Isochronous mass spectrometry at the RIKEN Rare-RI Ring facility
D. Nagae, S. Omika, Y. Abe, Y. Yamaguchi, F. Suzaki, K. Wakayama, N. Tadano, R. Igosawa, K. Inomata, H. Arakawa, K. Nishimuro, T. Fujii, T. Mitsui, T. Yamaguchi… 展开作者
D. Nagae, S. Omika, Y. Abe, Y. Yamaguchi, F. Suzaki, K. Wakayama, N. Tadano, R. Igosawa, K. Inomata, H. Arakawa, K. Nishimuro, T. Fujii, T. Mitsui, T. Yamaguchi, T. Suzuki, S. Suzuki, T. Moriguchi, M. Amano, D. Kamioka, A. Ozawa, S. Naimi, Z. Ge, Y. Yanagisawa, H. Baba, S. Michimasa, S. Ota, G. Lorusso, Yu. A. Litvinov, M. Wakasugi, T. Uesaka, Y. Yano
本文介绍 RIKEN Rare-RI Ring 等时性储存环,通过测量粒子回旋时间并结合注入前速度或磁刚度修正,在首次调试中实现 $10^{-5}$ 量级质量精度,验证了其对短寿命核精密质量测量的能力。
摘要:
一台专用的等时性储存环,名为 Rare-RI Ring,已在 RIKEN 的 RI Beam Factory 建成,旨在对核素图中未知区域的原子核进行精密质量测量。Rare-RI Ring 采用等时性质谱技术,目标是在小于 1 ms 的测量时间内达到 $10^{-6}$ 的相对质量精度。该装置的性能通过对质量已知的中子丰中子核的质量测量得到了验证。每个粒子在注入储存环之前都测量其速度或磁刚度,在环内则精确测定其回旋时间。后者用于确定粒子质量,前者用于非等时性修正。在首次调试中实现了 $10^{-5}$ 量级的质量精度,这表明 Rare-RI Ring 是短寿命原子核质谱测量的强有力工具。
英文摘要:
A dedicated isochronous storage ring, named the Rare-RI Ring, was constructed at the RI Beam Factory of RIKEN, aiming at precision mass measurements of nuclei located in uncharted territories of the nuclear chart. The Rare-RI Ring employs the isochronous mass spectrometry technique with the goal to achieve a relative mass precision of $10^{-6}$ within a measurement time of less than 1 ms. The performance of the facility was demonstrated through mass measurements of neutron-rich nuclei with well-known masses. Velocity or magnetic rigidity is measured for every particle prior to its injection into the ring, wherein its revolution time is accurately determined. The latter quantity is used to determine the mass of the particle, while the former one is needed for non-isochronicity corrections. Mass precisions on the order of $10^{-5}$ were achieved in the first commissioning, which demonstrates that Rare-RI Ring is a powerful tool for mass spectrometry of short-lived nuclei.
Charge resolution in the isochronous mass spectrometry and the mass of $^{51}$Co
重离子储存环等离子体质谱(IMS)是测量短寿命核质量的有力工具。在IMS实验中,通过精确测量储存在环中的离子的旋转时间来确定质量。然而,对于具有几乎相同的质荷比(m/q)的粒子,无法解析旋转时间。为了克服这一限制并提取m/q比非常接近的离子种类对的准确旋转时间,在我们早期的粒子识别工作中,我们分析了基于发射的检测器的定时信号的幅度。次级电子。这里,通过考虑信号幅度、检测效率和环中存储的离子的数量,进一步改进了先前的数据分析方法。在数据分析中引入了一个敏感的Z依赖性参数,导致$^{34}$ Ar $^{18+}$和$^{51}$ Co $^{27+}$的更好分辨率,A/Z=17/9。虽然$^{34}$ Ar $^{18+}$和$^{51}$ Co $^{27+}$的时间差仅为1.8 ps,但它们的平均公转时间却被推导出来。这些离子的未校正的重叠峰具有7.7ps的半峰全宽。$^{51}$ Co的质量过剩被确定为-27332(41)keV,这与先前的值-27342(48)keV一致。
Charge and frequency resolved isochronous mass spectrometry in storage rings: First direct mass measurement of the short-lived neutron-deficient $^{51}$Co nuclide
储存环中单个离子的旋转频率测量需要复杂的定时探测器。用于这种检测器的常见方法之一是检测由于所存储的离子的穿透而从薄箔释放的次级电子。提出了一种基于次级电子强度分析的新方法,该方法可以在测量离子旋转频率的同时确定离子的电荷。虽然$^{51}$ Co $^{27+}$和$^{34}$ Ar $^{18+}$离子的质荷比几乎相同,因而不能在储存环中分辨,但应用新方法首次确定了短寿命$^{51}$ Co的质量过剩为ME($^{51}$ Co)=-27342(48)keV.壳模型计算的$fp$壳核相比,新的数据表明,需要包括同位旋非守恒力。
Precision masses of neutron-rich platinum and gold nuclei reveal enhanced $N=126$ shell strength below doubly-magic $^{208}$Pb
GSI Helmholtzzentrum für Schwerionenforschung GmbH(德国重离子研究中心);Institut für Kernphysik, Universität zu Köln(科隆大学核物理研究所);State Key Laboratory of Heavy Ion Science and Technology, Institute of Modern Physics, Chinese Academy of Sciences(中国科学院近代物理研究所重离子科学和技术国家重点实验室);Institut für Kernphysik, Technische Universität Darmstadt(达姆施塔特工业大学核物理研究所);Department of Physics, University of Novi Sad(诺维萨德大学物理系);Max-Planck Institut für Kernphysik(马克斯·普朗克核物理研究所)