金属薄膜的最大等离激元热导率
Maximum plasmon thermal conductivity of a thin metal film
AI总结:
本研究考虑金属介电常数的厚度依赖性,推导薄膜与厚膜极限下等离激元热导率的解析解,明确其与电子热导率的正比关系,得出高等离子体频率低阻尼金属可实现最大热导率及增强比,14nm厚10cm长铝膜热导率提升达53.5%。
摘要:
由于表面等离激元极化激元(surface plasmon polaritons, SPPs)的传播长度相较于其波长极长,一直被视为提升金属薄膜热导率的关键因素。本研究在考虑金属介电常数随厚度变化的前提下,探究了等离激元热导率达到最大值的条件。我们推导了薄膜极限与厚膜极限下等离激元热导率的解析解,用以分析金属与衬底的介电常数产生的影响。从等离激元热导率的解析解中,我们推导出:基于维德曼-弗兰兹定律,等离激元热导率与电子热导率成正比。此外,我们还分析了通过SPPs实现的热导率增强比达到最大值的条件。具有高等离子体频率、低阻尼系数的金属,是实现最大等离激元热导率以及在各类金属中实现最大热导率增强比的理想材料。值得注意的是,长度为10 cm、厚度为14 nm的铝膜展现出最优的面内SPPs传热性能,在无损耗玻璃衬底上,其热导率相较于电子热导率提升了53.5%。
英文摘要:
Due to their extremely long propagation lengths compared to the wavelengths, surface plasmon polaritons (SPPs) have been considered as a key in enhancing thermal conductivity in thin metal films. This study explores the conditions at which the plasmon thermal conductivity is maximized, considering the thickness-dependent metal permittivity. We derived the analytical solutions for the plasmon thermal conductivity in both the thin-film and thick-film limits to analyze the effect of the permittivities of metals and substrates. From the analytical solutions of plasmon thermal conductivity, we deduced that the plasmon thermal conductivity is proportional to the electron thermal conductivity based on the Wiedemann-Franz law. Additionally, we analyzed the conditions where the enhancement ratio of the thermal conductivity via SPPs is maximized. Metals with high plasma frequency and low damping coefficient are desirable for achieving the maximum plasmon thermal conductivity as well as the maximum enhancement ratio of thermal conductivity among metals. Significantly, 10-cm-long and 14-nm-thick Al film demonstrates most superior in-plane heat transfer via SPPs, showing a 53.5\% enhancement in thermal conductivity compared to its electron thermal counterpart on a lossless glass substrate.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。