Simulations and measurements on selective laser etching of display glasses are reported. By means of a holographic 3D beam splitter, ultrashort laser pulses are focused inside the volume of a glass sample creating type III modifications along a specific trajectory like pearls on a string. Superimposed by a feed of the glass sample a full 3D area of modifications is achieved building the cornerstone for subsequent etch processes. Based on KOH the modifications are selectively etched at a much higher rate compared to unmodified regions resulting in a separation of the glass along the trajectory of modifications. For gaining further insight into the etch process, we perform simulations on this wet chemical process and compare it to our experimental results.
Microfabrication of Paul wheel trap chip in fused silica by selective laser etching
Institute of Scientific Instruments of the Czech Academy of Sciences(捷克科学院科学仪器研究所);Institute of Physical Engineering, Faculty of Mechanical Engineering, Brno University of Technology(Brno理工大学机械工程学院物理工程研究所)
Ultra-high-speed high-resolution laser lithography for lithium niobate integrated photonics
光刻辅助化学机械蚀刻(PLACE)是一种专门开发用于在薄膜锂酸盐(TFLN)上制造高质量大规模光子集成电路(PIC)的技术,其使得能够制造从高质量(高Q)微谐振器和低损耗波导到电光(EO)可调谐激光器和波导放大器的一系列PIC构建块。针对PIC器件和系统的高产量制造,我们已经开发了一种超高速高分辨率激光光刻制造系统,采用高重复频率飞秒激光和高速多边形激光扫描仪,通过该光刻制造系统,在200 nm的空间分辨率下,光刻制造效率为4.8 cm 2/h。我们展示了基于TFLN的光子结构,光学相位掩模以及彩色印刷的晶圆级制造
Local droplet etching-assisted quantum dot epitaxy for telecom C-band quantum light emitters
DTU Electro, Technical University of Denmark(丹麦技术大学电气工程系);DTU Nanolab, Technical University of Denmark(丹麦技术大学纳米实验室);NanoPhoton-Center for Nanophotonics, Technical University of Denmark(丹麦技术大学纳米光子学中心);Institute of Theoretical Physics, Wrocław University of Science and Technology(弗罗茨瓦夫科技大学理论物理研究所);Department of Materials Science, University of Milano-Bicocca(米兰比可卡大学材料科学系)