In the gate model of quantum computing, a program is typically decomposed into a sequence of 1- and 2-qubit gates that are realized as control pulses acting on the system. A key requirement for a scalable control system is that the qubits are addressable - that control pulses act only on the targeted qubits. The presence of control crosstalk makes this addressability requirement difficult to meet. In order to provide metrics that can drive requirements for decreasing crosstalk, we present three measurements that directly quantify the DC and AC flux crosstalk present between tunable transmons, with sensitivities as fine as 0.001%. We develop the theory to connect AC flux crosstalk measures to the infidelity of a parametrically activated two-qubit gate. We employ quantum process tomography in the presence of crosstalk to provide an empirical study of the effects of crosstalk on two-qubit gate fidelity.
Crosstalk is a major concern in the implementation of large-scale quantum computation since it can degrade the performance of qubit addressing and cause gate errors. Finding the origin of crosstalk and separating contributions from different channels are essential prerequisites for figuring out crosstalk mitigation schemes. Here, by performing circuit analysis of two coupled floating transmon qubits, we demonstrate that, even if the stray coupling, e.g., between a qubit and the drive line of its nearby qubit, is absent, microwave crosstalk between qubits can still exist due to the presence of …
Parasitic crosstalk in superconducting quantum devices is a leading limitation for quantum gates. We demonstrate the suppression of static ZZ crosstalk in a two-qubit, two-coupler superconducting circuit, where the frequency of a tunable coupler can be adjusted such that the ZZ interaction from each coupler destructively interfere. We verify the crosstalk elimination with simultaneous randomized benchmarking, and use a parametrically activated iSWAP interaction to achieve a Bell state preparation fidelity of 98.5% and a $\sqrt{\textrm{iSWAP}}$ gate fidelity of 94.8% obtained via quantum proces…
We describe an efficient and scalable framework for modeling crosstalk effects on quantum information processors. By applying optimal control techniques, we show how to tuneup arbitrary high-fidelity parallel operations on systems with substantial local and nonlocal crosstalk. Simulations show drastically lower error rates for a 2D square array of 100 superconducting transmon qubits. These results suggest that rather than striving to engineer away undesirable interactions during fabrication, we can largely mitigate their effects through careful characterization and control optimization.
Improving two-qubit gate performance and suppressing crosstalk are major, but often competing, challenges to achieving scalable quantum computation. In particular, increasing the coupling to realize faster gates has been intrinsically linked to enhanced crosstalk due to unwanted two-qubit terms in the Hamiltonian. Here, we demonstrate a novel coupling architecture for transmon qubits that circumvents the standard relationship between desired and undesired interaction rates. Using two fixed frequency coupling elements to tune the dressed level spacings, we demonstrate an intrinsic suppression o…
We develop a simulator for quantum computers composed of superconducting transmon qubits. The simulation model supports an arbitrary number of transmons and resonators. Quantum gates are implemented by time-dependent pulses. Nontrivial effects such as crosstalk, leakage to non-computational states, entanglement between transmons and resonators, and control errors due to the pulses are inherently included. The time evolution of the quantum computer is obtained by solving the time-dependent Schrödinger equation. The simulation algorithm shows excellent scalability on high-performance supercomput…
Magnetic flux tunability is an essential feature in most approaches to quantum computing based on superconducting qubits. Independent control of the fluxes in multiple loops is hampered by crosstalk. Calibrating flux crosstalk becomes a challenging task when the circuit elements interact strongly. We present a novel approach to flux crosstalk calibration, which is circuit model independent and relies on an iterative process to gradually improve calibration accuracy. This method allows us to reduce errors due to the inductive coupling between loops. The calibration procedure is automated and im…
Implementation of high-fidelity two-qubit operations is a key ingredient for scalable quantum error correction. In superconducting qubit architectures tunable buses have been explored as a means to higher fidelity gates. However, these buses introduce new pathways for leakage. Here we present a modified tunable bus architecture appropriate for fixed-frequency qubits in which the adiabaticity restrictions on gate speed are reduced. We characterize this coupler on a range of two-qubit devices achieving a maximum gate fidelity of $99.85\%$. We further show the calibration is stable over one day.
