency transmons are attractive due to their long coherence and noise immunity. However, scaling fixed-frequency architectures proves challenging due to precise relative frequency requirements. Here we employ laser annealing to selectively tune transmon qubits into desired frequency patterns. Statistics over hundreds of annealed qubits demonstrate an empirical tu…
By using the dry etching process of tantalum (Ta) film, we had obtained transmon qubit with the best lifetime (T1) 503 us, suggesting that the dry etching process can be adopted in the following multi-qubit fabrication with Ta film. We also compared the relaxation and coherence times of transmons made with different materials (Ta, Nb and Al) with the same design and fabrication processes of Josephson junction, we found that samples prepared with Ta film had the best performance, followed by those with Al film and Nb film. We inferred that the reason for this difference was due to the different…
The interaction of light and matter is often described by the exchange of single excitations. When the coupling strength is a significant fraction of the system frequencies, the number of excitations are no longer preserved and that simple picture breaks down. This regime is known as the ultrastrong coupling regime and is characterized by non-trivial light-matter eigenstates and complex dynamics. In this work, we propose to use a an array Josephson junctions to increase the impedance of the light mode enabling ultrastrong coupling to a transmon qubit. We show that the resulting dynamics can be…
We report high-fidelity, quantum nondemolition, single-shot readout of a superconducting transmon qubit using a DC-biased superconducting low-inductance undulatory galvanometer(SLUG) amplifier. The SLUG improves the system signal-to-noise ratio by 7 dB in a 20 MHz window compared with a bare HEMT amplifier. An optimal cavity drive pulse is chosen using a genetic search algorithm, leading to a maximum combined readout and preparation fidelity of 91.9% with a measurement time of Tmeas = 200ns. Using post-selection to remove preparation errors caused by heating, we realize a combined preparation …
The spontaneous emission rate (SER) is an important figure of merit for any quantum bit (qubit), as it can play a significant role in the control and decoherence of the qubit. As a result, accurately characterizing the SER for practical devices is an important step in the design of quantum information processing devices. Here, we specifically focus on the experimentally popular platform of a transmon qubit, which is a kind of superconducting circuit qubit. Despite the importance of understanding the SER of these qubits, it is often determined using approximate circuit models or is inferred fro…
Quantum computing relies on the operation of qubits in an environment as free of noise as possible. This work reports on measuring the impact of environmental radiation on lifetimes of fixed frequency transmon qubits with various capacitor pad geometries by varying the amount of shielding used in the measurement space. It was found that the qubit lifetimes are robust against these shielding changes until the most extreme limit was tested without a mixing chamber shield in the refrigerator. In contrast, the quasiparticle tunneling rates were found to be extremely sensitive to all configurations…
We have embedded two fixed-frequency Al/AlO$_{\textrm{x}}$/Al transmons, with ground-to-excited transition frequencies at 6.0714 GHz and 6.7543 GHz, in a single 3D Al cavity with a fundamental mode at 7.7463 GHz. Strong coupling between the cavity and each transmon results in an effective qubit-qubit coupling strength of 26 MHz and a -1 MHz dispersive shift in each qubit's transition frequency, depending on the state of the other qubit. Using the all-microwave SWIPHT (Speeding up Waveforms by Inducing Phases to Harmful Transitions) technique, we demonstrate the operation of a generalized contr…
We present the design of an inductively shunted transmon qubit with flux-tunable coupling to an embedded harmonic mode. This circuit construction offers the possibility to flux-choose between pure transverse and pure longitudinal coupling, that is coupling to the $σ_x$ or $σ_z$ degree of freedom of the qubit. While transverse coupling is the coupling type that is most commonly used for superconducting qubits, the inherently different longitudinal coupling has some remarkable advantages both for readout and for the scalability of a circuit. Being able to choose between both kinds of coupling in…
Experimental Realization of a C-Shunt Flux-Qubit Coupler for Controlled-Z Gates between Transmons
Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences（中国科学院物理研究所凝聚态物理国家实验室）；School of Physics, University of Chinese Academy of Sciences（中国科学院大学物理学院）；Beijing Academy of Quantum Information Sciences（北京量子信息科学研究院）
In this work we analyze the implementation of a control-phase gate through the resonance between the $|11\rangle$ and $|20\rangle$ states of two statically coupled transmons. We find that there are many different controls for the transmon frequency that implement the same gate with fidelities around $99.8\%$ ($T_1=T_2^{*}=17$ $μ$s) and $99.99\%$ ($T_1=T_2^{*}=300$ $μ$s) within a time that approaches the theoretical limit. All controls can be brought to this accuracy by calibrating the waiting time and the destination frequency near the $|11\rangle-|20\rangle$ resonance. However, some controls,…
Quantum computation requires the precise control of the evolution of a quantum system, typically through application of discrete quantum logic gates on a set of qubits. Here, we use the cross-resonance interaction to implement a gate between two superconducting transmon qubits with a direct static dispersive coupling. We demonstrate a practical calibration procedure for the optimization of the gate, combining continuous and repeated-gate Hamiltonian tomography with step-wise reduction of dominant two-qubit coherent errors through mapping to microwave control parameters. We show experimentally …
Recent experimental work on superconducting transmon qubits in 3D cavities show that their coherence times are increased by an order of magnitude compared to their 2D cavity counterparts. However to take advantage of these coherence times while scaling up the number of qubits it is advantageous to address individual qubits which are all coupled to the same 3D cavity fields. The challenge in controlling this system comes from spectral crowding, where leakage transition of qubits are close to computational transitions in other. Here it is shown that fast pulses are possible which address single …
Thermal microwave states are omnipresent noise sources in superconducting quantum circuits covering all relevant frequency regimes. We use them as a probe to identify three second-order decoherence mechanisms of a superconducting transmon. First, we quantify the efficiency of a resonator filter in the dispersive Jaynes-Cummings regime and find evidence for parasitic loss channels. Second, we probe second-order noise in the low-frequency regime and demonstrate the expected $T^{3}$ temperature dependence of the qubit dephasing rate. Finally, we show that qubit parameter fluctuations due to two-l…
High-fidelity iSWAP gate with Double Transmon Coupler
University of Massachusetts, Lowell（马萨诸塞大学洛厄尔分校）；RTX BBN Technologies（RTX BBN科技公司）；University of Colorado, Boulder（科罗拉多大学博尔德分校）；National Institute of Standards and Technology（美国国家标准与技术研究院）；Air Force Research Laboratory（空军研究实验室）；Northwestern University（西北大学）
Quantum battery (QB) is the miniature energy storage and release device and plays a crucial role in future quantum technology. Here, an implementation scheme of a QB is proposed on a superconducting circuit which is composed by $N$ coupled transmon qubits and a one-dimensional transmission line resonator. We derive the Hamiltonian of the QB system and investigate its charging performance by considering three decay channels. We find that the presence of the decay channels suppresses the high oscillation of the energy storage process, thereby realizing a stable and powerful QB. In particular, co…
We report on spectroscopic and time-domain measurements on a fixed-frequency concentric transmon qubit in an applied in-plane magnetic field to explore its limits of magnetic field compatibility. We demonstrate quantum coherence of the qubit up to field values of $B={40}\,\mathrm{mT}$, even without an optimized chip design or material combination of the qubit. The dephasing rate $Γ_φ$ is shown to be not affected by the magnetic field in a broad range of the qubit transition frequency. For the evolution of the qubit transition frequency, we find the unintended second junction created in the sha…
Leakage outside of the qubit computational subspace poses a threatening challenge to quantum error correction (QEC). We propose a scheme using two leakage-reduction units (LRUs) that mitigate these issues for a transmon-based surface code, without requiring an overhead in terms of hardware or QEC-cycle time as in previous proposals. For data qubits we consider a microwave drive to transfer leakage to the readout resonator, where it quickly decays, ensuring that this negligibly affects the coherence within the computational subspace for realistic system parameters. For ancilla qubits we apply a…
