Deep learning is envisioned to play a key role in the design of future wireless receivers. A popular approach to design learning-aided receivers combines deep neural networks (DNNs) with traditional model-based receiver algorithms, realizing hybrid model-based data-driven architectures. Such architectures typically include multiple modules, each carrying out a different functionality dictated by the model-based receiver workflow. Conventionally trained DNN-based modules are known to produce poorly calibrated, typically overconfident, decisions. Consequently, incorrect decisions may propagate through the architecture without any indication of their insufficient accuracy. To address this problem, we present a novel combination of Bayesian deep learning with hybrid model-based data-driven architectures for wireless receiver design. The proposed methodology, referred to as modular Bayesian deep learning, is designed to yield calibrated modules, which in turn improves both accuracy and calibration of the overall receiver. We specialize this approach for two fundamental tasks in multiple-input multiple-output (MIMO) receivers - equalization and decoding. In the presence of scarce data, the ability of modular Bayesian deep learning to produce reliable uncertainty measures is consistently shown to directly translate into improved performance of the overall MIMO receiver chain.
The stringent requirements on reliability and processing delay in the fifth-generation ($5$G) cellular networks introduce considerable challenges in the design of massive multiple-input-multiple-output (M-MIMO) receivers. The two main components of an M-MIMO receiver are a detector and a decoder. To improve the trade-off between reliability and complexity, a Bayesian concept has been considered as a promising approach that enhances classical detectors, e.g. minimum-mean-square-error detector. This work proposes an iterative M-MIMO detector based on a Bayesian framework, a parallel interference…
Much stringent reliability and processing latency requirements in ultra-reliable-low-latency-communication (URLLC) traffic make the design of linear massive multiple-input-multiple-output (M-MIMO) receivers becomes very challenging. Recently, Bayesian concept has been used to increase the detection reliability in minimum-mean-square-error (MMSE) linear receivers. However, the latency processing time is a major concern due to the exponential complexity of matrix inversion operations in MMSE schemes. This paper proposes an iterative M-MIMO receiver that is developed by using a Bayesian concept a…
Multiple-input multiple-output (MIMO) systems are required to communicate reliably at high spectral bands using a large number of antennas, while operating under strict power and cost constraints. In order to meet these constraints, future MIMO receivers are expected to operate with low resolution quantizers, namely, utilize a limited number of bits for representing their observed measurements, inherently distorting the digital representation of the acquired signals. The fact that MIMO receivers use their measurements for some task, such as symbol detection and channel estimation, other than r…
In this letter, we extend the sparse Kronecker-product (SKP) coding scheme, originally designed for the additive white Gaussian noise (AWGN) channel, to multiple input multiple output (MIMO) unsourced random access (URA). With the SKP coding adopted for MIMO transmission, we develop an efficient Bayesian iterative receiver design to solve the intended challenging trilinear factorization problem. Numerical results show that the proposed design outperforms the existing counterparts, and that it performs well in all simulated settings with various antenna sizes and active-user numbers.
DOA estimation for massive multiple-input multiple-output (MIMO) system can provide ultra-high-resolution angle estimation. However, due to the high computational complexity and cost of all digital MIMO systems, a hybrid analog digital (HAD) structure MIMO was proposed. In this paper, a fast ambiguous phase elimination method is proposed to solve the problem of direction-finding ambiguity caused by the HAD MIMO. Only two-data-blocks are used to realize DOA estimation. Simulation results show that the proposed method can greatly reduce the estimation delay with a slight performance loss.
