In this work we analyze the implementation of a control-phase gate through the resonance between the $|11\rangle$ and $|20\rangle$ states of two statically coupled transmons. We find that there are many different controls for the transmon frequency that implement the same gate with fidelities around $99.8\%$ ($T_1=T_2^{*}=17$ $μ$s) and $99.99\%$ ($T_1=T_2^{*}=300$ $μ$s) within a time that approaches the theoretical limit. All controls can be brought to this accuracy by calibrating the waiting time and the destination frequency near the $|11\rangle-|20\rangle$ resonance. However, some controls, such as those based on the theory of dynamical invariants, are particularly attractive due to reduced leakage, robustness against decoherence, and their limited bandwidth.
Implementation of high-fidelity two-qubit operations is a key ingredient for scalable quantum error correction. In superconducting qubit architectures tunable buses have been explored as a means to higher fidelity gates. However, these buses introduce new pathways for leakage. Here we present a modified tunable bus architecture appropriate for fixed-frequency qubits in which the adiabaticity restrictions on gate speed are reduced. We characterize this coupler on a range of two-qubit devices achieving a maximum gate fidelity of $99.85\%$. We further show the calibration is stable over one day.
We analyse the implementation of a fast nonadiabatic CZ gate between two transmon qubits with tuneable coupling. The gate control method is based on a theory of dynamical invariants which leads to reduced leakage and robustness against decoherence. The gate is based on a description of the resonance between the $|11\rangle$ and $|20\rangle$ using an effective Hamiltonian with the 6 lowest energy states. A modification of the invariants method allows us to take into account the higher-order perturbative corrections of this effective model. This enables a gate fidelity several orders of magnitud…
Simulations and analytical calculations that aim to describe flux-tunable transmons are usually based on effective models of the corresponding lumped-element model. However, when a control pulse is applied, in most cases it is not known how much the predictions made with the effective models deviate from the predictions made with the original lumped-element model. In this work we compare the numerical solutions of the time-dependent Schrödinger equation for both the effective and the lumped-element models, for microwave and unimodal control pulses (external fluxes). These control pulses are us…
We present the design of an inductively shunted transmon qubit with flux-tunable coupling to an embedded harmonic mode. This circuit construction offers the possibility to flux-choose between pure transverse and pure longitudinal coupling, that is coupling to the $σ_x$ or $σ_z$ degree of freedom of the qubit. While transverse coupling is the coupling type that is most commonly used for superconducting qubits, the inherently different longitudinal coupling has some remarkable advantages both for readout and for the scalability of a circuit. Being able to choose between both kinds of coupling in…
Superconducting qubits are sensitive to a variety of loss mechanisms including dielectric loss from interfaces. By changing the physical footprint of the qubit it is possible to modulate sensitivity to surface loss. Here we show a systematic study of planar superconducting transmons of differing physical footprints to optimize the qubit design for maximum coherence. We find that qubits with small footprints are limited by surface loss and that qubits with large footprints are limited by other loss mechanisms which are currently not understood.
In the gate model of quantum computing, a program is typically decomposed into a sequence of 1- and 2-qubit gates that are realized as control pulses acting on the system. A key requirement for a scalable control system is that the qubits are addressable - that control pulses act only on the targeted qubits. The presence of control crosstalk makes this addressability requirement difficult to meet. In order to provide metrics that can drive requirements for decreasing crosstalk, we present three measurements that directly quantify the DC and AC flux crosstalk present between tunable transmons, …
The efficient implementation of many-body interactions in superconducting circuits allows for the realization of multipartite entanglement and topological codes, as well as the efficient simulation of highly correlated fermionic systems. We propose the engineering of fast multiqubit interactions with tunable transmon-resonator couplings. This dynamics is obtained by the modulation of magnetic fluxes threading superconducting quantum interference device loops embedded in the transmon devices. We consider the feasibility of the proposed implementation in a realistic scenario and discuss potentia…
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable $ZZ$ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off-resonantly. We show tunable coupling over one order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of …
Superconducting Josephson junction qubits constitute the main current technology for many applications, including scalable quantum computers and thermal devices. Theoretical modeling of such systems is usually done within the two-level approximation. However, accurate theoretical modeling requires taking into account the influence of the higher excited states without limiting the system to the two-level qubit subspace. Here, we study the dynamics and control of a superconducting transmon using the numerically exact stochastic Liouville-von Neumann equation approach. We focus on the role of sta…
