We study experimentally the dynamics of one and two ball-chains settling under gravity in a very viscous fluid at a Reynolds number much smaller than unity. We demonstrate that single ball-chains in most cases do not tend to be planar and often rotate, not keeping the ends at the same horizontal level. Shorter ball-chains usually form shapes resembling distorted U, and longer ones in the early stage of the evolution form a shape resembling distorted W, and later deform non-symmetrically and significantly out of plane. This behaviour is reproduced in our numerical simulations for a single very elastic filament, with the use of the bead model and multipole expansion of the Stokes equations, corrected for lubrication and implemented in the precise Hydromultipole numerical codes. In our experiments, two ball-chains, initially one above the other, later move away or approach each other, for a larger or smaller initial distance, respectively.
We investigate regular configurations of a small number of particles settling under gravity in a viscous fluid. The particles do not touch each other and can move relative to each other. The dynamics is analyzed in the point-particle approximation. A family of regular configurations is found with periodic oscillations of all the settling particles. The oscillations are shown to be robust under some out-of-phase rearrangements of the particles. In the presence of an additional particle above such a regular configuration, the particle periodic trajectories are horizontally repelled from the symm…
The equilibrium state of a flexible fiber settling in a viscous fluid is examined using a combination of macroscopic experiments, numerical simulations and scaling arguments. We identify three regimes having different signatures on this equilibrium configuration of the elastic filament: weak and large deformation regimes wherein the drag is proportional to the settling velocity as expected in Stokes flow and an intermediate elastic reconfiguration regime where the filament deforms to adopt a shape with a smaller drag which is no longer linearly proportional to the velocity.
The motion of flexible fibers through structured fluidic environments is ubiquitous in nature and industrial applications. Most often, their dynamics results from the complex interplay between internal elastic stresses, contact forces and hydrodynamic interactions with the walls and obstacles. By means of numerical simulations, experiments and analytical predictions, we investigate the dynamics of flexible fibers settling in a viscous fluid embedded with obstacles of arbitrary shapes. We identify and characterize two types of events: trapping and gliding, for which we detail the mechanisms at …
Max-Planck-Institute for Mathematics in the Sciences（马克斯·普朗克科学促进学会数学研究所）；Univ. Bordeaux, CNRS, LOMA, UMR 5798（波尔多大学）；Department of Applied Mechanics, IIT Madras（印度马德拉斯理工学院应用力学系）；Department of Bioengineering, Stanford University（斯坦福大学生物工程系）；International Centre for Theoretical Sciences（国际理论科学中心）
The evolution of suspension drops sedimenting under gravity in a viscous fluid close to a vertical wall was studied experimentally and numerically with the use of the point-force model, in the Stokes flow regime. The fluid inside and outside the drop was identical. The initial distribution of the suspended solid heavy particles was uniform inside a spherical volume. In the experiments and in the simulations, the suspension drops evolved qualitatively in the same way as in an unbounded fluid. However, it was observed, both experimentally and numerically that, on the average, the destabilization…
If a droplet is placed on a substrate with a conical shape it spontaneously starts to spread in the direction of a growing fibre radius. We describe this capillary spreading dynamics by developing a lubrication approximation on a cone and by the perturbation method of matched asymptotic expansions. Our results show that the droplet appears to adopt a quasi-static shape and the predictions of the droplet shape and spreading velocity from the two mathematical models are in excellent agreement for a wide range of slip lengths, cone angles and equilibrium contact angles. At the contact line region…
Taylor's swimming sheet is a classical model of microscale propulsion and pumping. Many biological fluids and substances are fibrous, having a preferred direction in their microstructure; for example cervical mucus is formed of polymer molecules which create an oriented fibrous network. Moreover, suspensions of elongated motile cells produce a form of active oriented matter. To understand how these effects modify viscous propulsion, we extend Taylor's classical model of small-amplitude zero-Reynolds-number propulsion of a 'swimming sheet' via the transversely-isotropic fluid model of Ericksen,…
Hydrodynamic interactions between two identical elastic dumbbells settling under gravity in a viscous fluid at low-Reynolds-number are investigated within the point-particle model. Evolution of a benchmark initial configuration is studied, in which the dumbbells are vertical and their centres are aligned horizontally. Rigid dumbbells and pairs of separate beads starting from the same positions tumble periodically while settling down. We find that elasticity (which breaks time-reversal symmetry of the motion) significantly affects the system's dynamics. This is remarkable taking into account th…