Massive multiple-input-multiple-output (M-MIMO) features a capability for spatial multiplexing of large number of users. This number becomes even more extreme in extra-large (XL-MIMO), a variant of M-MIMO where the antenna array is of very large size. Yet, the problem of signal processing complexity in M-MIMO is further exacerbated by the XL size of the array. The basic processing problem boils down to a sparse system of linear equations that can be addressed by the randomized Kaczmarz (RK) algorithm. This algorithm has recently been applied to devise low-complexity M-MIMO receivers; however, …
In this contribution, the evaluation of the diversity of the MIMO MMSE receiver is addressed for finite rates in both flat fading channels and frequency selective fading channels with cyclic prefix. It has been observed recently that in contrast with the other MIMO receivers, the MMSE receiver has a diversity depending on the aimed finite rate, and that for sufficiently low rates the MMSE receiver reaches the full diversity - that is, the diversity of the ML receiver. This behavior has so far only been partially explained. The purpose of this paper is to provide complete proofs for flat fading…
The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in terms of cost, power, and size. An emerging technology to realize massive MIMO receivers of reduced cost and power consumption is based on dynamic metasurface antennas (DMAs), which inherently implem…
Despite the extensive use of a centralized approach to design receivers at the base station for massive multiple-input multiple-output (M-MIMO) systems, their actual implementation is a major challenge due to several bottlenecks imposed by the large number of antennas. One way to deal with this problem is by fully decentralizing the classic zero-forcing receiver across multiple processing nodes based on the gradient descent method. In this paper, we first explicitly relate this decentralized receiver to a distributed version of the Kaczmarz algorithm and to the use of the successive interferen…
In most MIMO systems, the family of waterfall error curves, calculated at different spectral efficiencies, are asymptotically parallel at high SNR. In other words, most MIMO systems exhibit a single diversity value for all fixed rates. The MIMO MMSE receiver does not follow this pattern and exhibits a varying diversity in its family of error curves. This work analyzes this interesting behavior of the MMSE MIMO receiver and produces the MMSE MIMO diversity at all rates. The diversity of the quasi-static flat-fading MIMO channel consisting of any arbitrary number of transmit and receive antennas…
We propose a deep-learning approach for the joint MIMO detection and channel decoding problem. Conventional MIMO receivers adopt a model-based approach for MIMO detection and channel decoding in linear or iterative manners. However, due to the complex MIMO signal model, the optimal solution to the joint MIMO detection and channel decoding problem (i.e., the maximum likelihood decoding of the transmitted codewords from the received MIMO signals) is computationally infeasible. As a practical measure, the current model-based MIMO receivers all use suboptimal MIMO decoding methods with affordable …
In this work, we propose the joint optimization of the automatic gain control (AGC), which works in the remote radio heads (RHHs), and a low-resolution aware (LRA) linear receive filter based on the minimum mean square error (MMSE), which works on the baseband unit (BBU) pool, for large-scale multi-user multiple-input multiple-output (MU-MIMO) systems with coarsely quantized signals in cloud radio access networks. We develop successive interference cancellation receivers based on the proposed joint AGC and LRA-MMSE (AGC-LRA-MMSE) approach. An analysis of the achievable sum rates is also carrie…
Orthogonal time-frequency space (OTFS) scheme, which transforms a time and frequency selective channel into an almost non-selective channel in the delay-Doppler domain, establishes reliable wireless communication for high-speed moving devices. This work designs and analyzes low-complexity zero-forcing (LZ) and minimum mean square error (LM) receivers for multiple-input multiple-output (MIMO)-OTFS systems with perfect and imperfect receive channel state information (CSI). The proposed receivers provide exactly the same solution as that of the conventional counterparts, and reduce the complexity…
In this paper, we investigate a multiple-input multiple-output (MIMO) system with simultaneous information detection (ID) and energy harvesting (EH) receiver. This point-to-point system operates in the vicinity of active interfering nodes. The receiver performs power splitting where a portion of received signal undergoes analog energy harvesting circuitry. Further, the information content of the other portion is extracted after performing digital beamforming. In this MIMO system, information carrier eigen-modes are not necessarily the eigen-modes with the strongest energy level. Hence, it is b…
The Gaussian multiple-input multiple-output (MIMO) multi-receiver wiretap channel is studied in this paper. The base station broadcasts confidential messages to K intended users while keeping the messages secret from an eavesdropper. The capacity of this channel has already been characterized by applying dirty-paper coding and stochastic encoding. However, K factorial encoding orders may need to be enumerated for that, which makes the problem intractable. We prove that there exists one optimal encoding order and reduced the K factorial times to a one-time encoding. The optimal encoding order i…