This thesis is set in the framework of superconducting transmon-type qubit architectures with special focus on two important types of coupling between qubits and harmonic resonators: transverse and longitudinal coupling. We will see that longitudinal coupling offers some remarkable advantages with respect to scalability and readout. This thesis will focus on a design, which combines both these coupling types in a single circuit and provides the possibility to choose between pure transverse and pure longitudinal or have both at the same time. We will start with an introduction to circuit quanti…
Analytical formulas are presented for simplified but useful qubit geometries that predict surface dielectric loss when its thickness is much less than the metal thickness, the limiting case needed for real devices. These formulas can thus be used to precisely predict loss and optimize the qubit layout. Surprisingly, a significant fraction of surface loss comes from the small wire that connects the Josephson junction to the qubit capacitor. Tapering this wire is shown to significantly lower its loss. Also predicted are the size and density of the two-level state (TLS) spectrum from individual s…
Utilizing optimal control to simulate a model Hamiltonian is an emerging strategy that leverages the intrinsic physics of a device with digital quantum simulation methods. Here we evaluate optimal control for probing the non-equilibrium properties of symmetry-protected topological (SPT) states simulated with superconducting hardware. Assuming a tunable transmon architecture, we cast evolution of these SPT states as a series of one- and two-site pulse optimization problems that are solved in the presence of leakage constraints. From the generated pulses, we numerical simulate time-dependent mel…
Artificial atoms realized by superconducting circuits offer unique opportunities to store and process quantum information with high fidelity. Among them, implementations of circuits that harness intrinsic noise protection have been rapidly developed in recent years. These noise-protected devices constitute a new class of qubits in which the computational states are largely decoupled from local noise channels. The main challenges in engineering such systems are simultaneously guarding against both bit- and phase-flip errors, and also ensuring high-fidelity qubit control. Although partial noise …
Quantum battery (QB) is the miniature energy storage and release device and plays a crucial role in future quantum technology. Here, an implementation scheme of a QB is proposed on a superconducting circuit which is composed by $N$ coupled transmon qubits and a one-dimensional transmission line resonator. We derive the Hamiltonian of the QB system and investigate its charging performance by considering three decay channels. We find that the presence of the decay channels suppresses the high oscillation of the energy storage process, thereby realizing a stable and powerful QB. In particular, co…
Fast CZ gate in hybrid fluxonium-transmon systems with tunable couplers
Nanjing University of Posts and Telecommunications（南京邮电大学）；Nanjing University（南京大学）；Shanxi University（山西大学）；Quantum Science Center of Guangdong-Hong Kong-Macao Greater Bay Area（粤港澳大湾区量子科学中心）
Electromagnetically induced transparency (EIT) has been realized in atomic systems, but fulfilling the EIT conditions for artificial atoms made from superconducting circuits is a more difficult task. Here we report an experimental observation of the EIT in a tunable three-dimensional transmon by probing the cavity transmission. To fulfill the EIT conditions, we tune the transmon to adjust its damping rates by utilizing the effect of the cavity on the transmon states. From the experimental observations, we clearly identify the EIT and Autler-Townes splitting (ATS) regimes as well as the transit…
Scaling the number of qubits while maintaining high-fidelity quantum gates remains a key challenge for quantum computing. Presently, superconducting quantum processors with >50-qubits are actively available. For such systems, fixed-frequency transmons are attractive due to their long coherence and noise immunity. However, scaling fixed-frequency architectures proves challenging due to precise relative frequency requirements. Here we employ laser annealing to selectively tune transmon qubits into desired frequency patterns. Statistics over hundreds of annealed qubits demonstrate an empirical tu…
Novel qubits with intrinsic noise protection constitute a promising route for improving the coherence of quantum information in superconducting circuits. However, many protected superconducting qubits exhibit relatively low transition frequencies, which could make their integration with conventional transmon circuits challenging. In this work, we propose and study a scheme for entangling a tunable transmon with a Cooper-pair parity-protected qubit, a paradigmatic example of a low-frequency protected qubit that stores quantum information in opposite Cooper-pair parity states on a superconductin…
We study the slowing, storing and releasing of microwave pulses in a superconducting circuits composed of two coplanar waveguide resonators and a superconducting transmon-type qubit. The quantum interference analogy to electromagnetically induced transparency is created in two coupled resonators. By tuning the resonance frequency of the transmon, we dynamically tune the effective coupling between the resonators. Via the modulation of the coupling, we show the tunable true time delay of microwave pulses at the single-photon level. We also store the microwave field in a high-Q resonator and rele…