In this work we analyze the implementation of a control-phase gate through the resonance between the $|11\rangle$ and $|20\rangle$ states of two statically coupled transmons. We find that there are many different controls for the transmon frequency that implement the same gate with fidelities around $99.8\%$ ($T_1=T_2^{*}=17$ $μ$s) and $99.99\%$ ($T_1=T_2^{*}=300$ $μ$s) within a time that approaches the theoretical limit. All controls can be brought to this accuracy by calibrating the waiting time and the destination frequency near the $|11\rangle-|20\rangle$ resonance. However, some controls,…
We analyse the implementation of a fast nonadiabatic CZ gate between two transmon qubits with tuneable coupling. The gate control method is based on a theory of dynamical invariants which leads to reduced leakage and robustness against decoherence. The gate is based on a description of the resonance between the $|11\rangle$ and $|20\rangle$ using an effective Hamiltonian with the 6 lowest energy states. A modification of the invariants method allows us to take into account the higher-order perturbative corrections of this effective model. This enables a gate fidelity several orders of magnitud…
Simulations and analytical calculations that aim to describe flux-tunable transmons are usually based on effective models of the corresponding lumped-element model. However, when a control pulse is applied, in most cases it is not known how much the predictions made with the effective models deviate from the predictions made with the original lumped-element model. In this work we compare the numerical solutions of the time-dependent Schrödinger equation for both the effective and the lumped-element models, for microwave and unimodal control pulses (external fluxes). These control pulses are us…
Crosstalk is a leading source of failure in multiqubit quantum information processors. It can arise from a wide range of disparate physical phenomena, and can introduce subtle correlations in the errors experienced by a device. Several hardware characterization protocols are able to detect the presence of crosstalk, but few provide sufficient information to distinguish various crosstalk errors from one another. In this article we describe how gate set tomography, a protocol for detailed characterization of quantum operations, can be used to identify and characterize crosstalk errors in quantum…
We present the design of an inductively shunted transmon qubit with flux-tunable coupling to an embedded harmonic mode. This circuit construction offers the possibility to flux-choose between pure transverse and pure longitudinal coupling, that is coupling to the $σ_x$ or $σ_z$ degree of freedom of the qubit. While transverse coupling is the coupling type that is most commonly used for superconducting qubits, the inherently different longitudinal coupling has some remarkable advantages both for readout and for the scalability of a circuit. Being able to choose between both kinds of coupling in…
One of the key challenges in current Noisy Intermediate-Scale Quantum (NISQ) computers is to control a quantum system with high-fidelity quantum gates. There are many reasons a quantum gate can go wrong -- for superconducting transmon qubits in particular, one major source of gate error is the unwanted crosstalk between neighboring qubits due to a phenomenon called frequency crowding. We motivate a systematic approach for understanding and mitigating the crosstalk noise when executing near-term quantum programs on superconducting NISQ computers. We present a general software solution to allevi…
We report, in a sequence of notes, our work on the Alibaba Cloud Quantum Development Platform (AC-QDP). AC-QDP provides a set of tools for aiding the development of both quantum computing algorithms and quantum processors, and is powered by a large-scale classical simulator deployed on Alibaba Cloud. In this note, we simulate a distance-3 logical qubit encoded in the 17-qubit surface code using experimental noise parameters for transmon qubits in a planar circuit QED architecture. Our simulation features crosstalk induced by ZZ-interactions. We show that at the current-stage noise levels, cros…
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable $ZZ$ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off-resonantly. We show tunable coupling over one order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of …
This thesis is set in the framework of superconducting transmon-type qubit architectures with special focus on two important types of coupling between qubits and harmonic resonators: transverse and longitudinal coupling. We will see that longitudinal coupling offers some remarkable advantages with respect to scalability and readout. This thesis will focus on a design, which combines both these coupling types in a single circuit and provides the possibility to choose between pure transverse and pure longitudinal or have both at the same time. We will start with an introduction to circuit quanti…
The efficient implementation of many-body interactions in superconducting circuits allows for the realization of multipartite entanglement and topological codes, as well as the efficient simulation of highly correlated fermionic systems. We propose the engineering of fast multiqubit interactions with tunable transmon-resonator couplings. This dynamics is obtained by the modulation of magnetic fluxes threading superconducting quantum interference device loops embedded in the transmon devices. We consider the feasibility of the proposed implementation in a realistic scenario and discuss potentia…
Fast CZ gate in hybrid fluxonium-transmon systems with tunable couplers
Nanjing University of Posts and Telecommunications（南京邮电大学）；Nanjing University（南京大学）；Shanxi University（山西大学）；Quantum Science Center of Guangdong-Hong Kong-Macao Greater Bay Area（粤港澳大湾区量子科学中心）
Electromagnetically induced transparency (EIT) has been realized in atomic systems, but fulfilling the EIT conditions for artificial atoms made from superconducting circuits is a more difficult task. Here we report an experimental observation of the EIT in a tunable three-dimensional transmon by probing the cavity transmission. To fulfill the EIT conditions, we tune the transmon to adjust its damping rates by utilizing the effect of the cavity on the transmon states. From the experimental observations, we clearly identify the EIT and Autler-Townes splitting (ATS) regimes as well as the transit…
Quantum computers built with superconducting artificial atoms already stretch the limits of their classical counterparts. While the lowest energy states of these artificial atoms serve as the qubit basis, the higher levels are responsible for both a host of attractive gate schemes as well as generating undesired interactions. In particular, when coupling these atoms to generate entanglement, the higher levels cause shifts in the computational levels that leads to unwanted $ZZ$ quantum crosstalk. Here, we present a novel technique to manipulate the energy levels and mitigate this crosstalk via …
We study the slowing, storing and releasing of microwave pulses in a superconducting circuits composed of two coplanar waveguide resonators and a superconducting transmon-type qubit. The quantum interference analogy to electromagnetically induced transparency is created in two coupled resonators. By tuning the resonance frequency of the transmon, we dynamically tune the effective coupling between the resonators. Via the modulation of the coupling, we show the tunable true time delay of microwave pulses at the single-photon level. We also store the microwave field in a high-Q resonator and rele…
In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit -- photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the d…