We consider a multi-user multiple-input multiple-output (MU-MIMO) system that uses orthogonal frequency division multiplexing (OFDM). Several receivers are developed for data detection of MU-MIMO transmissions where two users share the same OFDM time and frequency resources. The receivers have partial state information about the MU-MIMO transmission with each receiver having knowledge of the MU-MIMO channel, however the modulation constellation of the co-scheduled user is unknown. We propose a joint maximum likelihood (ML) modulation classification of the co-scheduled user and data detection r…
A new architecture called integer-forcing (IF) linear receiver has been recently proposed for multiple-input multiple-output (MIMO) fading channels, wherein an appropriate integer linear combination of the received symbols has to be computed as a part of the decoding process. In this paper, we propose a method based on Hermite-Korkine-Zolotareff (HKZ) and Minkowski lattice basis reduction algorithms to obtain the integer coefficients for the IF receiver. We show that the proposed method provides a lower bound on the ergodic rate, and achieves the full receive diversity. Suitability of complex …
In this paper we investigate the achievable rate of LOS MIMO systems that use 1-bit quantization and spatial oversampling at the receiver. We propose that by using additional antennas at the receiver, the loss incurred due to the strong limitation of the quantization can be decreased. Mutual information results show that considerable rate gains can be achieved depending on the number and arrangement of the antennas. In some of the cases, even the full available rate from the transmitter can be attained. Furthermore, the results also reveal that two-dimensional antenna arrays can benefit more f…
We propose blind adaptive multi-input multi-output (MIMO) linear receivers for DS-CDMA systems using multiple transmit antennas and space-time block codes (STBC) in multipath channels. A space-time code-constrained constant modulus (CCM) design criterion based on constrained optimization techniques is considered and recursive least squares (RLS) adaptive algorithms are developed for estimating the parameters of the linear receivers. A blind space-time channel estimation method for MIMO DS-CDMA systems with STBC based on a subspace approach is also proposed along with an efficient RLS algorithm…
The updated physical layer standard of the fifth generation wireless communication suggests the necessity of a rapid prototyping platform. To this end, we develop RaPro, a multi-core general purpose processor-based massive multiple-input-multiple-output (MIMO) prototyping platform. To enhance RaPro, high performance detection and beamforming are needed, whereas both of them request for accurate channel state information (CSI). In this paper, linear minimum mean square error (LMMSE)-based channel estimator is adopted and encapsulated inside RaPro to gain more accurate CSI. Considering the high …
Linear receivers are considered as an attractive low-complexity alternative to optimal processing for multi-antenna MIMO communications. In this paper we characterize the performance of MMSE MIMO receivers in the limit of large antenna numbers in the presence of channel correlations. Using the replica method, we generalize our results obtained in arXiv:0810.0883 to Kronecker-product correlated channels and calculate the asymptotic mean and variance of the mutual information of a MIMO system of parallel MMSE subchannels. The replica method allows us to use the ties between the optimal receiver …
The question of whether the degrees of freedom (DoF) of multi-user networks can be enhanced even under isotropic fading and no channel state information (or output feedback) at the transmitters (CSIT) is investigated. Toward this end, the two-user MIMO (multiple-input, multiple-output) broadcast and interference channels are studied with no side-information whatsoever at the transmitters and with receivers equipped with full-duplex radios. The full-duplex feature allows for receiver cooperation because each receiver, in addition to receiving the signals sent by the transmitters, can also simul…
We design jamming resistant receivers to enhance the robustness of a massive MIMO uplink channel against jamming. In the pilot phase, we estimate not only the desired channel, but also the jamming channel by exploiting purposely unused pilot sequences. The jamming channel estimate is used to construct the linear receive filter to reduce impact that jamming has on the achievable rates. The performance of the proposed scheme is analytically and numerically evaluated. These results show that the proposed scheme greatly improves the rates, as compared to conventional receivers. Moreover, the propo…
Cell-Free Massive MIMO comprises a large number of distributed single-antenna access points (APs) serving a much smaller number of users. There is no partitioning into cells and each user is served by all APs. In this paper, the uplink performance of cell-free systems with minimum mean squared error (MMSE) and large scale fading decoding (LSFD) receivers is investigated. The main idea of LSFD receiver is to maximize achievable throughput using only large scale fading coefficients between APs and users. Capacity lower bounds for MMSE and LSFD receivers are derived. An asymptotic approximation f…
Semi-definite relaxation (SDR) detector has been demonstrated to be successful in approaching maximum likelihood (ML) performance while the time complexity is only polynomial. We propose a new receiver jointly utilizing the forward error correction (FEC) code information in the SDR detection process. Strengthened by the code constraints, the joint SDR detector provides soft information of much improved reliability to downstream decoder and therefore outperforms existing receivers with substantial gain.