We perform $3$D numerical simulations to investigate the sedimentation of a single sphere in the absence and presence of a simple cross shear flow in a yield stress fluid with weak inertia. In our simulations, the settling flow is considered to be the primary flow, whereas the linear cross shear flow is a secondary flow with amplitude $10\%$ of the primary flow. To study the effects of elasticity and plasticity of the carrying fluid on the sphere drag as well as the flow dynamics, the fluid is modeled using the elastovisco-plastic (EVP) constitutive laws proposed by \cite{saramito2009new}. The…
We study the settling of finite-size rigid spheres in sustained homogeneous isotropic turbulence (HIT) by direct numerical simulations using an immersed boundary method to account for the dispersed solid phase. We study semi-dilute suspensions at different Galileo numbers, Ga. The Galileo number is the ratio between buoyancy and viscous forces, and is here varied via the solid-to-fluid density ratio. The focus is on particles that are slightly heavier than the fluid. We find that in HIT, the mean settling speed is less than that in quiescent fluid; in particular, it reduces by 6%-60% with resp…
We study the behaviour of circular flexible loops sedimenting in a viscous fluid by numerical simulations and linear stability analysis. The numerical model involves a local slender-body theory approximation for the flow coupled to the Euler-Bernoulli elastic forces for an inextensible fibre. Starting from an inclined circle, we simulate the dynamics using truncated Fourier modes to observe three distinct regimes of motion: absolute stability, two-, and three-dimensional dynamics, depending on therelative importance of elastic and gravitational forces. We identify the governing parameter and d…
Part I of this study presented a stochastic theory for the clustering of monodisperse, rapidly settling, low-Stokes-number particle pairs in homogeneous isotropic turbulence. The theory involved the development of closure approximations for the drift and diffusion fluxes in the probability density function (PDF) equation for pair relative positions. In this Part II paper, the theory is quantitatively analyzed by comparing its predictions of particle clustering with data from direct numerical simulations (DNS) of isotropic turbulence containing particles settling under gravity. DNS were perform…
We study the settling of solid particles within a viscous incompressible fluid contained in a two-dimensional channel, where the mass density of the particles is slightly greater than that of the fluid. The fluid-structure interaction problem is simulated numerically using the immersed boundary method, with an added mass term that is incorporated using a Boussinesq approximation. Simulations are performed with a single circular particle, and also with two particles in various initial configurations. The terminal settling velocities for the particles correspond closely with both theoretical and…
Many biological materials such as cervical mucus and collagen gel possess a fibrous micro-structure. This micro-structure affects the emergent mechanical properties of the material, and hence the functional behaviour of the system. We consider the canonical problem of stretching a thin sheet of transversely-isotropic viscous fluid as a simplified version of the spinnbarkeit test for cervical mucus. We propose a novel solution to the model constructed by Green & Friedman by manipulating the model to a form amenable to arbitrary Lagrangian-Eulerian techniques. The system of equations, reduced by…
An array of spheres descending slowly through a viscous fluid always clumps [J.M. Crowley, J. Fluid Mech. {\bf 45}, 151 (1971)]. We show that anisotropic particle shape qualitatively transforms this iconic instability of collective sedimentation. In experiment and theory on disks, aligned facing their neighbours in a horizontal one-dimensional lattice and settling at Reynolds number $\sim 10^{-4}$ in a quasi-two-dimensional slab geometry, we find that for large enough lattice spacing the coupling of disk orientation and translation rescues the array from the clumping instability. Despite the a…
The gravity-driven motion of rigid particles in a viscous fluid is relevant in many natural and industrial processes, yet this has mainly been investigated for spherical particles. We therefore consider the sedimentation of non-spherical (spheroidal) isolated and particle pairs in a viscous fluid via numerical simulations using the Immersed Boundary Method. The simulations performed here show that the critical Galileo number for the onset of secondary motions decreases as the spheroid aspect ratio departs from 1. Above this critical threshold, oblate particles perform a zigzagging motion where…
We investigate the linear properties of the steady and axisymmetric stress-driven spin-down flow of a viscous fluid inside a spherical shell, both within the incompressible and anelastic approximations, and in the asymptotic limit of small viscosities. From boundary layer analysis, we derive an analytical geostrophic solution for the 3D incompressible steady flow, inside and outside the cylinder $\mathcal{C}$ that is tangent to the inner shell. The Stewartson layer that lies on $\mathcal{C}$ is composed of two nested shear layers of thickness $O(E^{2/7})$ and $O(E^{1/3})$. We derive the lowest…