Leakage outside of the qubit computational subspace poses a threatening challenge to quantum error correction (QEC). We propose a scheme using two leakage-reduction units (LRUs) that mitigate these issues for a transmon-based surface code, without requiring an overhead in terms of hardware or QEC-cycle time as in previous proposals. For data qubits we consider a microwave drive to transfer leakage to the readout resonator, where it quickly decays, ensuring that this negligibly affects the coherence within the computational subspace for realistic system parameters. For ancilla qubits we apply a…
Microwave photonic graph states provide a promising approach for robust quantum communication between remote superconducting chips using microwave photons. Recently, Besse et al. [Nat. Commun. 11, 4887 (2020)] demonstrated that 1D graph states can be generated using two transmon qubits. In this paper, we propose to use transmon qubits combined with other microwave devices to construct more complex graph states. Specifically, we consider 2D lattice and tree-like graph states. We compare the performance using fixed- versus tunable-frequency transmon qubits and also for different photonic qubit e…
Silicon-Germanium (SiGe) is a material that possesses a multitude of applications ranging from transistors to eletro-optical modulators and quantum dots. The diverse properties of SiGe also make it attractive to implementations involving superconducting quantum computing. Here we demonstrate the fabrication of transmon quantum bits on SiGe layers and investigate the microwave loss properties of SiGe at cryogenic temperatures and single photon microwave powers. We find relaxation times of up to 100 $μ$s, corresponding to a quality factor Q above 4 M for large pad transmons. The high Q values ob…
In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit -- photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the d…
Decoherence of superconducting transmon qubits is purported to be consistent with surface loss from two-level systems on the substrate surface. Here, we present a study of surface loss in transmon devices, explicitly designed to have varying sensitivities to different surface loss contributors. Our experiments also encompass two particular different sapphire substrates, which reveal the onset of a yet unknown additional loss mechanism outside of surface loss for one of the substrates. Tests across different wafers and devices demonstrate substantial variation, and we emphasize the importance o…
Single-photon sources are of great interest because they are key elements in different promising applications of quantum technologies. Here we demonstrate a highly efficient tunable on-demand microwave single-photon source based on a transmon qubit with the intrinsic emission efficiency above 98$\%$. The high efficiency ensures a negligible pure dephasing rate and the necessary condition for generation of indistinguishable photons. We provide an extended discussion and analysis of the efficiency of the photon generation. To further experimentally confirm the single-photon property of the sourc…
Multipartite entanglement is one of the core concepts in quantum information science with broad applications that span from condensed matter physics to quantum physics foundations tests. Although its most studied and tested forms encompass two-dimensional systems, current quantum platforms technically allow the manipulation of additional quantum levels. We report the experimental demonstration and certification of a high-dimensional multipartite entangled state in a superconducting quantum processor. We generate the three-qutrit Greenberger-Horne-Zeilinger state by designing the necessary puls…
Cross-resonance interactions are a promising way to implement all-microwave two-qubit gates with fixed-frequency qubits. In this work, we study the dependence of the cross-resonance interaction rate on qubit-qubit detuning and compare with a model that includes the higher levels of a transmon system. To carry out this study we employ two transmon qubits--one fixed frequency and the other flux tunable--to allow us to vary the detuning between qubits. We find that the interaction closely follows a three-level model of the transmon, thus confirming the presence of an optimal regime for cross-reso…
We report high-fidelity, quantum nondemolition, single-shot readout of a superconducting transmon qubit using a DC-biased superconducting low-inductance undulatory galvanometer(SLUG) amplifier. The SLUG improves the system signal-to-noise ratio by 7 dB in a 20 MHz window compared with a bare HEMT amplifier. An optimal cavity drive pulse is chosen using a genetic search algorithm, leading to a maximum combined readout and preparation fidelity of 91.9% with a measurement time of Tmeas = 200ns. Using post-selection to remove preparation errors caused by heating, we realize a combined preparation …
Superconducting qubits utilize the strong non-linearity of the Josephson junctions. Control over the Josephson nonlinearity, either by a current bias or by the magnetic flux, can be a valuable resource that brings tunability in the hybrid system consisting of superconducting qubits. To enable such a control, here we incorporate a fast-flux line for a frequency tunable transmon qubit in 3D cavity architecture. We investigate the flux-dependent dynamic range, relaxation from unconfined states, and the bandwidth of the flux-line. Using time-domain measurements, we probe transmon's relaxation from…
We have observed the Autler-Townes doublet in a superconducting Al/AlOx/Al transmon qubit that acts as an artificial atom embedded in a three-dimensional Cu microwave cavity at a temperature of 22 mK. Using pulsed microwave spectroscopy, the three lowest transmon levels are isolated, eliminating unwanted effects of higher qubit modes and cavity modes. The long coherence time (~40 us) of the transmon enables us to observe a clear Autler-Townes splitting at drive amplitudes much smaller than the transmon level anharmonicity (177 MHz). Three-level density matrix simulations with no free parameter…