We consider unsourced random access with MIMO receiver - a crucial communication scenario for future 5G/6G wireless networks. We perform a projection-based decoder analysis and derive energy efficiency achievability bounds when channel state information is unknown at transmitters and the receiver (no-CSI scenario). The comparison to the maximum-likelihood (ML) achievability bounds by Gao et al. (2023) is performed. We show that there is a region where the new bound outperforms the ML bound. The latter fact should not surprise the reader as both decoding criteria are suboptimal when considering…
This letter introduces an analytical model that gives the asymptotic cumulative number of molecules absorbed by spherical receivers in a diffusive multiple-input multiple-output (MIMO) molecular communication (MC) system with pointwise transmitters. In the proposed model, the reciprocal effect among the fully absorbing (FA) receivers is described by using the concept of fictitious pointwise negative source of molecules, the best position of which for each spherical receiver being defined by its absorption barycenter. We show that there is an agreement between the proposed asymptotic model and …
In this paper, we propose a new combined message passing algorithm which allows belief propagation (BP) and mean filed (MF) applied on a same factor node, so that MF can be applied to hard constraint factors. Based on the proposed message passing algorithm, a iterative receiver is designed for MIMO-OFDM systems. Both BP and MF are exploited to deal with the hard constraint factor nodes involving the multiplication of channel coefficients and data symbols to reduce the complexity of the only BP used. The numerical results show that the BER performance of the proposed low complexity receiver clo…
High resolution analog to digital converters (ADCs) are conventionally used at the receiver terminals to store an accurate digital representation of the received signal, thereby allowing for reliable decoding of transmitted messages. However, in a wide range of applications, such as communication over millimeter wave and massive multiple-input multiple-output (MIMO) systems, the use of high resolution ADCs is not feasible due to power budget limitations. In the conventional fully digital receiver design, where each receiver antenna is connected to a distinct ADC, reducing the ADC resolution le…
Multiple antenna systems have been extensively used by standards designing multi-gigabit communication systems operating in bandwidth of several GHz. In this paper, we study the use of transmitter (Tx) beamforming techniques to improve the performance of a MIMO system with a low precision ADC. We motivate an approach to use eigenmode transmit beamforming (which imposes a diagonal structure in the complete MIMO system) and use an eigenmode power allocation which minimizes the uncoded BER of the finite precision system. Although we cannot guarantee optimality of this approach, we observe that ev…
In this paper we present low-complexity blind multi-input multi-output (MIMO) adaptive linear multiuser receivers for direct sequence code division multiple access (DS-CDMA) systems using multiple transmit antennas and space-time block codes (STBC) in multipath channels. A space-time code-constrained constant modulus (CCM) design criterion based on constrained optimization techniques and low-complexity stochastic gradient (SG) adaptive algorithms are developed for estimating the parameters of the space-time linear receivers. The receivers are designed by exploiting the unique structure imposed…
This paper investigates the achievable sum rate of multiple-input multiple-output (MIMO) wireless systems employing linear minimum mean-squared error (MMSE) receivers. We present a new analytic framework which unveils an interesting connection between the achievable sum rate with MMSE receivers and the ergodic mutual information achieved with optimal receivers. This simple but powerful result enables the vast prior literature on ergodic MIMO mutual information to be directly applied to the analysis of MMSE receivers. The framework is particularized to various Rayleigh and Rician channel scenar…
In this work, we develop a new iterative turbo receiver for LDPC-coded multi-antenna systems based on semidefinite relaxation (SDR). For a classical turbo receiver, forward error correction (FEC) code is only used at decoder. Nonetheless, by taking advantage of FEC code in the detection stage, our proposed SDR detector can output extrinsic information with much improved reliability to the decoder. We also propose a simplified SDR turbo receiver that solves only one SDR problem per codeword instead of solving multiple SDR problems in the iterative turbo processing. This scheme significantly red…
High hardware cost and high power consumption of massive multiple-input and multiple output (MIMO) are two challenges for the future wireless communications including beyond fifth generation (B5G) and sixth generation (6G). Adopting the low-resolution analog-to-digital converter (ADC) is viewed as a promising solution. Additionally, the direction of arrival (DOA) estimation is an indispensable technology for beam alignment and tracking in massive MIMO systems. Thus, in this paper, the performance of DOA estimation with mixed-ADC structure is firstly investigated. The Cramer-Rao lower bound (CR…
We present the derivation of post-processing SNR for Minimum-Mean-Squared-Error (MMSE) receivers with imperfect channel estimates, and show that it is an accurate indicator of the error rate performance of MIMO systems in the presence of channel estimation error. Simulation results show the tightness of the analysis.
We design a jamming-resistant receiver scheme to enhance the robustness of a massive MIMO uplink system against jamming. We assume that a jammer attacks the system both in the pilot and data transmission phases. The key feature of the proposed scheme is that, in the pilot phase, we estimate not only the legitimate channel, but also the jamming channel by exploiting a purposely unused pilot sequence. The jamming channel estimate is used to constructed linear receive filters that reject the impact of the jamming signal. The performance of the proposed scheme is analytically evaluated using asymp…
Use of low resolution analog to digital converters (ADCs) is an effective way to reduce the high power consumption of millimeter wave (mmWave) receivers. In this paper, a receiver with low resolution ADCs based on adaptive thresholds is considered in downlink mmWave communications in which the channel state information is not known a-priori and acquired through channel estimation. A performance comparison of low-complexity algorithms for power and ADC allocation among transmit and receive terminals, respectively, is provided. Through simulation of practical mmWave cellular networks, it is show…
Typical receiver processing, targeting always the best achievable bit error rate performance, can result in a waste of resources, especially, when the transmission conditions are such that the best performance is orders of magnitude better than the required. In this work, a processing framework is proposed which allows adjusting the processing requirements to the transmission conditions and the required bit error rate. It applies a-posteriori probability receivers operating over multiple-input multiple-output channels. It is demonstrated that significant complexity savings can be achieved both…
Analog to Digital Converters (ADCs) are a major contributor to the energy consumption on the receiver side of millimeter-wave multiple-input multiple-output (MIMO) systems with large antenna arrays. Consequently, there has been significant interest in using low-resolution ADCs along with hybrid beam-forming at MIMO receivers for energy efficiency. However, decreasing the ADC resolution results in performance loss -- in terms of achievable rates -- due to increased quantization error. In this work, we study the application of practically implementable nonlinear analog operations, prior to sampl…
We propose a decentralized receiver for extra-large multiple-input multiple-output (XL-MIMO) arrays. Our method operates with no central processing unit (CPU) and all the signal detection tasks are done in distributed nodes. We exploit a combined message-passing framework to design an uncoordinated detection scheme that overcomes three major challenges in the XL-MIMO systems: computational complexity, scalability and non-stationarities in user energy distribution. Our numerical evaluations show a significant performance improvement compared to benchmark distributed methods while operating very…
This paper proposes a joint transmitter-receiver design to minimize the weighted sum power under the post-processing signal-to-interference-and-noise ratio (post-SINR) constraints for all subchannels. Simulation results demonstrate that the algorithm can not only satisfy the post-SINR constraints but also easily adjust the power distribution among the users by changing the weights accordingly. Hence the algorithm can be used to alleviates the adjacent cell interference by reducing the transmitting power to the edge users without performance penalty.
The capacity of a discrete-time multi-input multi-output (MIMO) Gaussian channel with output quantization is investigated for different receiver architectures. A general formulation of this problem is proposed in which the antenna outputs are processed by analog combiners while sign quantizers are used for analog-to-digital conversion. To exemplify this approach, four analog receiver architectures of varying generality and complexity are considered: (a) multiple antenna selection and sign quantization of the antenna outputs, (b) single antenna selection and multilevel quantization, (c) multipl…
A low cost solution for constructing receiver signal points is investigated that combines a large number of constrained radio frequency (RF) frontends with a limited number of full RF chains. The constrained RF front ends have low cost and are limited to on/off switching of antenna elements and a small number of phases. Severe degradations are typically observed for multi-user MIMO for these simple on/off antenna arrays. A few full RF frontends are shown to compensate for the signal errors of the high number of constrained RF frontends for various scenarios. An algorithm for such a hybrid RF (…
In this paper, we address the message-passing receiver design for the 3D massive MIMO-OFDM systems. With the aid of the central limit argument and Taylor-series approximation, a computationally efficient receiver that performs joint channel estimation and decoding is devised by the framework of expectation propagation. Specially, the local belief defined at the channel transition function is expanded up to the second order with Wirtinger calculus, to transform the messages sent by the channel transition function to a tractable form. As a result, the channel impulse response (CIR) between each …
The problem of max-min signal-to-interference plus noise ratio (SINR) for uplink transmission of cell-free massive multiple-input multiple-output (MIMO) system is considered. We assume that the system is employed with local minimum mean square error (L-MMSE) combining. The objective is to preserve user fairness by solving max-min SINR optimization problem, by optimizing transmit power of each user equipment (UE) and weighting coefficients at central processing unit (CPU), subject to transmit power constraints of UEs. This problem is not jointly convex. Hence, we decompose original problem into…
An adaptive joint power allocation (JPA) and linear receiver design algorithm using the minimum bit error rate (MBER) criterion for a cooperative Multiple-Input Multiple-Output (MIMO) network is proposed. The system employs multiple relays with Distributed Space-Time Coding (DSTC) schemes and an Amplify-and-Forward (AF) strategy. It is designed according to a joint constrained optimization algorithm to determine the MBER power allocation parameters and the receive filter parameters for each transmitted symbol. The simulation results indicate that the proposed algorithm obtains performance gain…
In this paper, we investigate the spectral efficiency (SE) of massive multiple-input multiple-output (MIMO) systems with a large number of antennas at the base station (BS) accounting for physical space constraints. In contrast to the vast body of related literature, which considers fixed inter-element spacing, we elaborate on a practical topology in which an increase in the number of antennas in a fixed total space induces an inversely proportional decrease in the inter-antenna distance. For this scenario, we derive exact and approximate expressions, as well as simplified upper/lower bounds, …
This paper investigated the uplink of multi-user massive multi-input multi-output (MIMO) systems with a mixed analog-to-digital converter (ADC) receiver architecture, in which some antennas are equipped with costly full-resolution ADCs and others with less expensive low-resolution ADCs. A closed-form approximation of the achievable spectral efficiency (SE) with the maximum-ratio combining (MRC) detector is derived. Based on this approximated result, the effects of the number of base station antennas, the transmit power, the proportion of full-resolution ADCs in the mixed-ADC structure, and the…
The fundamental limits of communication over multiple-input multiple-output (MIMO) networks are considered when a limited number of one-bit analog to digital converters (ADC) are used at the receiver terminals. Prior works have mainly focused on point-to-point communications, where receiver architectures consisting of a concatenation of an analog processing module, a limited number of one-bit ADCs with non-adaptive thresholds, and a digital processing module are considered. In this work, a new receiver architecture is proposed which utilizes adaptive threshold one-bit ADCs - where the ADC thre…
